Searcharxiv⌕ Search

arXiv subjects

Steven G. Johnson

Publications and source records attributed to Steven G. Johnson.

At least 145 records · Page 8Linked to original sources

Casimir repulsion beyond the dipole regime

We extend a previous result [Phys. Rev. Lett. 105, 090403 (2010)] on Casimir repulsion between a plate with a hole and a cylinder centered above it to geometries in which the central object can no longer be treated as a point dipole. We show through numerical calculations that as the distance between the plate and central object decreases, there is an intermediate regime in which the repulsive force increases dramatically. Beyond this, the force rapidly switches over to attraction as the separation decreases further to zero, in line with the proximity force approximation. We demonstrate that this effect can be understood as a competition between an increased repulsion due to a larger polarizability of the central object interacting with increased fringing fields near the edge of the plate, and attractive forces due primarily to the nonzero thickness of the plate. In comparison with our previous work, we find that using the same plate geometry but replacing the single cylinder with a ring of cylinders, or more generally an extended uniaxial conductor, the repulsive force can be enhanced by a factor of approximately $10^3$. We conclude that this enhancement, although quite dramatic, is still too small to yield detectable repulsive Casimir forces.

quant-ph↗

Designing evanescent optical interactions to control the expression of Casimir forces in optomechanical structures

We propose an optomechanical structure consisting of a photonic-crystal (holey) membrane suspended above a layered silicon-on-insulator substrate in which resonant bonding/antibonding optical forces created by externally incident light from above enable all-optical control and actuation of stiction effects induced by the Casimir force. In this way, one can control how the Casimir force is expressed in the mechanical dynamics of the membrane, not by changing the Casimir force directly but by optically modifying the geometry and counteracting the mechanical spring constant to bring the system in or out of regimes where Casimir physics dominate. The same optical response (reflection spectrum) of the membrane to the incident light can be exploited to accurately measure the effects of the Casimir force on the equilibrium separation of the membrane.

physics.optics↗

Casimir micro-sphere diclusters and three-body effects in fluids

Our previous article [Phys. Rev. Lett. 104, 060401 (2010)] predicted that Casimir forces induced by the material-dispersion properties of certain dielectrics can give rise to stable configurations of objects. This phenomenon was illustrated via a dicluster configuration of non-touching objects consisting of two spheres immersed in a fluid and suspended against gravity above a plate. Here, we examine these predictions from the perspective of a practical experiment and consider the influence of non-additive, three-body, and nonzero-temperature effects on the stability of the two spheres. We conclude that the presence of Brownian motion reduces the set of experimentally realizable silicon/teflon spherical diclusters to those consisting of layered micro-spheres, such as the hollow- core (spherical shells) considered here.

quant-ph↗

Bonding, antibonding and tunable optical forces in asymmetric membranes

We demonstrate that tunable attractive (bonding) and repulsive (anti-bonding) forces can arise in highly asymmetric structures coupled to external radiation, a consequence of the bonding/anti-bonding level repulsion of guided-wave resonances that was first predicted in symmetric systems. Our focus is a geometry consisting of a photonic-crystal (holey) membrane suspended above an unpatterned layered substrate, supporting planar waveguide modes that can couple via the periodic modulation of the holey membrane. Asymmetric geometries have a clear advantage in ease of fabrication and experimental characterization compared to symmetric double-membrane structures. We show that the asymmetry can also lead to unusual behavior in the force magnitudes of a bonding/antibonding pair as the membrane separation changes, including nonmonotonic dependences on the separation. We propose a computational method that obtains the entire force spectrum via a single time-domain simulation, by Fourier-transforming the response to a short pulse and thereby obtaining the frequency-dependent stress tensor. We point out that by operating with two, instead of a single frequency, these evanescent forces can be exploited to tune the spring constant of the membrane without changing its equilibrium separation.

physics.optics↗

Degenerate four-wave mixing in triply-resonant Kerr cavities

We demonstrate theoretical conditions for highly-efficient degenerate four-wave mixing in triply-resonant nonlinear (Kerr) cavities. We employ a general and accurate temporal coupled-mode analysis in which the interaction of light in arbitrary microcavities is expressed in terms a set of coupling coefficients that we rigorously derive from the full Maxwell equations. Using the coupled-mode theory, we show that light consisting of an input signal of frequency $ω_0-Δω$ can, in the presence of pump light at $ω_0$, be converted with quantum-limited efficiency into an output shifted signal of frequency $ω_0 + Δω$, and we derive expressions for the critical input powers at which this occurs. We find that critical powers in the order of 10mW assuming very conservative cavity parameters (modal volumes $\sim10$ cubic wavelengths and quality factors $\sim1000$. The standard Manley-Rowe efficiency limits are obtained from the solution of the classical coupled-mode equations, although we also derive them from simple photon-counting "quantum" arguments. Finally, using a linear stability analysis, we demonstrate that maximal conversion efficiency can be retained even in the presence of self- and cross-phase modulation effects that generally act to disrupt the resonance condition.

