arXiv subjects

Steven L. Brunton

Publications and source records attributed to Steven L. Brunton.

At least 181 records · Page 10Linked to original sources

arXiv2018

Data-driven identification of parametric partial differential equations

In this work we present a data-driven method for the discovery of parametric partial differential equations (PDEs), thus allowing one to disambiguate between the underlying evolution equations and their parametric dependencies. Group sparsity is used to ensure parsimonious representations of observed dynamics in the form of a parametric PDE, while also allowing the coefficients to have arbitrary time series, or spatial dependence. This work builds on previous methods for the identification of constant coefficient PDEs, expanding the field to include a new class of equations which until now have eluded machine learning based identification methods. We show that group sequentially thresholded ridge regression outperforms group LASSO in identifying the fewest terms in the PDE along with their parametric dependency. The method is demonstrated on four canonical models with and without the introduction of noise.

math.NA↗

arXiv2018

Sparse Identification of Nonlinear Dynamics for Rapid Model Recovery

Big data has become a critically enabling component of emerging mathematical methods aimed at the automated discovery of dynamical systems, where first principles modeling may be intractable. However, in many engineering systems, abrupt changes must be rapidly characterized based on limited, incomplete, and noisy data. Many leading automated learning techniques rely on unrealistically large data sets and it is unclear how to leverage prior knowledge effectively to re-identify a model after an abrupt change. In this work, we propose a conceptual framework to recover parsimonious models of a system in response to abrupt changes in the low-data limit. First, the abrupt change is detected by comparing the estimated Lyapunov time of the data with the model prediction. Next, we apply the sparse identification of nonlinear dynamics (SINDy) regression to update a previously identified model with the fewest changes, either by addition, deletion, or modification of existing model terms. We demonstrate this sparse model recovery on several examples for abrupt system change detection in periodic and chaotic dynamical systems. Our examples show that sparse updates to a previously identified model perform better with less data, have lower runtime complexity, and are less sensitive to noise than identifying an entirely new model. The proposed abrupt-SINDy architecture provides a new paradigm for the rapid and efficient recovery of a system model after abrupt changes.

physics.data-an↗

arXiv2018

Discovery of Nonlinear Multiscale Systems: Sampling Strategies and Embeddings

A major challenge in the study of dynamical systems is that of model discovery: turning data into models that are not just predictive, but provide insight into the nature of the underlying dynamical system that generated the data. This problem is made more difficult by the fact that many systems of interest exhibit diverse behaviors across multiple time scales. We introduce a number of data-driven strategies for discovering nonlinear multiscale dynamical systems and their embeddings from data. We consider two canonical cases: (i) systems for which we have full measurements of the governing variables, and (ii) systems for which we have incomplete measurements. For systems with full state measurements, we show that the recent sparse identification of nonlinear dynamical systems (SINDy) method can discover governing equations with relatively little data and introduce a sampling method that allows SINDy to scale efficiently to problems with multiple time scales. Specifically, we can discover distinct governing equations at slow and fast scales. For systems with incomplete observations, we show that the Hankel alternative view of Koopman (HAVOK) method, based on time-delay embedding coordinates, can be used to obtain a linear model and Koopman invariant measurement system that nearly perfectly captures the dynamics of nonlinear quasiperiodic systems. We introduce two strategies for using HAVOK on systems with multiple time scales. Together, our approaches provide a suite of mathematical strategies for reducing the data required to discover and model nonlinear multiscale systems.

math.DS↗

arXiv2018

Greedy Sensor Placement with Cost Constraints

The problem of optimally placing sensors under a cost constraint arises naturally in the design of industrial and commercial products, as well as in scientific experiments. We consider a relaxation of the full optimization formulation of this problem and then extend a well-established QR-based greedy algorithm for the optimal sensor placement problem without cost constraints. We demonstrate the effectiveness of this algorithm on data sets related to facial recognition, climate science, and fluid mechanics. This algorithm is scalable and often identifies sparse sensors with near optimal reconstruction performance, while dramatically reducing the overall cost of the sensors. We find that the cost-error landscape varies by application, with intuitive connections to the underlying physics. Additionally, we include experiments for various pre-processing techniques and find that a popular technique based on the singular value decomposition is often sub-optimal.

