arXiv subjects

Sung-Il Baik

Publications and source records attributed to Sung-Il Baik.

6 recordsLinked to original sources

arXiv2022

The effects of diffusional couplings on compositional trajectories and interfacial free energies during phase separation in a quaternary Ni-Al-Cr-Re model superalloy

The temporal evolution of ordered gamma-prime(L12)-precipitates and the compositional trajectories during phase-separation of the gamma(face-centered-cubic(f.c.c.)) and gamma-prime(L12)-phases are studied in a Ni-0.10Al-0.085Cr-0.02Re(mole-fraction) superalloy, utilizing atom-probe tomography, transmission electron microscopy, and the Philippe-Voorhees (PV) coarsening model. As the gamma-prime(L12)-precipitates grow, the excesses of Ni, Cr and Re, and depletion of Al in the gamma(f.c.c.)-matrix develop as a result of diffusional fluxes crossing gamma(f.c.c.)/gamma-prime(L12) heterophase interfaces. The coupling effects on diffusional fluxes was introduced (PV coarsening model) in terms of the diffusion tensor, D, and the second-derivative tensor of the molar Gibbs free energies, G", obtained employing Thermo-Calc and DICTRA calculations. The Gibbs interfacial free energies are (6.9 +- 1.4) mJ/m2 with all terms in D and G", which changes to (18.9 +- 2.1) mJ/m2, (37.7 +- 3.3) mJ/m2, and (-7.5 +- 1.2) mJ/m2 without including the off-diagonal terms in D, G", and both D and G", respectively. The experimental APT compositional trajectories are displayed and compared with the PV model in a partial quaternary phase-diagram, employing a tetrahedron. The compositional trajectories measured by APT exhibit curvilinear behavior in the nucleation and growth regimes, which become vectors, moving simultaneously toward the gamma(f.c.c.) and gamma-prime(L12) conjugate solvus-surfaces, for the quasi-stationary coarsening regime. The compositional trajectories are compared to the PV model with and without the off-diagonal terms in D and G". The directions including the off-diagonal terms in D and G" tensors are consistent with the APT experimental data.

cond-mat.mtrl-sci↗

arXiv2020

Temperature increases and thermoplastic microstructural evolution in adiabatic shear bands in a high-strength and high-toughness 10 wt.% Ni steel

A 10 wt.% nickel-steel has been developed for high pressures and low-temperature applications, due to its high strength, excellent toughness, and low ductile-to-brittle transition temperature (DBTT). Under dynamic loading conditions this steel is, however, prone to shear localization that manifests as adiabatic shear bands (ASBs). The temperature increases and thermoplastic microstructural evolution in the ASB are studied in detail, from the macroscopic length scale to the atomic-scale employing correlative electron-backscatter diffraction (EBSD), transmission electron microscopy (TEM), and atom-probe tomography (APT). From a calculation of the temperature increase under adiabatic conditions, based on the conversion of plastic-work to heat generation, the microstructural transitions in the ASB are discussed specifically for: (i) a b.c.c.-f.c.c. phase-transformation and their elemental partitioning; (ii) the thermodynamic model for the compositional change of the V(Nb)-rich carbonitride precipitates during a temperature increase; and (iii) grain-refinement and rotation by dynamic/mechanical recrystallization processes. Solute segregation at subgrain boundaries, measured using the Gibbsian interfacial excess methodology, reveals how solute segregation contributes to the instability of localized shear-deformation by promoting the depinning of solute elements and the migration of a grain boundary. Finally, a kinetic model for grain refinement/rotation within an ASB is described by the dynamic recrystallization behavior with: (i) subgrain formation; (ii) rotation/refinement by deformation; and (iii) grain growth by subgrain coalescence with further rotation and a temperature increase. The temperature increase under dynamic deformation in an ASB promotes grain boundary migration and subgrain coalescence to create a large degree of equiaxed grains with a low density of imperfections.

cond-mat.mtrl-sci↗

arXiv2020

An integral method for the calculation of the reduction in interfacial free energy due to interfacial segregation

A method based on the Gibbs' adsorption isotherm is developed to calculate the decrease in interfacial free energy resulting from solute segregation at an internal interface, built on measured concentration profiles. Utilizing atom-probe tomography (APT), we first measure a concentration profile of the relative interfacial excess of solute atoms across an interface. To accomplish this we utilize a new method based on J. W. Cahn's formalism for the calculation of the Gibbs interfacial excess. We also introduce a method to calculate the decrease in interfacial free energy that is caused by the segregating solute atoms. This method yields a discrete profile of the decrease in interfacial free energies, which takes into account the measured concentration profile and calculated Gibbsian excess profile. We demonstrate that this method can be used for both homo- and hetero-phase interfaces and takes into account the actual distribution of solute atoms across an interface as determined by APT. It is applied to the case of the semiconducting system PbTe-PbS 12 mol.%-Na 1 mol.%, where Na segregation at the PbS/PbTe interface is anticipated to reduce the interfacial free energy of the {100} facets. We also consider the case of the nickel-based Alloy 600, where B and Si segregation are suspected to impede inter-granular stress corrosion cracking (IGSCC) at homo- (GB) and hetero-phase metal carbide (M7C3) interfaces. The concentration profiles associated with internal interfaces are measured by APT using an ultraviolet (wavelength = 355 nm) laser to dissect nanotips on an atom-by-atom and atomic plane-by-plane basis.

