arXiv subjects

Supratik Guha

Publications and source records attributed to Supratik Guha.

At least 19 recordsLinked to original sources

arXiv2026

Optical decoherence in Er$^{3+}$-doped CeO$_2$ spin qubit platforms

Erbium ions (Er$^{3+}$) in cerium dioxide (CeO$_2$) represent a promising spin-photon interface for quantum communication, but the mechanisms limiting their optical coherence remain poorly understood. Using periodic hybrid density functional theory calculations with finite-size corrections, we identify Ce$^{3+}$ polarons and their complexes with oxygen vacancies and Er$^{3+}$ dopants as likely sources of optical decoherence. These defects exhibit finite photoionization cross-sections at 0.8 eV, coinciding with both the laser excitation energy used experimentally and the emission energy of Er$^{3+}$. This resonance enables photoionization of the polarons and photoluminescence quenching of Er$^{3+}$, leading to the broadening of optical linewidths, shortening of excited-state lifetimes, and introduction of charge noise. Our concentration-dependent photocurrent measurements in Er$^{3+}$-doped CeO$_2$ films under 0.8 eV illumination validate the predicted decoherence pathway. Our combined computational and experimental results identify a concrete defect-engineering target for improving the Er$^{3+}$-doped CeO$_2$ platform, and point to a decoherence mechanism likely relevant to other Er$^{3+}$-doped multivalent-oxide quantum platforms.

cond-mat.mtrl-sci↗

arXiv2025

Microstructural and preliminary optical and microwave characterization of erbium doped CaMoO$_4$ thin films

This work explores erbium-doped calcium molybdate (CaMoO$_4$) thin films grown on silicon and yttria stabilized zirconia (YSZ) substrates, as a potential solid state system for C-band (utilizing the $\sim$1.5 $\mu$m Er$^{3+}$ 4f-4f transition) quantum emitters for quantum network applications. Through molecular beam epitaxial growth experiments and electron microscopy, X-ray diffraction and reflection electron diffraction studies, we identify an incorporation limited deposition regime that enables a 1:1 Ca:Mo ratio in the growing film leading to single phase CaMoO$_4$ formation that can be in-situ doped with Er (typically 2-100 ppm). We further show that growth on silicon substrates is single phase but polycrystalline in morphology; while growth on YSZ substrates leads to high-quality epitaxial single crystalline CaMoO$_4$ films. We perform preliminary optical and microwave characterization on the suspected $Y_1 - Z_1$ transition of 2 ppm, 200 nm epitaxial CaMoO$_4$ annealed thin films and extract an optical inhomogeneous linewidth of 9.1(1) GHz, an optical excited state lifetime of 6.7(2) ms, a spectral diffusion-limited homogeneous linewidth of 6.7(4) MHz, and an EPR linewidth of 1.10(2) GHz.

cond-mat.mtrl-sci↗

arXiv2025

Spin decoherence dynamics of Er$^{3+}$ in CeO$_2$ film

Developing telecom-compatible spin-photon interfaces is essential towards scalable quantum networks. Erbium ions (Er$^{3+}$) exhibit a unique combination of a telecom (1.5 $\mu$m) optical transition and an effective spin-$1/2$ ground state, but identifying a host that enables heterogeneous device integration while preserving long optical and spin coherence remains an open challenge. We explore a new platform of Er$^{3+}$:CeO$_2$ films on silicon, offering low nuclear spin density and the potential for on-chip integration. We demonstrate a 38.8 $\mu$s spin coherence, which can be extended to 176.4\nobreakspace $\mu$s with dynamical decoupling. Pairing experiments with cluster correlation expansion calculations, we identify spectral diffusion-induced Er$^{3+}$ spin flips as the dominant decoherence mechanism and provide pathways to millisecond-scale coherence.

