arXiv subjects

Suresh Sivanandam

Publications and source records attributed to Suresh Sivanandam.

At least 19 recordsLinked to original sources

arXiv2026

A report on the First Technology Demonstration mission of the Little UV Camera (LUVCam1)

Here we report on the status of the first on-orbit technology demonstration of the Little UV Camera (LUVCam1). LUVCam1 is a 0.4U payload aboard the 2U cubesat GRBBeta that was launched in July 2024. The primary objective of the mission was to qualify the GSENSE4040 CMOS sensor and its readout electronics in preparation for the Quick UltraVIolet Kilonova Surveyor (QUVIK; Werner et al. \cite{Werner22, Werner24}) satellite. LUVCam will serve as the primary scientific camera for this mission. We report on the performance of the GSENSE4040FSI sensor used on LUVCam1, beginning with its in-lab characterization followed by an assessment of its on-orbit performance using astronomical observations made by LUVCam1. The camera remains operational two years later and has taken pictures of the Moon and stars that we show here. Through LUVCam1, we demonstrated an approach leveraging new-space to qualify the latest COTS CMOS sensors for astronomy missions.

astro-ph.IM↗

arXiv2026

LUVCam: A high-performance, low-cost, UV/optical camera for the future of astronomy in space

Astronomy-grade cameras with robust performance and heritage in the space environment have long been costly, substantially limiting capacity for space-based astronomy and creating a resource barrier to access. Additionally, ultraviolet observations have historically been limited by the low quantum efficiency of most sensors in this wavelength range. The LUVCam program is designed to address both issues by providing a high-performance, low-cost, UV/optical camera system sufficiently capable to support a wide-array of space-based astronomy missions. LUVCam features a large format, low-noise, large pixel, and high quantum efficiency, commercial-off-the-shelf back(front)-side illuminated CMOS sensor, packaged with custom built readout electronics, firmware, and thermomechanical structure to provide both superlative science capability and precision on-sensor guidance at fast cadence to allow for stable high-resolution imaging. LUVCam is ITAR-free and cheap to fabricate, opening up new opportunities for access to space telescopes. Here we introduce LUVCam, describe its performance characteristics, and the rapid implementation of a technology demonstration for flight. LUVCam, coupled with a small aperture custom-built UV telescope, has been on orbit since July 2024 and has achieved Technology Readiness Level (TRL) 7. LUVCam is manifested for several more near-term orbital missions, including a second technology demonstration CubeSat for launch in 2026, and will provide both focal plane cameras for QUVIK, a two-channel UV transient astronomy mission.

astro-ph.IM↗

arXiv2026

GRBAlpha, VZLUSAT-2 and GRBBeta -- GRB observations with CubeSats

Results from GRBAlpha, VZLUSAT-2 and GRBBeta CubeSats and their on-board gamma-ray detectors for monitoring transients are summarised in this article. GRBAlpha was a 1U CubeSat launched in March 2021 to a 550 km altitude polar orbit carrying a CsI(Tl) scintillator gamma-ray burst (GRB) detector with a sensitive range of approximately 30-900 keV. It successfully operated for over four years until June 2025 when it de-orbited. VZLUSAT-2 was a 3U CubeSat launched in January 2022 to a 535 km altitude polar orbit and de-orbited in November 2025 after almost four years of smooth operation. It carried on board two GRB detectors very similar to the one used on GRBAlpha. Both missions have detected about 360 gamma-ray transients, including over 170 long and short gamma-ray bursts (GRBs), and including the most intense GRB ever recorded GRB 221009A and the second brightest GRB 230307A. The new family member, GRBBeta 2U CubeSat, integrated at Masaryk University, was launched in July 2024 to a 580 km altitude, 62 degree inclination orbit. It has been detecting GRBs since its launch without any trouble. Gamma-ray detectors on these nanosatellites are based on CsI(Tl) scintillator readout by silicon photomultipliers (SiPMs). These missions also provide a unique opportunity to study the radiation damage of SiPMs in the low Earth orbit environment and monitor the radiation belts. We have demonstrated that CubeSats can be used in missions lasting beyond three years and routinely detect GRBs.

