arXiv subjects

Sucheol Kim

Publications and source records attributed to Sucheol Kim.

12 recordsLinked to original sources

arXiv2026

System-Level Evaluation of LEO Satellite Communications Under Service-Driven Traffic Dynamics

As low Earth orbit (LEO) satellite communications take shape on a global scale, system-level evaluation has become essential for a rigorous understanding of their performance characteristics. Most existing studies have relied on a full-buffer assumption, which obscures the heterogeneity and intermittency that characterize actual user equipment (UE) traffic. This article evaluates the performance of LEO satellite communications under realistic service conditions through the incorporation of non-full-buffer traffic models. To this end, we develop a system-level simulator that complies with the channel modeling and evaluation methodologies specified in 3rd Generation Partnership Project (3GPP) technical reports 38.811 and 38.821. Three key system-level performance metrics are considered: UE throughput, resource block (RB) allocation ratio, and packet delay, which are evaluated across 3GPP LEO satellite study cases under diverse traffic models. The throughput results characterize the distribution of achievable data rates, which delineates the practical operating boundaries of the system. The RB allocation analysis reveals patterns of resource consumption as UE density varies, which provides a quantitative basis for assessing system capability. Furthermore, the delay analysis characterizes latency behavior, which is of particular importance in satellite environments where substantial propagation delays are inherent and must be examined to ensure service feasibility. These evaluations provide a realistic performance outlook for non-full-buffer LEO satellite communications and provide insight into the user experience under practical operating conditions.

eess.SP↗

arXiv2024

UV-Plane Beam Mapping for Non-Terrestrial Networks in 3GPP System-Level Simulations

Due to the high altitudes and large beam sizes of satellites, the curvature of the Earth's surface can impact system-level performance. To consider this, 3GPP introduces the UV-plane beam mapping for system-level simulations of non-terrestrial networks (NTNs). This paper aims to provide a comprehensive understanding of how beams and user equipments (UEs) are placed on the UV-plane and subsequently mapped to the Earth's surface. We present a general process of projecting UEs on the UV-plane onto the Earth's surface. This process could offer a useful guideline for beam and UE deployment when evaluating the system-level performance of NTNs.

cs.IT↗

arXiv2024

Analyzing Downlink Coverage in Clustered Low Earth Orbit Satellite Constellations: A Stochastic Geometry Approach

Satellite networks are emerging as vital solutions for global connectivity beyond 5G. As companies such as SpaceX, OneWeb, and Amazon are poised to launch a large number of satellites in low Earth orbit, the heightened inter-satellite interference caused by mega-constellations has become a significant concern. To address this challenge, recent works have introduced the concept of satellite cluster networks where multiple satellites in a cluster collaborate to enhance the network performance. In order to investigate the performance of these networks, we propose mathematical analyses by modeling the locations of satellites and users using Poisson point processes, building on the success of stochastic geometry-based analyses for satellite networks. In particular, we suggest the lower and upper bounds of the coverage probability as functions of the system parameters, including satellite density, satellite altitude, satellite cluster area, path loss exponent, and Nakagami parameter $m$. We validate the analytical expressions by comparing them with simulation results. Our analyses can be used to design reliable satellite cluster networks by effectively estimating the impact of system parameters on the coverage performance.

eess.SP↗

arXiv2022

Polar-Cap Codebook Design for MISO Rician Fading Channels with Limited Feedback

Most of the prior works on designing codebooks for limited feedback systems have not considered the presence of strong line-of-sight (LOS) channel component. This paper proposes the design of polar-cap codebook (PCC) for multipleinput single-output (MISO) limited feedback systems subject to Rician fading channels. The codewords of the designed PCC are adaptively constructed according to the instantaneous strength of the LOS channel component. Simulation results show that the codebook can significantly enhance the performance of transmit beamforming in terms of received signal-to-noise ratio (SNR).

