arXiv subjects

Sylvestre Lacour

Publications and source records attributed to Sylvestre Lacour.

At least 37 records · Page 2Linked to original sources

arXiv2024

First Resolution of Microlensed Images of a Binary-Lens Event

We resolve the multiple images of the binary-lens microlensing event ASASSN-22av using the GRAVITY instrument of the Very Large Telescope Interferometer (VLTI). The light curves show weak binary-lens perturbations, complicating the analysis, but the joint modeling with the VLTI data breaks several degeneracies, arriving at a strongly favored solution. Thanks to precise measurements of angular Einstein radius θ_E = 0.724 +/- 0.002 mas and microlens parallax, we determine that the lens system consists of two M dwarfs with masses of M_1 = 0.258 +/- 0.008 M_sun and M_2 = 0.130 +/- 0.007 M_sun, a projected separation of r_\perp = 6.83 +/- 0.31 au and a distance of D_L = 2.29 +/- 0.08 kpc. The successful VLTI observations of ASASSN-22av open up a new path for studying intermediate-separation (i.e., a few astronomical units) stellar-mass binaries, including those containing dark compact objects such as neutron stars and stellar-mass black holes.

astro-ph.SR↗

arXiv2024

Spectroscopy using a visible photonic lantern at the Subaru telescope: Laboratory characterization and first on-sky demonstration on Ikiiki (α Leo) and `Aua (α Ori)

Photonic lanterns are waveguide devices enabling high throughput single mode spectroscopy and high angular resolution. We aim to present the first on-sky demonstration of a photonic lantern (PL) operating in visible light, to measure its throughput and assess its potential for high-resolution spectroscopy of compact objects. We used the SCExAO instrument (a double stage extreme AO system installed at the Subaru telescope) and FIRST mid-resolution spectrograph (R 3000) to test the visible capabilities of the PL on internal source and on-sky observations. The best averaged coupling efficiency over the PL field of view was measured at 51% +/- 10% with a peak at 80%. We also investigate the relationship between coupling efficiency and the Strehl ratio for a PL, comparing them with those of a single-mode fiber (SMF). Findings show that in the AO regime, a PL offers better coupling efficiency performance than a SMF, especially in the presence of low spatial frequency aberrations. We observed Ikiiki (alpha Leo - mR = 1.37) and `Aua (alpha Ori - mR = -1.17) at a frame rate of 200 Hz. Under median seeing conditions (about 1 arcsec measured in H band) and large tip/tilt residuals (over 20 mas), we estimated an average light coupling efficiency of 14.5% +/- 7.4%, with a maximum of 42.8% at 680 nm. We were able to reconstruct both star's spectra, containing various absorption lines. The successful demonstration of this device opens new possibilities in terms of high throughput single-mode fiber-fed spectroscopy in the Visible. The demonstrated on-sky coupling efficiency performance would not have been achievable with a single SMF injection setup under similar conditions, partly because the residual tip/tilt alone exceeded the field of view of a visible SMF (18 mas at 700 nm). Thus emphasizing the enhanced resilience of PL technology to such atmospheric disturbances. The additional

astro-ph.IM↗

arXiv2024

VLTI/GRAVITY Observations of AF Lep b: Preference for Circular Orbits, Cloudy Atmospheres, and a Moderately Enhanced Metallicity

Direct imaging observations are biased towards wide-separation, massive companions that have degenerate formation histories. Although the majority of exoplanets are expected to form via core accretion, most directly imaged exoplanets have not been convincingly demonstrated to follow this formation pathway. We obtained new interferometric observations of the directly imaged giant planet AF Lep b with the VLTI/GRAVITY instrument. We present three epochs of 50$μ$as relative astrometry and the K-band spectrum of the planet for the first time at a resolution of R=500. Using only these measurements, spanning less than two months, and the Hipparcos-Gaia Catalogue of Accelerations, we are able to significantly constrain the planet's orbit; this bodes well for interferometric observations of planets discovered by Gaia DR4. Including all available measurements of the planet, we infer an effectively circular orbit ($e<0.02, 0.07, 0.13$ at $1, 2, 3 σ$) in spin-orbit alignment with the host, and a measure a dynamical mass of $M_\mathrm{p}=3.75\pm0.5\,M_\mathrm{Jup}$. Models of the spectrum of the planet show that it is metal rich ([M/H]$=0.75\pm0.25$), with a C/O ratio encompassing the solar value. This ensemble of results show that the planet is consistent with core accretion formation.

