Searcharxiv⌕ Search

arXiv subjects

Sven Herrmann

Publications and source records attributed to Sven Herrmann.

At least 37 records · Page 2Linked to original sources
arXiv2024

Continued developments in X-ray speed reading: fast, low noise readout for next-generation wide-field imagers

Future strategic X-ray astronomy missions will require unprecedentedly sensitive wide-field imagers providing high frame rates, low readout noise and excellent soft energy response. To meet these needs, our team is employing a multi-pronged approach to advance several key areas of technology. Our first focus is on advanced readout electronics, specifically integrated electronics, where we are collaborating on the VERITAS readout chip for the Athena Wide Field Imager, and have developed the Multi-Channel Readout Chip (MCRC), which enables fast readout and high frame rates for MIT-LL JFET (junction field effect transistor) CCDs. Second, we are contributing to novel detector development, specifically the SiSeRO (Single electron Sensitive Read Out) devices fabricated at MIT Lincoln Laboratory, and their advanced readout, to achieve sub-electron noise performance. Hardware components set the stage for performance, but their efficient utilization relies on software and algorithms for signal and event processing. Our group is developing digital waveform filtering and AI methods to augment detector performance, including enhanced particle background screening and improved event characterization. All of these efforts make use of an efficient, new X-ray beamline facility at Stanford, where components and concepts can be tested and characterized.

astro-ph.IM↗
arXiv2024

Demonstrating sub-electron noise performance in Single electron Sensitive Readout (SiSeRO) devices

Single electron Sensitive Read Out (SiSeRO) is a novel on-chip charge detection technology that can, in principle, provide significantly greater responsivity and improved noise performance than traditional charge coupled device (CCD) readout circuitry. The SiSeRO, developed by MIT Lincoln Laboratory, uses a p-MOSFET transistor with a depleted back-gate region under the transistor channel; as charge is transferred into the back gate region, the transistor current is modulated. With our first generation SiSeRO devices, we previously achieved a responsivity of around 800 pA per electron, an equivalent noise charge (ENC) of 4.5 electrons root mean square (RMS), and a full width at half maximum (FWHM) spectral resolution of 130 eV at 5.9 keV, at a readout speed of 625 Kpixel/s and for a detector temperature of 250 K. Importantly, since the charge signal remains unaffected by the SiSeRO readout process, we have also been able to implement Repetitive Non-Destructive Readout (RNDR), achieving an improved ENC performance. In this paper, we demonstrate sub-electron noise sensitivity with these devices, utilizing an enhanced test setup optimized for RNDR measurements, with excellent temperature control, improved readout circuitry, and advanced digital filtering techniques. We are currently fabricating new SiSeRO detectors with more sensitive and RNDR-optimized amplifier designs, which will help mature the SiSeRO technology in the future and eventually lead to the pathway to develop active pixel sensor (APS) arrays using sensitive SiSeRO amplifiers on each pixel. Active pixel devices with sub-electron sensitivity and fast readout present an exciting option for next generation, large area astronomical X-ray telescopes requiring fast, low-noise megapixel imagers.

astro-ph.IM↗
arXiv2024

X-ray speed reading with the MCRC: prototype success and next generation upgrades

The Advanced X-ray Imaging Satellite (AXIS) is a NASA probe class mission concept designed to deliver arcsecond resolution with an effective area ten times that of Chandra (at launch). The AXIS focal plane features an MIT Lincoln Laboratory (MIT-LL) X-ray charge-coupled device (CCD) detector working in conjunction with an application specific integrated circuit (ASIC), denoted the Multi-Channel Readout Chip (MCRC). While this readout ASIC targets the AXIS mission, it is applicable to a range of potential X-ray missions with comparable readout requirements. Designed by the X-ray astronomy and Observational Cosmology (XOC) group at Stanford University, the MCRC ASIC prototype (MCRC-V1.0) uses a 350 nm technology node and provides 8 channels of high speed, low noise, low power consumption readout electronics. Each channel implements a current source to bias the detector output driver, a preamplifier to provide gain, and an output buffer to interface directly to an analog-to-digital (ADC) converter. The MCRC-V1 ASIC exhibits comparable performance to our best discrete electronics implementations, but with ten times less power consumption and a fraction of the footprint area. In a total ionizing dose (TID) test, the chip demonstrated a radiation hardness equal or greater to 25 krad, confirming the suitability of the process technology and layout techniques used in its design. The next iteration of the ASIC (MCRC-V2) will expand the channel count and extend the interfaces to external circuits, advancing its readiness as a readout-on-a-chip solution for next generation X-ray CCD-like detectors. This paper summarizes our most recent characterization efforts, including the TID radiation campaign and results from the first operation of the MCRC ASIC in combination with a representative MIT-LL CCD.