cs.IT↗

arXiv2021

Practical Channel Estimation and Phase Shift Design for Intelligent Reflecting Surface Empowered MIMO Systems

In this paper, channel estimation techniques and phase shift design for intelligent reflecting surface (IRS)-empowered single-user multiple-input multiple-output (SU-MIMO) systems are proposed. Among four channel estimation techniques developed in the paper, the two novel ones, single-path approximated channel (SPAC) and selective emphasis on rank-one matrices (SEROM), have low training overhead to enable practical IRS-empowered SU-MIMO systems. SPAC is mainly based on parameter estimation by approximating IRS-related channels as dominant single-path channels. SEROM exploits IRS phase shifts as well as training signals for channel estimation and easily adjusts its training overhead. A closed-form solution for IRS phase shift design is also developed to maximize spectral efficiency where the solution only requires basic linear operations. Numerical results show that SPAC and SEROM combined with the proposed IRS phase shift design achieve high spectral efficiency even with low training overhead compared to existing methods.

cs.IT↗

arXiv2021

Complete Power Reallocation for MU-MIMO under Per-Antenna Power Constraint

This paper proposes a beamforming method under a per-antenna power constraint (PAPC). Although many beamformer designs with the PAPC need to solve complex optimization problems, the proposed complete power reallocation (CPR) method can generate beamformers with excellent performance only with linear operations. CPR is designed to have a simple structure, making it highly flexible and practical. In this paper, three CPR variations considering algorithm convergence speed, sum-rate maximization, and robustness to channel uncertainty are developed. Simulation results verify that CPR and its variations satisfy their design criteria, and, hence, CPR can be readily utilized for various purposes.

cs.IT↗

arXiv2021

Downlink Channel Reconstruction for Spatial Multiplexing in Massive MIMO Systems

To get channel state information (CSI) at a base station (BS), most of researches on massive multiple-input multiple-output (MIMO) systems consider time division duplexing (TDD) to get benefit from the uplink and downlink channel reciprocity. Even in TDD, however, the BS still needs to transmit downlink training signals, which are referred to as channel state information reference signals (CSI-RSs) in the 3GPP standard, to support spatial multiplexing in practice. This is because there are many cases that the number of transmit antennas is less than the number of receive antennas at a user equipment (UE) due to power consumption and circuit complexity issues. Because of this mismatch, uplink sounding reference signals (SRSs) from the UE are not enough for the BS to obtain full downlink MIMO CSI. Therefore, after receiving the downlink CSI-RSs, the UE needs to feed back quantized CSI to the BS using a pre-defined codebook to support spatial multiplexing. In this paper, possible approaches to reconstruct full downlink MIMO CSI at the BS are proposed by exploiting both the SRS and quantized downlink CSI considering practical antenna structures with reduced downlink CSI-RS overhead. Numerical results show that the spectral efficiencies by spatial multiplexing based on the proposed downlink MIMO CSI reconstruction techniques outperform the conventional methods solely based on the quantized CSI.

cs.IT↗

arXiv2021

Multi-Vehicle Velocity Estimation Using IEEE 802.11ad Waveform

Wireless communication systems are to use millimeter-wave (mmWave) spectra, which can enable extra radar functionalities. In this paper, we propose a multi-target velocity estimation technique using IEEE 802.11ad waveform in a vehicle-to-vehicle (V2V) scenario. We form a wide beam to consider multiple target vehicles. The Doppler shift of each vehicle is estimated from least square estimation (LSE) using the round-trip delay obtained from the auto-correlation property of Golay complementary sequences in IEEE 802.11ad waveform, and the phase wrapping is compensated by the Doppler shift estimates of proper two frames. Finally, the velocities of target vehicles are obtained from the estimated Doppler shifts. Simulation results show the proposed velocity estimation technique can achieve significantly high accuracy even for short coherent processing interval (CPI).