astro-ph.EP↗

arXiv2024

Improving constraints on the extended mass distribution in the Galactic Center with stellar orbits

Studying the orbital motion of stars around Sagittarius A* in the Galactic Center provides a unique opportunity to probe the gravitational potential near the supermassive black hole at the heart of our Galaxy. Interferometric data obtained with the GRAVITY instrument at the Very Large Telescope Interferometer (VLTI) since 2016 has allowed us to achieve unprecedented precision in tracking the orbits of these stars. GRAVITY data have been key to detecting the in-plane, prograde Schwarzschild precession of the orbit of the star S2, as predicted by General Relativity. By combining astrometric and spectroscopic data from multiple stars, including S2, S29, S38, and S55 - for which we have data around their time of pericenter passage with GRAVITY - we can now strengthen the significance of this detection to an approximately $10 σ$ confidence level. The prograde precession of S2's orbit provides valuable insights into the potential presence of an extended mass distribution surrounding Sagittarius A*, which could consist of a dynamically relaxed stellar cusp comprised of old stars and stellar remnants, along with a possible dark matter spike. Our analysis, based on two plausible density profiles - a power-law and a Plummer profile - constrains the enclosed mass within the orbit of S2 to be consistent with zero, establishing an upper limit of approximately $1200 \, M_\odot$ with a $1 σ$ confidence level. This significantly improves our constraints on the mass distribution in the Galactic Center. Our upper limit is very close to the expected value from numerical simulations for a stellar cusp in the Galactic Center, leaving little room for a significant enhancement of dark matter density near Sagittarius A*.

astro-ph.GA↗

arXiv2024

Spectral interferometric wavefront sensing: a solution for petalometry at Subaru/SCExAO

The petaling effect, induced by pupil fragmentation from the telescope spider, drastically affects the performance of high contrast instruments by inducing core splitting on the PSF. Differential piston/tip/tilt aberrations within each optically separated fragment of the pupil are poorly measured by commonly used Adaptive Optics (AO) systems. We here pursue a design of dedicated low-order wavefront sensor -- or petalometers -- to complement the main AO. Interferometric devices sense differential aberrations between fragments with optimal sensitivity; their weakness though is their limitation to wrapped phase measurements. We show that by combining multiple spectral channels, we increase the capture range for petaling aberrations beyond several microns, enough to disambiguate one-wave wrapping errors made by the main AO system. We propose here to implement a petalometer from the multi-wavelength imaging mode of the VAMPIRES visible-light instrument, deployed on SCExAO at the Subaru Telescope. The interferometric measurements obtained in four spectral channels through a 7 hole non-redundant mask allow us to effiiently reconstruct diffierential piston between pupil petals.

astro-ph.IM↗

arXiv2024

Photonic beam-combiner for visible interferometry with SCExAO/FIRST: laboratory characterization and design optimization

Integrated optics are used to achieve astronomical interferometry inside robust and compact materials, improving the instrument's stability and sensitivity. In order to perform differential phase measurements at the H$α$ line (656.3 nm) with the 600-800 nm spectro-interferometer FIRST, a photonic integrated circuit (PIC) is being developed in collaboration with TEEM Photonics. This PIC performs the interferometric combination of the beams coming from sub-apertures selected in the telescope pupil, thus implementing the pupil remapping technique to restore the diffraction limit of the telescope. In this work, we report on the latest developments carried out within the FIRST project to produce a high performance visible PIC. The PICs are manufactured by TEEM Photonics, using their technology based on $K_+:Na_+$ ion exchange in glass. The first part of the study consists in the experimental characterization of the fundamental properties of the waveguides, in order to build an accurate model, which is the basis for the design of more complex functions. In the second part, theoretical designs and their optimization for three types of combiner architectures are presented: symmetric directional coupler, asymmetric directional couplers and ABCD cells including achromatic phase shifters.

astro-ph.IM↗

arXiv2024

Photonic chip for visible interferometry: laboratory characterization and comparison with the theoretical model

