arXiv subjects

Su-Huai Wei

Publications and source records attributed to Su-Huai Wei.

At least 55 records · Page 3Linked to original sources

arXiv2017

Design of Lead-Free Inorganic Halide Perovskites for Solar Cells via Cation-Transmutation

Hybrid organic-inorganic halide perovskites with the prototype material of CH$_{3}$NH$_{3}$PbI$_{3}$ have recently attracted intense interest as low-cost and high-performance photovoltaic absorbers. Despite the high power conversion efficiency exceeding 20% achieved by their solar cells, two key issues -- the poor device stabilities associated with their intrinsic material instability and the toxicity due to water soluble Pb$^{2+}$ -- need to be resolved before large-scale commercialization. Here, we address these issues by exploiting the strategy of cation-transmutation to design stable inorganic Pb-free halide perovskites for solar cells. The idea is to convert two divalent Pb$^{2+}$ ions into one monovalent M$^{+}$ and one trivalent M$^{3+}$ ions, forming a rich class of quaternary halides in double-perovskite structure. We find through first-principles calculations this class of materials have good phase stability against decomposition and wide-range tunable optoelectronic properties. With photovoltaic-functionality-directed materials screening, we identify eleven optimal materials with intrinsic thermodynamic stability, suitable band gaps, small carrier effective masses, and low excitons binding energies as promising candidates to replace Pb-based photovoltaic absorbers in perovskite solar cells. The chemical trends of phase stabilities and electronic properties are also established for this class of materials, offering useful guidance for the development of perovskite solar cells fabricated with them.

cond-mat.mtrl-sci↗

arXiv2017

Atomic-ordering-induced quantum phase transition between topological crystalline insulator and Z2 topological insulator

Topological phase transition in a single material usually refers to transitions between a trivial band insulator and a topological Dirac phase, but the transition may also occur between different classes of topological Dirac phases. However, it is a fundamental challenge to realize quantum transition between Z2 nontrivial topological insulator (TI) and topological crystalline insulator (TCI) in one material because Z2 TI and TCI are hardly both co-exist in a single material due to their contradictory requirement on the number of band inversions. The Z2 TIs must have an odd number of band inversions over all the time-reversal invariant momenta, whereas, the newly discovered TCIs, as a distinct class of the topological Dirac materials protected by the underlying crystalline symmetry, owns an even number of band inversions. Here, take PbSnTe2 alloy as an example, we show that at proper alloy composition the atomic-ordering is an effective way to tune the symmetry of the alloy so that we can electrically switch between TCI phase and Z2 TI phase when the alloy is ordered from a random phase into a stable CuPt phase. Our results suggest that atomic-ordering provides a new platform to switch between different topological phases.

cond-mat.mtrl-sci↗

arXiv2017

Carrier providers or carrier killers: the case of Cu defects in CdTe solar cells

Defects play important roles in semiconductors for optoelectronic applications. Common intuition is that defects with shallow levels act as carrier providers and defects with deep levels are carrier killers. Here, taking the Cu defects in CdTe as an example, we show that shallow defects can play both roles. Using first-principles calculation methods combined with thermodynamic simulations, we study the dialectic effects of Cu-related defects on hole density and lifetime in bulk CdTe over a wide range of Cu incorporation conditions. Because CuCd can form a relatively shallow acceptor in CdTe, we find that increased Cu incorporation into CdTe indeed can help achieve high hole density; however, too much Cu can cause significant non-radiative recombination. We discuss two strategies to balance the contradictory effects of Cu defects based on the calculated impact of Cd chemical potential, copper defect concentrations, and incorporation temperature on lifetime and hole density. The results indicates that to optimize the Cu doping in CdTe, it is important to control the total amount of Cu incorporated into CdTe and optimize the match between the Cu incorporation temperature and the Cd chemical potential. These findings can help understand the roles of Cu defects in CdTe and the potential complex defect behaviors of relatively shallow defect states in semiconductors for optoelectronic applications.

cond-mat.mtrl-sci↗

arXiv2016

Earth-abundant and Non-toxic SiX (X=S, Se) Monolayers as Highly Efficient Thermoelectric Materials

