arXiv subjects

Susan F. Redmond

Publications and source records attributed to Susan F. Redmond.

14 recordsLinked to original sources

arXiv2026

Multi-sensor fusion for fine-guidance and milliarcsecond-level attitude estimation of balloon-borne telescope

Balloon-borne telescopes rely on fine-guidance systems to achieve milliarcsecond image stability despite residual disturbances from the balloon environment. In these systems, the Fast Steering Mirror (FSM) stabilizes the image in two focal-plane axes, but leaves systematic, field-dependent residual motion induced by boresight roll. This effect, referred to as roll leakage, becomes more important for wider fields of view. In this work, roll leakage is characterized using data from the 2023 Superpressure Balloon-borne Imaging Telescope (SuperBIT) science flight. SuperBIT is a 0.5-m near-ultraviolet to near-infrared telescope that demonstrated milliarcsecond-level image stability during its 45-night science flight. We find that passive focal-plane star-camera measurements correlate strongly with independent roll measurements across a large set of science exposures, showing that boresight roll frequently drives residual focal-plane motion. We then develop a simulation framework combining optical ray tracing, asynchronous guide-star measurements, estimation, and FSM control to study this behavior. The framework is used to compare single-star and multi-star guidance architectures under realistic flight disturbances. For the SuperBIT geometry, we find that multi-star estimation reduces average roll-induced science-field image motion by 31.8%, increasing to 77.4% for a representative geometry of GigaBIT, SuperBIT's planned larger-aperture successor. These results motivate further investigation of multi-star fine-guidance architectures for GigaBIT.

astro-ph.IM↗

arXiv2026

Enhanced wavefront sensing for the Roman Coronagraph Instrument: Gaussian probes and compact model validation

The Coronagraph Instrument on the Roman Space Telescope will be the first space-based system to demonstrate closed-loop focal-plane wavefront sensing and control, a key step towards the Habitable Worlds Observatory. Beyond the baseline Hybrid Lyot Coronagraph, "enhanced modes" are being developed to improve efficiency and science yield. One such mode uses Gaussian probes for electric field estimation, extending the linear regime and allowing higher probe amplitudes. This may increase signal-to-noise, reduce exposure time, accelerate dark hole convergence, and extend operation to stars as faint as $V\sim5$. For those reasons, it was selected by the Coronagraph Community Participation Program's Hardware Working Group as the first technology demonstration carried out on Roman in early 2027. We present numerical simulations using a noise-free compact software model, which demonstrate the benefits of replacing the nominal probes with Gaussian probes.

astro-ph.IM↗

arXiv2026

CATKit2-HCI: a collaborative framework for advancing high-contrast coronagraph testbeds

High-contrast exoplanet imaging requires dedicated laboratory testbeds for the development and validation of coronagraph architectures, wavefront sensing and control methods, calibration strategies, and system-level observing concepts. These testbeds often share similar software needs, yet many tools are developed independently at each institution. The CATKit2-High-Contrast-Imaging collaboration, or CATKit2-HCI, addresses this gap by providing a shared software framework for reusable HCI infrastructure. Built on top of CATKit2, an open-source hardware control and synchronization framework originally developed for the High-contrast Imager for Complex Aperture Telescopes (HiCAT) testbed at the Space Telescope Science Institute, CATKit2-HCI provides the collaborative layer for HCI-specific algorithms, calibration tools, diagnostics, visualization, and performance metrics. The collaboration currently includes multiple coronagraph testbeds in the United States and Europe. Its goals are to reduce duplicated software development, improve code quality through shared review, enable more direct comparison of results across facilities, and facilitate the movement of students, postdoctoral researchers, and collaborators between laboratories. We describe the motivation, architecture, collaboration model, shared technical capabilities, and early cross-testbed examples of CATKit2-HCI as a framework for accelerating coronagraph technology development.

astro-ph.IM↗

arXiv2026

Impact of segmented deformable mirrors on high-contrast testbeds for exoplanet imaging with future large space telescopes: contrast stability assessment on the HiCAT bench