quant-ph↗

arXiv2024

Isolation of individual Er quantum emitters in anatase TiO$_2$ on Si photonics

Defects and dopant atoms in solid state materials are a promising platform for realizing single photon sources and quantum memories, which are the basic building blocks of quantum repeaters needed for long distance quantum networks. In particular, trivalent erbium (Er$^{3+}$) is of interest because it couples C-band telecom optical transitions with a spin-based memory platform. In order to produce quantum repeaters at the scale required for a quantum internet, it is imperative to integrate these necessary building blocks with mature and scalable semiconductor processes. In this work, we demonstrate the optical isolation of single Er$^{3+}$ ions in CMOS-compatible titanium dioxide (TiO$_2$) thin films monolithically integrated on a silicon-on-insulator (SOI) photonics platform. Our results demonstrate a first step toward the realization of a monolithically integrated and scalable quantum photonics package based on Er$^{3+}$ doped thin films.

quant-ph↗

arXiv2024

Error-Free and Current-Driven Synthetic Antiferromagnetic Domain Wall Memory Enabled by Channel Meandering

We propose a new type of multi-bit and energy-efficient magnetic memory based on current-driven, field-free, and highly controlled domain wall motion. A meandering domain wall channel with precisely interspersed pinning regions provides the multi-bit capability of a magnetic tunnel junction. The magnetic free layer of the memory device has perpendicular magnetic anisotropy and interfacial Dzyaloshinskii-Moriya interaction, so that spin-orbit torques induce efficient domain wall motion. Using micromagnetic simulations, we find two pinning mechanisms that lead to different cell designs: two-way switching and four-way switching. The memory cell design choices and the physics behind these pinning mechanisms are discussed in detail. Furthermore, we show that switching reliability and speed may be significantly improved by replacing the ferromagnetic free layer with a synthetic antiferromagnetic layer. Switching behavior and material choices will be discussed for the two implementations.

cs.ET↗

arXiv2024

Direct imaging of asymmetric interfaces and electrostatic potentials inside a hafnia-zirconia ferroelectric nanocapacitor

In hafnia-based thin-film ferroelectric devices, chemical phenomena during growth and processing such as oxygen vacancy formation and interfacial reactions appear to strongly affect device performance. However, the nanoscale structure, chemistry, and electrical potentials in these devices are not fully known, making it difficult to understand their influence on device properties. Here, we directly image the composition and electrostatic potential with nanometer resolution in the cross section of a nanocrystalline W / Hf$_{0.5}$Zr$_{0.5}$O$_{2-δ}$ (HZO) / W ferroelectric capacitor using multimodal electron microscopy. This reveals a 1.4 nm wide tungsten sub-oxide interfacial layer formed at the bottom interface during fabrication which introduces a potential dip and leads to asymmetric switching fields. Additionally, the measured inner potential in HZO is consistent with the presence of about 20% oxygen vacancies and a negative built-in potential in HZO. These chemical and electrostatic details are important to characterize and tune to achieve high performance ferroelectric devices.

cond-mat.mtrl-sci↗

arXiv2024

Controlled Spalling of Single Crystal 4H-SiC Bulk Substrates

We detail several scientific and engineering innovations which enable the controlled spalling of 10 - 50 micron thick films of single crystal 4H silicon carbide (4H-SiC) from bulk substrates. 4H-SiC's properties, including high thermal conductivity and a wide bandgap, make it an ideal candidate for high-temperature, high-voltage power electronic devices. Moreover, 4H-SiC has been shown to be an excellent host of solid-state atomic defect qubits for quantum computing and quantum networking. Because 4H-SiC single crystal substrates are expensive (due to long growth times and limited yield), techniques for removal and transfer of bulk-quality films in the tens-of-microns thickness range are highly desirable to allow for substrate reuse and integration of the separated films. In this work we utilize novel approaches for stressor layer thickness control and spalling crack initiation to demonstrate controlled spalling of 4H-SiC, the highest fracture toughness material spalled to date. Additionally, we demonstrate substrate re-use, bonding of the spalled films to carrier substrates, and explore the spin coherence of the spalled films. In preliminary studies we are able to achieve coherent spin control of neutral divacancy ($VV^{0}$) qubit ensembles and measure a quasi-bulk spin $T_{2}$ of 79.7 $\mu$s in such spalled films.

physics.app-ph↗

arXiv2024

Anomalous Purcell decay of strongly driven inhomogeneous emitters coupled to a cavity

