arXiv subjects

Supriya Ghosh

Publications and source records attributed to Supriya Ghosh.

18 recordsLinked to original sources

arXiv2026

Electron Beam Radiolysis-Assisted Growth of Rutile TiO2 Thin Films

A new approach for growing crystalline thin films is developed that takes advantage of electron beam radiolysis being a constructive force to rearrange atoms into a crystalline structure. It is demonstrated that by irradiating the surface of a TiO2 film by an electron beam supplied by a reflection high energy electron diffraction (RHEED) gun inside the MBE chamber during growth, a crystalline film can be grown at much lower substrate temperatures, where deposited films typically appear amorphous. Here, rutile TiO2 films were grown using hybrid molecular beam epitaxy (MBE) allowing atomic level control of growth as well as an observation of radiolysis-driven crystallization. Analysis was carried out using a combination of SEM and atomic-resolution STEM imaging. It is also shown that by tuning the temperature of the substrate and the dose of the electron beam, the degree of crystallinity of the film can be controlled.

cond-mat.mtrl-sci↗

arXiv2026

Efficiently gate-tunable ferromagnetism in ferromagnetic semiconductor-Dirac semimetal p-n heterojunctions

We use molecular beam epitaxy to develop a gate tunable p-n heterojunction that interfaces a canonical Dirac semimetal, Cd$_3$As$_2$, and a ferromagnetic semiconductor, In$_{1-x}$Mn$_x$As, with perpendicular magnetic anisotropy. Measurements of the anomalous Hall effect in top-gated Cd$_3$As$_2$/In$_{1-x}$Mn$_x$As devices show that the ferromagnetic Curie temperature ($T_\mathrm{C}$) can be efficiently tuned using a modest gate voltage of $\sim 10$ V, corresponding to a sensitivity to electric field ($E$) of $\Delta T_{\mathrm{C}}/\Delta E \sim 10$ K/MV/cm). The voltage tuning of $T_\mathrm{C}$ saturates near the charge neutrality point of Cd$_3$As$_2$ and vanishes at positive gate voltage in appropriately designed heterostructures. This non-monotonic behavior cannot be explained solely by hole-mediated ferromagnetism in the In$_{1-x}$Mn$_x$As alone, suggesting an interaction between the Dirac semimetal and the ferromagnetic semiconductor. Our results identify Cd$_3$As$_2$/In$_{1-x}$Mn$_x$As heterojunctions as a potentially attractive platform for studying emergent phenomena arising from the interplay between broken symmetry, topology, and magnetism in a topological semimetal.

cond-mat.mes-hall↗

arXiv2025

Interface-engineered voltage-driven magnetic tunnel junctions with ultra-low-energy magnetization switching

Electric-field control of spin states offers a promising route to ultra-low-power, ultra-fast magnetization switching in spintronic devices such as magnetic tunnel junctions (MTJs). Recent progress in modulating spin-orbit interactions at the interfaces between 3d transition-metal ferromagnets and dielectric layers has underscored the role of atomic-scale heavy-metal doping in optimizing device performance. Here, we experimentally demonstrate highly energy-efficient, voltage-driven magnetization switching in MTJs exhibiting large tunnel magnetoresistance (TMR), enabled by a remote doping technique that precisely controls the iridium (Ir) concentration near the MgO-CoFeB interface in the free layer. Our devices achieve a switching energy of only 3.5 fJ per bit for nanoscale MTJs operating in the sub-nanosecond regime, while maintaining a TMR ratio up to 160 percent after 400 C post-annealing. These findings establish a viable pathway toward scalable, ultra-low-power nonvolatile memory, positioning voltage-driven MTJs as strong contenders for next-generation magnetoresistive random-access memory (MRAM) and other emerging spintronic applications.