cond-mat.mtrl-sci↗

arXiv2020

Grain-boundary structure and segregation in Nb3Sn coatings on Nb for high-performance superconducting radiofrequency cavity applications

We report on atomic-scale analyses of grain boundary (GB) structures and segregation in Nb3Sn coatings on Nb, prepared by the vapor-diffusion process, for superconducting radiofrequency (SRF) cavity applications, utilizing atom-probe tomography, high-resolution scanning transmission electron-microscopy and first-principles calculations. We demonstrate that the chemical composition of Nb3Sn GBs is correlated strongly with the diffusion of Sn and Nb at GBs during the coating process. In a sample coated with a relatively large Sn flux, we observe an interfacial width of Sn segregation at a GB of ~3 nm, with a maximum concentration of ~35 at.%. After post-annealing at 1100 oC for 3 h, the Sn segregated at GBs disappears and Nb segregation is observed subsequently at GBs, indicating that Nb diffused into the Nb3Sn GBs from the Nb substrate. It is also demonstrated that the amount of Sn segregation in a Nb3Sn coating can be controlled by: (i) Sn flux; and (ii) the temperatures of the Nb substrates and Sn source, which may affect the overall kinetics including GB diffusion of Sn and Nb. An investigation of the correlation between the chemical compositions of GBs and Nb3Sn SRF cavity performance reveals that the Nb3Sn SRF cavities with the best performance (high-quality factors at high accelerating electric-field gradients) do not exhibit Sn segregation at GBs. Our results suggest that the chemical compositions of GBs in Nb3Sn coatings for SRF cavities can be controlled by GB engineering and can be utilized to optimize fabrication of high-quality Nb3Sn coatings for SRF cavities.

cond-mat.mtrl-sci↗

arXiv2019

An Atom-Probe Tomographic Study of the Compositional Trajectories During gamma(f.c.c.)/gamma-prime(L12) Phase-Separation in a Ni-Al-Cr-Re Superalloy

The compositional diffusional-trajectories for a phase separation of gamma(f.c.c.)/gamma-prime(L12) phases are studied in a quaternary Ni-10Al-8.5Cr-2Re alloy, aged at 700 deg.C for 0 to 1024 h, utilizing atom-probe tomography (APT). As the gamma-prime(L12)-precipitates grow, the enrichments of Ni, Cr, and Re and depletion of Al on the gamma(f.c.c.) matrix-side develop as a result of diffusional fluxes crossing the gamma(f.c.c.)/gamma-prime(L12) interface.The experimental (APT) compositional trajectories of the two-phases, gamma(f.c.c.)/gamma-prime(L12), are displayed in a quaternary phase-diagram, employing a tetrahedron, and compared with the Philippe-Voorhees (P-V) coarsening model which includes the off-diagonal terms in the diffusion tensor for the multi-component system.

cond-mat.mtrl-sci↗

arXiv2018

A Correlative Four-Dimensional Study of Phase Separation at the Subnanoscale to Nanoscale of a Ni-Al Alloy

The temporal evolution of ordered gamma prime (L12)-precipitates precipitating in a disordered gamma(f.c.c.) matrix is studied in extensive detail for a Ni-12.5 Al at.% alloy aged at 823 K (550 oC), for times ranging from 0.08 to 4096 h. Three-dimensional atom-probe tomography (3-D APT) results are compared to monovacancy-mediated lattice-kinetic Monte Carlo (LKMC1) simulations, which include monovacancy-solute binding energies through 4th nearest-neighbor distances, for the same mean composition and aging temperature. The temporal evolution of the measured values of the mean radius, , number density, aluminum supersaturations, and volume fraction of the gamma prime(L12)-precipitates are compared to the predictions of a modified version of the Lifshitz-Slyozov-Wagner coarsening model due to Calderon, Voorhees et al. The resulting experimental rate constants are used to calculate the Gibbs interfacial free-energy between the gamma(f.c.c.)- and gamma prime(L12)-phases using data from two thermodynamic databases, and its value is compared to all extant values dating from 1966. The diffusion coefficient for coarsening is calculated utilizing the same rate constants and compared to all extant archival diffusivities, not determined from coarsening experiments, and is demonstrated to be the inter-diffusivity, , of Ni and Al. The monovacancy-mediated LKMC1 simulation results are in good agreement with our 3-D APT data. It is demonstrated that the compositional interfacial width, for the {100} interface, between the gamma(f.c.c.)- and gamma prime (L12)-phases, decreases continuously with increasing aging time and , for the 3-D APT results and monovacancy-mediated LKMC1 simulations, in disagreement with an ansatz intrinsic to the trans-interface diffusion-controlled coarsening model, which predicts the opposite trend for binary alloys.

cond-mat.mtrl-sci↗