We perform resonant fluorescence lifetime measurements on a nanocavity-coupled erbium ensemble as a function of cavity-laser detuning and pump power. Our measurements reveal an anomalous three-fold suppression of the ensemble Purcell factor at zero cavity detuning and high pump fluence. We capture qualitative aspects of this decay rate suppression using a Tavis-Cummings model of non-interacting spins coupled to a common cavity.

quant-ph↗

arXiv2023

Cryogenic hybrid magnonic circuits based on spalled YIG thin films

Yttrium iron garnet (YIG) magnonics has garnered significant research interest because of the unique properties of magnons (quasiparticles of collective spin excitation) for signal processing. In particular, hybrid systems based on YIG magnonics show great promise for quantum information science due to their broad frequency tunability and strong compatibility with other platforms. However, their broad applications have been severely constrained by substantial microwave loss in the gadolinium gallium garnet (GGG) substrate at cryogenic temperatures. In this study, we demonstrate that YIG thin films can be spalled from YIG/GGG samples. Our approach is validated by measuring hybrid devices comprising superconducting resonators and spalled YIG films, which exhibits anti-crossing features that indicate strong coupling between magnons and microwave photons. Such new capability of separating YIG thin films from GGG substrates via spalling, and the integrated superconductor-YIG devices represent a significant advancement for integrated magnonic devices, paving the way for advanced magnon-based coherent information processing.

cond-mat.mes-hall↗

arXiv2023

First-Principle Investigation Of Near-Field Energy Transfer Between Localized Quantum Emitters in Solids

We present a predictive and general approach to investigate near-field energy transfer processes between localized defects in semiconductors, which couples first principle electronic structure calculations and a nonrelativistic quantum electrodynamics description of photons in the weak-coupling regime. We apply our approach to investigate an exemplar point defect in an oxide, the F center in MgO, and we show that the energy transfer from a magnetic source, e.g., a rare earth impurity, to the vacancy can lead to spin non conserving long-lived excitation that are dominant processes in the near field, at distances relevant to the design of photonic devices and ultra-high dense memories. We also define a descriptor for coherent energy transfer to predict geometrical configurations of emitters to enable long-lived excitations, that are useful to design optical memories in semiconductor and insulators.

physics.comp-ph↗

arXiv2023

Optical and microstructural characterization of Er$^{3+}$ doped epitaxial cerium oxide on silicon

Rare-earth ion dopants in solid-state hosts are ideal candidates for quantum communication technologies such as quantum memory, due to the intrinsic spin-photon interface of the rare-earth ion combined with the integration methods available in the solid-state. Erbium-doped cerium oxide (Er:CeO$_2$) is a particularly promising platform for such a quantum memory, as it combines the telecom-wavelength (~1.5 $μ$m) 4f-4f transition of erbium, a predicted long electron spin coherence time supported by CeO$_2$, and is also near lattice-matched to silicon for heteroepitaxial growth. In this work, we report on the epitaxial growth of Er:CeO$_2$ thin films on silicon using molecular beam epitaxy (MBE), with controlled erbium concentration down to 2 parts per million (ppm). We carry out a detailed microstructural study to verify the CeO$_2$ host structure, and characterize the spin and optical properties of the embedded Er$^{3+}$ ions. In the 2-3 ppm Er regime, we identify EPR linewidths of 245(1) MHz, optical inhomogeneous linewidths of 9.5(2) GHz, optical excited state lifetimes of 3.5(1) ms, and spectral diffusion-limited homogenoeus linewidths as narrow as 4.8(3) MHz in the as-grown material. We test annealing of the Er:CeO$_2$ films up to 900 deg C, which yields modest narrowing of the inhomogeneous linewidth by 20% and extension of the excited state lifetime by 40%. We have also studied the variation of the optical properties as a function of Er doping and find that the results are consistent with the trends expected from inter-dopant charge interactions.