cond-mat.mes-hall↗

arXiv2025

Altermagnetic band splitting in 10 nm epitaxial CrSb thin films

Altermagnets are a newly identified family of collinear antiferromagnets with momentum-dependent spin-split band structure of non-relativistic origin, derived from spin-group symmetry-protected crystal structures. Among candidate altermagnets, CrSb is attractive for potential applications because of a large spin-splitting near the Fermi level and a high Neel transition temperature of around 700 K. We use molecular beam epitaxy to synthesize CrSb (0001) thin films with thicknesses ranging from 10 nm to 100 nm. Structural characterization, using reflection high energy electron diffraction, scanning transmission electron microscopy, and X-ray diffraction, demonstrates the growth of epitaxial films with good crystallinity. Polarized neutron reflectometry shows the absence of any net magnetization, consistent with antiferromagnetic order. In vacuo angle resolved photoemission spectroscopy (ARPES) measurements probe the band structure in a previously unexplored regime of film thickness, down to 10 nm. These ARPES measurements show a three-dimensional momentum-dependent band splitting of up to 0.7 eV with g-wave symmetry, consistent with that seen in prior studies of bulk single crystals. The distinct altermagnetic band structure required for potential spin-transport applications survives down to the 10 nm thin film limit at room temperature.

cond-mat.mtrl-sci↗

arXiv2024

Patterning of Fine Features on Material Surfaces Using a Ga Ion-Beam in a FIB-SEM

Since an ion-beam is a viable attractive alternative to other material surface patterning techniques like an electron-beam, a study of the structure, composition and dimension of patterned lines created on surfaces of Si and SrTiO3 wafers with a Ga ion-beam was carried out. A combination of top-view SEM and cross-sectional STEM imaging and EDX spectroscopy applied to the patterned lines showed that the total ion-dose (DI) is the key parameter affecting the characteristics of the patterned lines, which can be adjusted by the degree of overlap between adjacent spots, beam dwell time at each spot, and the number of beam-passes for every beam size and current. A strong dependence between the used ion-doses and the patterned lines sizes was observed and quantified. At higher ion-doses (DI > 10^15 ions/cm^2), the Ga ions remove part of the material in the exposed area creating channels surrounded with amorphized regions whereas, at lower ion-doses only amorphization occurs, creating a ridge on the wafer surface. Further, to pattern lines with similar sizes, an order of magnitude different ion-doses might be required in different materials as was the case with Si and SrTiO3. The quantification of line sizes showed that with this approach, lines as fine as 10 nm can be reproducibly patterned and characterized on the surfaces of materials, when low ion-doses are used, typically in the range of 10^14-10^15 ions/cm^2.

cond-mat.mtrl-sci↗

arXiv2024

Rashba spin splitting-induced topological Hall effect in a Dirac semimetal-ferromagnetic semiconductor heterostructure

We use a concerted theory-experiment effort to investigate the formation of chiral real space spin texture when the archetypal Dirac semimetal Cd$_3$As$_2$ is interfaced with In$_{1-x}$Mn$_x$As, a ferromagnetic semiconductor with perpendicular magnetic anisotropy. Our calculations reveal a nonzero off-diagonal spin susceptibility in the Cd$_3$As$_2$ layer due to the Rashba spin-orbit coupling from broken inversion symmetry. This implies the presence of a Dzyaloshinskii-Moriya interaction between local moments in the In$_{1-x}$Mn$_x$As layer, mediated by Dirac electrons in the vicinal Cd$_3$As$_2$ layer, potentially creating the conditions for a real space chiral spin texture. Using electrical magnetoresistance measurements at low temperature, we observe an emergent excess contribution to the transverse magneto-resistance whose behavior is consistent with a topological Hall effect arising from the formation of an interfacial chiral spin texture. This excess Hall voltage varies with gate voltage, indicating a promising electrostatically-tunable platform for understanding the interplay between the helical momentum space states of a Dirac semimetal and chiral real space spin textures in a ferromagnet.

cond-mat.mes-hall↗

arXiv2024

Site-Specific Plan-view (S)TEM Sample Preparation from Thin Films using a Dual-Beam FIB-SEM

Plan-view transmission electron microscopy (TEM) samples are key to understand the atomic structure and associated properties of materials along their growth orientation, especially for thin films that are stain-engineered onto different substrates for property tuning. In this work, we present a method to prepare high-quality plan-view samples for analytical STEM study from thin-films using a dual-beam focused ion beam scanning electron microscope (FIB-SEM) system. The samples were prepared from thin films of perovskite oxides and metal oxides ranging from 20-80 nm thicknesses, grown on different substrates using molecular beam epitaxy. A site-specific sample preparation from the area of interest is described, which includes sample attachment and thinning techniques to minimize damage to the final TEM samples. While optimized for the thin film-like geometry, this method can be extended to other site-specific plan-view samples from bulk materials. Aberration-corrected scanning (S)TEM was used to access the quality of the thin film in each sample. This enabled direct visualization of line defects in perovskite BaSnO3 and Ir particle formation and texturing in IrO2 films.