math.OC↗

arXiv2018

Neural-inspired sensors enable sparse, efficient classification of spatiotemporal data

Sparse sensor placement is a central challenge in the efficient characterization of complex systems when the cost of acquiring and processing data is high. Leading sparse sensing methods typically exploit either spatial or temporal correlations, but rarely both. This work introduces a new sparse sensor optimization that is designed to leverage the rich spatiotemporal coherence exhibited by many systems. Our approach is inspired by the remarkable performance of flying insects, which use a few embedded strain-sensitive neurons to achieve rapid and robust flight control despite large gust disturbances. Specifically, we draw on nature to identify targeted neural-inspired sensors on a flapping wing to detect body rotation. This task is particularly challenging as the rotational twisting mode is three orders-of-magnitude smaller than the flapping modes. We show that nonlinear filtering in time, built to mimic strain-sensitive neurons, is essential to detect rotation, whereas instantaneous measurements fail. Optimized sparse sensor placement results in efficient classification with approximately ten sensors, achieving the same accuracy and noise robustness as full measurements consisting of hundreds of sensors. Sparse sensing with neural inspired encoding establishes a new paradigm in hyper-efficient, embodied sensing of spatiotemporal data and sheds light on principles of biological sensing for agile flight control.

math.OC↗

arXiv2018

Deep learning for universal linear embeddings of nonlinear dynamics

Identifying coordinate transformations that make strongly nonlinear dynamics approximately linear is a central challenge in modern dynamical systems. These transformations have the potential to enable prediction, estimation, and control of nonlinear systems using standard linear theory. The Koopman operator has emerged as a leading data-driven embedding, as eigenfunctions of this operator provide intrinsic coordinates that globally linearize the dynamics. However, identifying and representing these eigenfunctions has proven to be mathematically and computationally challenging. This work leverages the power of deep learning to discover representations of Koopman eigenfunctions from trajectory data of dynamical systems. Our network is parsimonious and interpretable by construction, embedding the dynamics on a low-dimensional manifold that is of the intrinsic rank of the dynamics and parameterized by the Koopman eigenfunctions. In particular, we identify nonlinear coordinates on which the dynamics are globally linear using a modified auto-encoder. We also generalize Koopman representations to include a ubiquitous class of systems that exhibit continuous spectra, ranging from the simple pendulum to nonlinear optics and broadband turbulence. Our framework parametrizes the continuous frequency using an auxiliary network, enabling a compact and efficient embedding at the intrinsic rank, while connecting our models to half a century of asymptotics. In this way, we benefit from the power and generality of deep learning, while retaining the physical interpretability of Koopman embeddings.

math.DS↗

arXiv2018

Diffusion Maps meet Nyström

Diffusion maps are an emerging data-driven technique for non-linear dimensionality reduction, which are especially useful for the analysis of coherent structures and nonlinear embeddings of dynamical systems. However, the computational complexity of the diffusion maps algorithm scales with the number of observations. Thus, long time-series data presents a significant challenge for fast and efficient embedding. We propose integrating the Nyström method with diffusion maps in order to ease the computational demand. We achieve a speedup of roughly two to four times when approximating the dominant diffusion map components.

stat.ML↗

arXiv2017

Optimized Sampling for Multiscale Dynamics

The characterization of intermittent, multiscale and transient dynamics using data-driven analysis remains an open challenge. We demonstrate an application of the Dynamic Mode Decomposition (DMD) with sparse sampling for the diagnostic analysis of multiscale physics. The DMD method is an ideal spatiotemporal matrix decomposition that correlates spatial features of computational or experimental data to periodic temporal behavior. DMD can be modified into a multiresolution analysis to separate complex dynamics into a hierarchy of multiresolution timescale components, where each level of the hierarchy divides dynamics into distinct background (slow) and foreground (fast) timescales. The multiresolution DMD is capable of characterizing nonlinear dynamical systems in an equation-free manner by recursively decomposing the state of the system into low-rank spatial modes and their temporal Fourier dynamics. Moreover, these multiresolution DMD modes can be used to determined sparse sampling locations which are nearly optimal for dynamic regime classification and full state reconstruction. Specifically, optimized sensors are efficiently chosen using QR column pivots of the DMD library, thus avoiding an NP-hard selection process. We demonstrate the efficacy of the method on several examples, including global sea-surface temperature data, and show that only a small number of sensors are needed for accurate global reconstructions and classification of El Niño events.

