arXiv subjects

Sungyon Lee

Publications and source records attributed to Sungyon Lee.

9 recordsLinked to original sources

arXiv2025

Drops on architected elastic substrates: A repertoire of regimes at the turn of a knob

Drops on a vibrating substrate can experience a variety of motion regimes, including directional motion and climbing. The key ingredient to elicit these regimes is simultaneously activating the in-plane and out-of-plane degrees of freedom of the substrate with the proper phase difference. This is typically achieved by using a rigid substrate and two independent actuators. However, this framework is unable to establish different motion conditions in different regions of the substrate, achieving spatial variability and selectivity, since this would violate the rigid-body assumption and require a proliferation of actuation channels. Challenging this paradigm, we leverage the inherent elasticity of the substrate to provide the modal and spatial diversity required to establish the desired regimes. To this end, we design deformable substrates exhibiting a rich landscape of deformation modes, and we exploit their multi-modal response to switch between drop motion regimes and select desired spatial patterns, using the excitation frequency as our tuning parameter.

physics.flu-dyn↗

arXiv2025

Microscopic contact line dynamics dictate the emergent behaviors of particle rafts

Fluid-fluid interfaces laden with discrete particles behave curiously like continuous elastic sheets, leading to their applications in emulsion and foam stabilization. Although existing continuum models can qualitatively capture the elastic buckling of these particle-laden interfaces -- often referred to as particle rafts -- under compression, they fail to link their macroscopic collective properties to the microscopic behaviors of individual particles. Thus, phenomena such as particle expulsion from the compressed rafts remain unexplained. Here, by combining systematic experiments with first-principle modeling, we reveal how the macroscopic mechanical properties of particle rafts emerge from particle-scale interactions. We construct a phase diagram that delineates the conditions under which a particle raft collapses via collective folding versus single-particle expulsion. Guided by this theoretical framework, we demonstrate control over the raft's failure mode by tuning the physicochemical properties of individual particles. Our study highlights the previously overlooked dual nature of particle rafts and exemplifies how collective dynamics can arise from discrete components with simple interactions.

cond-mat.soft↗

arXiv2024

Programming droplet motion using metamaterials

Motion control of droplets has generated much attention for its applications to microfluidics, where precise control of small fluid volumes is an imperative requirement. Mechanical vibrations have been shown to be effective at inducing controllable depinning, and activation of different drop motion regimes. However, existing vibration-based strategies involve establishing homogeneous rigid-body dynamics on the substrate, and therefore lack any form of spatial heterogeneity and tuning. Addressing this limitation, metamaterials provide an ideal platform to achieve spectrally and spatially selective drop motion control, which leverages their ability to attenuate vibrations in selected frequency bands and in selected regions of a substrate. In this work, we illustrate the potential of metamaterials-based drop control by experimentally demonstrating a variety of drop motion capabilities on the surface of metaplates endowed with locally resonant stubs. The experiments leverage the design versatility of a LEGO component-enabled reconfigurable design platform and laser vibrometry measurements with high spatial resolution.

physics.flu-dyn↗

arXiv2023

Optimal free-surface pumping by an undulating carpet

Examples of fluid flows driven by undulating boundaries are found in nature across many different length scales. Even though different driving mechanisms have evolved in distinct environments, they perform essentially the same function: directional transport of liquid. Nature-inspired strategies have been adopted in engineered devices to manipulate and direct flow. Here, we demonstrate how an undulating boundary generates large-scale pumping of a thin liquid near the liquid-air interface. Two dimensional traveling waves on the undulator, a canonical strategy to transport fluid at low Reynolds numbers, surprisingly lead to flow rates that depend non-monotonically on the wave speed. Through an asymptotic analysis of the thin-film equations that account for gravity and surface tension, we predict the observed optimal speed that maximizes pumping. Our findings reveal a novel mode of pumping with less energy dissipation near a free surface compared to a rigid boundary.

