Searcharxiv⌕ Search

arXiv subjects

Steve Blandino

Publications and source records attributed to Steve Blandino.

8 recordsLinked to original sources

Multi-TRP Assisted UAV Detection in 3GPP 5G-Advanced ISAC Network

ISAC is currently being standardized within the 3GPP New Radio (NR) to enable cellular infrastructure to perform sensing using existing communication waveforms. While standardization is progressing, practical deployment may be limited by scenario-dependent observability constraints. For example, in UMa-AV scenarios, sensing with a single TRP can be affected by restricted angular coverage, partial blockage, and limited field of view, which may degrade detection reliability in three-dimensional UAV environments. For this reason, multi-TRP solutions have been suggested to improve spatial diversity and sensing robustness. In this paper, we present a system-level investigation of multi-TRP assisted monostatic sensing for UAV detection under standardized 3GPP UMa-AV channel assumptions and Release 19 evaluation parameters. We propose a spatial diversity fusion framework and evaluate the achievable performance of a 3GPP network by combining the measurements obtained independently at different TRP. Extensive evaluations demonstrate that multi-TRP assistance improves target observability, reduces spurious detections, and tightens localization error distributions at the cost of additional sensing overhead due to the need for multiple TRPs to periodically allocate radio resources for sensing measurements. In the evaluated scenario, results show that a voting threshold of two assisting TRPs achieves an optimal trade-off between miss detection probability and false alarm suppression, meeting 3GPP performance objectives. Furthermore, we quantify the sensing overhead and show that proper system design, tuned to the application requirements, can substantially reduce its impact: for example, extending the sensing refresh interval beyond the 128 ms coherent processing interval to 1 s reduces the effective overhead from 29 % to approximately 3.7 %, enabling more scalable network deployment.

cs.IT↗

Evaluation of gNB Monostatic Sensing for UAV Use Case

3GPP Release 19 has initiated the standardization of integrated sensing and communications (ISAC), including a channel model for monostatic sensing, evaluation scenarios, and performance assessment methodologies. These common assumptions provide an important basis for ISAC evaluation, but reproducible end-to-end studies still require a transparent sensing implementation. This paper evaluates 5G New Radio (NR) base station (gNB)-based monostatic sensing for the Unmanned Aerial Vehicle (UAV) use case using a 5G NR downlink Cyclic Prefix-Orthogonal Frequency Division Multiplexing (CP-OFDM) waveform and positioning reference signals (PRS), following 3GPP Urban Macro-Aerial Vehicle (UMa-AV) scenario assumptions. We present an end-to-end processing chain for multi-target detection and 3D localization, achieving more than 70% detection probability with less than 5% false alarm rate, in the considered scenario. For correctly detected targets, localization errors are on the order of a few meters, with a 90th-percentile error of 4m and 6m in the vertical and horizontal directions, respectively. To support reproducible baseline studies and further research, we release the simulator 5GNRad, which reproduces our evaluation

eess.SP↗

Semantically Annotated Multimodal Dataset for RF Interpretation and Prediction

Current limitations in wireless modeling and radio frequency (RF)-based AI are primarily driven by a lack of high-quality, measurement-based datasets that connect RF signals to their physical environments. RF heatmaps, the typical form of such data, are high-dimensional and complex but lack the geometric and semantic context needed for interpretation, constraining the development of supervised machine learning models. To address this bottleneck, we propose a new class of multimodal datasets that combines RF measurements with auxiliary modalities like high-resolution cameras and lidar to bridge the gap between RF signals and their physical causes. The proposed data collection will span diverse indoor and outdoor environments, featuring both static and dynamic scenarios, including human activities ranging from walking to subtle gestures. By achieving precise spatial and temporal co-registration and creating digital replicas for voxel-level annotation, this dataset will enable transformative AI research. Key tasks include the forward problem of predicting RF heatmaps from visual data to revolutionize wireless system design, and the inverse problem of inferring scene semantics from RF signals, creating a new form of RF-based perception.

cs.ET↗

Detecting Airborne Objects with 5G NR Radars

The integration of sensing capabilities into 5G New Radio (5G NR) networks offers an opportunity to enable the detection of airborne objects without the need for dedicated radars. This paper investigates the feasibility of using standardized Positioning Reference Signals (PRS) to detect UAVs in Urban Micro (UMi) and Urban Macro (UMa) propagation environments. A full 5G NR radar processing chain is implemented, including clutter suppression, angle and range estimation, and 3D position reconstruction. Simulation results show that performance strongly depends on the propagation environment. 5G NR radars exhibit the highest missed detection rate, up to 16%, in UMi, due to severe clutter. Positioning error increases with target distance, resulting in larger errors in UMa scenarios and at higher UAV altitudes. In particular, the system achieves a position error within 4m in the UMi environment and within 8m in UMa. The simulation platform has been released as open-source software to support reproducible research in integrated sensing and communication (ISAC) systems.