astro-ph.HE↗

arXiv2025

Super Resolved Imaging with Adaptive Optics

Astronomical telescopes suffer from a tradeoff between field of view (FoV) and image resolution: increasing the FoV leads to an optical field that is under-sampled by the science camera. This work presents a novel computational imaging approach to overcome this tradeoff by leveraging the existing adaptive optics (AO) systems in modern ground-based telescopes. Our key idea is to use the AO system's deformable mirror to apply a series of learned, precisely controlled distortions to the optical wavefront, producing a sequence of images that exhibit distinct, high-frequency, sub-pixel shifts. These images can then be jointly upsampled to yield the final super-resolved image. Crucially, we show this can be done while simultaneously maintaining the core AO operation--correcting for the unknown and rapidly changing wavefront distortions caused by Earth's atmosphere. To achieve this, we incorporate end-to-end optimization of both the induced mirror distortions and the upsampling algorithm, such that telescope-specific optics and temporal statistics of atmospheric wavefront distortions are accounted for. Our experimental results with a hardware prototype, as well as simulations, demonstrate significant SNR improvements of up to 12 dB over non-AO super-resolution baselines, using only existing telescope optics and no hardware modifications. Moreover, by using a precise bench-top replica of a complete telescope and AO system, we show that our methodology can be readily transferred to an operational telescope. Project webpage: https://www.cs.toronto.edu/~robin/aosr/

astro-ph.IM↗

arXiv2024

Tuning the MAPS Adaptive Secondary Mirror: Actuator Control, PID Tuning, Power Spectra and Failure Diagnosis

The MMT Adaptive optics exoPlanet characterization System (MAPS) is currently in its engineering phase, operating on-sky at the MMT Telescope on Mt. Hopkins in southern Arizona. The MAPS Adaptive Secondary Mirror's actuators are controlled by a closed loop modified PID control law and an open loop feed-forward law, which in combination allows for faster actuator response time. An essential element of achieving the secondary's performance goals involves the process of PID gain tuning. To start, we briefly discuss the design of the MAPS ASM and its actuators. We then describe the actuator positional control system and control law. Next, we discuss a few of the issues that make ASM tuning difficult. We then outline our initial attempts at tuning the actuator controllers and discuss the use of actuator positional power spectra for both tuning and determining the health and failure states of individual actuators. We conclude by presenting the results of our latest round of tuning configuration trials, which have been successful at decreasing mirror latency, increasing operational mirror modes and improving image PSF.

astro-ph.IM↗

arXiv2024

Performance estimation of photonic integrated wavefront corrector for single-mode fiber coupling

Many modern astronomical instruments rely on the optimal coupling of starlight into single-mode fibers (SMFs). For ground-based telescopes, this coupling is limited by atmospheric turbulence. We propose an integrated wavefront corrector based on silicon-on-insulator (SOI) photonics, which samples the aberrated wavefront via a microlens array (MLA). The MLA focuses the sampled wavefront onto an array of grating couplers that inject the beamlets into the single-mode waveguides of the corrector. The beams in each waveguide are then shifted in phase using thermo-optic phase shifters before combining the co-phased beams into one single-mode waveguide. In this work, we analyze the external factors that we anticipate will impact the performance of the corrector. Specifically, we study the effects of the telescope pupil function with obscuration, determine whether the corrector requires tip/tilt pre-correction, and analyze the impact of scintillation on the correction quality.

astro-ph.IM↗

arXiv2024

Experimental demonstration of photonic phase correctors based on grating coupler arrays and thermo-optic shifters

In ground-based astronomy, the ability to couple light into single-mode fibers (SMFs) is limited by atmospheric turbulence, which prohibits the use of many astrophotonic instruments. We propose a silicon-on-insulator photonic chip capable of coherently coupling the out-of-phase beamlets from the subapertures of a telescope pupil into an SMF. The photonic integrated circuit (PIC) consists of an array of grating couplers that are used to inject light from free space into single-mode waveguides on the chip. Metallic heaters modulate the refractive index of a coiled section of the waveguides, facilitating the co-phasing of the propagating modes. The phased beamlets can then be coherently combined to efficiently deliver the light to an output SMF. In an adaptive optics (AO) system, the phase corrector acts as a deformable mirror (DM) commanded by a controller that takes phase measurements from a wavefront sensor (WFS). We present experimental results for the PIC tested on an AO testbed and compare the performance to simulations.

astro-ph.IM↗

arXiv2024

ESCAPE: Efficient Synthesis of Calibrations for Adaptive optics through Pseudo-synthetic and Empirical methods