We investigate the stability of a segmented deformable mirror (DM) on high-contrast testbeds and its impact on the images produced with coronagraphs. Segmented apertures are promising to obtain large primary mirrors for future missions with starlight suppression capabilities. Cophased at the sub-nanometer level, segments can be slightly misaligned by small drifts, proving harmful for exoplanet observations. We study the impact of misalignments on contrast using the High-contrast Imager for Complex Aperture Telescopes (HiCAT), a testbed which includes a 37-segment DM and produces coronagraphic images with 2.5e-8 contrast in narrowband light. Temporal wavefront errors due to the segmented DM are estimated with a Zernike wavefront sensor. Our in-lab results show aberrations at the sub-nanometer level, proving encouraging for contrast stability studies. We then use a digital twin of HiCAT to simulate coronagraphic images with an initial 0.5e-8 contrast and the segments in flat position. By injecting known perturbations on the segments, we observe a contrast degradation by a factor of 2.5, nearly corresponding to the typical contrast observed on HiCAT. These results highlight the importance of segment cophasing sensing and control strategies to ensure the required contrasts for exo-Earth imaging with a large segmented aperture for the Habitable Worlds Observatory mission.

astro-ph.IM↗

arXiv2026

Lensing in the Blue III: Weak Lensing Shape Catalogs of 30 Merging Galaxy Clusters

We present the weak gravitational lensing dataset from the Super-pressure Balloon-Borne Imaging Telescope (SuperBIT), which imaged 30 galaxy clusters during its 45 night flight in April to May 2023. SuperBIT is a first-of-its-kind balloon-borne imaging telescope that achieved near diffraction-limited observations in near-space conditions above 98% of the Earth's atmosphere. We use the metacalibration algorithm to obtain calibrated galaxy shapes for our target clusters and several calibration fields, enabling unbiased reconstruction of the weak-lensing signal. We employ several diagnostics throughout the pipeline, including assessments of point-spread function (PSF) modeling residuals and their impact on weak-lensing measurements, as well as tests for correlations between galaxy shapes and measured galaxy and PSF properties. To assess the multiplicative shear bias of the pipeline, we analyze a parallel set of simulated images that incorporate the real observing conditions from the flight, including measured SuperBIT PSFs, observed sky backgrounds, and detector noise, yielding a bias of $(1.1 \pm 7.8)$~per~cent.

astro-ph.CO↗

arXiv2025

A parameter scan of dark zone maintenance for high-contrast imaging of exoplanets using theoretical and experimental implementations

Maintaining wavefront stability while directly imaging exoplanets over long exposure times is an ongoing problem in the field of high-contrast imaging. Robust and efficient high-order wavefront sensing and control systems are required for maintaining wavefront stability to counteract mechanical and thermal instabilities. Dark zone maintenance (DZM) has been proposed to address quasi-static optical aberrations and maintain high levels of contrast for coronagraphic space telescopes. To further experimentally test this approach for future missions, such as the Habitable Worlds Observatory, this paper quantifies the differences between the theoretical closed-loop contrast bounds and DZM performance on the High-contrast Imager for Complex Aperture Telescopes(HiCAT) testbed. The quantification of DZM is achieved by traversing important parameters of the system, specifically the total direct photon rate entering the aperture of the instrument, ranging from $1.85 \times 10^6$ to $1.85 \times 10^8$ photons per second, and the wavefront error drift rate, ranging from $σ_{drift}$ = 0.3 - 3 $nm/\sqrt{iteration}$, injected via the deformable mirror actuators. This is tested on the HiCAT testbed by injecting random walk drifts using two Boston Micromachines kilo deformable mirrors (DMs). The parameter scan is run on the HiCAT simulator and the HiCAT testbed where the corresponding results are compared to the model-based theoretical contrast bounds to analyze discrepancies. The results indicate an approximate one and a half order of magnitude difference between the theoretical bounds and testbed results.

astro-ph.IM↗

arXiv2024

SuperBIT Superpressure Flight Instrument Overview and Performance: Near diffraction-limited Astronomical Imaging from the Stratosphere

