arXiv subjects

Suren Gourapura

Publications and source records attributed to Suren Gourapura.

8 recordsLinked to original sources

arXiv2026

Multi-sensor fusion for fine-guidance and milliarcsecond-level attitude estimation of balloon-borne telescope

Balloon-borne telescopes rely on fine-guidance systems to achieve milliarcsecond image stability despite residual disturbances from the balloon environment. In these systems, the Fast Steering Mirror (FSM) stabilizes the image in two focal-plane axes, but leaves systematic, field-dependent residual motion induced by boresight roll. This effect, referred to as roll leakage, becomes more important for wider fields of view. In this work, roll leakage is characterized using data from the 2023 Superpressure Balloon-borne Imaging Telescope (SuperBIT) science flight. SuperBIT is a 0.5-m near-ultraviolet to near-infrared telescope that demonstrated milliarcsecond-level image stability during its 45-night science flight. We find that passive focal-plane star-camera measurements correlate strongly with independent roll measurements across a large set of science exposures, showing that boresight roll frequently drives residual focal-plane motion. We then develop a simulation framework combining optical ray tracing, asynchronous guide-star measurements, estimation, and FSM control to study this behavior. The framework is used to compare single-star and multi-star guidance architectures under realistic flight disturbances. For the SuperBIT geometry, we find that multi-star estimation reduces average roll-induced science-field image motion by 31.8%, increasing to 77.4% for a representative geometry of GigaBIT, SuperBIT's planned larger-aperture successor. These results motivate further investigation of multi-star fine-guidance architectures for GigaBIT.

astro-ph.IM↗

arXiv2026

picoMUX: microcontroller based time-domain multiplexing readout for kilopixel TES arrays

Advances in cryogenic SQUID-based time-domain multiplexing (TDM) have outpaced their warm readout electronics. Next generation CMB telescopes are baselining kilopixel TES arrays with few viable electronic options. We present picoMUX, a new TDM readout electronics architecture that replaces the FPGA typically used in such systems with a complement of modern microcontrollers. Designed around the current generation NIST multiplexer, it fully exploits its differential nature and two-level switching. The system achieves the desired timing metrics (sub μs row dwell time) while reducing cost, complexity, and power consumption over a comparable FPGA solution. Preliminary noise measurements are consistent with expectations and show no evidence that the novel architecture introduces excess noise. picoMUX demonstrates how recent advances in microcontrollers enable simpler, low-power, low-cost TDM readouts for kilopixel TES arrays.

astro-ph.IM↗

arXiv2026

Sub-Kelvin Cryogenics for a Super-Pressure Balloon-Borne CMB Polarimeter: Taurus

Taurus is a balloon-borne cosmic microwave background (CMB) experiment designed to operate more than 10,000 transition-edge sensor bolometers at a base temperature near 100 mK during a multi-week stratospheric balloon flight. This platform provides near-space observing conditions while imposing stringent constraints on mass, power, and system robustness, driving the need for a lightweight and highly reliable cryogenic system. To meet these requirements, Taurus employs a multi-stage cryogenic architecture. A 660 L liquid helium tank provides a stable 4 K reservoir, with vapor-cooled shields establishing intermediate stages at approximately 40 K and 80 K. A superfluid helium tank provides an approximately 1.5 K takeoff point for the sub-Kelvin cooling systems. Each of the instrument's three receivers is supported by an independent sub-Kelvin cooling chain that includes closed-cycle 3He sorption refrigerators that cool to 300 mK. These provide the thermal intercept and takeoff for a Chase Research Cryogenics miniature dilution refrigerator that cools the detectors to approximately 100 mK. Here we discuss the requirements and challenges of the Taurus sub-Kelvin cryogenic system and present results of early performance tests.

astro-ph.IM↗

arXiv2024

Thermal architecture for a cryogenic super-pressure balloon payload: design and development of the Taurus flight cryostat

We describe the cryogenic system being developed for Taurus: a super-pressure balloon-borne microwave polarimeter scheduled to fly in 2027. The Taurus cryogenic system consists of a 660L liquid helium cryostat which achieves a base temperature of <100mK with the help of a capillary-fed superfluid tank and a closed cycle dilution refrigerator. The main tank is supported with fiberglass flexures and is encased in two layers of vapor-cooled shields which allow Taurus to make full use of the extended flight time offered by the super-pressure balloon platform. The Taurus cryostat is projected to hold for over 50 days while weighing under 1000lbs. We present the design, testing, and thermal analysis of the Taurus cryogenic systems.

