arXiv subjects

Swayamtrupta Panda

Publications and source records attributed to Swayamtrupta Panda.

115 records · Page 7Linked to original sources

arXiv2018

Interpretation of Departure from the Broad Line Region Scaling in Active Galactic Nuclei

Most results of the reverberation monitoring of active galaxies showed a universal scaling of the time delay of the Hbeta emission region with the monochromatic flux at 5100 A, with very small dipersion. Such a scaling favored the dust-based formation mechanism of the Broad Line Region (BLR). Recent reverberation measurements showed that actually a significant fraction of objects exhibits horter lags than the previously found scaling. Here we demonstrate that these shorter lags can be explained by the old concept of scaling of the BLR size with the ionization parameter. Assuming a universal value of this parameter and universal value of the cloud density reproduces the distribution of observational points in the time delay vs. monochromatic flux plane, provided that a range of black hole spins is allowed. However, a confirmation of the new measurements for low/moderate Eddington ratio sources is strongly needed before the dust-based origin of the BLR can be excluded.

astro-ph.GA↗

arXiv2018

Modelling of the quasar main sequence in the optical plane

The concept of the quasar main sequence is very attractive since it stresses correlations between various parameters and implies the underlying simplicity. In the optical plane defined by the width of the H\{beta} line and the ratio of the equivalent width of the Fe II to H\{beta} observed objects form a characteristic pattern. In this paper, we use a physically motivated model to explain the distribution of quasars in the optical plane. Continuum is modelled as an accretion disk with a hard X-ray power law uniquely tight to the disk at the basis of observational scaling, and the Broad Line Region distance is determined also from observational scaling. We perform the computations of the FeII and H\{beta} line production with the code CLOUDY. We have only six free parameters for an individual source: maximum temperature of the accretion disk, Eddington ratio, cloud density, cloud column density, microturbulence, and iron abundance, and only the last four remain as global parameters in our modelling of the whole sequence. Our theoretically computed points cover well the optical plane part populated with the observed quasars, particularly if we allow for super-Solar abundance of heavy elements. Explanation of the exceptionally strong Fe II emitter requires a stronger contribution from the dark sides of the clouds. Analyzing the way how our model covers the optical plane we conclude that there is no single simple driver behind the sequence, as neither the Eddington ratio nor broad band spectrum shape plays the dominant role. Also, the role of the viewing angle in providing the dispersion of the quasar main sequence is apparently not as strong as expected.

astro-ph.HE↗

arXiv2018

Narrow-line Seyfert 1 galaxies in the context of the Quasar Main Sequence

Narrow-line Seyfert 1 galaxies are defined on the basis of their line widths, and they are generally considered to be high Eddington ratio sources. But in the context of the Quasar Main Sequence, high Eddington rate sources are those which have weak [O III] lines and strong Fe II lines. There is an overlap between the two populations, but they are not identical. Thus these two selection criteria give a different view on which objects are actually high Eddington ratio sources. We discuss this issue in the context of the broad band spectral energy density, emission line shape modeling, Fe II pseudo-continuum strength, and the level of X-ray variability. We also discuss the issue of the viewing angle and the insight one can gain from spectropolarimetric observations. We conclude that there is no single driver behind the Quasar Main Sequence, and the Eddington ratio of the source cannot be determined from the source location on the optical plane alone. On the other hand, an expected range of AGN parameters combined with a simple model of the Fe II production represent well the observed coverage pattern of the plane, with not much effect needed from the dispersion due to the viewing angle.

astro-ph.GA↗

arXiv2018

Using vo tools to iNvestIgate Quasar Spectra (UNIQS)

The work initially started as a test to retrace the Shen & Ho (2014) Quasar Main Sequence diagram where they (and references therein) claimed that the parameter RFeII, which defines the Eigenvector 1 (EV1) is driven by the Eddington ratio alone. We subsequently construct a refined (error and redshift limited) sample from the original Shen et. al (2011) QSO catalogue. Based on our hypothesis - the main driver of the Quasar Main Sequence is the maximum of the accretion disk temperature defined by the Big Blue Bump on the Spectral Energy Distribution. We select five extreme sources that have RFeII >= 4.0 and use the SED modelling code CIGALE to fit the multi-band photometric data for these sources. Incorporating the prescription for broad emission-line species dependent virial factors, we derive the black hole masses for the entire Shen+11 catalogue and compare their distribution with the black hole masses in the original catalogue. Here, we show the results of our analysis for one of the 5 extreme sources, SDSSJ082358.30+213545.2. We also show the detailed modelling, including the Fe II pseudo-continuum to estimate and compare the value of RFeII for this object.

astro-ph.HE↗

arXiv2017

What drives the Quasar Main Sequence?