Integrated optics are used to achieve astronomical interferometry inside robust and compact materials, improving the instruments stability and sensitivity. In order to perform differential phase measurements at the H$α$ line (656.3 nm) with the 600-800 nm spectro-interferometer FIRST, a photonic integrated circuit (PIC) is being developed. This PIC performs the visible combination of the beams coming from the telescope pupil sub-apertures. In this work, TEEM Photonics waveguides fabricated by $K_+:Na_+$ ion exchange in glass are characterized in terms of single-mode range and mode field diameter. The waveguide diffused index profile is modeled on Beamprop software. FIRST beam combiner building blocks are simulated, especially achromatic directional couplers and passive $π/2$ phase shifters for a potential ABCD interferometric combination.

astro-ph.IM↗

arXiv2024

The MICADO first light imager for the ELT: Sparse Aperture Masks, design and simulations

MICADO, the European Extremely Large Telescope first light imager will feature a dedicated high contrast imaging mode specifically designed for observing and characterizing exoplanets and circumstellar disks. Two sparse aperture masks (SAM) will be included, consisting of opaque masks with a set of holes arranged in a non-redundant configuration. Pupil masking transforms a monolithic telescope into an interferometer, with the aim of recovering spatial information down to the diffraction limit of the telescope and below, even in the presence of residual aberrations, such as turbulent AO residuals, and non common path aberrations. On the ELT, SAM will enable the detection of features down to 3.3mas in the J band, 12mas in the K band. Two designs have been chosen and will be reviewed, with complementarity in terms of sensitivity and spatial frequency coverage for image reconstruction. In this contribution, the technical choices will be detailed, such as the hole diameter and arrangement, given the technical constraints such as spectral filter bandwidths, detector dimensions, sampling, read-out-noise and frame rate. We will also report on simulations performed to assess the expected capabilities of this mode, with application examples of close companion detection and contrast curves.

astro-ph.IM↗

arXiv2024

VLTI Unit Telescope coudé train vibration control upgrade for GRAVITY+

Scaling up interferometry to 8m collectors should smooth-out the optical piston perturbations and allow a slow fringe tracker to obtain high precision correction on faint targets. In practice, the GRAVITY fringe tracker still observes high frequency OPD components that limit the exposure time, its precision and limiting magnitude. Perturbations seem to come from mechanical vibrations in the train of mirrors. As part of the GRAVITY+ efforts, accelerometers were added to all the mirrors of the coudé train to compensate in real-time the optical path using the main delay lines. We show their effectiveness on vibrations peaks between 40 and 200Hz and outline prospects for the upgrade of the deformable mirrors and the beam-compressor differential delay lines.

astro-ph.IM↗

arXiv2024

Visible Photonic Lantern integration, characterization and on-sky testing on Subaru/SCExAO

A Photonic Lantern (PL) is a novel device that efficiently converts a multi-mode fiber into several single-mode fibers. When coupled with an extreme adaptive optics (ExAO) system and a spectrograph, PLs enable high throughput spectroscopy at high angular resolution. The Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) system of the Subaru Telescope recently acquired a PL that converts its multi-mode input into 19 single-mode outputs. The single mode outputs feed a R~4,000 spectrograph optimized for the 600 to 760 nm wavelength range. We present here the integration of the PL on SCExAO, and study the device performance in terms of throughput, field of view, and spectral reconstruction. We also present the first on-sky demonstration of a Visible PL coupled with an ExAO system, showing a significant improvement of x12 in throughput compared to the use of a sole single-mode fiber. This work paves the way towards future high throughput photonics instrumentation at small angular resolution.

astro-ph.IM↗

arXiv2024

The $β$ Pictoris b Hill sphere transit campaign. Paper II: Searching for the signatures of the $β$ Pictoris exoplanets through time delay analysis of the $δ$ Scuti pulsations

