arXiv subjects

Symeon Chatzinotas

Publications and source records attributed to Symeon Chatzinotas.

At least 271 records · Page 15Linked to original sources

arXiv2022

Edge Computing for Semantic Communication Enabled Metaverse: An Incentive Mechanism Design

Semantic communication (SemCom) and edge computing are two disruptive solutions to address emerging requirements of huge data communication, bandwidth efficiency and low latency data processing in Metaverse. However, edge computing resources are often provided by computing service providers and thus it is essential to design appealingly incentive mechanisms for the provision of limited resources. Deep learning (DL)- based auction has recently proposed as an incentive mechanism that maximizes the revenue while holding important economic properties, i.e., individual rationality and incentive compatibility. Therefore, in this work, we introduce the design of the DLbased auction for the computing resource allocation in SemComenabled Metaverse. First, we briefly introduce the fundamentals and challenges of Metaverse. Second, we present the preliminaries of SemCom and edge computing. Third, we review various incentive mechanisms for edge computing resource trading. Fourth, we present the design of the DL-based auction for edge resource allocation in SemCom-enabled Metaverse. Simulation results demonstrate that the DL-based auction improves the revenue while nearly satisfying the individual rationality and incentive compatibility constraints.

cs.GT↗

arXiv2022

Joint Linear Precoding and DFT Beamforming Design for Massive MIMO Satellite Communication

This paper jointly designs linear precoding (LP) and codebook-based beamforming implemented in a satellite with massive multiple-input multiple-output (mMIMO) antenna technology. The codebook of beamforming weights is built using the columns of the discrete Fourier transform (DFT) matrix, and the resulting joint design maximizes the achievable throughput under limited transmission power. The corresponding optimization problem is first formulated as a mixed integer non-linear programming (MINP). To adequately address this challenging problem, an efficient LP and DFT-based beamforming algorithm are developed by utilizing several optimization tools, such as the weighted minimum mean square error transformation, duality method, and Hungarian algorithm. In addition, a greedy algorithm is proposed for benchmarking. A complexity analysis of these solutions is provided along with a comprehensive set of Monte Carlo simulations demonstrating the efficiency of our proposed algorithms.

eess.SP↗

arXiv2022

Federated Multi-Task Learning for THz Wideband Channel and DoA Estimation

This paper addresses two major challenges in terahertz (THz) channel estimation: the beam-split phenomenon, i.e., beam misalignment because of frequency-independent analog beamformers, and computational complexity because of the usage of ultra-massive number of antennas to compensate propagation losses. Data-driven techniques are known to mitigate the complexity of this problem but usually require the transmission of the datasets from the users to a central server entailing huge communication overhead. In this work, we introduce a federated multi-task learning (FMTL), wherein the users transmit only the model parameters instead of the whole dataset, for THz channel and user direction-of-arrival (DoA) estimation to improve the communications-efficiency. We first propose a novel beamspace support alignment technique for channel estimation with beam-split correction. Then, the channel and DoA information are used as labels to train an FMTL model. By exploiting the sparsity of the THz channel, the proposed approach is implemented with fewer pilot signals than the traditional techniques. Compared to the previous works, our FMTL approach provides higher channel estimation accuracy as well as approximately 25 (32) times lower model (channel) training overhead, respectively.

eess.SP↗

arXiv2022

Cooperative Hybrid Networks with Active Relays and RISs for B5G: Applications, Challenges, and Research Directions

Among the recent advances and innovations in wireless technologies, reconfigurable intelligent surfaces (RISs) have received much attention and are envisioned to be one of the enabling technologies for beyond 5G (B5G) networks. On the other hand, active (or classical) cooperative relays have played a key role in providing reliable and power-efficient communications in previous wireless generations. In this article, we focus on hybrid network architectures that amalgamate both active relays and RISs. The operation concept and protocols of each technology are first discussed. Subsequently, we present multiple use cases of cooperative hybrid networks where both active relays and RISs can coexist harmoniously for enhanced rate performance. Furthermore, a case study is provided which demonstrates the achievable rate performance of a communication network assisted by either an active relay, an RIS, or both, and with different relaying protocols. Finally, we provide the reader with the challenges and key research directions in this area.

cs.IT↗

arXiv2022

Intelligent Traffic Steering in Beyond 5G Open RAN based on LSTM Traffic Prediction