cond-mat.mtrl-sci↗

arXiv2023

Optical and spin coherence of Er$^{3+}$ in epitaxial CeO$_2$ on silicon

Solid-state atomic defects with optical transitions in the telecommunication bands, potentially in a nuclear spin free environment, are important for applications in fiber-based quantum networks. Erbium ions doped in CeO$_2$ offer such a desired combination. Here we report on the optical homogeneous linewidth and electron spin coherence of Er$^{3+}$ ions doped in CeO$_2$ epitaxial film grown on a Si(111) substrate. The long-lived optical transition near 1530 nm in the environmentally-protected 4f shell of Er$^{3+}$ shows a narrow homogeneous linewidth of 440 kHz with an optical coherence time of 0.72 $\mu$s at 3.6 K. The reduced nuclear spin noise in the host allows for Er$^{3+}$ electron spin polarization at 3.6 K, yielding an electron spin coherence of 0.66 $\mu$s (in the isolated ion limit) and a spin relaxation of 2.5 ms. These findings indicate the potential of Er$^{3+}$:CeO$_2$ film as a valuable platform for quantum networks and communication applications.

quant-ph↗

arXiv2023

Nanocavity-mediated Purcell enhancement of Er in TiO$_2$ thin films grown via atomic layer deposition

The use of trivalent erbium (Er$^{3+}$), typically embedded as an atomic defect in the solid-state, has widespread adoption as a dopant in telecommunications devices and shows promise as a spin-based quantum memory for quantum communication. In particular, its natural telecom C-band optical transition and spin-photon interface makes it an ideal candidate for integration into existing optical fiber networks without the need for quantum frequency conversion. However, successful scaling requires a host material with few intrinsic nuclear spins, compatibility with semiconductor foundry processes, and straightforward integration with silicon photonics. Here, we present Er-doped titanium dioxide (TiO$_2$) thin film growth on silicon substrates using a foundry-scalable atomic layer deposition process with a wide range of doping control over the Er concentration. Even though the as-grown films are amorphous, after oxygen annealing they exhibit relatively large crystalline grains, and the embedded Er ions exhibit the characteristic optical emission spectrum from anatase TiO$_2$. Critically, this growth and annealing process maintains the low surface roughness required for nanophotonic integration. Finally, we interface Er ensembles with high quality factor Si nanophotonic cavities via evanescent coupling and demonstrate a large Purcell enhancement (300) of their optical lifetime. Our findings demonstrate a low-temperature, non-destructive, and substrate-independent process for integrating Er-doped materials with silicon photonics. At high doping densities this platform can enable integrated photonic components such as on-chip amplifiers and lasers, while dilute concentrations can realize single ion quantum memories.

cond-mat.mtrl-sci↗

arXiv2023

Quasi-deterministic Localization of Er Emitters in Thin Film TiO$_2$ through Submicron-scale Crystalline Phase Control

With their shielded 4f orbitals, rare-earth ions (REIs) offer optical and electron spin transitions with good coherence properties even when embedded in a host crystal matrix, highlighting their utility as promising quantum emitters and memories for quantum information processing. Among REIs, trivalent erbium (Er$^{3+}$) uniquely has an optical transition in the telecom C-band, ideal for transmission over optical fibers, and making it well-suited for applications in quantum communication. The deployment of Er$^{3+}$ emitters into a thin film TiO$_2$ platform has been a promising step towards scalable integration; however, like many solid-state systems, the deterministic spatial placement of quantum emitters remains an open challenge. We investigate laser annealing as a means to locally tune the optical resonance of Er$^{3+}$ emitters in TiO$_2$ thin films on Si. Using both nanoscale X-ray diffraction measurements and cryogenic photoluminescence spectroscopy, we show that tightly focused below-gap laser annealing can induce anatase to rutile phase transitions in a nearly diffraction-limited area of the films and improve local crystallinity through grain growth. As a percentage of the Er:TiO$_2$ is converted to rutile, the Er$^{3+}$ optical transition blueshifts by 13 nm. We explore the effects of changing laser annealing time and show that the amount of optically active Er:rutile increases linearly with laser power. We additionally demonstrate local phase conversion on microfabricated Si structures, which holds significance for quantum photonics.

