arXiv subjects

Supriya Mandal

Publications and source records attributed to Supriya Mandal.

11 recordsLinked to original sources

arXiv2026

An ultracompact dilution refrigerator for fast quantum device characterization

Rapid thermal cycling is a central bottleneck in the development of superconducting quantum devices: conventional dilution refrigerators require cooldowns of a day or more and substantial cryogenic infrastructure, which throttles the fabricate-measure-redesign loop. We present an ultracompact dilution refrigerator (3 kg in mass and 100 mm in diameter) that completes a full cooldown-warm-up cycle to a base temperature of 70 mK in 1.2 hours when unloaded, and in 2.1 hours when fully equipped with the microwave wiring required for qubit measurements, while delivering 20 microW of cooling power at 100 mK. We validate the platform through a complete characterization of a two-fluxonium device: we extract the full circuit Hamiltonian by two-tone spectroscopy, measure energy-relaxation and coherence times, and benchmark single-qubit control. Although the relaxation time is limited by the base temperature of the system, we reach a single-qubit gate fidelity of up to 99%, at the coherence limit set by our operating temperature. These results demonstrate that compact, fast-cycling dilution refrigeration can support state-of-the-art quantum-device characterization without sacrificing measurement quality, offering a practical route to high-throughput quantum-hardware development.

quant-ph↗

arXiv2026

Superconducting cavity probes sliding ferroelectricity in small-angle twisted WSe$_2$

Ferroelectricity is a property of materials that exhibit spontaneous charge polarization. Ferroelectricity in 2D materials is interesting because of their applications in memory devices and field-effect transistors. Recently, a new type of ferroelectricity, known as sliding ferroelectricity, has been discovered, in which parallel-stacked bilayers of hexagonal boron nitride (hBN) or transition metal dichalcogenides (TMDCs) develop an out-of-plane electric polarization. In this work, we probe the polarization of small-angle parallel stacked WSe$_2$ by measuring its high-frequency AC response, achieved by embedding it into a half-wave superconducting coplanar waveguide cavity. We observe a hysteretic response in the capacitance of the stack and quality factor of the cavity, confirming ferroelectric switching in the system. Our results further reveal relaxation effects associated with ferroelectric domain-wall motion. This cavity-based technique has potential applications in probing domain-wall dynamics in a ferroelectric system at high frequencies.

cond-mat.mes-hall↗

arXiv2025

Cavity based sensing of antiferromagnetic canting and nonzero-momentum spin waves in a van der Waals cavity-magnon-polariton system

Cavity-magnon-polaritons are hybrid excitations from the interaction between cavity photons and magnons, the quanta of collective spin oscillations. Along with the tunability of the magnon-photon coupling strength, fast information transfer and conversion speed are desired in hybrid devices. This can be achieved utilizing the propagating nature of spin waves with non-zero momentum for their ultra-fast time dynamics and reduced ohmic dissipation. Antiferromagnets are particularly interesting as hosts for magnons since stray-field interactions are minimized, and they support multiple modes with distinctive magnetic-field behavior across the phase diagram. CrCl3 is a van der Waals antiferromagnet having a strong easy-plane anisotropy and a weak in-plane easy-axis anisotropy. Despite some magnetic resonance studies, the impact of magnetic reorientation of spins in CrCl3 on cavity-magnon-polariton interaction strength as a function of magnetic field remains largely unexplored. In this study, we investigate the coupling between magnons in CrCl3 and photons in a coplanar waveguide resonator as a function of magnetic field. In particular, we find that the magnon-photon coupling strength varies nonmonotonically and distinctly with the magnetic field for both acoustic and optical magnons, enabling tuning of the coupling strength with an external magnetic field as a knob. We find the signature of spin-flop transition in two harmonics of the cavity due to a stronger dispersive coupling between optical magnons and cavity photons at lower fields. Additionally, we find standing modes formed by spin waves with nonzero momentum associated with the two hybrid magnons when the external field is applied at an angle with the crystal plane. These modes do not undergo substantial coupling with the cavity mode unlike the antiferromagnetic modes and can be used as low-loss propagation channels in hybrid devices.

