arXiv subjects

T. E. Collett

Publications and source records attributed to T. E. Collett.

18 recordsLinked to original sources

arXiv2026

Euclid Quick Data Release (Q1). AstroVink: A vision transformer approach to find strong gravitational lens systems

We present AstroVink, a vision transformer classifier designed for automated identification of strong lens candidates in Euclid imaging. We build upon the DINOv2 encoder, fine tuned to distinguish between lens and non-lens galaxies. Our base model, trained on simulated strong lens systems and labelled non lenses, recovers 88 of the 110 lens candidates within the top 500 ranked candidates, corresponding to an inspection efficiency of one lens per 5.7 inspected objects in our test set. After the Q1 data release, which yielded about 500 lens candidates, we retrained the model using high confidence lens candidates and new negatives, initially flagged as potential lenses by other classifiers but rejected during visual inspection. The retrained network further improves performance, achieving recovery of all 110 systems within the same ranking and reducing the inspection effort to one lens per 4.5 inspected objects, demonstrating that incorporating real examples significantly enhances model generalisation. An analysis of training subsets revealed that the inclusion of realistic negative examples played a key role in this improvement. Finally, we applied the retrained model to the Q1 original selection of 1.08M targets, followed by a new round of Space Warps citizen science inspection and expert vetting, where we identified a total of eight Grade A and 26 Grade B new lens candidates. These results demonstrate that transformer based architectures can recover strong lens candidates with high efficiency in real Euclid data, while substantially reducing the number of candidates requiring visual inspection.

astro-ph.IM↗

arXiv2026

Euclid Quick Data Release (Q1). AgileLens: A scalable CNN-based pipeline for strong gravitational lens identification

We present an end-to-end, iterative pipeline for efficient identification of strong galaxy--galaxy lensing systems, applied to the Euclid Q1 imaging data. Starting from VIS catalogues, we reject point sources, apply a magnitude cut (I$_E$ $\leq$ 24) on deflectors, and run a pixel-level artefact/noise filter to build 96 $\times$ 96 pix cutouts; VIS+NISP colour composites are constructed with a VIS-anchored luminance scheme that preserves VIS morphology and NISP colour contrast. A VIS-only seed classifier supplies clear positives and typical impostors, from which we curate a morphology-balanced negative set and augment scarce positives. Among the six CNNs studied initially, a modified VGG16 (GlobalAveragePooling + 256/128 dense layers with the last nine layers trainable) performs best; the training set grows from 27 seed lenses (augmented to 1809) plus 2000 negatives to a colour dataset of 30,686 images. After three rounds of iterative fine-tuning, human grading of the top 4000 candidates ranked by the final model yields 441 Grade A/B candidate lensing systems, including 311 overlapping with the existing Q1 strong-lens catalogue, and 130 additional A/B candidates (9 As and 121 Bs) not previously reported. Independently, the model recovers 740 out of 905 (81.8%) candidate Q1 lenses within its top 20,000 predictions, considering off-centred samples. Candidates span I$_E$ $\simeq$ 17--24 AB mag (median 21.3 AB mag) and are redder in Y$_E$--H$_E$ than the parent population, consistent with massive early-type deflectors. Each training iteration required a week for a small team, and the approach easily scales to future Euclid releases; future work will calibrate the selection function via lens injection, extend recall through uncertainty-aware active learning, explore multi-scale or attention-based neural networks with fast post-hoc vetters that incorporate lens models into the classification.

astro-ph.GA↗

arXiv2026

Euclid Quick Data Release (Q1). The Strong Lensing Discovery Engine F -- Bright and low-redshift strong lenses

We present 72 additional galaxy-galaxy strong lenses that complement the sample discovered in the Euclid Quick Release 1 data (63.1 deg^2) of the Strong Lens Discovery Engine (SLDE) papers A-E. It is shown that previous pre-selection of potential lenses, which excluded objects from the Gaia catalogue, led to missing several bright and low-redshift strong lenses, adding more than 10% new strong lens candidates compared to the previous search. In total, the catalogue includes 38 "grade A" (confident) and 34 "grade B" (probable) candidates. These lenses are identified through a combination of two independent searches for bright nearby objects: one based on machine-learning models followed by expert visual inspection, and the other based solely on expert visual inspection, targeting objects not included in the initial machine-learning selection (a limitation identified only after extensive visual inspection). With these additional strong lens candidates, we augment the expected number of high-confidence candidates in the Euclid Wide Survey from previous forecasts to 120000. Detailed semi-automated lens modelling confirms at least 41 systems out of 72, a fraction consistent with that found in SLDE A (315 out of 488). These include: multiple edge-on disc lenses; sources with arcs near the lens centre; "red sources"; and an edge-on disk galaxy lensing a galaxy merger, producing two sets of lensed features, an Einstein ring and a doubly imaged component. The median redshift of these systems is $Δ$ z ~ 0.3 lower than that of the SLDE A sample.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1). From simulations to sky: Advancing machine-learning lens detection with real Euclid data