Open radio access network (ORAN) Alliance offers a disaggregated RAN functionality built using open interface specifications between blocks. To efficiently support various competing services, \textit{namely} enhanced mobile broadband (eMBB) and ultra-reliable and low-latency (uRLLC), the ORAN Alliance has introduced a standard approach toward more virtualized, open and intelligent networks. To realize benefits of ORAN in optimizing resource utilization, this paper studies an intelligent traffic steering (TS) scheme within the proposed disaggregated ORAN architecture. For this purpose, we propose a joint intelligent traffic prediction, flow-split distribution, dynamic user association and radio resource management (JIFDR) framework in the presence of unknown dynamic traffic demands. To adapt to dynamic environments on different time scales, we decompose the formulated optimization problem into two long-term and short-term subproblems, where the optimality of the later is strongly dependent on the optimal dynamic traffic demand. We then apply a long-short-term memory (LSTM) model to effectively solve the long-term subproblem, aiming to predict dynamic traffic demands, RAN slicing, and flow-split decisions. The resulting non-convex short-term subproblem is converted to a more computationally tractable form by exploiting successive convex approximations. Finally, simulation results are provided to demonstrate the effectiveness of the proposed algorithms compared to several well-known benchmark schemes.

eess.SY↗

arXiv2022

Efficient Hamiltonian Reduction for Quantum Annealing on SatCom Beam Placement Problem

Beam Placement (BP) is a well-known problem in Low-Earth Orbit (LEO) satellite communication (SatCom) systems, which can be modelled as an NP-hard clique cover problem. Recently, quantum computing has emerged as a novel technology which revolutionizes how to solve challenging optimization problems by formulating Quadratic Unconstrained Binary Optimization (QUBO), then preparing Hamiltonians as inputs for quantum computers. In this paper, we study how to use quantum computing to solve BP problems. However, due to limited hardware resources, existing quantum computers are unable to tackle large optimization spaces. Therefore, we propose an efficient Hamiltonian Reduction method that allows quantum processors to solve large BP instances encountered in LEO systems. We conduct our simulations on real quantum computers (D-Wave Advantage) using a real dataset of vessel locations in the US. Numerical results show that our algorithm outperforms commercialized solutions of D-Wave by allowing existing quantum annealers to solve 17.5 times larger BP instances while maintaining high solution quality. Although quantum computing cannot theoretically overcome the hardness of BP problems, this work contributes early efforts to applying quantum computing in satellite optimization problems, especially applications formulated as clique cover/graph coloring problems.

cs.IT↗

arXiv2022

Combining Relaying and Reflective Surfaces: Power Consumption and Energy Efficiency Analysis

Hybrid relaying networks (HRNs) combining both a relay and an intelligent reflective surface (IRS) can lead to enhanced rate performance compared to non-hybrid relaying schemes, where only either an IRS or a relay is utilized. However, utilizing both the relay and the IRS simultaneously results in higher power consumption for the HRNs compared to their counterpart. In this work, we study the required transmit power levels and the energy efficiency (EE) of HRNs utilizing both a half-duplex decode-and-forward (HD-DF) relay and an IRS, and compare their performance with non-hybrid relaying schemes. The impact of the required channel estimation overheads is considered when the reflective beamforming design (RBD) at the IRS is carried out under both instantaneous and statistical channel state information models. Also, the investigation is performed for both slow- and fast-changing environments. In terms of the transmit power requirements, our results show that HRNs can lead to higher power savings if the number of reflective elements at the IRS is not very large. However, non-hybrid relaying schemes are shown to be more energy-efficient, unless the targeted rate is high and the IRS is distant from both transmitter and receiver but within a close proximity to the relay.

cs.IT↗

arXiv2022

Active Terminal Identification, Channel Estimation, and Signal Detection for Grant-Free NOMA-OTFS in LEO Satellite Internet-of-Things

This paper investigates the massive connectivity of low Earth orbit (LEO) satellite-based Internet-of-Things (IoT) for seamless global coverage. We propose to integrate the grant-free non-orthogonal multiple access (GF-NOMA) paradigm with the emerging orthogonal time frequency space (OTFS) modulation to accommodate the massive IoT access, and mitigate the long round-trip latency and severe Doppler effect of terrestrial-satellite links (TSLs). On this basis, we put forward a two-stage successive active terminal identification (ATI) and channel estimation (CE) scheme as well as a low-complexity multi-user signal detection (SD) method. Specifically, at the first stage, the proposed training sequence aided OTFS (TS-OTFS) data frame structure facilitates the joint ATI and coarse CE, whereby both the traffic sparsity of terrestrial IoT terminals and the sparse channel impulse response are leveraged for enhanced performance. Moreover, based on the single Doppler shift property for each TSL and sparsity of delay-Doppler domain channel, we develop a parametric approach to further refine the CE performance. Finally, a least square based parallel time domain SD method is developed to detect the OTFS signals with relatively low complexity. Simulation results demonstrate the superiority of the proposed methods over the state-of-the-art solutions in terms of ATI, CE, and SD performance confronted with the long round-trip latency and severe Doppler effect.

cs.IT↗

arXiv2022

Intelligent and Secure Radio Environments for 6G Vehicular Aided HetNets: Key Opportunities and Challenges