cond-mat.mes-hall↗

arXiv2025

Fluxonium as a control qubit for bosonic quantum information

Bosonic codes in superconducting resonators are a hardware-efficient avenue for quantum error correction and benefit from favorable error hierarchies provided by long-lived cavities compared to typical superconducting qubits. The required coupling to an ancillary control qubit, however, can negate these benefits by inducing highly detrimental effects such as excess decoherence and undesired nonlinearities. An important question is thus whether a cavity-qubit coupling can be realized that offers readout and control capabilities without spoiling the cavity. Here, motivated by its long lifetime and design flexibility of its Hamiltonian, we experimentally investigate the fluxonium as a control qubit for superconducting cavities. We couple a fluxonium qubit to a superconducting resonator in the strong-dispersive regime and use it to measure the coherence and inherited nonlinearities of the resonator. We then demonstrate universal control by preparing and characterizing resonator Fock states and their superpositions, with fidelities limited by resonator decay in our planar prototype device. Finally, we use the predictability of the resonator's inherited nonlinearities to show numerically that the fluxonium can reach cavity-coupling regimes that eliminate undesirable cavity nonlinearities. These results demonstrate the potential of the fluxonium as a high-performance bosonic control qubit for superconducting cavities.

quant-ph↗

arXiv2024

A high-efficiency plug-and-play superconducting qubit network

Modular architectures are a promising approach to scale quantum devices to the point of fault tolerance and utility. Modularity is particularly appealing for superconducting qubits, as monolithically manufactured devices are limited in both system size and quality. Constructing complex quantum systems as networks of interchangeable modules can overcome this challenge through `Lego-like' assembly, reconfiguration, and expansion, in a spirit similar to modern classical computers. First prototypical superconducting quantum device networks have been demonstrated. Interfaces that simultaneously permit interchangeability and high-fidelity operations remain a crucial challenge, however. Here, we demonstrate a high-efficiency interconnect based on a detachable cable between superconducting qubit devices. We overcome the inevitable loss in a detachable connection through a fast pump scheme, enabling inter-module SWAP efficiencies at the 99%-level in less than 100 ns. We use this scheme to generate high-fidelity entanglement and operate a distributed logical dual-rail qubit. At the observed ~1% error rate, operations through the interconnect are at the threshold for fault-tolerance. These results introduce a modular architecture for scaling quantum processors with reconfigurable and expandable networks.

quant-ph↗

arXiv2024

Superconducting Cavity-Based Sensing of Band Gaps in 2D Materials

The superconducting coplanar waveguide (SCPW) cavity plays an essential role in various areas like superconducting qubits, parametric amplifiers, radiation detectors, and studying magnon-photon and photon-phonon coupling. Despite its wide-ranging applications, the use of SCPW cavities to study various van der Waals 2D materials is relatively unexplored. The resonant modes of the SCPW cavity exquisitely sense the dielectric environment. In this work, we measure the charge compressibility of bilayer graphene coupled to a half-wavelength SCPW cavity. Our approach provides a means to detect subtle changes in the capacitance of the bilayer graphene heterostructure, which depends on the compressibility of bilayer graphene, manifesting as shifts in the resonant frequency of the cavity. This method holds promise for exploring a wide class of van der Waals 2D materials, including transition metal dichalcogenides (TMDs) and their moir\'e where DC transport measurement is challenging.

cond-mat.mes-hall↗

arXiv2022

Dynamics of an interfacial bubble controls adhesion mechanics in a van der Waals heterostructure

2D van der Waals heterostructures (vdWH) can result in novel functionality that crucially depends on interfacial structure and disorder. Bubbles at the vdWH interface can modify the interfacial structure. We probe the dynamics of a bubble at the interface of a graphene-hBN vdWH by using it as the drumhead of a NEMS device because nanomechanical devices are exquisite sensors. For drums with different interfacial bubbles, we measure the evolution of the resonant frequency and spatial mode shape as a function of electrostatic pulling. We show that the hysteretic detachment of layers of vdWH is triggered by the growth of large bubbles. The bubble growth takes place due to the concentration of stress resembling the initiation of fracture. The small bubbles at the heterostructure interface do not result in delamination as they are smaller than a critical fracture length. We provide insight into frictional dynamics and interfacial fracture of vdWH.

cond-mat.mes-hall↗

arXiv2022

Quantum noise limited microwave amplification using a graphene Josephson junction