With the commissioning of the refurbished adaptive secondary mirror (ASM) for the 6.5-meter MMT Observatory under way, special consideration had to be made to properly calibrate the mirror response functions to generate an interaction matrix (IM). The commissioning of the ASM is part of the MMT Adaptive optics exoPlanet characterization System (MAPS) upgrade the observatory's legacy adaptive optics (AO) system. Unlike most AO systems, MAPS employs a convex ASM which prevents the introduction of a calibration source capable of simultaneously illuminating its ASM and wavefront sensor (WFS). This makes calibration of the AO system a significant hurdle in commissioning. To address this, we have employed a hybrid calibration strategy we call the Efficient Synthesis of Calibrations for Adaptive Optics through Pseudo-synthetic and Empirical methods (ESCAPE). ESCAPE combines the DO-CRIME on-sky calibration method with the SPRINT method for computing pseudo-synthetic calibration matrices. To monitor quasi-static system change, the ESCAPE methodology rapidly and continuously generates pseudo-synthetic calibration matrices using continual empirical feedback in either open or closed-loop. In addition, by measuring the current IM in the background while in close-loop, we are also able to measure the optical gains for pyramid wavefront sensor (PyWFS) systems. In this paper, we will provide the mathematical foundation of the ESCAPE calibration strategy and on-sky results from its application in calibrating the MMT Observatory's ASM. Additionally, we will showcase the validation of our approach from our AO testbed and share preliminary on-sky results from MMT.

astro-ph.IM↗

arXiv2024

End-to-end simulations of photonic phase correctors for adaptive optics systems

Optical beams and starlight distorted by atmospheric turbulence can be corrected with adaptive optics systems to enable efficient coupling into single-mode fibers. Deformable mirrors, used to flatten the wavefront in astronomical telescopes, are costly, sensitive, and complex mechanical components that require careful calibration to enable high-quality imaging in astronomy, microscopy, and vision science. They are also impractical to deploy in large numbers for non-imaging applications like free-space optical communication. Here, we propose a photonic integrated c rcuit capable of spatially sampling the wavefront collected by the telescope and co-phasing the subapertures to maximize the flux delivered to an output single-mode fiber as the integrated photonic implementation of a deformable mirror. We present the results of end-to-end simulations to quantify the performance of the proposed photonic solution under varying atmospheric conditions toward realizing an adaptive optics system without a deformable mirror for free-space optical receivers.

physics.optics↗

arXiv2023

The Adaptive Optics System for the Gemini Infrared Multi-Object Spectrograph: Performance Modeling

The Gemini Infrared Multi-Object Spectrograph (GIRMOS) will be a near-infrared, multi-object, medium spectral resolution, integral field spectrograph (IFS) for Gemini North Telescope, designed to operate behind the future Gemini North Adaptive Optics system (GNAO). In addition to a first ground layer Adaptive Optics (AO) correction in closed loop carried out by GNAO, each of the four GIRMOS IFSs will independently perform additional multi-object AO correction in open loop, resulting in an improved image quality that is critical to achieve top level science requirements. We present the baseline parameters and simulated performance of GIRMOS obtained by modeling both the GNAO and GIRMOS AO systems. The image quality requirement for GIRMOS is that 57% of the energy of an unresolved point-spread function ensquared within a 0.1 x 0.1 arcsecond at 2.0 μ m. It was established that GIRMOS will be an order 16 x 16 adaptive optics (AO) system after examining the tradeoffs between performance, risks and costs. The ensquared energy requirement will be met in median atmospheric conditions at Maunakea at 30° from zenith.

astro-ph.IM↗

arXiv2023

The MAPS Adaptive Secondary Mirror: First Light, Laboratory Work, and Achievements

The MMT Adaptive Optics exoPlanet Characterization System (MAPS) is a comprehensive update to the first generation MMT adaptive optics system (MMTAO), designed to produce a facility class suite of instruments whose purpose is to image nearby exoplanets. The system's adaptive secondary mirror (ASM), although comprised in part of legacy components from the MMTAO ASM, represents a major leap forward in engineering, structure and function. The subject of this paper is the design, operation, achievements and technical issues of the MAPS adaptive secondary mirror. We discuss laboratory preparation for on-sky engineering runs, the results of those runs and the issues we discovered, what we learned about those issues in a follow-up period of laboratory work, and the steps we are taking to mitigate them.

