arXiv subjects

Subin Lee

Publications and source records attributed to Subin Lee.

14 recordsLinked to original sources

arXiv2026

Mircomechanical insights into unconstrained grain boundary sliding

Grain boundary sliding (GBS) is a key deformation mechanism at high homologous temperatures in polycrystalline materials, however, its intrinsic behavior is often obscured by additional strain accommodation processes. In this study, dislocation-mediated unconstrained GBS was investigated using Ni bicrystal micropillars containing a single high-angle grain boundary. Micropillar compression tests were conducted over a temperature range from room temperature to $600\,^{\circ}\mathrm{C}$ and strain rates between $5\times10^{-4}$ and $10^{-1}\,\mathrm{s}^{-1}$. By comparing bicrystal and single-crystal responses, the intrinsic contribution of GBS was isolated. The strain-rate sensitivity remained low (SRS $\approx 0.034 \pm 0.017$), comparable to room temperature values, indicating the absence of diffusion-controlled accommodation mechanisms. The activation energy for GBS was determined to be $234\,\mathrm{kJ\,mol^{-1}}$, consistent with grain boundary diffusion-assisted glide of grain boundary dislocations. These results demonstrate that the high strain-rate sensitivity commonly associated with GBS in polycrystals originates primarily from accommodation processes rather than the intrinsic sliding mechanism.

cond-mat.mtrl-sci↗

arXiv2025

High-pressure electronic states in semiconductors studied by infrared spectroscopy: metallization and band gap tuning in Mg$_2$Si, InAs and InSb

In this article, a brief introduction is first given on infrared studies of materials at high pressures using a diamond anvil cell. Then, our recent results of high-pressure infrared studies are described for Mg$_2$Si, InAs, and InSb. For Mg$_2$Si, pressure-induced metallization at pressures near 10 GPa were clearly demonstrated for both carrier-doped and undoped Mg$_2$Si by large increases of reflectivity. For InAs and InSb, their band gap ($E_g$) increased rapidly and almost linearly with pressure with linear coefficients of $dE_g/dP$=84.6 and 112 meV/GPa, respectively. Obtained values of $E_g$ versus lattice parameter at high pressures are compared with those for other IIl-V semiconductors at ambient pressure, giving unique insight into effects of physical and chemical pressures on $E_g$. Above the structural transition pressures of 7 and 3 GPa for InAs and InSb, respectively, they exhibit highly metallic characteristics accompanied by high reflectivity.

cond-mat.mtrl-sci↗

arXiv2024

Columnar grain boundaries are the weakest link in hard coatings: Insights from micro-cantilever testing with bridge notches

The effect of columnar grain boundaries on the fracture toughness was investigated using micro-cantilever fracture testing with a bridge notch, and a unique hard coating consisting of two distinct microstructures: one with columnar grains and another with an epitaxial layer. The bridge-failure sequence qualitatively demonstrated the lower fracture toughness at the columnar-grained structure. Quantitatively, the load drops measured at bridge-failure also revealed a significant decrease in fracture toughness due to grain boundaries. Specifically, the fracture toughness decreased by around 30%, from 4.1 +/- 0.4 MPa m1/2 for epitaxial microstructure to 3.0 +/- 0.3 MPa m1/2 for columnar-grained structure. The fracture toughness of columnar-grained structure is 3.0 +/- 0.2 MPa m1/2 perpendicular to the growth direction higher than 2.7 +/- 0.1 MPa m1/2 along it. These findings suggest that future optimization of hard coatings should focus on grain boundary toughening, and the present toolbox proposes suitable techniques for such microstructure optimization.