astro-ph.IM↗
arXiv2024

Towards efficient machine-learning-based reduction of the cosmic-ray induced background in X-ray imaging detectors: increasing context awareness

Traditional cosmic ray filtering algorithms used in X-ray imaging detectors aboard space telescopes perform event reconstruction based on the properties of activated pixels above a certain energy threshold, within 3x3 or 5x5 pixel sliding windows. This approach can reject up to 98% of the cosmic ray background. However, the remaining unrejected background constitutes a significant impediment to studies of low surface brightness objects, which are especially prevalent in the high-redshift universe. The main limitation of the traditional filtering algorithms is their ignorance of the long-range contextual information present in image frames. This becomes particularly problematic when analyzing signals created by secondary particles produced during interactions of cosmic rays with body of the detector. Such signals may look identical to the energy deposition left by X-ray photons, when one considers only the properties within the small sliding window. Additional information is present, however, in the spatial and energy correlations between signals in different parts of the frame, which can be accessed by modern machine learning (ML) techniques. In this work, we continue the development of an ML-based pipeline for cosmic ray background mitigation. Our latest method consist of two stages: first, a frame classification neural network is used to create class activation maps (CAM), localizing all events within the frame; second, after event reconstruction, a random forest classifier, using features obtained from CAMs, is used to separate X-ray and cosmic ray features. The method delivers >40% relative improvement over traditional filtering in background rejection in standard 0.3-10keV energy range, at the expense of only a small (<2%) level of lost X-ray signal. Our method also provides a convenient way to tune the cosmic ray rejection threshold to adapt to a user's specific scientific needs.

astro-ph.IM↗
arXiv2024

LuSEE-Night power requirements and power generation strategy

The Lunar Surface Electromagnetics Experiment at Night (LuSEE-Night) is a project designed to investigate the feasibility of observing the Cosmic Dark Ages using an instrument on the lunar far-side. LuSEE-Night will measure the redshifted 21 cm transition of neutral hydrogen over a frequency range of 0.1-50 MHz, covering the redshift range 27 < z < 1100. The LuSEE-Night instrument is a radio frequency spectrometer, consisting of four horizontal monopole antennas, arranged to give wide zenith-pointing beams with two orthogonal linear polarizations. This combination of polarization, spectral, and angular sensitivity will be necessary to separate the cosmological signal from significantly stronger foreground emissions. LuSEE-Night will observe in drift scan during lunar night while the moon shields it from radio frequency interference from both the Earth and sun, and will transmit science and telemetry data back to Earth via an orbital relay during the lunar day. LuSEE-Night will have to operate in a challenging environment: its electronics must operate under hard radiation, the instrument must be thermally isolated during the cold 100~K lunar night, and have a thermal rejection path to survive the 390~K daytime temperature, and its photovoltaic and battery systems must provide sufficient power to operate during two weeks of lunar night. Furthermore, the instrument spectrometer must be powered throughout the lunar night using only a 7~kWh battery, due to mass limitations. Here we describe the power generation, storage, and delivery subsystems of the LuSEE-Night instrument, and the simulations which were performed to design the power subsystems and ensure instrument survival and operation throughout the long lunar night. We also describe the Concept of Operations (ConOps) developed for the LuSEE-Night mission, which derives from the power management simulations.

