arXiv subjects

T. A. Wang

Publications and source records attributed to T. A. Wang.

4 recordsLinked to original sources

arXiv2024

Reactor neutrino physics potentials of cryogenic pure-CsI crystal

This paper presents a world-leading scintillation light yield among inorganic crystals measured from a 0.5~kg pure-CsI detector operated at 77 Kelvin. Scintillation photons were detected by two 2-inch Hamamatsu SiPM arrays equipped with cryogenic front-end electronics. Benefiting the light yield enhancement of pure-CsI at low temperatures and the high photon detection efficiency of SiPM, a light yield of 30.1 photoelectrons per keV energy deposit was obtained for X-rays and $γ$-rays with energies from 5.9~keV to 59.6~keV. Instrumental and physical effects in the light yield measurement are carefully analyzed. This is the first stable cryogenic operation of kg-scale pure-CsI crystal readout by SiPM arrays at liquid nitrogen temperatures for several days. The world-leading light yield opens a door for the usage of pure-CsI crystal in several fields, particularly in detecting the coherent elastic neutrino-nucleus scattering of reactor neutrinos. The potential of using pure-CsI crystals in neutrino physics is discussed in the paper.

physics.ins-det↗

arXiv2023

A study of liquid argon detector's $n$/$γ$ discrimination capability with PMT or SiPM readout

Liquid Argon (LAr) is used as a target material in several current and planned experiments related to dark matter direct searching and neutrino detection. Argon provides excellent Pulse Shape Discrimination (PSD) capability which could separate the electron recoil backgrounds from the expected nuclear recoil signals. This essay simulated the PSD capability of an LAr detector when PMTs or three kinds of SiPMs are used as photosensors based on the experimental data. The results show that the J-60035 SiPM could help the LAr detector achieve the highest PSD capability event though SiPM's After-Pulse (AP) and Cross-Talk (CT) deteriorate its PSD capability. In addition, the results also show that the effect from AP is greater than CT. This is instructive for selecting photosensors for LAr detectors.

physics.ins-det↗

arXiv2023

Developing a single phase liquid argon detector with SiPM readout

Liquid argon is used as a target material in several current and planned experiments related to dark matter direct searching and neutrino detection. SiPM is becoming the standard for scintillator detectors because of its advantages over traditional PMT. In this paper, we developed a single-phase liquid argon detector using eight 1 $\times$1 inch$^2$ Hamamatsu S14161-6050HS 4$\times$4 SiPM arrays. The directly measured light yield is 25.7 $\pm$ 1.6 photo-electrons per keV, which corresponds to 12.8 $\pm$ 0.8 photo-electrons primarily generated by the argon scintillation. The rest is contributed by the cross-talk and after-pulse of SiPM. In addition, we provide an experimental method to estimate the effect of crosstalk and afterpulse on light yield using dark noise data. Finally, we quantitatively give the relationship between the light yield and the decay time of the slow component of a liquid argon detector.

physics.ins-det↗

arXiv2022

Characterization of two SiPM arrays from Hamamatsu and Onsemi for liquid argon detector

Silicon photomultiplier (SiPM), a new type of photosensor, is considered a substitute for traditional photomultiplier tube (PMT) in the next generation of dark matter and neutrino detectors, especially in noble gas detectors like liquid argon. However, the design of compact SiPM arrays and their cryogenic electronics that can work in liquid argon is barely developed. Thus, two candidate SiPM arrays from Hamamatsu and Onsemi were selected to verify the feasibility and effectiveness of the design. In this work, we successfully developed a cryogenic electronics read-out system that connects and works with 1-inch 4$\times$4 SiPM arrays at 87~K. The power dissipation of amplifiers is less than 10 $μ$W/mm$^2$. Furthermore, multiply significant characteristics of both types of SiPM arrays were measured at liquid argon temperature, such as dark count rate (DCR), breakdown voltage (V${_{bd}}$), single photoelectron (SPE) performance, signal to noise ratio (SNR) and correlated signal probability.

physics.ins-det↗