The $β$ Pictoris system is the closest known stellar system with directly detected gas giant planets, an edge-on circumstellar disc, and evidence of falling sublimating bodies and transiting exocomets. The inner planet, $β$ Pictoris c, has also been indirectly detected with radial velocity (RV) measurements. The star is a known $δ$ Scuti pulsator, and the long-term stability of these pulsations opens up the possibility of indirectly detecting the gas giant planets through time delays of the pulsations due to a varying light travel time. We search for phase shifts in the $δ$ Scuti pulsations consistent with the known planets $β$ Pictoris b and c and carry out an analysis of the stellar pulsations of $β$ Pictoris over a multi-year timescale. We used photometric data collected by the BRITE-Constellation, bRing, ASTEP, and TESS to derive a list of the strongest and most significant $δ$ Scuti pulsations. We carried out an analysis with the open-source python package maelstrom to study the stability of the pulsation modes of $β$ Pictoris in order to determine the long-term trends in the observed pulsations. We did not detect the expected signal for $β$ Pictoris b or $β$ Pictoris c. The expected time delay is 6 seconds for $β$ Pictoris c and 24 seconds for $β$ Pictoris b. With simulations, we determined that the photometric noise in all the combined data sets cannot reach the sensitivity needed to detect the expected timing drifts. An analysis of the pulsational modes of $β$ Pictoris using maelstrom showed that the modes themselves drift on the timescale of a year, fundamentally limiting our ability to detect exoplanets around $β$ Pictoris via pulsation timing.

astro-ph.EP↗

arXiv2024

Searching for low-mass companions at small separations in transition disks with aperture masking interferometry

Transition disks have large central cavities that have been spatially resolved during recent years. Cavities and other substructures in circumstellar disks are often interpreted as signposts to massive companions. We aim to search for stellar and substellar companions in the central regions of transition disks. We want to determine if these disks might be circumbinary in their nature, similar to the HD 142527 system. We observed four systems, HD 100453, HD 100546, HD 135344 B, and PDS 70, with the sparse aperture masking mode of VLT/SPHERE. We extracted the complex visibilities and bispectra from the H2 and H3 imaging data. A binary model was fit to the closure phases to search for companions and estimate detection limits. For validation, we also analyzed four archival datasets of HD 142527 and inferred the orbital elements and atmospheric parameters of its low-mass stellar companion. We have not detected any significant point sources in the four observed systems. With a contrast sensitivity of $\approx$0.004, we can rule out stellar companions down to $\approx$2 au and partially explore the substellar regime at separations $\gtrsim$3-5 au. The analysis of HD 142527 B revealed that its projected orbit is aligned with dust features in the extended inner disk and that the orbit could be close to coplanar with the outer disk. Atmospheric modeling confirms the low-gravity and slightly reddened spectral appearance. The bulk parameters are in agreement with dynamical constraints and evolutionary tracks. In contrast to HD 142527, we find no evidence that a close-in stellar companion is responsible for the resolved disk features of HD 100453, HD 100546, HD 135344 B, and PDS 70. Instead, the formation of giant planets or even low-mass brown dwarfs could be shaping the innermost environment ($\lesssim$20 au) of these circumstellar disks, as is the case with the planetary system of PDS 70.

astro-ph.EP↗

arXiv2023

2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments

Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms.

astro-ph.IM↗

arXiv2023

Photonic spectro-interferometry with SCExAO/FIRST at the Subaru Telescope: towards H-alpha imaging of protoplanets

FIRST is a post Extreme Adaptive-Optics (ExAO) spectro-interferometer operating in the Visible (600-800 nm, R~400). Its exquisite angular resolution (a sensitivity analysis of on-sky data shows that bright companions can be detected down to 0.25lambda/D) combined with its sensitivity to pupil phase discontinuities (from a few nm up to dozens of microns) makes FIRST an ideal self-calibrated solution for enabling exoplanet detection and characterization in the future. We present the latest on-sky results along with recent upgrades, including the integration and on-sky test of a new spectrograph (R~3,600) optimized for the detection of H-alpha emission from young exoplanets accreting matter.

astro-ph.IM↗

arXiv2023

Single-aperture spectro-interferometry in the visible at the Subaru telescope with FIRST: First on-sky demonstration on Keho'oea (α Lyrae) and Hokulei (α Aurigae)