Current thermoelectric (TE) materials often have low performance or contain less abundant and/or toxic elements, thus limiting their large-scale applications. Therefore, new TE materials with high efficiency and low cost are strongly desirable. Here we demonstrate that, SiS and SiSe monolayers made from non-toxic and earth-abundant elements intrinsically have low thermal conductivities arising from their low-frequency optical phonon branches with large overlaps with acoustic phonon modes, which is similar to the state-of-the-art experimentally demonstrated material SnSe with a layered structure. Together with high thermal power factors due to their two-dimensional nature, they show promising TE performances with large figure of merit (ZT) values exceeding 1 or 2 over a wide range of temperatures. We establish some basic understanding of identifying layered materials with low thermal conductivities, which can guide and stimulate the search and study of other layered materials for TE applications.

cond-mat.mtrl-sci↗

arXiv2016

Simultaneous band gap narrowing and carrier lifetime prolongation of organic-inorganic trihalide perovskites

The organic-inorganic hybrid lead trihalide perovskites have been emerging as the most attractive photovoltaic material. As regulated by Shockley-Queisser theory, a formidable materials science challenge for the next level improvement requires further band gap narrowing for broader absorption in solar spectrum, while retaining or even synergistically prolonging the carrier lifetime, a critical factor responsible for attaining the near-band gap photovoltage. Herein, by applying controllable hydrostatic pressure we have achieved unprecedented simultaneous enhancement in both band gap narrowing and carrier lifetime prolongation (up to 70~100% increase) under mild pressures at ~0.3 GPa. The pressure-induced modulation on pure hybrid perovskites without introducing any adverse chemical or thermal effect clearly demonstrates the importance of band edges on the photon-electron interaction and maps a pioneering route towards a further boost in their photovoltaic performance.

cond-mat.mtrl-sci↗

arXiv2016

Van der Waals metal-semiconductor junction: weak Fermi level pinning enables effective tuning of Schottky barrier

Two-dimensional (2D) semiconductors have shown great promise in (opto)electronic applications. However, their developments are limited by a large Schottky barrier (SB) at the metal-semiconductor junction (MSJ), which is difficult to tune by using conventional metals due to the strong Fermi level pinning (FLP) effect. Here we show that, this problem can be overcome by using 2D metals, which are bounded with 2D semiconductors through van der Waals (vdW) interaction. This success relies on a weak FLP at the vdW MSJ, which is attributed to the suppression of metal-induced gap states. Consequently, the SB becomes tunable and can vanish with proper 2D metals (e.g. H-NbS2). This work not only offers new insights into the fundamental properties of heterojunctions, but also uncovers great potential of 2D metals in device applications.

cond-mat.mes-hall↗

arXiv2015

Air passivation of chalcogen vacancies in two-dimensional semiconductors

Defects play important roles in semiconductors (SCs). Unlike those in bulk SCs, defects in two-dimensional (2D) SCs are exposed to the surrounding environment, which can potentially modify their properties/functions. Air is a common environment; yet its impact on the defects in 2D SCs still remains elusive. In this work, we unravel the interaction between air and chalcogen vacancies (VX)-the most typical defects in 2D SCs. We find that, although the interaction is weak for most molecules in air, O2 can be chemisorbed at VX with a barrier that correlates with the SC cohesive energy and can be overcame even at room temperature for certain SCs. Importantly, the chemisorbed O2 changes the VX from commonly-believed harmful carrier-traps to electronically benign sites. This unusual behavior originates from the iso-valence between O2 and X when bonded with metal. Based on these findings, we propose a facile approach to improve the performance of 2D SCs by using air to passivate the defects.

cond-mat.mtrl-sci↗

arXiv2015

Intrinsic Instability of the Hybrid Halide Perovskite Semiconductor CH3NH3PbI3

The organic-inorganic hybrid perovskite CH3NH3PbI3 has attracted significant interest for its high performance in converting solar light into electrical power with an efficiency exceeding 20%. Unfortunately, chemical stability is one major challenge in the development of the CH3NH3PbI3 solar cells. It was commonly assumed that moisture or oxygen in the environment causes the poor stability of hybrid halide perovskites, however, here we show from the first-principles calculations that the room-temperature tetragonal phase of CH3NH3PbI3 is thermodynamically unstable with respect to the phase separation into CH3NH3I + PbI2, i.e., the disproportionation is exothermic, independent of the humidity or oxygen in the atmosphere. When the structure is distorted to the low-temperature orthorhombic phase, the energetic cost of separation increases, but remains small. Contributions from vibrational and configurational entropy at room temperature have been considered, but the instability of CH3NH3PbI3 is unchanged. When I is replaced by Br or Cl, Pb by Sn, or the organic cation CH3NH3 by inorganic Cs, the perovskites become more stable and do not phase-separate spontaneously. Our study highlights that the poor chemical stability is intrinsic to CH3NH3PbI3 and suggests that element-substitution may solve the chemical stability problem in hybrid halide perovskite solar cells.