physics.app-ph↗

arXiv2024

Redundant Cross-Correlation for Drift Correction in SEM Nanoparticle Imaging

Scanning Electron Microscopy (SEM) is a widely used tool for nanoparticle characterization, but long-term directional drift can compromise image quality. We present a novel algorithm for post-imaging drift correction in SEM nanoparticle imaging. Our approach combines multiple rapidly acquired, noisy images to produce a single high-quality overlay through redundant cross-correlation, preventing drift-induced distortions. The preservation of critical geometrical properties and accurate imaging of surface features were verified using Atomic Force Microscopy. On platinum nanoparticles with diameters of 300 to 1000 nm, significant improvements in the mean-based signal-to-noise ratio (SNR) were achieved, increasing from 4.4 dB in single images to 11.3 dB when overlaying five images. This method offers a valuable tool for enhancing SEM image quality in nanoparticle research and metrology, particularly in settings without specialized hardware-based drift correction.

cond-mat.mtrl-sci↗

arXiv2024

Data-efficient 4D-STEM in SEM: Beyond 2D Materials to Metallic Materials

Four-dimensional scanning transmission electron microscopy (4D-STEM) is a powerful tool that allows for the simultaneous acquisition of spatial and diffraction information, driven by recent advancements in direct electron detector technology. Although 4D-STEM has been predominantly developed for and used in conventional TEM and STEM, efforts are being made to implement the technique in scanning electron microscopy (SEM). In this paper, we push the boundaries of 4D-STEM in SEM and extend its capabilities in three key aspects: (1) faster acquisition rate with reduced data size, (2) higher angular resolution, and (3) application to various materials including conventional alloys and focused ion beam (FIB) lamella. Specifically, operating the MiniPIX Timepix3 detector in the event-driven mode significantly improves the acquisition rate by a factor of a few tenths compared to conventional frame-based mode, thereby opening up possibilities for integrating 4D-STEM into various in situ SEM testing. Furthermore, with a novel stage-detector geometry, a camera length of 160 mm is achieved which improves the angular resolution amplifying its utility, for example, magnetic or electric field imaging. Lastly, we successfully imaged a nanostructured platinum-copper thin film with a grain size of 16 nm and a thickness of 20 nm, and identified annealing twins in FIB-prepared polycrystalline copper using virtual darkfield imaging and orientation mapping. This work demonstrates the potential of synergetic combination of 4D-STEM with in situ experiments, and broadening its applications across a wide range of materials.

cond-mat.mtrl-sci↗

arXiv2023

What if you said that differently?: How Explanation Formats Affect Human Feedback Efficacy and User Perception

Eliciting feedback from end users of NLP models can be beneficial for improving models. However, how should we present model responses to users so they are most amenable to be corrected from user feedback? Further, what properties do users value to understand and trust responses? We answer these questions by analyzing the effect of rationales (or explanations) generated by QA models to support their answers. We specifically consider decomposed QA models that first extract an intermediate rationale based on a context and a question and then use solely this rationale to answer the question. A rationale outlines the approach followed by the model to answer the question. Our work considers various formats of these rationales that vary according to well-defined properties of interest. We sample rationales from language models using few-shot prompting for two datasets, and then perform two user studies. First, we present users with incorrect answers and corresponding rationales in various formats and ask them to provide natural language feedback to revise the rationale. We then measure the effectiveness of this feedback in patching these rationales through in-context learning. The second study evaluates how well different rationale formats enable users to understand and trust model answers, when they are correct. We find that rationale formats significantly affect how easy it is (1) for users to give feedback for rationales, and (2) for models to subsequently execute this feedback. In addition, formats with attributions to the context and in-depth reasoning significantly enhance user-reported understanding and trust of model outputs.

cs.CL↗

arXiv2023

ExpertQA: Expert-Curated Questions and Attributed Answers

As language models are adopted by a more sophisticated and diverse set of users, the importance of guaranteeing that they provide factually correct information supported by verifiable sources is critical across fields of study. This is especially the case for high-stakes fields, such as medicine and law, where the risk of propagating false information is high and can lead to undesirable societal consequences. Previous work studying attribution and factuality has not focused on analyzing these characteristics of language model outputs in domain-specific scenarios. In this work, we conduct human evaluation of responses from a few representative systems along various axes of attribution and factuality, by bringing domain experts in the loop. Specifically, we collect expert-curated questions from 484 participants across 32 fields of study, and then ask the same experts to evaluate generated responses to their own questions. In addition, we ask experts to improve upon responses from language models. The output of our analysis is ExpertQA, a high-quality long-form QA dataset with 2177 questions spanning 32 fields, along with verified answers and attributions for claims in the answers.