physics.app-ph↗

arXiv2023

Nanosecond electron imaging of transient electric fields and material response

Electrical pulse stimulation drives many important physical phenomena in condensed matter as well as in electronic systems and devices. Often, nanoscopic and mesoscopic mechanisms are hypothesized, but methods to image electrically driven dynamics on both their native length and time scales have so far been largely undeveloped. Here, we present an ultrafast electron microscopy approach that uses electrical pulses to induce dynamics and records both the local time-resolved electric field and corresponding material behavior with nanometer-nanosecond spatiotemporal resolution. Quantitative measurement of the time-dependent field via the electron beam deflection is demonstrated by recording the field between two electrodes with single-ns temporal resolution. We then show that this can be applied in a material by correlating applied field with resulting dynamics in TaS$_{2}$. First, time-resolved electron diffraction is used to simultaneously record the electric field and crystal structure change in a selected region during a 20 ns voltage pulse, showing how a charge density wave transition evolves during and after the applied field. Then, time-resolved nanoimaging is demonstrated, revealing heterogeneous distortions that occur in the freestanding flake during a longer, lower amplitude pulse. Altogether, these results pave the way for future experiments that will uncover the nanoscale dynamics underlying electrically driven phenomena.

cond-mat.mes-hall↗

arXiv2022

A Co-design view of Compute in-Memory with Non-Volatile Elements for Neural Networks

Deep Learning neural networks are pervasive, but traditional computer architectures are reaching the limits of being able to efficiently execute them for the large workloads of today. They are limited by the von Neumann bottleneck: the high cost in energy and latency incurred in moving data between memory and the compute engine. Today, special CMOS designs address this bottleneck. The next generation of computing hardware will need to eliminate or dramatically mitigate this bottleneck. We discuss how compute-in-memory can play an important part in this development. Here, a non-volatile memory based cross-bar architecture forms the heart of an engine that uses an analog process to parallelize the matrix vector multiplication operation, repeatedly used in all neural network workloads. The cross-bar architecture, at times referred to as a neuromorphic approach, can be a key hardware element in future computing machines. In the first part of this review we take a co-design view of the design constraints and the demands it places on the new materials and memory devices that anchor the cross-bar architecture. In the second part, we review what is knows about the different new non-volatile memory materials and devices suited for compute in-memory, and discuss the outlook and challenges.

cs.ET↗

arXiv2022

Purcell enhancement of erbium ions in TiO$_{2}$ on silicon nanocavities

Isolated solid-state atomic defects with telecom optical transitions are ideal quantum photon emitters and spin qubits for applications in long-distance quantum communication networks. Prototypical telecom defects such as erbium suffer from poor photon emission rates, requiring photonic enhancement using resonant optical cavities. Many of the traditional hosts for erbium ions are not amenable to direct incorporation with existing integrated photonics platforms, limiting scalable fabrication of qubit-based devices. Here we present a scalable approach towards CMOS-compatible telecom qubits by using erbium-doped titanium dioxide thin films grown atop silicon-on-insulator substrates. From this heterostructure, we have fabricated one-dimensional photonic crystal cavities demonstrating quality factors in excess of $5\times10^{4}$ and corresponding Purcell-enhanced optical emission rates of the erbium ensembles in excess of 200. This easily fabricated materials platform represents an important step towards realizing telecom quantum memories in a scalable qubit architecture compatible with mature silicon technologies.

cond-mat.mtrl-sci↗

arXiv2022

Dynamic-quenching of a single-photon avalanche photodetector using an adaptive resistive switch

One of the most common approaches for quenching single-photon avalanche diodes is to use a passive resistor in series with it. A drawback of this approach has been the limited recovery speed of the single-photon avalanche diodes. High resistance is needed to quench the avalanche, leading to slower recharging of the single-photon avalanche diodes depletion capacitor. We address this issue by replacing a fixed quenching resistor with a bias-dependent adaptive resistive switch. Reversible generation of metallic conduction enables switching between low and high resistance states under unipolar bias. As an example, using a Pt/Al2O3/Ag resistor with a commercial silicon single-photon avalanche diodes, we demonstrate avalanche pulse widths as small as ~30 ns, 10x smaller than a passively quenched approach, thus significantly improving the single-photon avalanche diodes frequency response. The experimental results are consistent with a model where the adaptive resistor dynamically changes its resistance during discharging and recharging the single-photon avalanche diodes.

physics.ins-det↗