cond-mat.mtrl-sci↗

arXiv2014

Self-regulation mechanism for charged point defects in hybrid halide perovskites

Hybrid halide perovskites such as methylammonium lead iodide (CH3NH3PbI3) exhibit unusually low free carrier concentrations despite being processed at low-temperatures from solution. We demonstrate, through quantum mechanical calculations, that the origin of this phenomenon is a prevalence of ionic over electronic disorder in stoichiometric materials. Schottky defect formation provides a mechanism to self-regulate the concentration of charge carriers through ionic compensation of charged point defects. The equilibrium charged vacancy concentration is predicted to exceed 0.4% at room temperature. This behaviour, which goes against established defect conventions for inorganic semiconductors, has implications for photovoltaic performance.

cond-mat.mtrl-sci↗

arXiv2013

Structural stability of lattice-matched heterovalent semiconductor superlattices

Lattice-matched heterovalent alloys and superlattices have some unique physical properties. For example, their band gap can change by a large amount without significant change in their lattice constants, thus they have great potential for optelectronic applications. Using first-principles total energy calculation and Monte Carlo simulation as well as lattice harmonic expansion, we systematically study the stability of the heterovalent superlattices. We show that the chemical trend of stability of lattice-matched heterovalent superlattices is significantly different from lattice-mismatched isovalent superlattices, because for lattice-mismatched isovalent superlattices the stability is mostly determined by strain, whereas for lattice-matched nonisovalent superlattices the interfacial energy depend not only on the bond energy but also on the Coulomb energy derived from donor- and acceptor-like wrong bonds. In the short-period heterovalent superlattices, the abrupt [111] interface has the lowest energy even though it is polar, whereas for the long-period heterovalent superlattices, the [110] interface has the lowest energy. On the contrary, [201] superlattices are usually the most stable for lattice-mismatched isovalent superlattices.

cond-mat.mtrl-sci↗

arXiv2013

Prediction of (TiO2)x(Cu2O)y Alloys for Photoelectrochemical Water Splitting

The formation of (TiO2)x(Cu2O)y solid-solutions are investigated using a global optimization evolutionary algorithm. First-principles calculations based on density functional theory are then used to gain insight into the electronic properties of these alloys. We find that: (i) Ti and Cu in (TiO2)x(Cu2O)y alloys have similar local environments as in bulk TiO2 and Cu2O except for (TiO2)(Cu2O) which has some trigonal-planar Cu ions. (ii) The predicted optical band gaps are around 2.1 eV (590 nm), thus having much better performance for the absorption of visible light compared with both binary oxides. (iii) (TiO2)2(Cu2O) has the lowest formation energy amongst all studied alloys and the positions of its band edges are found to be suitable for solar-driven water splitting applications.

cond-mat.mtrl-sci↗

arXiv2012

Origin of the Superior Conductivity of Perovskite Ba(Sr)SnO3

ASnO3 (A=Ba, Sr) are unique perovskite oxides in that they have superior electron conductivity despite their wide optical band gaps. Using first-principles band structure calculations, we show that the small electron effective masses, thus, good electron conductivity of ASnO3 can be attributed to the large size of Sn in this system that gives the conduction band edge with antibonding Sn and O s characters. Moreover, we show that ASnO3 can be easily doped by La with shallow LaA(+/0) donor level. Our results, therefore, explained why the perovskite BaSnO3, SrSnO3, and their alloys are promising candidates for transparent conducting oxides.

cond-mat.mtrl-sci↗

arXiv2012

Towards Direct-Gap Silicon Phases by the Inverse Band Structure Design Approach

Diamond silicon (Si) is the leading material in current solar cell market. However, diamond Si is an indirect band gap semiconductor with a large energy difference (2.4 eV) between the direct gap and the indirect gap, which makes it an inefficient absorber of light. In this work, we develop a novel inverse-band structure design approach based on the particle swarming optimization algorithm to predict the metastable Si phases with better optical properties than diamond Si. Using our new method, we predict a cubic Si20 phase with quasi-direct gaps of 1.55 eV, which is a promising candidate for making thin-film solar cells.