Reconfigurable meta-surfaces are emerging as a novel and revolutionizing technology to enable intelligent wireless environments. Due to the low cost, improved efficiency, and passive nature of reflecting elements, it is becoming possible to program and control the wireless environment. Since wireless physical layer technologies can generally adapt to the wireless environment, their combination with reconfigurable surfaces and deep learning approaches can open new avenues for achieving secure 6G vehicular aided heterogeneous networks (HetNets). Motivated by these appealing advantages, this work provides an intelligent and secure radio environment (ISRE) paradigm for 6G vehicular aided HetNets. We present an overview of enabling technologies for ISRE-based 6G vehicular aided HetNets. We discuss features, design goals, and applications of such networks. Next, we outline new opportunities provided by ISRE-based 6G vehicular HetNets and we present a case study using the contextual bandit approach in terms of best IRS for secure communications. Finally, we discuss some future research opportunities.

eess.SP↗

arXiv2022

Opportunities for Intelligent Reflecting Surfaces in 6G-Empowered V2X Communications

This paper first describes the introduction of 6G-empowered V2X communications and IRS technology. Then it discusses different use case scenarios of IRS enabled V2X communications and reports recent advances in the existing literature. Next, we focus our attention on the scenario of vehicular edge computing involving IRS enabled drone communications in order to reduce vehicle computational time via optimal computational and communication resource allocation. At the end, this paper highlights current challenges and discusses future perspectives of IRS enabled V2X communications in order to improve current work and spark new ideas.

eess.SP↗

arXiv2022

An Overview of Channel Models for NGSO Satellites

Satellite communications industry is currently going through a rapid and profound transformation to adapt to the recent innovations and developments in the realm of non-geostationary orbit (NGSO) satellites. The growing popularity of NGSO systems, with cheap manufacturing and launching costs, has set to revolutionize the internet market. In this context, accurate channel characterization is crucial for the performance optimization and designing efficient NGSO communications, especially considering the dynamic propagation environment. While the Third Generation Partnership Project (3GPP) has provided some guidelines in Release 15, we observed certain divergence on the channel models considered in the literature, each with different assumptions and peculiarities. This paper provides an extensive review of the existing methods proposed for NGSO channel modeling that consider different orbits, frequency bands, user equipment, use-case and scenario peculiarities. The provided review discusses the channel modeling efforts from a contemporary perspective through trade-off analyses, classifications, and highlighting their advantages and pitfalls. The main goal is to provide a comprehensive overview of NGSO channel models to facilitate the selection of the most appropriate channel based on the scenario requirements to be evaluated and/or analysed.

eess.SP↗

arXiv2022

Opportunities for Physical Layer Security in UAV Communication Enhanced with Intelligent Reflective Surfaces

Unmanned Aerial Vehicles (UAVs) are an important component of next-generation wireless networks that can assist in high data rate communications and provide enhanced coverage.Their high mobility and aerial nature offer deployment flexibility and low-cost infrastructure support to existing cellular networks and provide many applications that rely on mobile wireless communications. However, security is a major challenge in UAV communications, and Physical Layer Security (PLS) is an important technique to improve the reliability and security of data shared with the assistance of UAVs. Recently, Intelligent Reflecting Surfaces (IRS) have emerged as a novel technology to extend and/or enhance wireless coverage by re-configuring the propagation environment of communications. This paper provides an overview of how IRS can improve the PLS of UAV networks. We discuss different use cases of PLS for IRS enhanced UAV communications and briefly review the recent advances in this area. Then based on the recent advances, we also present a case study that utilizes alternate optimization to maximize the secrecy capacity for IRS enhanced UAV scenario in the presence of multiple eavesdroppers. Finally, we highlight several open issues and research challenges to realize PLS in IRS enhanced UAV communications.

eess.SP↗

arXiv2022

Non-Coherent Massive MIMO Integration in Satellite Communication

Massive Multiple Input-Multiple Output (mMIMO) technique has been considered an efficient standard to improve the transmission rate significantly for the following wireless communication systems, such as 5G and beyond. However, implementing this technology has been facing a critical issue of acquiring much channel state information. Primarily, this problem becomes more criticising in the integrated satellite and terrestrial networks (3GPP-Release 15) due to the countable high transmission delay. To deal with this challenging problem, the mMIMO-empowered non-coherent technique can be a promising solution. To our best knowledge, this paper is the first work considering employing the non-coherent mMIMO in satellite communication systems. This work aims to analyse the challenges and opportunities emerging with this integration. Moreover, we identified the issues in this conjunction. The preliminary results presented in this work show that the performance measured in bit error rate (BER) and the number of antennas are not far from that required for terrestrial links. Furthermore, thanks to mMIMO in conjunction with the non-coherent approach, we can work in a low signal-to-noise ratio (SNR) regime, which is an excellent advantage for satellite links.