physics.app-ph↗

arXiv2023

Spin Hall conductivity in Bi$_{1-x}$Sb$_x$ as an experimental test of bulk-boundary correspondence

Bulk-boundary correspondence is a foundational principle underlying the electronic band structure and physical behavior of topological quantum materials. Although it has been rigorously tested in topological systems where the physical properties involve charge currents, it remains unclear whether bulk-boundary correspondence should also hold for non-conserved spin currents. We study charge-to-spin conversion in a canonical topological insulator, Bi$_{1-x}$Sb$_x$, to address this fundamentally unresolved question. We use spin-torque ferromagnetic resonance measurements to accurately probe the charge-to-spin conversion efficiency in epitaxial Bi$_{1-x}$Sb$_x$~thin films of high structural quality spanning the entire range of composition, including both trivial and topological band structures, as verified using {\it in vacuo} angle-resolved photoemission spectroscopy. From these measurements, we deduce the effective spin Hall conductivity (SHC) and find excellent agreement with the values predicted by tight-binding calculations for the intrinsic SHC of the bulk bands. These results provide strong evidence that the strong spin-orbit entanglement of bulk states well below the Fermi energy connects directly to the SHC in epitaxial Bi$_{1-x}$Sb$_x$~films interfaced with a metallic ferromagnet. The excellent agreement between theory and experiment points to the generic value of analyses focused entirely on bulk properties, even for topological systems involving non-conserved spin currents.

cond-mat.mes-hall↗

arXiv2023

Epitaxial growth and characterization of Bi$_{1-x}$Sb$_x$ thin films on (0001) sapphire substrates

We report the molecular beam epitaxy of Bi_1-xSb_x thin films ($0 \leq x \leq 1$) on (0001) sapphire substrates using a thin (Bi,Sb)$_2$Te$_3$ buffer layer. Characterization of the films using reflection high energy diffraction, x-ray diffraction, atomic force microscopy, and scanning transmission electron microscopy reveals epitaxial growth of films of reasonable structural quality. This is further confirmed via x-ray diffraction pole figures that determine the epitaxial registry between the thin film and substrate. We further investigate the microscopic structure of thin films via Raman spectroscopy, demonstrating how the vibrational modes vary as the composition changes and discussing the implications for the crystal structure. We also characterize the samples using electrical transport measurements.

cond-mat.mtrl-sci↗

arXiv2023

Multiflagellarity leads to the size-independent swimming speed of peritrichous bacteria

To swim through a viscous fluid, a flagellated bacterium must overcome the fluid drag on its body by rotating a flagellum or a bundle of multiple flagella. Because the drag increases with the size of bacteria, it is expected theoretically that the swimming speed of a bacterium inversely correlates with its body length. Nevertheless, despite extensive research, the fundamental size-speed relation of flagellated bacteria remains unclear with different experiments reporting conflicting results. Here, by critically reviewing the existing evidence and synergizing our own experiments of large sample sizes, hydrodynamic modeling and simulations, we demonstrate that the average swimming speed of \textit{Escherichia coli}, a premier model of peritrichous bacteria, is independent of their body length. Our quantitative analysis shows that such a counterintuitive relation is the consequence of the collective flagellar dynamics dictated by the linear correlation between the body length and the number of flagella of bacteria. Notably, our study reveals how bacteria utilize the increasing number of flagella to regulate the flagellar motor load. The collective load sharing among multiple flagella results in a lower load on each flagellar motor and therefore faster flagellar rotation, which compensates for the higher fluid drag on the longer bodies of bacteria. Without this balancing mechanism, the swimming speed of monotrichous bacteria generically decreases with increasing body length, a feature limiting the size variation of the bacteria. Altogether, our study resolves a long-standing controversy over the size-speed relation of flagellated bacteria and provides new insights into the functional benefit of multiflagellarity in bacteria.