cs.CL↗

arXiv2022

ASAP: Accurate semantic segmentation for real time performance

Feature fusion modules from encoder and self-attention module have been adopted in semantic segmentation. However, the computation of these modules is costly and has operational limitations in real-time environments. In addition, segmentation performance is limited in autonomous driving environments with a lot of contextual information perpendicular to the road surface, such as people, buildings, and general objects. In this paper, we propose an efficient feature fusion method, Feature Fusion with Different Norms (FFDN) that utilizes rich global context of multi-level scale and vertical pooling module before self-attention that preserves most contextual information while reducing the complexity of global context encoding in the vertical direction. By doing this, we could handle the properties of representation in global space and reduce additional computational cost. In addition, we analyze low performance in challenging cases including small and vertically featured objects. We achieve the mean Interaction of-union(mIoU) of 73.1 and the Frame Per Second(FPS) of 191, which are comparable results with state-of-the-arts on Cityscapes test datasets.

cs.CV↗

arXiv2022

Chemical Partitioning at Crystalline Defects in PtAu as a Pathway to Stabilize Electrocatalysts

Dissolution of electrocatalysts during long-term and dynamic operation is a challenging problem in energy conversion and storage devices such as fuel cells and electrolyzers. To develop stable electrocatalysts, we adopt the design concept of segregation engineering, which uses solute segregation prone to electrochemical dissolution at internal defects, i.e., grain boundaries and dislocations. We showcase the feasibility of this approach by stabilizing a model Pt catalyst with an addition of more noble Au (approximately 5 atomic percent). We characterized the defects' nanoscale structure and chemistry, and monitored the electrochemical dissolution of Pt and PtAu alloys by online inductively coupled plasma mass spectrometry. Once segregated to defects, Au atoms can stabilize and hence passivate the most vulnerable sites against electrochemical dissolution and improve the stability and longevity of the Pt electrocatalysts by more than an order of magnitude. This opens pathways to use solute segregation to defects for the development of more stable nanoscale electrocatalysts, a concept applicable for a wide range of catalytic systems.

cond-mat.mtrl-sci↗

arXiv2021

Understanding grain boundary electrical resistivity in Cu: the effect of boundary structure

Grain boundaries (GBs) in metals usually increase electrical resistivity due to their distinct atomic arrangement compared to the grain interior. While the GB structure has a crucial influence on the electrical properties, its relationship with resistivity is poorly understood. Here, we perform a systematic study on the resistivity and structure relationship in Cu tilt GBs, employing high resolution in-situ electrical measurements coupled with atomic structure analysis of the GBs. Excess volume and energies of selected GBs are calculated using molecular dynamics simulations. We find a consistent relation between the coincidence site lattice (CSL) type of the GB and its resistivity. The most resistive GBs are high range of low-angle GBs (misorientation 14 to 18 degrees) with twice the resistivity of high angle tilt GBs, due to the high dislocation density and corresponding strain fields. Regarding the atomistic structure, GB resistivity approximately correlates with the GB excess volume. Moreover, we show that GB curvature increases resistivity by about 80%, while phase variations and defects within the same CSL type do not considerably change it.

cond-mat.mtrl-sci↗

arXiv2021

Structure and hardness of in situ synthesized nano-oxide strengthened CoCrFeNi high entropy alloy thin films

In this study, we report on face-centered cubic structured CoCrFeNi high-entropy alloy thin films with finely dispersed nano-oxide particles which are formed by internal oxidation. Analytical scanning transmission electron microscopy imaging found that the particles are Cr2O3. The oxide particles contribute to the hardening of the film increasing its hardness by 14% compared to that of the film without precipitates, through the Orowan-type strengthening mechanism. Our novel approach paves the way to design medium- and high-entropy alloys with high strength by making use of oxide phases.

cond-mat.mtrl-sci↗

arXiv2021

Nanocrystalline equiatomic CoCrFeNi alloy thin films: Are they single phase fcc?