astro-ph.IM↗
arXiv2024

Results from the CsI Calorimeter onboard the 2023 ComPair Balloon Flight

The ComPair gamma-ray telescope is a technology demonstrator for a future gamma-ray telescope called the All-sky Medium Energy Gamma-ray Observatory (AMEGO). The instrument is composed of four subsystems, a double-sided silicon strip detector, a virtual Frisch grid CdZnTe calorimeter, a CsI:Tl based calorimeter, and an anti-coincidence detector (ACD). The CsI calorimeter's goal is to measure the position and energy deposited from high-energy events. To demonstrate the technological readiness, the calorimeter has flown onboard a NASA scientific balloon as part of the GRAPE-ComPair mission and accumulated around 3 hours of float time at an altitude of 40 km. During the flight, the CsI calorimeter observed background radiation, Regener-Pfotzer Maximum, and several gamma-ray activation lines originating from aluminum.

astro-ph.IM↗
arXiv2023

Demonstrating repetitive non-destructive readout (RNDR) with SiSeRO devices

We demonstrate so-called repetitive non-destructive readout (RNDR) for the first time on a Single electron Sensitive Readout (SiSeRO) device. SiSeRO is a novel on-chip charge detector output stage for charge-coupled device (CCD) image sensors, developed at MIT Lincoln Laboratory. This technology uses a p-MOSFET transistor with a depleted internal gate beneath the transistor channel. The transistor source-drain current is modulated by the transfer of charge into the internal gate. RNDR was realized by transferring the signal charge non-destructively between the internal gate and the summing well (SW), which is the last serial register. The advantage of the non-destructive charge transfer is that the signal charge for each pixel can be measured at the end of each transfer cycle and by averaging for a large number of measurements ($\mathrm{N_{cycle}}$), the total noise can be reduced by a factor of 1/$\mathrm{\sqrt{N_{cycle}}}$. In our experiments with a prototype SiSeRO device, we implemented nine ($\mathrm{N_{cycle}}$ = 9) RNDR cycles, achieving around 2 electron readout noise (equivalent noise charge or ENC) with spectral resolution close to the fano limit for silicon at 5.9 keV. These first results are extremely encouraging, demonstrating successful implementation of the RNDR technique in SiSeROs. They also lay foundation for future experiments with more optimized test stands (better temperature control, larger number of RNDR cycles, RNDR-optimized SiSeRO devices) which should be capable of achieving sub-electron noise sensitivities. This new device class presents an exciting technology for next generation astronomical X-ray telescopes requiring very low-noise spectroscopic imagers. The sub-electron sensitivity also adds the capability to conduct in-situ absolute calibration, enabling unprecedented characterization of the low energy instrument response.

astro-ph.IM↗
arXiv2023

Gravitomagnetic Clock Effect: Using GALILEO to explore General Relativity

All experiments to date are in remarkable agreement with the predictions of Einstein's theory of gravity, General Relativity. Besides the classical tests, involving light deflection, orbit precession, signal delay, and the gravitational redshift, modern technology has pushed the limits even further. Gravitational waves have been observed multiple times as have been black holes, arguably amongst the most fascinating objects populating our universe. Moreover, geodetic satellite missions have enabled the verification of yet another prediction: gravitomagnetism. This phenomenon arises due to the rotation of a central body, e.g., the Earth, which is dragging spacetime along. One resulting effect on satellite orbits is the observed Lense-Thirring effect. Another predicted, yet unverified, effect is the so-called gravitomagnetic clock effect, which was first described by Cohen and Mashhoon as the proper time difference of two counter-revolving clocks in an orbit around a rotating mass. A theoretical framework is introduced that describes a gravitomagnetic clock effect based on a stationary spacetime model. An incremental definition of a suitable observable follows, which can be accessed via orbit data obtained from the European satellite navigation system Galileo, and an implementation of the framework for use with real satellite and clock data is presented. The technical requirements on a satellite mission are studied to measure the gravitomagnetic clock effect at the state-of-the-art in satellite laser ranging and modelling of gravitational and non-gravitational perturbations. Based on the analysis within this work, a measurement of the gravitomagnetic clock effect is highly demanding, but might just be within reach in the very near future based on current and upcoming technology.

gr-qc↗
arXiv2023

Overview of the Advanced X-ray Imaging Satellite (AXIS)