Josephson junctions (JJ) and their tunable properties, including their nonlinearities, form the core of superconducting circuit quantum electrodynamics (cQED). In quantum circuits, low-noise amplification of feeble microwave signals is essential and the Josephson parametric amplifiers (JPA) are the widely used devices. The existing JPAs are based on Al-AlOx-Al tunnel junctions realized in a superconducting quantum interference device geometry, where magnetic flux is the knob for tuning the frequency. Recent experimental realizations of 2D van der Waals JJs provide an opportunity to implement various cQED devices with the added advantage of tuning the junction properties and the operating point using a gate potential. While other components of a possible 2D van der Waals cQED architecture have been demonstrated -- quantum noise limited amplifier, an essential component, has not been realized. Here we implement a quantum noise limited JPA, using a graphene JJ, that has linear resonance gate tunability of 3.5 GHz. We report 24 dB amplification with 10 MHz bandwidth and -130 dBm saturation power; performance on par with the best single-junction JPAs. Importantly, our gate tunable JPA works in the quantum-limited noise regime which makes it an attractive option for highly sensitive signal processing. Our work has implications for novel bolometers -- the low heat capacity of graphene together with JJ nonlinearity can result in an extremely sensitive microwave bolometer embedded inside a quantum noise-limited amplifier. In general, our work will open up exploration of scalable device architecture of 2D van der Waals materials by integrating a sensor with the quantum amplifier.

cond-mat.mes-hall↗

arXiv2022

Superconducting vortex-charge measurement using cavity electromechanics

As the magnetic field penetrates the surface of a superconductor, it results in the formation of flux-vortices. It has been predicted that the flux-vortices will have a charged vortex core and create a dipolelike electric field. Such a charge trapping in vortices is particularly enhanced in high-T$_c$ superconductors (HTS). Here, we integrate a mechanical resonator made of a thin flake of HTS Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$ into a microwave circuit to realize a cavity-electromechanical device. Due to the exquisite sensitivity of cavity-based devices to the external forces, we directly detect the charges in the flux-vortices by measuring the electromechanical response of the mechanical resonator. Our measurements reveal the strength of surface electric dipole moment due to a single vortex core to be approximately 30~$|e|a_B$, equivalent to a vortex charge per CuO$_2$ layer of $3.7\times 10^{-2}|e|$, where $a_B$ is the Bohr radius and $e$ is the electronic charge.

cond-mat.supr-con↗

arXiv2021

Coplanar cavity for strong coupling between photons and magnons in van der Waals antiferromagnet

We investigate the performance of niobium nitride superconducting coplanar waveguide resonators towards hybrid quantum devices with magnon-photon coupling. We find internal quality factors ~ 20000 at 20 mK base temperature, in zero magnetic field. We find that by reducing film thickness below 100 nm internal quality factor greater than 1000 can be maintained up to parallel magnetic field of ~ 1 T and perpendicular magnetic field of ~ 100 mT. We further demonstrate strong coupling of microwave photons in these resonators, with magnons in chromium trichloride, a van der Waals antiferromagnet, which shows that these cavities serve as a good platform for studying magnon-photon coupling in 2D magnonics based hybrid quantum systems. We demonstrate strong magnon-photon coupling for both optical and acoustic magnon modes of an antiferromagnet.

cond-mat.mes-hall↗

arXiv2020

Evidence of standing spin-waves in a van der Waals magnetic material

Spin-waves have been studied for data storage, communication and logic circuits in the field of spintronics based on their potential to substitute electrons. Recent discovery of magnetism in two-dimensional (2D) systems such as monolayer CrI$_3$ and Cr$_2$Ge$_2$Te$_6$ has led to a renewed interest in such applications of magnetism in the 2D limit. Here we present direct evidence of standing spin-waves along with the uniform precessional resonance modes in van der Waals magnetic material, CrCl$_3$. Our experiment is the first direct observation of standing spin-wave modes, set up across a thickness of 20 $μ$m, in a van der Waals material. We detect standing spin-waves in the vicinity of both, optical and acoustic, branches of the antiferromagnetic resonance. We also observe magnon-magnon coupling, softening of resonance modes with temperature and extract the evolution of interlayer exchange field as a function of temperature.

cond-mat.mtrl-sci↗