SuperBIT was a 0.5-meter near-ultraviolet to near-infrared wide-field telescope that launched on a NASA superpressure balloon into the stratosphere from New Zealand for a 45-night flight. SuperBIT acquired multi-band images of galaxy clusters to study the properties of dark matter using weak gravitational lensing. We provide an overview of the instrument and its various subsystems. We then present the instrument performance from the flight, including the telescope and image stabilization system, the optical system, the power system, and the thermal system. SuperBIT successfully met the instrument's technical requirements, achieving a telescope pointing stability of 0.34 +/- 0.10 arcseconds, a focal plane image stability of 0.055 +/- 0.027 arcseconds, and a PSF FWHM of ~ 0.35 arcseconds over 5-minute exposures throughout the 45-night flight. The telescope achieved a near-diffraction limited point-spread function in all three science bands (u, b, and g). SuperBIT served as a pathfinder to the GigaBIT observatory, which will be a 1.34-meter near-ultraviolet to near-infrared balloon-borne telescope.

astro-ph.IM↗

arXiv2024

Comparative laboratory study of electric field conjugation algorithms

Future space telescope coronagraph instruments hinge on the integration of high-performance masks and precise wavefront sensing and control techniques to create dark holes essential for exoplanet detection. Recent advancements in wavefront control algorithms might exhibit differing performance depending on the coronagraph used. This research investigates three model-free and model-based algorithms in conjunction with either a vector vortex coronagraph or a scalar vortex coronagraph under identical laboratory conditions: pairwise probing with electric field conjugation, the self-coherent camera with electric field conjugation, and implicit electric field conjugation. We present experimental results in narrowband and broadband light from the In-Air Coronagraph Testbed at the Jet Propulsion Laboratory. We find that model-free dark hole digging methods achieve comparable broadband contrasts to model-based methods, and highlight the calibration costs of model-free methods compared to model-based approaches. This study also reports the first time that electric field conjugation with the self-coherent camera has been applied for simultaneous multi-subband correction with a field stop. This study compares the advantages and disadvantages of each of these wavefront sensing and control algorithms with respect to their potential for future space telescopes.

astro-ph.IM↗

arXiv2024

From SuperBIT to GigaBIT: Informing next-generation balloon-borne telescope design with Fine Guidance System flight data

The Super-pressure Balloon-borne Imaging Telescope (SuperBIT) is a near-diffraction-limited 0.5m telescope that launched via NASA's super-pressure balloon technology on April 16, 2023. SuperBIT achieved precise pointing control through the use of three nested frames in conjunction with an optical Fine Guidance System (FGS), resulting in an average image stability of 0.055" over 300-second exposures. The SuperBIT FGS includes a tip-tilt fast-steering mirror that corrects for jitter on a pair of focal plane star cameras. In this paper, we leverage the empirical data from SuperBIT's successful 45-night stratospheric mission to inform the FGS design for the next-generation balloon-borne telescope. The Gigapixel Balloon-borne Imaging Telescope (GigaBIT) is designed to be a 1.35m wide-field, high resolution imaging telescope, with specifications to extend the scale and capabilities beyond those of its predecessor SuperBIT. A description and analysis of the SuperBIT FGS will be presented along with methodologies for extrapolating this data to enhance GigaBIT's FGS design and fine pointing control algorithm. We employ a systems engineering approach to outline and formalize the design constraints and specifications for GigaBIT's FGS. GigaBIT, building on the SuperBIT legacy, is set to enhance high-resolution astronomical imaging, marking a significant advancement in the field of balloon-borne telescopes.

astro-ph.IM↗

arXiv2023

Data downloaded via parachute from a NASA super-pressure balloon

In April to May 2023, the superBIT telescope was lifted to the Earth's stratosphere by a helium-filled super-pressure balloon, to acquire astronomical imaging from above (99.5% of) the Earth's atmosphere. It was launched from New Zealand then, for 40 days, circumnavigated the globe five times at a latitude 40 to 50 degrees South. Attached to the telescope were four 'DRS' (Data Recovery System) capsules containing 5 TB solid state data storage, plus a GNSS receiver, Iridium transmitter, and parachute. Data from the telescope were copied to these, and two were dropped over Argentina. They drifted 61 km horizontally while they descended 32 km, but we predicted their descent vectors within 2.4 km: in this location, the discrepancy appears irreducible below 2 km because of high speed, gusty winds and local topography. The capsules then reported their own locations to within a few metres. We recovered the capsules and successfully retrieved all of superBIT's data - despite the telescope itself being later destroyed on landing.