The Advanced X-ray Imaging Satellite (AXIS) is a Probe-class concept that will build on the legacy of the Chandra X-ray Observatory by providing low-background, arcsecond-resolution imaging in the 0.3-10 keV band across a 450 arcminute$^2$ field of view, with an order of magnitude improvement in sensitivity. AXIS utilizes breakthroughs in the construction of lightweight segmented X-ray optics using single-crystal silicon, and developments in the fabrication of large-format, small-pixel, high readout rate CCD detectors with good spectral resolution, allowing a robust and cost-effective design. Further, AXIS will be responsive to target-of-opportunity alerts and, with onboard transient detection, will be a powerful facility for studying the time-varying X-ray universe, following on from the legacy of the Neil Gehrels (Swift) X-ray observatory that revolutionized studies of the transient X-ray Universe. In this paper, we present an overview of AXIS, highlighting the prime science objectives driving the AXIS concept and how the observatory design will achieve these objectives.

astro-ph.IM↗
arXiv2023

The high-speed X-ray camera on AXIS

AXIS is a Probe-class mission concept that will provide high-throughput, high-spatial-resolution X-ray spectral imaging, enabling transformative studies of high-energy astrophysical phenomena. To take advantage of the advanced optics and avoid photon pile-up, the AXIS focal plane requires detectors with readout rates at least 20 times faster than previous soft X-ray imaging spectrometers flying aboard missions such as Chandra and Suzaku, while retaining the low noise, excellent spectral performance, and low power requirements of those instruments. We present the design of the AXIS high-speed X-ray camera, which baselines large-format MIT Lincoln Laboratory CCDs employing low-noise pJFET output amplifiers and a single-layer polysilicon gate structure that allows fast, low-power clocking. These detectors are combined with an integrated high-speed, low-noise ASIC readout chip from Stanford University that provides better performance than conventional discrete solutions at a fraction of their power consumption and footprint. Our complementary front-end electronics concept employs state of the art digital video waveform capture and advanced signal processing to deliver low noise at high speed. We review the current performance of this technology, highlighting recent improvements on prototype devices that achieve excellent noise characteristics at the required readout rate. We present measurements of the CCD spectral response across the AXIS energy band, augmenting lab measurements with detector simulations that help us understand sources of charge loss and evaluate the quality of the CCD backside passivation technique. We show that our technology is on a path that will meet our requirements and enable AXIS to achieve world-class science.

astro-ph.IM↗
arXiv2023

The Compton-Pair telescope: A prototype for a next-generation MeV $γ$-ray observatory

The Compton Pair (ComPair) telescope is a prototype that aims to develop the necessary technologies for future medium energy gamma-ray missions and to design, build, and test the prototype in a gamma-ray beam and balloon flight. The ComPair team has built an instrument that consists of 4 detector subsystems: a double-sided silicon strip detector Tracker, a novel high-resolution virtual Frisch-grid cadmium zinc telluride Calorimeter, and a high-energy hodoscopic cesium iodide Calorimeter, all of which are surrounded by a plastic scintillator anti-coincidence detector. These subsystems together detect and characterize photons via Compton scattering and pair production, enable a veto of cosmic rays, and are a proof-of-concept for a space telescope with the same architecture. A future medium-energy gamma-ray mission enabled through ComPair will address many questions posed in the Astro2020 Decadal survey in both the New Messengers and New Physics and the Cosmic Ecosystems themes. In this contribution, we will give an overview of the ComPair project and steps forward to the balloon flight.

astro-ph.IM↗
arXiv2023

Improved noise performance from the next-generation buried-channel p-Mosfet SiSeROs

The Single electron Sensitive Read Out (SiSeRO) is a novel on-chip charge detector output stage for charge-coupled device (CCD) image sensors. Developed at MIT Lincoln Laboratory, this technology uses a p-MOSFET transistor with a depleted internal gate beneath the transistor channel. The transistor source-drain current is modulated by the transfer of charge into the internal gate. At Stanford, we have developed a readout module based on the drain current of the on-chip transistor to characterize the device. In our earlier work, we characterized a number of first prototype SiSeROs with the MOSFET transistor channels at the surface layer. An equivalent noise charge (ENC) of around 15 electrons root mean square (RMS) was obtained. In this work, we examine the first buried-channel SiSeRO. We have achieved substantially improved noise performance of around 4.5 electrons root mean square (RMS) and a full width half maximum (FWHM) energy resolution of 132 eV at 5.9 keV, for a readout speed of 625 kpixel/s. We also discuss how digital filtering techniques can be used to further improve the SiSeRO noise performance. Additional measurements and device simulations will be essential to further mature the SiSeRO technology. This new device class presents an exciting new technology for the next-generation astronomical X-ray telescopes requiring fast, low-noise, radiation-hard megapixel imagers with moderate spectroscopic resolution.