math.DS↗

arXiv2017

Dynamic mode decomposition for compressive system identification

Dynamic mode decomposition has emerged as a leading technique to identify spatiotemporal coherent structures from high-dimensional data, benefiting from a strong connection to nonlinear dynamical systems via the Koopman operator. In this work, we integrate and unify two recent innovations that extend DMD to systems with actuation [Proctor et al., 2016] and systems with heavily subsampled measurements [Brunton et al., 2015]. When combined, these methods yield a novel framework for compressive system identification [code is publicly available at: https://github.com/zhbai/cDMDc]. It is possible to identify a low-order model from limited input-output data and reconstruct the associated full-state dynamic modes with compressed sensing, adding interpretability to the state of the reduced-order model. Moreover, when full-state data is available, it is possible to dramatically accelerate downstream computations by first compressing the data. We demonstrate this unified framework on two model systems, investigating the effects of sensor noise, different types of measurements (e.g., point sensors, Gaussian random projections, etc.), compression ratios, and different choices of actuation (e.g., localized, broadband, etc.). In the first example, we explore this architecture on a test system with known low-rank dynamics and an artificially inflated state dimension. The second example consists of a real-world engineering application given by the fluid flow past a pitching airfoil at low Reynolds number. This example provides a challenging and realistic test-case for the proposed method, and results demonstrate that the dominant coherent structures are well characterized despite actuation and heavily subsampled data.

eess.SY↗

arXiv2017

Predicting shim gaps in aircraft assembly with machine learning and sparse sensing

A modern aircraft may require on the order of thousands of custom shims to fill gaps between structural components in the airframe that arise due to manufacturing tolerances adding up across large structures. These shims are necessary to eliminate gaps, maintain structural performance, and minimize pull-down forces required to bring the aircraft into engineering nominal configuration for peak aerodynamic efficiency. Gap filling is a time-consuming process, involving either expensive by-hand inspection or computations on vast quantities of measurement data from increasingly sophisticated metrology equipment. Either case amounts to significant delays in production, with much of the time spent in the critical path of aircraft assembly. This work presents an alternative strategy for predictive shimming, based on machine learning and sparse sensing to first learn gap distributions from historical data, and then design optimized sparse sensing strategies to streamline data collection and processing. This new approach is based on the assumption that patterns exist in shim distributions across aircraft, which may be mined and used to reduce the burden of data collection and processing in future aircraft. Specifically, robust principal component analysis is used to extract low-dimensional patterns in the gap measurements while rejecting outliers. Next, optimized sparse sensors are obtained that are most informative about the dimensions of a new aircraft in these low-dimensional principal components. We demonstrate the success of the proposed approach, called PIXel Identification Despite Uncertainty in Sensor Technology (PIXI-DUST), on historical production data from 54 representative Boeing commercial aircraft. Our algorithm successfully predicts $99\%$ of shim gaps within the desired measurement tolerance using $3\%$ of the laser scan points typically required; all results are cross-validated.

stat.ML↗

arXiv2017

Sparse-TDA: Sparse Realization of Topological Data Analysis for Multi-Way Classification

Topological data analysis (TDA) has emerged as one of the most promising techniques to reconstruct the unknown shapes of high-dimensional spaces from observed data samples. TDA, thus, yields key shape descriptors in the form of persistent topological features that can be used for any supervised or unsupervised learning task, including multi-way classification. Sparse sampling, on the other hand, provides a highly efficient technique to reconstruct signals in the spatial-temporal domain from just a few carefully-chosen samples. Here, we present a new method, referred to as the Sparse-TDA algorithm, that combines favorable aspects of the two techniques. This combination is realized by selecting an optimal set of sparse pixel samples from the persistent features generated by a vector-based TDA algorithm. These sparse samples are selected from a low-rank matrix representation of persistent features using QR pivoting. We show that the Sparse-TDA method demonstrates promising performance on three benchmark problems related to human posture recognition and image texture classification.