physics.ins-det↗

arXiv2024

Modeling optical systematics for the Taurus CMB experiment

We simulate a variety of optical systematics for Taurus, a balloon-borne cosmic microwave background (CMB) polarisation experiment, to assess their impact on large-scale E-mode polarisation measurements and constraints of the optical depth to reionisation τ. We model a one-month flight of Taurus from Wanaka, New Zealand aboard a super-pressure balloon (SPB). We simulate night-time scans of both the CMB and dust foregrounds in the 150GHz band, one of Taurus's four observing bands. We consider a variety of possible systematics that may affect Taurus's observations, including non-gaussian beams, pointing reconstruction error, and half-wave plate (HWP) non-idealities. For each of these, we evaluate the residual power in the difference between maps simulated with and without the systematic, and compare this to the expected signal level corresponding to Taurus's science goals. Our results indicate that most of the HWP-related systematics can be mitigated to be smaller than sample variance by calibrating with Planck's TT spectrum and using an achromatic HWP model, with a preference for five layers of sapphire to ensure good systematic control. However, additional beam characterization will be required to mitigate far-sidelobe pickup from dust on larger scales.

astro-ph.CO↗

arXiv2024

Instrument Overview of Taurus: A Balloon-borne CMB and Dust Polarization Experiment

Taurus is a balloon-borne cosmic microwave background (CMB) experiment optimized to map the E-mode polarization and Galactic foregrounds at the largest angular scales ($\ell$ $\lt$ 30) and improve measurements of the optical depth to reionization ($τ$). This will pave the way for improved measurements of the sum of neutrino masses in combination with high-resolution CMB data while also testing the $ΛCDM$ model on large angular scales and providing high-frequency maps of polarized dust foregrounds to the CMB community. These measurements take advantage of the low-loading environment found in the stratosphere and are enabled by NASA's super-pressure balloon platform, which provides access to 70% of the sky with a launch from Wanaka, New Zealand. Here we describe a general overview of Taurus, with an emphasis on the instrument design. Taurus will employ more than 10,000 100 mK transition edge sensor bolometers distributed across two low-frequency (150, 220 GHz) and one high-frequency (280, 350 GHz) dichroic receivers. The liquid helium cryostat housing the detectors and optics is supported by a lightweight gondola. The payload is designed to meet the challenges in mass, power, and thermal control posed by the super-pressure platform. The instrument and scan strategy are optimized for rigorous control of instrumental systematics, enabling high-fidelity linear polarization measurements on the largest angular scales.

astro-ph.IM↗

arXiv2021

Evolving Antennas for Ultra-High Energy Neutrino Detection

Evolutionary algorithms are a type of artificial intelligence that utilize principles of evolution to efficiently determine solutions to defined problems. These algorithms are particularly powerful at finding solutions that are too complex to solve with traditional techniques and at improving solutions found with simplified methods. The GENETIS collaboration is developing genetic algorithms to design antennas that are more sensitive to ultra high energy neutrino induced radio pulses than current detectors. Improving antenna sensitivity is critical because UHE neutrinos are rare and require massive detector volumes with stations dispersed over hundreds of km squared. The GENETIS algorithm evolves antenna designs using simulated neutrino sensitivity as a measure of fitness by integrating with XFdtd, a finite difference time domain modeling program, and with simulations of neutrino experiments. The best antennas will then be deployed in ice for initial testing. The genetic algorithm's aim is to create antennas that improve on the designs used in the existing ARA experiment by more than a factor of 2 in neutrino sensitivities. This research could improve antenna sensitivities in future experiments and thus accelerate the discovery of UHE neutrinos. This is the first time that antennas have been designed using genetic algorithms with a fitness score based on a physics outcome, which will motivate the continued use of genetic algorithm designed instrumentation in astrophysics and beyond. This proceeding will report on advancements to the algorithm, steps taken to improve the genetic algorithm performance, the latest results from our evolutions, and the manufacturing road map.

astro-ph.IM↗

arXiv2020

Evolving Antennas for Ultra-High Energy Neutrino Detection

Evolutionary algorithms borrow from biology the concepts of mutation and selection in order to evolve optimized solutions to known problems. The GENETIS collaboration is developing genetic algorithms for designing antennas that are more sensitive to ultra-high energy neutrino induced radio pulses than current designs. There are three aspects of this investigation. The first is to evolve simple wire antennas to test the concept and different algorithms. Second, optimized antenna response patterns are evolved for a given array geometry. Finally, antennas themselves are evolved using neutrino sensitivity as a measure of fitness. This is achieved by integrating the XFdtd finite-difference time-domain modeling program with simulations of neutrino experiments.

astro-ph.IM↗