astro-ph.IM↗

arXiv2023

Lensing in the Blue II: Estimating the Sensitivity of Stratospheric Balloons to Weak Gravitational Lensing

The Superpressure Balloon-borne Imaging Telescope (SuperBIT) is a diffraction-limited, wide-field, 0.5 m, near-infrared to near-ultraviolet observatory designed to exploit the stratosphere's space-like conditions. SuperBIT's 2023 science flight will deliver deep, blue imaging of galaxy clusters for gravitational lensing analysis. In preparation, we have developed a weak lensing measurement pipeline with modern algorithms for PSF characterization, shape measurement, and shear calibration. We validate our pipeline and forecast SuperBIT survey properties with simulated galaxy cluster observations in SuperBIT's near-UV and blue bandpasses. We predict imaging depth, galaxy number (source) density, and redshift distribution for observations in SuperBIT's three bluest filters; the effect of lensing sample selections is also considered. We find that in three hours of on-sky integration, SuperBIT can attain a depth of b = 26 mag and a total source density exceeding 40 galaxies per square arcminute. Even with the application of lensing-analysis catalog selections, we find b-band source densities between 25 and 30 galaxies per square arcminute with a median redshift of z = 1.1. Our analysis confirms SuperBIT's capability for weak gravitational lensing measurements in the blue.

astro-ph.IM↗

arXiv2022

Weak lensing in the blue: a counter-intuitive strategy for stratospheric observations

The statistical power of weak lensing measurements is principally driven by the number of high redshift galaxies whose shapes are resolved. Conventional wisdom and physical intuition suggest this is optimised by deep imaging at long (red or near IR) wavelengths, to avoid losing redshifted Balmer break and Lyman break galaxies. We use the synthetic Emission Line EL-COSMOS catalogue to simulate lensing observations using different filters, from various altitudes. Here were predict the number of exposures to achieve a target z > 0.3 source density, using off-the-shelf and custom filters. Ground-based observations are easily better at red wavelengths, as (more narrowly) are space-based observations. However, we find that SuperBIT, a diffraction-limited observatory operating in the stratosphere, should instead perform its lensing-quality observations at blue wavelengths.

astro-ph.IM↗

arXiv2021

Implementation of a broadband focal plane estimator for high-contrast dark zones

The characterization of exoplanet atmospheres using direct imaging spectroscopy requires high-contrast over a wide wavelength range. We study a recently proposed focal plane wavefront estimation algorithm that exclusively uses broadband images to estimate the electric field. This approach therefore reduces the complexity and observational overheads compared to traditional single wavelength approaches. The electric field is estimated as an incoherent sum of monochromatic intensities with the pair-wise probing technique. This paper covers the detailed implementation of the algorithm and an application to the High-contrast Imager for Complex Aperture Telescopes (HiCAT) testbed with the goal to compare the performance between the broadband and traditional narrowband filter approaches.

astro-ph.IM↗

arXiv2021

Dark zone maintenance results for segmented aperture wavefront error drift in a high contrast space coronagraph

Due to the limited number of photons, directly imaging planets requires long integration times with a coronagraphic instrument. The wavefront must be stable on the same time scale, which is often difficult in space due to thermal variations and other mechanical instabilities. In this paper, we discuss the implications on future space mission observing conditions of our recent laboratory demonstration of a dark zone maintenance (DZM) algorithm. The experiments are performed on the High-contrast imager for Complex Aperture Telescopes (HiCAT) at the Space Telescope Science Institute (STScI). The testbed contains a segmented aperture, a pair of continuous deformable mirrors (DMs), and a lyot coronagraph. The segmented aperture injects high order wavefront aberration drifts into the system which are then corrected by the DMs downstream via the DZM algorithm. We investigate various drift modes including segmented aperture drift, all three DMs drift simultaneously, and drift correction at multiple wavelengths.

astro-ph.IM↗