arXiv subjects

Sudip Acharya

Publications and source records attributed to Sudip Acharya.

8 recordsLinked to original sources

arXiv2026

Study of GeSn Selective Area Growth with Demonstration of SWIR Light Detection

As germanium-tin (GeSn) epitaxial growth quality continuously improves, the search for an efficient integration strategy of GeSn optoelectronics devices into complementary metal-oxide-semiconductor (CMOS) manufacturing line also accelerates. Selective area growth (SAG) on patterned substrate emerges as a promising approach for this quest, with locally controlled growth of GeSn laser/detector suitable for either co-integration with silicon-based waveguide structure or stand-alone module like focal plane array. In this work, we report successful GeSn SAG with Sn content ranging from 3.2% to 8.7% of good optical quality, with demonstration of tunable GeSn SAG photoluminescence and GeSn SAG photoconductor device, the latter with detection cutoff wavelength up to 2 um. In addition, we present a comprehensive study of GeSn SAG condition at different window sizes, from 2 um to 100 um, and shapes: circle, square, octagon, and rectangle. Presence of loading effect is revealed, where GeSn growth rate increases as pattern fill factor and window size shrink. It introduces a different growth condition compared to thin film growth, which can weaken or inhibit Sn incorporation at very small window size and induce Sn segregation in high Sn content SAG growth.

physics.app-ph↗

arXiv2026

Systematic study of high performance GeSn photodiodes with thick absorber for SWIR and extended SWIR detection

Germanium-tin (GeSn) photodiodes potentiate a viable solution to integrate SWIR and extended SWIR detection technology into CMOS processing line. However, challenges in the growth of thick, high quality GeSn limit the device absorber thickness, making it impossible to ascertain the performance limit of GeSn photodiodes. An in-depth understanding of their device physics and a clear optimization pathway towards commercial-grade devices remain elusive. This work presents a systematic empirical study of GeSn photodiodes with thick absorber (2 to 8% Sn content, up to 2630 nm thick), showing high responsivity up to 0.59 A.W-1 at 1.55 μm and 0.43 A.W-1 at 2 μm wavelengths, low dark current density down to 2 x 10-2 A.cm-2, and high detection cutoff wavelengths up to 2.1 and 2.5 μm at 5% and 8% Sn, respectively. Using specific doping design (P-i-N and N-i-P), an in-depth analysis is presented on the impact of junction position, p-type background carrier concentration, bulk/ surface defects and photocarrier diffusion length - on photodetection performance. Different optimization strategies for GeSn photodiodes, in particular at high Sn content, are proposed.

physics.ins-det↗

arXiv2025

Study of electronic band alignment in SiGeSn/GeSn quantum well via internal photoemission effect

SiGeSn-based optoelectronic devices, which operate across a broad infrared wavelength range, have attracted significant attention, particularly heterostructures utilizing quantum wells are widely utilized. In these structures, band alignment type and barrier height are crucial for carrier confinement, making them highly desirable information to obtain. This work leverages the internal photoemission effect to extract effective barrier heights from a Si0.024Ge0.892Sn0.084 / Ge0.882Sn0.118 single quantum well structure, which was pseudomorphically grown on Ge0.9Sn0.1 and Ge buffered Si substrate. The extracted effective barrier heights are approximately 22{plus minus}2 and 50{plus minus}2 meV for electrons and holes, respectively. Moreover, we have identified the type-I band alignment between GeSn well and SiGeSn barrier, as indicated by an internal photoemission threshold of 555 {plus minus} 1 meV.

physics.app-ph↗

arXiv2025

Direct Bandgap Photoluminescence of GeSn grown on Si(100) substrate by Molecular Beam Epitaxy Growth

Group IV alloys of GeSn have gained significant attention for electronic and optoelectronic applications on a Si platform due to their compatibility with existing CMOS technology, tunable band structure, and potential for a direct bandgap at high Sn concentrations. However, synthesizing Sn-rich GeSn structures remains challenging due to the low solid solubility of Sn in Ge (less than 1%) and the substantial lattice mismatch ( about 14%) between Sn and Ge. In this work, we demonstrate the successful growth of high-quality, relaxed GeSn layers with Sn contents of 9.2% and 11.4% on Si(100) substrates via molecular beam epitaxy (MBE). As far as we know, this is the first report of direct bandgap photoluminescence observed from MBE-grown GeSn films without post-growth annealing. Structural characterizations including X-ray diffraction (XRD), secondary ion mass spectrometry (SIMS), and transmission electron microscopy (TEM) confirm uniform Sn incorporation with minimal defect formation. Atomic force microscopy (AFM) reveals smooth surfaces with low roughness. Temperature-dependent photoluminescence (PL) measurements further confirm direct bandgap emission, representing a new stage in the development of MBE-grown GeSn.