physics.flu-dyn↗

arXiv2023

Thin film growth of the Weyl semimetal NbAs

We report the synthesis and characterization of thin films of the Weyl semimetal NbAs grown on GaAs (100) and GaAs (111)B substrates. By choosing the appropriate substrate, we can stabilize the growth of NbAs in the (001) and (100) directions. We combine x-ray characterization with high-angle annular dark field scanning transmission electron microscopy to understand both the macroscopic and microscopic structure of the NbAs thin films. We show that these films are textured with domains that are tens of nanometers in size and that, on a macroscopic scale, are mostly aligned to a single crystalline direction. Finally, we describe electrical transport measurements that reveal similar behavior in films grown in both crystalline directions, namely carrier densities of $\sim 10^{21} - 10^{22} $

cond-mat.mtrl-sci↗

arXiv2022

Co-operative Influence of O2 and H2O in the Degradation of Layered Black Arsenic

Layered black arsenic (b-As) has recently emerged as a new anisotropic two-dimensional (2D) semiconducting material with applications in electronic devices. Understanding factors affecting the ambient stability of this material remains crucial for its applications. Herein we use first-principles density functional theory (DFT) calculations to examine the stability of the (010) and (101) surfaces of b-As in the presence of oxygen (O2) and water (H2O). We show that the (101) surface of b-As can easily oxidize in presence of O2. In the presence of moisture contained in air, the oxidized b-As surfaces favorably react with H2O molecules to volatilize As in the form of As(OH)3 and AsO(OH), which results in the degradation of the b-As surface, predominantly across the (101) surface. These predictions are in good agreement with experimental electron microscopy observations, thus demonstrating the co-operative reactivity of O2 and H2O in the degradation of layered b-As under ambient conditions.

cond-mat.mtrl-sci↗

arXiv2022

Room-Temperature Valence Transition in a Strain-Tuned Perovskite Oxide

Cobalt oxides have long been understood to display intriguing phenomena known as spin-state crossovers, where the cobalt ion spin changes vs. temperature, pressure, etc. A very different situation was recently uncovered in praseodymium-containing cobalt oxides, where a first-order coupled spin-state/structural/metal-insulator transition occurs, driven by a remarkable praseodymium valence transition. Such valence transitions, particularly when triggering spin-state and metal-insulator transitions, offer highly appealing functionality, but have thus far been confined to cryogenic temperatures in bulk materials (e.g., 90 K in Pr1-xCaxCoO3). Here, we show that in thin films of the complex perovskite (Pr1-yYy)1-xCaxCoO3-δ, heteroepitaxial strain tuning enables stabilization of valence-driven spin-state/structural/metal-insulator transitions to at least 291 K, i.e., around room temperature. The technological implications of this result are accompanied by fundamental prospects, as complete strain control of the electronic ground state is demonstrated, from ferromagnetic metal under tension to nonmagnetic insulator under compression, thereby exposing a potential novel quantum critical point.

cond-mat.mtrl-sci↗

arXiv2022

Giant spin torque efficiency in naturally oxidized polycrystalline TaAs thin films

We report the measurement of efficient charge-to-spin conversion at room temperature in Weyl semimetal/ferromagnet heterostructures with both oxidized and pristine interfaces. Polycrystalline films of the Weyl semimetal, TaAs, are grown by molecular beam epitaxy on (001) GaAs and interfaced with a metallic ferromagnet (Ni$_{0.8}$Fe$_{0.2}$). Spin torque ferromagnetic resonance (ST-FMR) measurements in samples with an oxidized interface yield a spin torque efficiency as large as $ξ_{\mathrm{FMR}}=0.45\pm 0.25$ for a 8 nm Ni$_{0.8}$Fe$_{0.2}$ layer thickness. By studying ST-FMR in these samples with varying Ni$_{0.8}$Fe$_{0.2}$ layer thickness, we extract a damping-like torque efficiency as high as $ξ_{\mathrm{DL}}=1.36\pm 0.66$. In samples with a pristine (unoxidized) interface, the spin torque efficiency has opposite sign to that observed in oxidized samples ($ξ_{\mathrm{FMR}}=-0.27\pm 0.14$ for a 5 nm Ni$_{0.8}$Fe$_{0.2}$ layer thickness). We also find a lower bound on the spin Hall conductivity ($424 \pm 110 \frac{\hbar}{e}$ S/cm) which is surprisingly consistent with theoretical predictions for the single crystal Weyl semimetal state of TaAs.