stat.ML↗

arXiv2017

Deep Learning and Model Predictive Control for Self-Tuning Mode-Locked Lasers

Self-tuning optical systems are of growing importance in technological applications such as mode-locked fiber lasers. Such self-tuning paradigms require {\em intelligent} algorithms capable of inferring approximate models of the underlying physics and discovering appropriate control laws in order to maintain robust performance for a given objective. In this work, we demonstrate the first integration of a {\em deep learning} (DL) architecture with {\em model predictive control} (MPC) in order to self-tune a mode-locked fiber laser. Not only can our DL-MPC algorithmic architecture approximate the unknown fiber birefringence, it also builds a dynamical model of the laser and appropriate control law for maintaining robust, high-energy pulses despite a stochastically drifting birefringence. We demonstrate the effectiveness of this method on a fiber laser which is mode-locked by nonlinear polarization rotation. The method advocated can be broadly applied to a variety of optical systems that require robust controllers.

cs.LG↗

arXiv2017

Data-Driven Sparse Sensor Placement for Reconstruction

Optimal sensor placement is a central challenge in the design, prediction, estimation, and control of high-dimensional systems. High-dimensional states can often leverage a latent low-dimensional representation, and this inherent compressibility enables sparse sensing. This article explores optimized sensor placement for signal reconstruction based on a tailored library of features extracted from training data. Sparse point sensors are discovered using the singular value decomposition and QR pivoting, which are two ubiquitous matrix computations that underpin modern linear dimensionality reduction. Sparse sensing in a tailored basis is contrasted with compressed sensing, a universal signal recovery method in which an unknown signal is reconstructed via a sparse representation in a universal basis. Although compressed sensing can recover a wider class of signals, we demonstrate the benefits of exploiting known patterns in data with optimized sensing. In particular, drastic reductions in the required number of sensors and improved reconstruction are observed in examples ranging from facial images to fluid vorticity fields. Principled sensor placement may be critically enabling when sensors are costly and provides faster state estimation for low-latency, high-bandwidth control. MATLAB code is provided for all examples.

math.OC↗

arXiv2017

Modal Analysis of Fluid Flows: An Overview

Simple aerodynamic configurations under even modest conditions can exhibit complex flows with a wide range of temporal and spatial features. It has become common practice in the analysis of these flows to look for and extract physically important features, or modes, as a first step in the analysis. This step typically starts with a modal decomposition of an experimental or numerical dataset of the flow field, or of an operator relevant to the system. We describe herein some of the dominant techniques for accomplishing these modal decompositions and analyses that have seen a surge of activity in recent decades. For a non-expert, keeping track of recent developments can be daunting, and the intent of this document is to provide an introduction to modal analysis that is accessible to the larger fluid dynamics community. In particular, we present a brief overview of several of the well-established techniques and clearly lay the framework of these methods using familiar linear algebra. The modal analysis techniques covered in this paper include the proper orthogonal decomposition (POD), balanced proper orthogonal decomposition (Balanced POD), dynamic mode decomposition (DMD), Koopman analysis, global linear stability analysis, and resolvent analysis.

physics.flu-dyn↗

arXiv2017

Networked oscillator based modeling and control of unsteady wakes

A networked oscillator based analysis is performed for periodic bluff body flows to examine and control the transfer of kinetic energy. Spatial modes extracted from the flow field with corresponding amplitudes form a set of oscillators describing unsteady fluctuations. These oscillators are connected through a network that captures the energy exchanges amongst them. To extract the network of interactions among oscillators, amplitude and phase perturbations are impulsively introduced to the oscillators and the ensuing dynamics are analyzed. Using linear regression techniques, a networked oscillator model is constructed that reveals energy transfers and phase interactions among the modes. The model captures the nonlinear interactions amongst the modal oscillators through a linear approximation. A large collection of system responses are aggregated into a network model that captures interactions for general perturbations. The networked oscillator model describes the modal perturbation dynamics better than the empirical Galerkin reduced-order models. A model-based feedback controller is then designed to suppress modal amplitudes and the resulting wake unsteadiness leading to drag reduction. The strength of the proposed approach is demonstrated for a canonical example of two- dimensional unsteady flow over a circular cylinder. The present formulation enables the characterization of modal interactions to control fundamental energy transfers in unsteady vortical flows.