astro-ph.IM↗
arXiv2022

Single electron Sensitive Readout (SiSeRO) X-ray detectors: Technological progress and characterization

Single electron Sensitive Read Out (SiSeRO) is a novel on-chip charge detector output stage for charge-coupled device (CCD) image sensors. Developed at MIT Lincoln Laboratory, this technology uses a p-MOSFET transistor with a depleted internal gate beneath the transistor channel. The transistor source-drain current is modulated by the transfer of charge into the internal gate. At Stanford, we have developed a readout module based on the drain current of the on-chip transistor to characterize the device. Characterization was performed for a number of prototype sensors with different device architectures, e.g. location of the internal gate, MOSFET polysilicon gate structure, and location of the trough in the internal gate with respect to the source and drain of the MOSFET (the trough is introduced to confine the charge in the internal gate). Using a buried-channel SiSeRO, we have achieved a charge/current conversion gain of >700 pA per electron, an equivalent noise charge (ENC) of around 6 electrons root mean square (RMS), and a full width half maximum (FWHM) of approximately 140 eV at 5.9 keV at a readout speed of 625 Kpixel/s. In this paper, we discuss the SiSeRO working principle, the readout module developed at Stanford, and the characterization test results of the SiSeRO prototypes. We also discuss the potential to implement Repetitive Non-Destructive Readout (RNDR) with these devices and the preliminary results which can in principle yield sub-electron ENC performance. Additional measurements and detailed device simulations will be essential to mature the SiSeRO technology. However, this new device class presents an exciting technology for next generation astronomical X-ray telescopes requiring fast, low-noise, radiation hard megapixel imagers with moderate spectroscopic resolution.

astro-ph.IM↗
arXiv2022

Exploring the MeV Sky with a Combined Coded Mask and Compton Telescope: The Galactic Explorer with a Coded Aperture Mask Compton Telescope (GECCO)

The sky at MeV energies is currently poorly explored. Here we present an innovative mission concept that builds on and improves past and currently proposed missions at such energies. We outline the motivations for combining a coded mask and a Compton telescope and we define the scientific goals of such a mission. The Galactic Explorer with a Coded Aperture Mask Compton Telescope (GECCO) is a novel concept for a next-generation telescope covering hard X-ray and soft gamma-ray energies. The potential and importance of this approach that bridges the observational gap in the MeV energy range are presented. With the unprecedented angular resolution of the coded mask telescope combined with the sensitive Compton telescope, a mission such as GECCO can disentangle the discrete sources from the truly diffuse emission. Individual Galactic and extragalactic sources are detected. This also allows to understand the gamma-ray Galactic center excess and the Fermi Bubbles, and to trace the low-energy cosmic rays, and their propagation in the Galaxy. Nuclear and annihilation lines are spatially and spectrally resolved from the continuum emission and from sources, addressing the role of low-energy cosmic rays in star formation and galaxy evolution, the origin of the 511 keV positron line, fundamental physics, and the chemical enrichment in the Galaxy. Such an instrument also detects explosive transient gamma-ray sources, which enable identifying and studying the astrophysical objects that produce gravitational waves and neutrinos in a multi-messenger context. By looking at a poorly explored energy band it also allows discoveries of new astrophysical phenomena.

astro-ph.HE↗
arXiv2022

MAQRO -- BPS 2023 Research Campaign Whitepaper

The objective of the proposed MAQRO mission is to harness space for achieving long free-fall times, extreme vacuum, nano-gravity, and cryogenic temperatures to test the foundations of physics in macroscopic quantum experiments. This will result in the development of novel quantum sensors and a means to probe the foundations of quantum physics at the interface with gravity. Earlier studies showed that the proposal is feasible but that several critical challenges remain, and key technologies need to be developed. These new technologies will open up the potential for achieving additional science objectives. The proposed research campaign aims to advance the state of the art and to perform the first macroscopic quantum experiments in space. Experiments on the ground, in micro-gravity, and in space will drive the proposed research campaign during the current decade to enable the implementation of MAQRO within the subsequent decade.