physics.app-ph↗

arXiv2024

Grafted AlGaAs/GeSn Optical Pumping Laser Operating up to 130 K

Group IV GeSn double-heterostructure (DHS) lasers offer unique advantages of a direct bandgap and CMOS compatibility. However, further improvements in laser performance have been bottlenecked by limited junction properties of GeSn through conventional epitaxy and wafer bonding. This work leverages semiconductor grafting to synthesize and characterize optically pumped ridge edge-emitting lasers (EELs) with an AlGaAs nanomembrane (NM) transfer-printed onto an epitaxially grown GeSn substrate, interfaced by an ultrathin Al2O3 layer. The grafted AlGaAs/GeSn DHS lasers show a lasing threshold of 11.06 mW at 77 K and a maximum lasing temperature of 130 K. These results highlight the potential of the grafting technique for enhancing charge carrier and optical field confinements, paving the way for room-temperature electrically injected GeSn lasers.

physics.optics↗

arXiv2024

Characterization of AlGaAs/GeSn heterojunction band alignment via X-ray photoelectron spectroscopy

GeSn-based SWIR lasers featuring imaging, sensing, and communications has gained dynamic development recently. However, the existing SiGeSn/GeSn double heterostructure lacks adequate electron confinement and is insufficient for room temperature lasing. The recently demonstrated semiconductor grafting technique provides a viable approach towards AlGaAs/GeSn p-i-n heterojunctions with better electron confinement and high-quality interfaces, promising for room temperature electrically pumped GeSn laser devices. Therefore, understanding and quantitatively characterizing the band alignment in this grafted heterojunction is crucial. In this study, we explore the band alignment in the grafted monocrystalline Al0.3Ga0.7As /Ge0.853Sn0.147 p-i-n heterojunction. We determined the bandgap values of AlGaAs and GeSn to be 1.81 eV and 0.434 eV by photoluminescence measurements, respectively. We further conducted X-ray photoelectron spectroscopy measurements and extracted a valence band offset of 0.19 eV and a conduction band offset of 1.186 eV. A Type-I band alignment was confirmed which effectively confining electrons at the AlGaAs/GeSn interface. This study improves our understanding of the interfacial band structure in grafted AlGaAs/GeSn heterostructure, providing experimental evidence of the Type-I band alignment between AlGaAs and GeSn, and paving the way for their application in laser technologies.

physics.app-ph↗

arXiv2024

AlGaAs/GeSn p-i-n diode interfaced with ultrathin Al$_2$O$_3$

This study presents the fabrication and characterizations of an Al$_{0.3}$Ga$_{0.7}$As/Ge$_{0.87}$Sn$_{0.13}$/GeSn p-i-n double heterostructure (DHS) diode following the grafting approach for enhanced optoelectronic applications. By integrating ultra-thin Al$_2$O$_3$ as a quantum tunneling layer and enhancing interfacial double-side passivation, we achieved a heterostructure with a substantial 1.186 eV conduction band barrier between AlGaAs and GeSn, along with a low interfacial density of states. The diode demonstrated impressive electrical characteristics with high uniformity, including a mean ideality factor of 1.47 and a mean rectification ratio of 2.95E103 at +/-2 V across 326 devices, indicating high-quality device fabrication. Comprehensive electrical characterizations, including C-V and I-V profiling, affirm the diode's capability to provide robust electrical confinement and efficient carrier injection. These properties make the Al$_{0.3}$Ga$_{0.7}$As/Ge$_{0.87}$Sn$_{0.13}$/GeSn DHS a promising candidate for next-generation electrically pumped GeSn lasers, potentially operable at higher temperatures. Our results provide a viable pathway for further advancements in various GeSn-based devices.

physics.app-ph↗

arXiv2024

Electrically Injected mid-infrared GeSn laser on Si operating at 140 K

Owing to its true direct bandgap and tunable bandgap energies,GeSn alloys are increasingly attractive as gain media for mid-IR lasers that can be monolithically integrated on Si. Demonstrations of optically pumped GeSn laser at room under pulsed condition and at cryogenic temperature under continuous-wave excitation show great promise of GeSn lasers to be efficient electrically injected light sources on Si. Here we report electrically injected GeSn lasers using Fabry-Perot cavity with 20, 40, and 80 micron ridge widths. A maximum operating temperature of 140 K with lasing threshold of 0.756 kA/cm2 at 77 K and emitting wavelength of 2722 nm at 140 K was obtained. The lower threshold current density compared to previous works was achieved by reducing optical loss and improving the optical confinement. The peak power was measured as 2.2 mW/facet at 77 K.

physics.optics↗