cs.IT↗

arXiv2020

Massive MIMO Channel Prediction: Kalman Filtering vs. Machine Learning

This paper focuses on channel prediction techniques for massive multiple-input multiple-output (MIMO) systems. Previous channel predictors are based on theoretical channel models, which would be deviated from realistic channels. In this paper, we develop and compare a vector Kalman filter (VKF)-based channel predictor and a machine learning (ML)-based channel predictor using the realistic channels from the spatial channel model (SCM), which has been adopted in the 3GPP standard for years. First, we propose a low-complexity mobility estimator based on the spatial average using a large number of antennas in massive MIMO. The mobility estimate can be used to determine the complexity order of developed predictors. The VKF-based channel predictor developed in this paper exploits the autoregressive (AR) parameters estimated from the SCM channels based on the Yule-Walker equations. Then, the ML-based channel predictor using the linear minimum mean square error (LMMSE)-based noise pre-processed data is developed. Numerical results reveal that both channel predictors have substantial gain over the outdated channel in terms of the channel prediction accuracy and data rate. The ML-based predictor has larger overall computational complexity than the VKF-based predictor, but once trained, the operational complexity of ML-based predictor becomes smaller than that of VKF-based predictor.

cs.IT↗

arXiv2020

Beam Designs for Millimeter-Wave Backhaul with Dual-Polarized Uniform Planar Arrays

This paper proposes hybrid beamforming designs for millimeter-wave (mmWave) multiple-input multiple-output (MIMO) backhaul systems equipped with uniform planar arrays (UPAs) of dual-polarization antennas at both the transmit and receive base stations. The proposed beamforming designs are to near-optimally solve optimization problems taking the dual-polarization UPA structure into account. Based on the solutions of optimization problems, this paper shows it is possible to generate the optimal dual-polarization beamformer from the optimal single-polarization beamformer sharing the same optimality. As specific examples, squared error and magnitude of inner product are considered respectively for optimization criteria. To optimize proposed beamformers, partial channel information is needed, and the use of low overhead pilot sequences is also proposed to figure out the required information. Simulation results verify that the resulting beamformers have the most uniform gain (with the squared error criterion) or the highest average gain (with the magnitude of inner product criterion) in the covering region with the UPA of dual-polarization antennas.

cs.IT↗

arXiv2020

Beam Design for Millimeter-Wave Backhaul with Dual-Polarized Uniform Planar Arrays

This paper proposes a beamforming design for millimeter-wave (mmWave) backhaul systems with dual-polarization antennas in uniform planar arrays (UPAs). The proposed design method optimizes a beamformer to mimic an ideal beam pattern, which has flat gain across its coverage, under the dominance of the line-of-sight (LOS) component in mmWave systems. The dual-polarization antenna structure is considered as constraints of the optimization. Simulation results verify that the resulting beamformer has uniform beam pattern and high minimum gain in the covering region.

eess.SP↗

arXiv2019

Efficient Channel AoD/AoA Estimation Using Widebeams for Millimeter Wave MIMO Systems

Using millimeter-wave (mmWave) bands is expected to provide high data rates through large licensed and unlicensed spectrum. Due to large path loss and sparse scattering propagation properties, proper beam alignment is important in mmWave systems. Small carrier wavelengths at mmWave bands let wireless communication systems use large antenna arrays to provide sufficient beamforming gain with highly directional beams. Hence, high resolution channel angle-of-departure (AoD) and angle-of-arrival (AoA) estimation is crucial for beam alignment to get the advantages of large beamforming gain. Using large antenna arrays, however, can lead to high system complexity and channel estimation overhead. This paper proposes a channel AoD/AoA estimation technique using widebeams to lower estimation overhead and auxiliary-beam-pair (ABP) to get high resolution channel AoD/AoA estimates considering hybrid transceiver structures. To fully use the hybrid transceiver structures, the linear combination of discrete Fourier transform (DFT) vectors is considered to construct widebeams. Numerical results show that the proposed estimator can get high resolution channel AoD/AoA estimates with lower overhead compared to previous estimators.

eess.SP↗