cs.IT↗

arXiv2022

Power Allocation for Space-Terrestrial Cooperation Systems with Statistical CSI

This paper studies an integrated network design that boosts system capacity through cooperation between wireless access points (APs) and a satellite. By coherently combing the signals received by the central processing unit from the users through the space and terrestrial links, we mathematically derive an achievable throughput expression for the uplink (UL) data transmission over spatially correlated Rician channels. A closed-form expression is obtained when maximum ratio combining is employed to detect the desired signals. We formulate the max-min fairness and total transmit power optimization problems relying on the channel statistics to perform power allocation. The solution of each optimization problem is derived in form of a low-complexity iterative design, in which each data power variable is updated based on a closed-form expression. The mathematical analysis is validated with numerical results showing the added benefits of considering a satellite link in terms of improving the ergodic data throughput.

cs.IT↗

arXiv2022

Vector Perturbation Channel Inversion for SWIPT MU-MISO Systems

This letter investigates the employment of vector-perturbation (VP) precoding to convey simultaneously information and energy in multiple-user multiple-input single-output (MU-MISO) downlink channel. We show that the conventional VP in addition to the information capacity benefits that provides to linear channel inversion techniques, it enhances the harvested energy at the receivers due to the extended symbol constellation. To further boost harvesting performance, the proposed modified VP technique (named VP-EH) designs the VP integer offsets in order to maximize the delivered power. The proposed scheme incorporates an integer least square problem to find the closest lattice point to a point which is given by a Rayleigh quotient optimization problem. Finally, a convex combination between conventional VP and VP-EH is proposed to achieve a trade-off between maximizing information or energy. Theoretical and simulations results validate that VP is a promising technique to simultaneously convey information and energy in MU-MISO systems.

cs.IT↗

arXiv2022

Learning to Optimize: Balancing Two Conflict Metrics in MB-HTS Networks

For multi-beam high throughput (MB-HTS) geostationary (GEO) satellite networks, the congestion appears when user's demands cannot be fully satisfied. This paper boosts the system performance by formulating and solving the power allocation strategies under the congestion control to admit users. A new multi-objective optimization is formulated to balance the sum data throughput and the satisfied user set. After that, we come up with two different solutions, which efficiently tackle the multi-objective maximization problem: The model-based solution utilizes the weighted sum method to enhance the number of demand-satisfied users, whilst the supervised learning solution offers a low-computational complexity design by inheriting optimization structures as continuous mappings. Simulation results verify that our solutions effectively copes with the congestion and outperforms the data throughput demand than the other previous works.

cs.IT↗

arXiv2022

Security and Reliability Analysis of Satellite-Terrestrial Multi-Relay Networks with Imperfect CSI

This work investigates the security and reliability analysis for a novel satellite-terrestrial (SatTer) network. Specifically, a satellite attempts to transmit confidential information to a ground user (GU) via the support of multiple relay nodes in the presence of an eavesdropper that tries to overhear the information. A friendly jammer is deployed to improve the secure transmission between the satellite and the relays. Furthermore, satellite-to-relay generalized Rician fading channels and imperfect channel state information (CSI) are deployed to examine a general system model. In this context, the closed-formed expressions for the outage probability (OP) and intercept probability (IP) are derived corresponding to an amplify-and-forward (AF)-based relaying scheme, which is challenging and has not been studied before. Finally, the exactness of the mathematical analyses is validated through Monte Carlo simulations. Furthermore, the effects of various key parameters (e.g., channel estimation errors, satellite's transmit power, relay's transmit power, number of relays, and fading severity parameter) are examined.

cs.IT↗

arXiv2022

GEO Payload Power Minimization: Joint Precoding and Beam Hopping Design

This paper aims to jointly determine linear precoding (LP) vectors, beam hopping (BH), and discrete DVB-S2X transmission rates for the GEO satellite communication systems to minimize the payload power consumption and satisfy ground users' demands within a time window. Regarding constraint on the maximum number of illuminated beams per time slot, the technical requirement is formulated as a sparse optimization problem in which the hardware-related beam illumination energy is modeled in a sparsity form of the LP vectors. To cope with this problem, the compressed sensing method is employed to transform the sparsity parts into the quadratic form of precoders. Then, an iterative window-based algorithm is developed to update the LP vectors sequentially to an efficient solution. Additionally, two other two-phase frameworks are also proposed for comparison purposes. In the first phase, these methods aim to determine the MODCOD transmission schemes for users to meet their demands by using a heuristic approach or DNN tool. In the second phase, the LP vectors of each time slot will be optimized separately based on the determined MODCOD schemes.

eess.SP↗