physics.optics↗

Calculation of nonzero-temperature Casimir forces in the time domain

We show how to compute Casimir forces at nonzero temperatures with time-domain electromagnetic simulations, for example using a finite-difference time-domain (FDTD) method. Compared to our previous zero-temperature time-domain method, only a small modification is required, but we explain that some care is required to properly capture the zero-frequency contribution. We validate the method against analytical and numerical frequency-domain calculations, and show a surprising high-temperature disappearance of a non-monotonic behavior previously demonstrated in a piston-like geometry.

quant-ph↗

Numerical methods for computing Casimir interactions

We review several different approaches for computing Casimir forces and related fluctuation-induced interactions between bodies of arbitrary shapes and materials. The relationships between this problem and well known computational techniques from classical electromagnetism are emphasized. We also review the basic principles of standard computational methods, categorizing them according to three criteria---choice of problem, basis, and solution technique---that can be used to classify proposals for the Casimir problem as well. In this way, mature classical methods can be exploited to model Casimir physics, with a few important modifications.

quant-ph↗

Casimir repulsion between metallic objects in vacuum

We give an example of a geometry in which two metallic objects in vacuum experience a repulsive Casimir force. The geometry consists of an elongated metal particle centered above a metal plate with a hole. We prove that this geometry has a repulsive regime using a symmetry argument and confirm it with numerical calculations for both perfect and realistic metals. The system does not support stable levitation, as the particle is unstable to displacements away from the symmetry axis.

cond-mat.stat-mech↗

Is the electrostatic force between a point charge and a neutral metallic object always attractive?

We give an example of a geometry in which the electrostatic force between a point charge and a neutral metallic object is repulsive. The example consists of a point charge centered above a thin metallic hemisphere, positioned concave up. We show that this geometry has a repulsive regime using both a simple analytical argument and an exact calculation for an analogous two-dimensional geometry. Analogues of this geometry-induced repulsion can appear in many other contexts, including Casimir systems.

physics.class-ph↗

Microstructure Effects for Casimir Forces in Chiral Metamaterials

We examine a recent prediction for the chirality-dependence of the Casimir force in chiral metamaterials by numerical computation of the forces between the exact microstructures, rather than homogeneous approximations. We compute the exact force for a chiral bent-cross pattern, as well as forces for an idealized "omega"-particle medium in the dilute approximation and identify the effects of structural inhomogeneity (i.e. proximity forces and anisotropy). We find that these microstructure effects dominate the force for separations where chirality was predicted to have a strong influence. To get observations of chirality free from microstructure effects, one must go to large separations where the effect of chirality is at most $\sim10^{-4}$ of the total force.

quant-ph↗

Delay-bandwidth and delay-loss limitations for cloaking of large objects

Based on a simple model of ground-plane cloaking, we argue that the diffculty of cloaking is fundamentally limited by delay-loss and delaylbandwidth/size limitations that worsen as the size of the object to be cloaked increases relative to the wavelength. These considerations must be taken into account when scaling experimental cloaking demonstrations from wavelength-scale objects towards larger sizes, and suggest quantitative material/loss challenges in cloaking human-scale objects.

physics.optics↗

Sufficient conditions for two-dimensional localization by arbitrarily weak defects in periodic potentials with band gaps

We prove, via an elementary variational method, 1d and 2d localization within the band gaps of a periodic Schrodinger operator for any mostly negative or mostly positive defect potential, V, whose depth is not too great compared to the size of the gap. In a similar way, we also prove sufficient conditions for 1d and 2d localization below the ground state of such an operator. Furthermore, we extend our results to 1d and 2d localization in d dimensions; for example, a linear or planar defect in a 3d crystal. For the case of D-fold degenerate band edges, we also give sufficient conditions for localization of up to D states.

cond-mat.other↗

A novel boundary element method using surface conductive absorbers for full-wave analysis of 3-D nanophotonics