cond-mat.mtrl-sci↗

arXiv2012

Strong Dzyaloshinskii-Moriya Interaction and Origin of Ferroelectricity in Cu2OSeO3

By performing density functional calculations, we investigate the origin of the skyrmion state and ferroelectricity in Cu2OSeO3. We find that the Dzyaloshinskii-Moriya interactions between the two different kinds of Cu ions are extremely strong and induce the helical ground state and the skyrmion state in the absence and presence of magnetic field, respectively. On the basis of the general model for the spin-order induced polarization, we propose that the ferroelectric polarization of Cu2OSeO3 in the collinear ferrimagnetic state arises from an unusual mechanism, i.e., the single-spin-site contribution due to the spin-orbit coupling.

cond-mat.str-el↗

arXiv2012

First-principles study on the effective masses of zinc-blend-derived Cu_2Zn-IV-VI_4 (IV = Sn, Ge, Si and VI = S, Se)

The electron and hole effective masses of kesterite (KS) and stannite (ST) structured Cu_2Zn-IV-VI_4 (IV = Sn, Ge, Si and VI = S, Se) semiconductors are systematically studied using first-principles calculations. We find that the electron effective masses are almost isotropic, while strong anisotropy is observed for the hole effective mass. The electron effective masses are typically much smaller than the hole effective masses for all studied compounds. The ordering of the topmost three valence bands and the corresponding hole effective masses of the KS and ST structures are different due to the different sign of the crystal-field splitting. The electron and hole effective masses of Se-based compounds are significantly smaller compared to the corresponding S-based compounds. They also decrease as the atomic number of the group IV elements (Si, Ge, Sn) increases, but the decrease is less notable than that caused by the substitution of S by Se.

cond-mat.mtrl-sci↗

arXiv2012

Si3AlP: A new promising material for solar cell absorber

First-principles calculations are performed to study the structural and optoelectronic properties of the newly synthesized nonisovalent and lattice-matched (Si2)0.6(AlP)0.4 alloy [T. Watkins et al., J. Am. Chem. Soc. 2011, 133, 16212.] We find that the ordered CC-Si3AlP with a basic unit of one P atom surrounded by three Si atoms and one Al atom is the most stable one within the experimentally observed unit cell.1 Si3AlP has a larger fundamental band gap and a smaller direct band gap than Si, thus it has much higher absorption in the visible light region. The calculated properties of Si3AlP suggest that it is a promising candidate for improving the performance of the existing Si-based solar cells. The understanding on the stability and band structure engineering obtained in this study is general and can be applied for future study of other nonisovalent and lattice-matched semiconductor alloys.

cond-mat.mtrl-sci↗

arXiv2012

Ordered Semiconducting Nitrogen-Graphene Alloys

The interaction between substitutional nitrogen atoms in graphene is studied by performing first principles calculations. The nearest neighbor interaction between nitrogen dopants is highly repulsive because of the strong electrostatic repulsion between nitrogen atoms, which prevents the full phase separation in nitrogen doped graphene. Interestingly, there are two relatively stable nitrogen-nitrogen pairs due to the anisotropy charge redistribution induced by nitrogen doping. We reveal two stable semiconducting ordered N doped graphene structures C3N and C12N through the cluster expansion technique and particle swarm optimization method. In particular, C12N has a direct band gap of 0.98 eV. The heterojunctions between C12N and graphene nanoribbons might be promising organic solar cells.

cond-mat.mtrl-sci↗

arXiv2011

Predicting the Spin-Lattice Order of Frustrated Systems from First-Principles

A novel general method of describing the spin-lattice interactions in magnetic solids was proposed in terms of first principles calculations. The spin exchange and Dzyaloshinskii-Moriya interactions as well as their derivatives with respect to atomic displacements can be evaluated efficiently on the basis of density functional calculations for four ordered spin states. By taking into consideration the spin-spin interactions, the phonons, and the coupling between them, we show that the ground state structure of a representative spin-frustrated spinel, MgCr2 O4, is tetragonally distorted, in agreement with experiments. However, our calculations find the lowest energy for the collinear spin ground state, in contrast to previously suggested non-collinear models.

cond-mat.str-el↗