cond-mat.mtrl-sci↗

arXiv2021

Challenges to magnetic doping of thin films of the Dirac semimetal Cd$_3$As$_2$

Magnetic doping of topological quantum materials provides an attractive route for studying the effects of time-reversal symmetry breaking. Thus motivated, we explore the introduction of the transition metal Mn into thin films of the Dirac semimetal Cd3As2 during growth by molecular beam epitaxy. Scanning transmission electron microscopy measurements show the formation of a Mn-rich phase at the top surface of Mn-doped Cd3As2 thin films grown using both uniform doping and delta doping. This suggests that Mn acts as a surfactant during epitaxial growth of Cd3As2, resulting in phase separation. Magnetometry measurements of such samples indicate a ferromagnetic phase with out-of-plane magnetic anisotropy. Electrical magneto-transport measurements of these films as a function of temperature, magnetic field, and chemical potential reveal a lower carrier density and higher electron mobility compared to pristine Cd3As2 films grown under similar conditions. This suggests that the surfactant effect might also serve to getter impurities. We observe robust quantum transport (Shubnikov-de Haas oscillations and an incipient integer quantum Hall effect) in very thin (7 nm) Cd3As2 films despite being in direct contact with a structurally disordered surface ferromagnetic overlayer.

cond-mat.mtrl-sci↗

arXiv2021

ZrTe2/CrTe2: an epitaxial van der Waals platform for spintronics

The rapid discovery of two-dimensional (2D) van der Waals (vdW) quantum materials has led to heterostructures that integrate diverse quantum functionalities such as topological phases, magnetism, and superconductivity. In this context, the epitaxial synthesis of vdW heterostructures with well-controlled interfaces is an attractive route towards wafer-scale platforms for systematically exploring fundamental properties and fashioning proof-of-concept devices. Here, we use molecular beam epitaxy to synthesize a vdW heterostructure that interfaces two material systems of contemporary interest: a 2D ferromagnet (1T-CrTe2) and a topological semimetal (ZrTe2). We find that one unit-cell (u.c.) thick 1T-CrTe2 grown epitaxially on ZrTe2 is a 2D ferromagnet with a clear anomalous Hall effect. In thicker samples (12 u.c. thick CrTe2), the anomalous Hall effect has characteristics that may arise from real-space Berry curvature. Finally, in ultrathin CrTe2 (3 u.c. thickness), we demonstrate current-driven magnetization switching in a full vdW topological semimetal/2D ferromagnet heterostructure device.

cond-mat.mtrl-sci↗

arXiv2021

Spin and charge interconversion in Dirac semimetal thin films

We report spin-to-charge and charge-to-spin conversion at room temperature in heterostructure devices that interface an archetypal Dirac semimetal, Cd3As2, with a metallic ferromagnet, Ni0.80Fe0.20 (permalloy). The spin-charge interconversion is detected by both spin torque ferromagnetic resonance and ferromagnetic resonance driven spin pumping. Analysis of the symmetric and anti-symmetric components of the mixing voltage in spin torque ferromagnetic resonance and the frequency and power dependence of the spin pumping signal show that the behavior of these processes is consistent with previously reported spin-charge interconversion mechanisms in heavy metals, topological insulators, and Weyl semimetals. We find that the efficiency of spin-charge interconversion in Cd3As2/permalloy bilayers can be comparable to that in heavy metals. We discuss the underlying mechanisms by comparing our results with first principles calculations.

cond-mat.mtrl-sci↗

arXiv2020

Layer-dependence of dielectric response and water-enhanced ambient degradation of highly-anisotropic black As

Black arsenic (BAs) is a van der Waals layered material with a puckered honeycomb structure and has received increased interest due to its anisotropic properties and promising performance in devices. Here, crystalline structure, thickness-dependent dielectric responses, and ambient stability of BAs nanosheets are investigated using STEM imaging and spectroscopy. Atomic-resolution HAADF-STEM images directly visualize the three-dimensional structure and evaluate the degree of anisotropy. STEM-EELS is used to measure the dielectric response of BAs as a function of the number of layers. Finally, BAs degradation under different ambient environments is studied highlighting high sensitivity to moisture in the air.

cond-mat.mtrl-sci↗