Fast surface integral equation (SIE) solvers seem to be ideal approaches for simulating 3-D nanophotonic devices, as these devices generate fields both in an interior channel and in the infinite exterior domain. However, many devices of interest, such as optical couplers, have channels that can not be terminated without generating reflections. Generating absorbers for these channels is a new problem for SIE methods, as the methods were initially developed for problems with finite surfaces. In this paper we show that the obvious approach for eliminating reflections, making the channel mildly conductive outside the domain of interest, is inaccurate. We describe a new method, in which the absorber has a gradually increasing surface conductivity; such an absorber can be easily incorporated in fast integral equation solvers. Numerical experiments from a surface-conductivity modified FFT-accelerated PMCHW-based solver are correlated with analytic results, demonstrating that this new method is orders of magnitude more effective than a volume absorber, and that the smoothness of the surface conductivity function determines the performance of the absorber. In particular, we show that the magnitude of the transition reflection is proportional to 1/L^(2d+2), where L is the absorber length and d is the order of the differentiability of the surface conductivity function.

physics.comp-ph↗

Achieving a Strongly Temperature-Dependent Casimir Effect

We propose a method of achieving large temperature sensitivity in the Casimir force that involves measuring the stable separation between dielectric objects immersed in fluid. We study the Casimir force between slabs and spheres using realistic material models, and find large > 2nm/K variations in their stable separations (hundreds of nanometers) near room temperature. In addition, we analyze the effects of Brownian motion on suspended objects, and show that the average separation is also sensitive to changes in temperature . Finally, this approach also leads to rich qualitative phenomena, such as irreversible transitions, from suspension to stiction, as the temperature is varied.

quant-ph↗

Non-touching nanoparticle diclusters bound by repulsive and attractive Casimir forces

We present a scheme for obtaining stable Casimir suspension of dielectric nontouching objects immersed in a fluid, validated here in various geometries consisting of ethanol-separated dielectric spheres and semi-infinite slabs. Stability is induced by the dispersion properties of real dielectric (monolithic) materials. A consequence of this effect is the possibility of stable configurations (clusters) of compact objects, which we illustrate via a "molecular" two-sphere dicluster geometry consiting of two bound spheres levitated above a gold slab. Our calculations also reveal a strong interplay between material and geometric dispersion, and this is exemplified by the qualitatively different stability behavior observed in planar versus spherical geometries.

quant-ph↗

Casimir forces in the time domain II: Applications

Our preceding paper introduced a method to compute Casimir forces in arbitrary geometries and for arbitrary materials that was based on a finite-difference time-domain (FDTD) scheme. In this manuscript, we focus on the efficient implementation of our method for geometries of practical interest and extend our previous proof-of-concept algorithm in one dimension to problems in two and three dimensions, introducing a number of new optimizations. We consider Casimir piston-like problems with nonmonotonic and monotonic force dependence on sidewall separation, both for previously solved geometries to validate our method and also for new geometries involving magnetic sidewalls and/or cylindrical pistons. We include realistic dielectric materials to calculate the force between suspended silicon waveguides or on a suspended membrane with periodic grooves, also demonstrating the application of PML absorbing boundaries and/or periodic boundaries. In addition we apply this method to a realizable three-dimensional system in which a silica sphere is stably suspended in a fluid above an indented metallic substrate. More generally, the method allows off-the-shelf FDTD software, already supporting a wide variety of materials (including dielectric, magnetic, and even anisotropic materials) and boundary conditions, to be exploited for the Casimir problem.

quant-ph↗

Efficient Terahertz Generation in Triply Resonant Nonlinear Photonic Crystal Microcavities

We propose a scheme for efficient cavity-enhanced nonlinear THz generation via difference-frequency generation (DFG) processes using a triply resonant system based on photonic crystal cavities. We show that high nonlinear overlap can be achieved by coupling a THz cavity to a doubly-resonant, dual-polarization near-infrared (e.g. telecom band) photonic-crystal nanobeam cavity, allowing the mixing of three mutually orthogonal fundamental cavity modes through a chi(2) nonlinearity. We demonstrate through coupled-mode theory that complete depletion of the pump frequency - i.e., quantum-limited conversion - is possible in an experimentally feasible geometry, with the operating output power at the point of optimal total conversion efficiency adjustable by varying the mode quality (Q) factors.

physics.optics↗

Spherical cloaking using nonlinear transformations for improved segmentation into concentric isotropic coatings

Two novel classes of spherical invisibility cloaks based on nonlinear transformation have been studied. The cloaking characteristics are presented by segmenting the nonlinear transformation based spherical cloak into concentric isotropic homogeneous coatings. Detailed investigations of the optimal discretization (e.g., thickness control of each layer, nonlinear factor, etc.) are presented for both linear and nonlinear spherical cloaks and their effects on invisibility performance are also discussed. The cloaking properties and our choice of optimal segmentation are verified by the numerical simulation of not only near-field electric-field distribution but also the far-field radar cross section (RCS).

physics.optics↗