The bulk quaternary equiatomic CoCrFeNi alloy is studied extensively in literature. Under experimental conditions, it shows a single-phase fcc structure and its physical and mechanical properties are similar to those of the quinary equiatomic CoCrFeMnNi alloy. Many studies in literature have focused on the mechanical properties of bulk nanocrystalline high entropy alloys or compositionally complex alloys, and their microstructure evolution upon annealing. The thin film processing route offers an excellent alternative to form nanocrystalline alloys. Due to the high nucleation rate and high density of defects in thin films synthesized by sputtering, the kinetics of microstructure evolution is often accelerated compared to those taking place in the bulk. Here, thin films are used to study the phase evolution in nanocrystalline CoCrFeNi deposited on Si/SiO 2 and c-sapphire substrates by magnetron cosputtering from elemental sources. The phases and microstructure of the films are discussed in comparison to the bulk alloy. The main conclusion is that second phases can form even at room temperature provided there are sufficient nucleation sites.

cond-mat.mtrl-sci↗

arXiv2020

The origin of jerky dislocation motion in high-entropy alloys

Dislocations in single-phase concentrated random alloys, including high- entropy alloys (HEAs), repeatedly encounter pinning during glide, resulting in jerky dislocation motion. While solute-dislocation interaction is well understood in conventional alloys, the origin of individual pinning points in concentrated random alloys is a matter of debate. In this work, we investigate the origin of dislocation pinning in the CoCrFeMnNi HEA. In- situ transmission electron microscopy studies reveal wavy dislocation lines and a jagged glide motion under external loading, even though no segregation or clustering is found around Shockley partial dislocations. Atomistic simulations reproduce the jerky dislocation motion and link the repeated pinning to local fluctuations in the Peierls friction. We demonstrate that the density of high local Peierls friction is proportional to the critical stress required for dislocation glide and the dislocation mobility.

cond-mat.mtrl-sci↗

arXiv2020

Comparative study of hydrogen embrittlement resistance between additively and conventionally manufactured austenitic stainless steels

Hydrogen embrittlement in 304L (18wt.% Cr, 8-10wt.% Ni) austenitic stainless steel (ASS) fabricated by laser powder-bed-fusion (LPBF) was investigated by tensile testing after electrochemical hydrogen pre-charging and compared to conventionally available 304L ASSs with two different processing histories, (i) casting plus annealing (CA) and (ii) CA plus thermomechanical treatment (TMT). It was revealed that hydrogen-charging led to a significant reduction in ductility for the CA sample, but only a small effect of hydrogen was observed for the LPBF and CA-TMT samples. Hydrogen-assisted cracking behavior was found to be strongly linked to strain-induced martensitic transformation. In addition, the amount of alpha' martensite was much higher in the CA sample than in other samples, suggesting that severe hydrogen embrittlement can be correlated with the low mechanical stability of austenite. Detailed microstructural characterization showed that low austenite stability of the CA sample was mainly attributed to the retained content of delta ferrite and the chemical inhomogeneity inside the gamma matrix (gamma close to delta has ~2 wt.% higher Cr but ~2 wt.% lower Ni), but TMT enhanced the chemical homogeneity and thus austenite stability. By contrast, the LPBF process led directly, i.e. without any thermomechanical treatment, to a fully austenitic structure with homogeneous elemental distribution in the ASS. These results confirmed that the presence of delta and the chemical inhomogeneity inside gamma matrix, which promoted the deformation-induced martensitic transformation and the associated H enrichment at the gamma-alpha' interface, was the primary reason for the severe H-assisted failure.

cond-mat.mtrl-sci↗