physics.flu-dyn↗

arXiv2021

Corona splashing triggered by a loose monolayer of particles

In nature, high-speed raindrops often impact and spread on particulate surfaces (e.g., soil, plant leaves with spores or pollen). We study the dynamics of droplet impact on a loosely packed monolayer of particles by combining experimental and mathematical approaches. We find that the presence of mobile particles lowers the critical impact velocity at which the droplet exhibits corona splashing, as the particle area fraction is systematically increased. We rationalize this experimental observation by considering the jamming of frictional particles at the spreading rim. Elucidating the splashing transition of the drop on a particulate bed can lead to a better understanding of soil loss and erosion from falling raindrops.

physics.flu-dyn↗

arXiv2020

Migration, trapping, and venting of gas in a soft granular material

Gas migration through a soft granular material involves a strong coupling between the motion of the gas and the deformation of the material. This process is relevant to a variety of natural phenomena, such as gas venting from sediments and gas exsolution from magma. Here, we study this process experimentally by injecting air into a quasi-2D packing of soft particles and measuring the morphology of the air as it invades and then rises due to buoyancy. We systematically increase the confining pre-stress in the packing by compressing it with a fluid-permeable piston, leading to a gradual transition in migration regime from fluidization to pathway opening to pore invasion. We find that mixed migration regimes emerge at intermediate confinement due to the spontaneous formation of a compaction layer at the top of the flow cell. By connecting these migration mechanisms with macroscopic invasion, trapping, and venting, we show that mixed regimes enable a sharp increase in the average amount of gas trapped within the packing, as well as much larger venting events. Our results suggest that the relationship between invasion, trapping, and venting could be controlled by modulating the confining stress.

cond-mat.soft↗

arXiv2014

Inertial migration of a rigid sphere in three-dimensional Poiseuille flow

Inertial lift forces are exploited within inertial microfluidic devices to position, segregate, and sort particles or droplets. However the forces and their focusing positions can currently only be predicted by numerical simulations, making rational device design very difficult. Here we develop theory for the forces on particles in microchannel geometries. We use numerical experiments to dissect the dominant balances within the Navier-Stokes equations and derive an asymptotic model to predict the lateral force on the particle as a function of particle size. Our asymptotic model is valid for a wide array of particle sizes and Reynolds numbers, and allows us to predict how focusing position depends on particle size.

physics.flu-dyn↗

arXiv2010

A two-dimensional model of low-Reynolds number swimming beneath a free surface

Biological organisms swimming at low Reynolds number are often influenced by the presence of rigid boundaries and soft interfaces. In this paper we present an analysis of locomotion near a free surface with surface tension. Using a simplified two-dimensional singularity model, and combining a complex variable approach with conformal mapping techniques, we demonstrate that the deformation of a free surface can be harnessed to produce steady locomotion parallel to the interface. The crucial physical ingredient lies in the nonlinear hydrodynamic coupling between the disturbance flow created by the swimmer and the free boundary problem at the fluid surface.

physics.flu-dyn↗

arXiv2008

Crawling beneath the free surface: Water snail locomotion

Land snails move via adhesive locomotion. Through muscular contraction and expansion of their foot, they transmit waves of shear stress through a thin layer of mucus onto a solid substrate. Since a free surface cannot support shear stress, adhesive locomotion is not a viable propulsion mechanism for water snails that travel inverted beneath the free surface. Nevertheless, the motion of the freshwater snail, Sorbeoconcha physidae, is reminiscent of that of its terrestrial counterparts, being generated by the undulation of the snail foot that is separated from the free surface by a thin layer of mucus. Here, a lubrication model is used to describe the mucus flow in the limit of small amplitude interfacial deformations. By assuming the shape of the snail foot to be a traveling sine wave and the mucus to be Newtonian, an evolution equation for the interface shape is obtained and the resulting propulsive force on the snail is calculated. This propulsive force is found to be non-zero for moderate values of Capillary number but vanishes in the limits of high and low Capillary numbers. Physically, this force arises because the snail's foot deforms the free surface, thereby generating curvature pressures and lubrication flows inside the mucus layer that couple to the topography of the foot.

physics.bio-ph↗