astro-ph.IM↗

arXiv2023

HST viewing of spectacular star-forming trails behind ESO 137-001

We present the results from the HST WFC3 and ACS data on an archetypal galaxy undergoing ram pressure stripping (RPS), ESO 137-001, in the nearby cluster Abell 3627. ESO 137-001 is known to host a prominent stripped tail detected in many bands from X-rays, Halpha to CO. The HST data reveal significant features indicative of RPS such as asymmetric dust distribution and surface brightness as well as many blue young star complexes in the tail. We study the correlation between the blue young star complexes from HST, HII regions from Halpha (MUSE) and dense molecular clouds from CO (ALMA). The correlation between the HST blue star clusters and the HII regions is very good, while their correlation with the dense CO clumps are typically not good, presumably due in part to evolutionary effects. In comparison to the Starburst99+Cloudy model, many blue regions are found to be young (< 10 Myr) and the total star formation (SF) rate in the tail is 0.3 - 0.6 M_Sun/yr for sources measured with ages less than 100 Myr, about 40% of the SF rate in the galaxy. We trace SF over at least 100 Myr and give a full picture of the recent SF history in the tail. We also demonstrate the importance of including nebular emissions and a nebular to stellar extinction correction factor when comparing the model to the broadband data. Our work on ESO 137-001 demonstrates the importance of HST data for constraining the SF history in stripped tails.

astro-ph.GA↗

arXiv2023

Extended Line Emission in the BCG of Abell 2390

We report CFHT/SITELLE imaging Fourier Transform Spectrograph observations of the Brightest Cluster Galaxy (BCG) of galaxy cluster Abell 2390 at z=0.228. The BCG displays a prominent cone of emission in H$α$, H$β$, [NII], and [OII] to the North-West with PA = 42$^o$, 4.4 arcsec in length (15.9 kpc), which is associated with elongated and asymmetric Chandra soft X-ray emission. The H$α$ flux map also contains a "hook" of H$α$ and [NII] emission resulting in a broadened northern edge to the cone. Using SITELLE/LUCI software we extract emission line flux, velocity, velocity dispersion, and continuum maps, and utilize them to derive flux ratio maps to determine ionization mechanisms and dynamical information in the BCG's emission line region. The Baldwin-Phillips-Terlevich diagnostics on the BCG cone indicate a composite ionization origin of photoionization due to star formation and shock. Strong LINER-like emission is seen in the nuclear region which hosts an AGN. As Abell 2390 is a cool-core cluster, we suggest that the cooling flow is falling onto the central BCG and interacting with the central AGN. The AGN produces jets that inflate "bubbles" of plasma in the ICM, as is often observed in local galaxy clusters. Furthermore, combining signs of AGN activities from radio, optical emission line and X-ray data over a large range of physical scale, we find evidence for three possible episodes of AGN activity in different epochs associated with the Abell 2390 BCG.

astro-ph.GA↗

arXiv2022

A Near-Infrared Pyramid Wavefront Sensor for the MMT

The MMTO Adaptive optics exoPlanet characterization System (MAPS) is an ongoing upgrade to the 6.5-meter MMT Observatory on Mount Hopkins in Arizona. MAPS includes an upgraded adaptive secondary mirror (ASM), upgrades to the ARIES spectrograph, and a new AO system containing both an optical and near-infrared (NIR; 0.9-1.8 um) pyramid wavefront sensor (PyWFS). The NIR PyWFS will utilize an IR-optimized double pyramid coupled with a SAPHIRA detector: a low-read noise electron Avalanche Photodiode (eAPD) array. This NIR PyWFS will improve MAPS's sky coverage by an order of magnitude by allowing redder guide stars (e.g. K & M-dwarfs or highly obscured stars in the Galactic plane) to be used. To date, the custom designed cryogenic SAPHIRA camera has been fully characterized and can reach sub-electron read noise at high avalanche gain. In order to test the performance of the camera in a closed-loop environment prior to delivery to the observatory, an AO testbed was designed and constructed. In addition to testing the SAPHIRA's performance, the testbed will be used to test and further develop the proposed on-sky calibration procedure for MMTO's ASM. We will report on the anticipated performance improvements from our NIR PyWFS, the SAPHIRA's closed-loop performance on our testbed, and the status of our ASM calibration procedure.

astro-ph.IM↗

arXiv2022

Weak lensing in the blue: a counter-intuitive strategy for stratospheric observations