physics.flu-dyn↗

arXiv2017

Sparse reduced-order modeling : Sensor-based dynamics to full-state estimation

We propose a general dynamic reduced-order modeling framework for typical experimental data: time-resolved sensor data and optional non-time-resolved PIV snapshots. This framework contains four steps. First, the sensor signals are lifted to a dynamic feature space. Second, we identify a sparse human-interpretable nonlinear dynamical system for the feature state based on the sparse identification of nonlinear dynamics (SINDy). Third, if PIV snapshots are available, a local linear mapping from the feature state to velocity fields is shown to be orders of magnitudes more accurate than optimal modal expansions of the same order. Fourth, a generalized feature-based modal decomposition identifies coherent structures that are most dynamically correlated with the linear and nonlinear interaction terms in the sparse model, adding interpretability. Steps 1 and 2 define a black-box model. Optional steps 3 and 4 lift the black-box dynamics to a 'gray-box' model of the coherent structures, if non-time-resolved full-state data is available. This gray-box modeling strategy is successfully applied to the transient and post-transient laminar cylinder wake, and compares favorably with a POD model. We foresee numerous applications of this highly flexible modeling strategy, including estimation, prediction and control. Moreover, the feature space may be based on intrinsic coordinates, which are unaffected by a key challenge of modal expansion: the slow change of low-dimensional coherent structures with changing geometry and varying parameters.

physics.flu-dyn↗

arXiv2017

Network Structure of Two-Dimensional Decaying Isotropic Turbulence

The present paper reports on our effort to characterize vortical interactions in complex fluid flows through the use of network analysis. In particular, we examine the vortex interactions in two-dimensional decaying isotropic turbulence and find that the vortical interaction network can be characterized by a weighted scale-free network. It is found that the turbulent flow network retains its scale-free behavior until the characteristic value of circulation reaches a critical value. Furthermore, we show that the two-dimensional turbulence network is resilient against random perturbations but can be greatly influenced when forcing is focused towards the vortical structures that are categorized as network hubs. These findings can serve as a network-analytic foundation to examine complex geophysical and thin-film flows and take advantage of the rapidly growing field of network theory, which complements ongoing turbulence research based on vortex dynamics, hydrodynamic stability, and statistics. While additional work is essential to extend the mathematical tools from network analysis to extract deeper physical insights of turbulence, an understanding of turbulence based on the interaction-based network-theoretic framework presents a promising alternative in turbulence modeling and control efforts.

physics.flu-dyn↗

arXiv2017

Environment Identification in Flight using Sparse Approximation of Wing Strain

This paper addresses the problem of identifying different flow environments from sparse data collected by wing strain sensors. Insects regularly perform this feat using a sparse ensemble of noisy strain sensors on their wing. First, we obtain strain data from numerical simulation of a Manduca sexta hawkmoth wing undergoing different flow environments. Our data-driven method learns low-dimensional strain features originating from different aerodynamic environments using proper orthogonal decomposition (POD) modes in the frequency domain, and leverages sparse approximation to classify a set of strain frequency signatures using a dictionary of POD modes. This bio-inspired machine learning architecture for dictionary learning and sparse classification permits fewer costly physical strain sensors while being simultaneously robust to sensor noise. A measurement selection algorithm identifies frequencies that best discriminate the different aerodynamic environments in low-rank POD feature space. In this manner, sparse and noisy wing strain data can be exploited to robustly identify different aerodynamic environments encountered in flight, providing insight into the stereotyped placement of neurons that act as strain sensors on a Manduca sexta hawkmoth wing.

physics.data-an↗