Eigenvector 1 (EV1) was found to be the dominant component behind the significant correlations for the measured parameters in quasar spectra (Boroson & Green, 1992). The parameter R$_{\mathrm{FeII}}$, which strongly correlates to the EV1, is the ${\mathrm{FeII}}$ strength, defined to be the ratio of the equivalent width of ${\mathrm{FeII}}$ to the equivalent width of ${\mathrm{Hβ}}$. This allows to construct a quasar main sequence analogous to the stellar properties driven HR diagram (Sulentic et al. 2001). We try to find the main driver behind the EV1 among the basic (theoretically motivated) parameters of an active nucleus (Eddington ratio, black hole mass, accretion rate, spin, and viewing angle). Based on theoretical modeling using the photoionization code CLOUDY (Ferland et al. 2013), we test the hypothesis that the physical driver of EV1 is the maximum of the accretion disk temperature ($\mathrm{T_{BBB}}$), reflected in the shape of the spectral energy distribution (SED). We have assumed that both H$\mathrmβ$ and Fe${\mathrm{II}}$ emission come from the Broad Line Region represented as a constant density cloud in a plane-parallel geometry. We test the effect of changing Eddington ratio on the $\mathrm{R_{FeII} - T_{BBB}}$ trends with varying mean hydrogen densities. We also test the effect of adding microturbulence that affect the line intensities on the overall $\mathrm{R_{FeII} - T_{BBB}}$ picture.

astro-ph.HE↗

arXiv2017

Testing the physical driver of Eigenvector 1 in Quasar Main Sequence

Quasars are among the most luminous sources characterized by their broad band spectra ranging from radio through optical to X-ray band, with numerous emission and absorption features. Using the Principal Component Analysis (PCA), Boroson & Green (1992) were able to show significant correlations between the measured parameters. Among the significant correlations projected, the leading component, related to Eigenvector 1 (EV1) was dominated by the anti-correlation between the Fe${\mathrm{II}}$ optical emission and [OIII] line where the EV1 alone contained 30% of the total variance. This introduced a way to define a quasar main sequence, in close analogy to the stellar main sequence in the Hertzsprung-Russel (HR) diagram (Sulentic et. al 2001). Which of the basic theoretically motivated parameters of an active nucleus (Eddington ratio, black hole mass, accretion rate, spin, and viewing angle) is the main driver behind the EV1 yet remains to be answered. We currently limit ourselves to the optical waveband, and concentrate on theoretical modelling the Fe${\mathrm{II}}$ to H$\mathrmβ$ ratio, and test the hypothesis that the physical driver of EV1 is the maximum of the accretion disk temperature, reflected in the shape of the spectral energy distribution (SED). We performed computations of the H$\mathrmβ$ and optical Fe${\mathrm{II}}$ for a broad range of SED peak position using CLOUDY photoionisation code. We assumed that both H$\mathrmβ$ and Fe${\mathrm{II}}$ emission come from the Broad Line Region represented as a constant density cloud in a plane-parallel geometry. We compare the results for two different approaches: (1) considering a fixed bolometric luminosity for the SED; (2) considering $\mathrm{L_{bol}/L_{Edd}}$ = 1.

astro-ph.HE↗

arXiv2017

The physical driver of the optical Eigenvector 1 in Quasar Main Sequence

Quasars are complex sources, characterized by broad band spectra from radio through optical to X-ray band, with numerous emission and absorption features. However, Boroson & Green (1992) used Principal Component Analysis (PCA), and with this analysis they were able to show significant correlations between the measured parameters. The leading component, related to Eigenvector 1 (EV1) was dominated by the anticorrelation between the Fe${\mathrm{II}}$ optical emission and [OIII] line and EV1 alone contained 30% of the total variance. It opened a way in defining a quasar main sequence, in close analogy to the stellar main sequence on the Hertzsprung-Russel (HR) diagram (Sulentic et al. 2001). The question still remains which of the basic theoretically motivated parameters of an active nucleus (Eddington ratio, black hole mass, accretion rate, spin, and viewing angle) is the main driver behind the EV1. Here we limit ourselves to the optical waveband, and concentrate on theoretical modelling the Fe${\mathrm{II}}$ to H$\mathrmβ$ ratio, and we test the hypothesis that the physical driver of EV1 is the maximum of the accretion disk temperature, reflected in the shape of the spectral energy distribution (SED). We performed computations of the H$\mathrmβ$ and optical Fe${\mathrm{II}}$ for a broad range of SED peak position using CLOUDY photoionisation code. We assumed that both H$\mathrmβ$ and Fe${\mathrm{II}}$ emission come from the Broad Line Region represented as a constant density cloud in a plane-parallel geometry. We expected that a hotter disk continuum will lead to more efficient production of Fe${\mathrm{II}}$ but our computations show that the Fe${\mathrm{II}}$ to H$\mathrmβ$ ratio actually drops with the rise of the disk temperature. Thus either hypothesis is incorrect, or approximations used in our paper for the description of the line emissivity is inadequate.

astro-ph.HE↗