The statistical power of weak lensing measurements is principally driven by the number of high redshift galaxies whose shapes are resolved. Conventional wisdom and physical intuition suggest this is optimised by deep imaging at long (red or near IR) wavelengths, to avoid losing redshifted Balmer break and Lyman break galaxies. We use the synthetic Emission Line EL-COSMOS catalogue to simulate lensing observations using different filters, from various altitudes. Here were predict the number of exposures to achieve a target z > 0.3 source density, using off-the-shelf and custom filters. Ground-based observations are easily better at red wavelengths, as (more narrowly) are space-based observations. However, we find that SuperBIT, a diffraction-limited observatory operating in the stratosphere, should instead perform its lensing-quality observations at blue wavelengths.

astro-ph.IM↗

arXiv2022

Optical Design and Wavelength Calibration of a DMD-based Multi-Object Spectrograph

The multi-object spectrograph (MOS) has been the benchmark for the current generation of astronomical spectrographs, valued for its ability to acquire the spectra of hundreds of objects simultaneously. In the last two decades, the digital micromirror device (DMD) has shown potential in becoming the central component of the MOS, being used as a programmable slit array. We have designed a seeing-limited DMD-based MOS covering a spectral range of 0.4 to 0.7 $μ$m, with a field of view (FOV) of $10.5^\prime \times 13.98^\prime$ and a spectral resolution of $R\sim1000$. This DMD-MOS employs all-spherical refractive optics, and a volume phase holographic (VPH) grism as the dispersive element for high throughput. In this paper, we present the optical design and optimization process of this DMD-MOS, as well as a preliminary wavelength calibration procedure for hyperspectral data reduction. Using simulated data of the DMD-MOS, a procedure was developed to measure hyperspectral imaging distortion and to construct pixel-to-wavelength mappings on the detector. An investigation into the relationships between DMD micromirrors and detector pixels was conducted. This DMD-MOS will be placed on a 0.5 m diameter telescope as an exploratory study for future DMD-based MOS systems.

astro-ph.IM↗

arXiv2022

Gemini North Adaptive Optics (GNAO) facility overview and status updates

The Gemini North Adaptive Optics (GNAO) facility is the upcoming AO facility for Gemini North providing a state-of-the-art AO system for surveys and time domain science in the era of JWST and Rubin operations. GNAO will be optimized to feed the Gemini infrared Multi Object Spectrograph (GIRMOS). While GIRMOS is the primary science driver for defining the capabilities of GNAO, any instrument operating with an f/32 beam can be deployed using GNAO. The GNAO project includes the development of a new laser guide star facility which will consist of four side-launched laser beams supporting the two primary AO modes of GNAO: a wide-field mode providing an improved image quality over natural seeing for a 2-arcminute circular field-of-view and a narrow-field mode providing near diffraction-limited performance over a 20x20 arcsecond square field-of-view. The GNAO wide field mode will enable GIRMOS's multi-IFU configuration in which the science beam to each individual IFU will be additionally corrected using multi-object AO within GIRMOS. The GNAO narrow field mode will feed the GIRMOS tiled IFU configuration in which all IFUs are combined into a "super"-IFU in the center of the field. GNAO also includes the development of a new Real Time Controller, a new GNAO Facility System Controller and finally the development of a new AO Bench. We present in this paper an overview of the GNAO facility and provide a status update of each product.

astro-ph.IM↗

arXiv2022

Astrophotonic Solutions for Spectral Cross-Correlation Techniques

Using photonic devices, we developed a new approach to traditional spectroscopy where the spectral cross-correlation with a template spectrum can be done entirely on-device. By creating photonic devices with a carefully designed, modulated transmission spectrum, the cross-correlation can be carried out optically without requiring any dispersion, vastly simplifying the instrument and reducing its cost. The measured correlation lag can be used for detecting atomic/molecular species within and determining the radial velocity of a particular astrophysical object. We present an overview of two design approaches that are currently being developed that use different photonic platforms: silicon and fibre-based photonics. The silicon photonic approach utilizes ring resonators that can be thermo-optically modulated to carry out the cross-correlation. The fibre approach uses customized fibre Bragg gratings (FBGs) with transmission spectra that can be strain-modulated. Both approaches have been able to detect molecular gas in a lab setting, and we are now in the process of on-sky testing. Lastly, we discuss the future for these types of devices as their simplicity opens up the possibility of developing low-cost, purpose-built multi-object or integral field spectroscopic instruments that could make significant contributions to scientific programs requiring stellar RV measurements and exoplanet detections.

astro-ph.IM↗