FIRST is a spectro-interferometer combining, in the visible, the techniques of aperture masking and spatial filtering thanks to single-mode fibers. This instrument aims to deliver high contrast capabilities at spatial resolutions that are inaccessible to classical coronagraphic instruments. The technique implemented is called pupil remapping: the telescope is divided into subpupils by a segmented deformable mirror conjugated to a micro-lens array injecting light into single-mode fibers. The fiber outputs are rearranged in a nonredundant configuration, allowing simultaneous measurement of all baseline fringe patterns. The fringes are also spectrally dispersed, increasing the coherence length and providing precious spectral information. The optical setup of the instrument has been adapted to fit onto the SCExAO platform at the Subaru Telescope. We present the first on-sky demonstration of the FIRST instrument at the Subaru telescope. We used eight subapertures, each with a diameter of about 1 m. Closure phase measurements were extracted from the interference pattern to provide spatial information on the target. We tested the instrument on two types of targets : a point source (Keho'oea) and a binary system (Hokulei). An average accuracy of 0.6 degree is achieved on the closure phase measurements of Keho'oea, with a statistical error of about 0.15 degree at best. We estimate that the instrument can be sensitive to structures down to a quarter of the telescope spatial resolution. We measured the relative positions of Hokulei Aa and Ab with an accuracy about 1 mas. FIRST opens new observing capabilities in the visible wavelength range at the Subaru Telescope. With SCExAO being a testing platform for high contrast imaging instrumentation for future 30-meter class telescopes, FIRST is an important stepping stone for future interferometric instrumentation on extremely large telescopes.

astro-ph.IM↗

arXiv2023

The GRAVITY+ Project: Towards All-sky, Faint-Science, High-Contrast Near-Infrared Interferometry at the VLTI

The GRAVITY instrument has been revolutionary for near-infrared interferometry by pushing sensitivity and precision to previously unknown limits. With the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) in GRAVITY+, these limits will be pushed even further, with vastly improved sky coverage, as well as faint-science and high-contrast capabilities. This upgrade includes the implementation of wide-field off-axis fringe-tracking, new adaptive optics systems on all Unit Telescopes, and laser guide stars in an upgraded facility. GRAVITY+ will open up the sky to the measurement of black hole masses across cosmic time in hundreds of active galactic nuclei, use the faint stars in the Galactic centre to probe General Relativity, and enable the characterisation of dozens of young exoplanets to study their formation, bearing the promise of another scientific revolution to come at the VLTI.

astro-ph.IM↗

arXiv2022

Controlling petals using fringes: discontinuous wavefront sensing through sparse aperture interferometry at Subaru/SCExAO

Low wind and petaling effects, caused by the discontinuous apertures of telescopes, are poorly corrected -- if at all -- by commonly used workhorse wavefront sensors (WFSs). Wavefront petaling breaks the coherence of the point spread function core, splitting it into several side lobes, dramatically shutting off scientific throughput. We demonstrate the re-purposing of non-redundant sparse aperture masking (SAM) interferometers into low-order WFSs complementing the high-order pyramid WFS, on the SCExAO experimental platform at Subaru Telescope. The SAM far-field interferograms formed from a 7-hole mask are used for direct retrieval of petaling aberrations, which are almost invisible to the main AO loop. We implement a visible light dual-band SAM mode, using two disjoint 25 nm wide channels, that we recombine to overcome the one-lambda ambiguity of fringe-tracking techniques. This enables a control over petaling with sufficient capture range yet without conflicting with coronagraphic modes in the near-infrared. We present on-sky engineering results demonstrating that the design is able to measure petaling well beyond the range of a single-wavelength equivalent design.

astro-ph.IM↗

arXiv2022

Interpreting the atmospheric composition of exoplanets: sensitivity to planet formation assumptions

Constraining planet formation based on the atmospheric composition of exoplanets is a fundamental goal of the exoplanet community. Existing studies commonly try to constrain atmospheric abundances, or to analyze what abundance patterns a given description of planet formation predicts. However, there is also a pressing need to develop methodologies that investigate how to transform atmospheric compositions into planetary formation inferences. In this study we summarize the complexities and uncertainties of state-of-the-art planet formation models and how they influence planetary atmospheric compositions. We introduce a methodology that explores the effect of different formation model assumptions when interpreting atmospheric compositions. We apply this framework to the directly imaged planet HR 8799e. Based on its atmospheric composition, this planet may have migrated significantly during its formation. We show that including the chemical evolution of the protoplanetary disk leads to a reduced need for migration. Moreover, we find that pebble accretion can reproduce the planet's composition, but some of our tested setups lead to too low atmospheric metallicities, even when considering that evaporating pebbles may enrich the disk gas. We conclude that the definitive inversion from atmospheric abundances to planet formation for a given planet may be challenging, but a qualitative understanding of the effects of different formation models is possible, opening up pathways for new investigations.

astro-ph.EP↗