eess.SP↗

Algorithm-Supervised Millimeter Wave Indoor Localization using Tiny Neural Networks

The quasi-optical propagation of millimeter-wave signals enables high-accuracy localization algorithms that employ geometric approaches or machine learning models. However, most algorithms require information on the indoor environment, may entail the collection of large training datasets, or bear an infeasible computational burden for commercial off-the-shelf (COTS) devices. In this work, we propose to use tiny neural networks (NNs) to learn the relationship between angle difference-of-arrival (ADoA) measurements and locations of a receiver in an indoor environment. To relieve training data collection efforts, we resort to a self-supervised approach by bootstrapping the training of our neural network through location estimates obtained from a state-of-the-art localization algorithm. We evaluate our scheme via mmWave measurements from indoor 60-GHz double-directional channel sounding. We process the measurements to yield dominant multipath components, use the corresponding angles to compute ADoA values, and finally obtain location fixes. Results show that the tiny NN achieves sub-meter errors in 74% of the cases, thus performing as good as or even better than the state-of-the-art algorithm, with significantly lower computational complexity.

eess.SP↗

Sensing Performance of the IEEE 802.11bf Protocol and Its Impact on Data Communication

Wi-Fi sensing has been used to detect and track movements in an environment, resulting in the emergence of several innovative applications. Wi-Fi sensing can detect movement and locate objects by analyzing variations in the Wi-Fi signal due to its interaction with moving objects. Until recently, Wi-Fi sensing has been primarily available through proprietary solutions, which has limited its adoption. However, the recent initiative by the IEEE to develop the IEEE 802.11bf standard promises to make the adoption of Wi-Fi sensing widespread. Although Wi-Fi sensing procedures in communication standards can be overhead, there is currently a lack of literature exploring the sensing performance of Wi-Fi sensing procedures specified in the IEEE 802.11bf standard and its impact on data communication. Therefore, this paper presents a comprehensive evaluation of the sensing performance of the IEEE 802.11bf protocol and its impact on data communication in different configurations. Our findings expose the limitations of specific configurations and pave the way to provide guidance on efficient operating configurations of an IEEE 802.11bf network.

cs.NI↗

A Blind Beam Tracking Scheme for Millimeter Wave Systems

Millimeter-wave is one of the technologies powering the new generation of wireless communication systems. To compensate the high path-loss, millimeter-wave devices need to use highly directional antennas. Consequently, beam misalignment causes strong performance degradation reducing the link throughput or even provoking a complete outage. Conventional solutions, e.g. IEEE 802.11ad, propose the usage of additional training sequences to track beam misalignment. These methods however introduce significant overhead especially in dynamic scenarios. In this paper we propose a beamforming scheme that can reduce this overhead. First, we propose an algorithm to design a codebook suitable for mobile scenarios. Secondly, we propose a blind beam tracking algorithm based on particle filter, which describes the angular position of the devices with a posterior density function constructed by particles. The proposed scheme reduces by more than 80% the overhead caused by additional training sequences.

eess.SP↗

Multi-User Frequency-Selective Hybrid MIMO Demonstrated Using 60 GHz RF Modules

Given the high throughput requirement for 5G, merging millimeter wave technologies and multi-user MIMO seems a very promising strategy. As hardware limitations impede to realize a full digital architecture, hybrid MIMO architectures, using digital precoding and phased antenna arrays, are considered a feasible solution to implement multi-user MIMO at millimeter wave. However, real channel propagation and hardware non-idealities can significantly degrade the performance of such systems. Experimenting the new architecture is thus crucial to confirm and to support system design. Nevertheless, hybrid MIMO systems are not yet understood as the effects of the wide channel bandwidths at millimeter wave, the non-ideal RF front end as well as the imperfections of the analog beamforming are often neglected. In this paper, we present a 60 GHz MU-MIMO testbed using phased antenna arrays at both transmitter and receiver. The base station equipped with a 32 phased antenna array allocates simultaneously two users. We show that frequency selective hybrid precoding can efficiently suppress inter-user interference enabling spatial multiplexing in interference limited scenario doubling the throughput compared to a SISO scenario and compensating the frequency fluctuation of the channel. In addition, we report an EVM constellation improvement of 6 dB when comparing the hybrid MIMO architecture with a fully analog architecture.

cs.IT↗