quant-ph↗
arXiv2022

Development and characterization of a fast and low noise readout for the next generation X-ray CCDs

The broad energy response, low electronic read noise, and good energy resolution have made X-ray Charge-Coupled Devices (CCDs) an obvious choice for developing soft X-ray astronomical instruments over the last half century. They also come in large array formats with small pixel sizes which make them a potential candidate for the next generation astronomical X-ray missions. However, the next generation X-ray telescopic experiments propose for significantly larger collecting area compared to the existing observatories in order to explore the low luminosity and high redshift X-ray universe which requires these detectors to have an order of magnitude faster readout. In this context, the Stanford University (SU) in collaboration with the Massachusetts Institute of Technology (MIT) has initiated the development of fast readout electronics for X-ray CCDs. At SU, we have designed and developed a fast and low noise readout module with the goal of achieving a readout speed of 5 Mpixel/s. We successfully ran a prototype CCD matrix of 512 $\times$ 512 pixels at 4 Mpixels/s. In this paper, we describe the details of the readout electronics and report the performance of the detectors at these readout speeds in terms of read noise and energy resolution. In the future, we plan to continue to improve performance of the readout module and eventually converge to a dedicated ASIC based readout system to enable parallel read out of large array multi-node CCD devices.

astro-ph.IM↗
arXiv2021

First results on SiSeRO (Single electron Sensitive Read Out) devices -- a new X-ray detector for scientific instrumentation

We present an evaluation of a novel on-chip charge detector, called the Single electron Sensitive Read Out (SiSeRO), for charge-coupled device (CCD) image sensor applications. It uses a p-MOSFET transistor at the output stage with a depleted internal gate beneath the p-MOSFET. Charge transferred to the internal gate modulates the source-drain current of the transistor. We have developed a drain current readout module to characterize the detector. The prototype sensor achieves a charge/current conversion gain of 700 pA per electron, an equivalent noise charge (ENC) of 15 electrons (e-) root mean square (RMS), and a full width half maximum (FWHM) of 230 eV at 5.9 keV. In this paper, we discuss the SiSeRO working principle, the readout module developed at Stanford, and the first characterization test results of the SiSeRO prototypes. While at present only a proof-of-concept experiment, in the near future we plan to use next generation sensors with improved noise performance and an enhanced readout module. In particular, we are developing a readout module enabling Repetitive Non-Destructive Readout (RNDR) of the charge, which can in principle yield sub-electron ENC performance. With these developments, we eventually plan to build a matrix of SiSeRO amplifiers to develop an active pixel sensor with an on-chip ASIC-based readout system. Such a system, with fast readout speeds and sub-electron noise, could be effectively utilized in scientific applications requiring fast and low-noise spectro-imagers.

astro-ph.IM↗
arXiv2020

Tiny-box: A tool for the versatile development and characterization of low noise fast X-ray imaging detectors

X-ray Charge Coupled Devices (CCDs) have been the workhorse for soft X-ray astronomical instruments for the past quarter century. They provide broad energy response, extremely low electronic read noise, and good energy resolution in soft X-rays. These properties, along with the large arrays and small pixel sizes available with modern-day CCDs, make them a potential candidate for next generation astronomical X-ray missions equipped with large collecting areas, high angular resolutions and wide fields of view, enabling observation of the faint, diffuse and high redshift X-ray universe. However, such high collecting area (about 30 times Chandra) requires these detectors to have an order of magnitude faster readout than current CCDs to avoid saturation and pile up effects. In this context, Stanford University and MIT have initiated the development of fast readout X-ray cameras. As a tool for this development, we have designed a fast readout, low noise electronics board (intended to work at a 5 Megapixel per second data rate) coupled with an STA Archon controller to readout a 512 x 512 CCD (from MIT Lincoln Laboratory). This versatile setup allows us to study a number of parameters and operation conditions including the option for digital shaping. In this paper, we describe the characterization test stand, the concept and development of the readout electronics, and simulation results. We also report the first measurements of read noise, energy resolution and other parameters from this set up. While this is very much a prototype, we plan to use larger, multi-node CCD devices in the future with dedicated ASIC readout systems to enable faster, parallel readout of the CCDs.

astro-ph.IM↗