In the era of large-scale surveys like Euclid, machine learning has become an essential tool for identifying rare yet scientifically valuable objects, such as strong gravitational lenses. However, supervised machine-learning approaches require large quantities of labelled examples to train on, and the limited number of known strong lenses has lead to a reliance on simulations for training. A well-known challenge is that machine-learning models trained on one data domain often underperform when applied to a different domain: in the context of lens finding, this means that strong performance on simulated lenses does not necessarily translate into equally good performance on real observations. In Euclid's Quick Data Release 1 (Q1), covering 63 deg2, 500 strong lens candidates were discovered through a synergy of machine learning, citizen science, and expert visual inspection. These discoveries now allow us to quantify this performance gap and investigate the impact of training on real data. We find that a network trained only on simulations recovers up to 92% of simulated lenses with 100% purity, but only achieves 50% completeness with 24% purity on real Euclid data. By augmenting training data with real Euclid lenses and non-lenses, completeness improves by 25-30% in terms of the expected yield of discoverable lenses in Euclid DR1 and the full Euclid Wide Survey. Roughly 20% of this improvement comes from the inclusion of real lenses in the training data, while 5-10% comes from exposure to a more diverse set of non-lenses and false-positives from Q1. We show that the most effective lens-finding strategy for real-world performance combines the diversity of simulations with the fidelity of real lenses. This hybrid approach establishes a clear methodology for maximising lens discoveries in future data releases from Euclid, and will likely also be applicable to other surveys such as LSST.

astro-ph.IM↗

arXiv2025

Euclid Quick Data Release (Q1). The Strong Lensing Discovery Engine C: Finding lenses with machine learning

Strong gravitational lensing has the potential to provide a powerful probe of astrophysics and cosmology, but fewer than 1000 strong lenses have been confirmed so far. With a 0.16'' resolution covering a third of the sky, the Euclid telescope will revolutionise the identification of strong lenses, with 170 000 lenses forecasted to be discovered amongst the 1.5 billion galaxies it will observe. We present an analysis of the performance of five machine-learning models at finding strong gravitational lenses in the quick release of Euclid data (Q1) covering 63 deg2. The models have been validated by citizen scientists and expert visual inspection. We focus on the best-performing network: a fine-tuned version of the Zoobot pretrained model originally trained to classify galaxy morphologies in heterogeneous astronomical imaging surveys. Of the one million Q1 objects that Zoobot was tasked to find strong lenses within, the top 1000 ranked objects contain 122 grade A lenses (almost-certain lenses) and 41 grade B lenses (probable lenses). A deeper search with the five networks combined with visual inspection yielded 250 (247) grade A (B) lenses, of which 224 (182) are ranked in the top 20 000 by Zoobot. When extrapolated to the full Euclid survey, the highest ranked one million images will contain 75 000 grade A or B strong gravitational lenses.

astro-ph.GA↗

arXiv2025

Euclid: The Early Release Observations Lens Search Experiment

We investigated the ability of the Euclid telescope to detect galaxy-scale gravitational lenses. To do so, we performed a systematic visual inspection of the $0.7\,\rm{deg}^2$ Euclid Early Release Observations data towards the Perseus cluster using both the high-resolution $I_{\scriptscriptstyle\rm E}$ band and the lower-resolution $Y_{\scriptscriptstyle\rm E}$, $J_{\scriptscriptstyle\rm E}$, $H_{\scriptscriptstyle\rm E}$ bands. Each extended source brighter than magnitude 23 in $I_{\scriptscriptstyle\rm E}$ was inspected by 41 expert human classifiers. This amounts to $12\,086$ stamps of $10^{\prime\prime}\,\times\,10^{\prime\prime}$. We found $3$ grade A and $13$ grade B candidates. We assessed the validity of these $16$ candidates by modelling them and checking that they are consistent with a single source lensed by a plausible mass distribution. Five of the candidates pass this check, five others are rejected by the modelling, and six are inconclusive. Extrapolating from the five successfully modelled candidates, we infer that the full $14\,000\,{\rm deg}^2$ of the Euclid Wide Survey should contain $100\,000^{+70\,000}_{-30\,000}$ galaxy-galaxy lenses that are both discoverable through visual inspection and have valid lens models. This is consistent with theoretical forecasts of $170\,000$ discoverable galaxy-galaxy lenses in Euclid. Our five modelled lenses have Einstein radii in the range $0.\!\!^{\prime\prime}68\,<\,θ_\mathrm{E}\,<1.\!\!^{\prime\prime}24$, but their Einstein radius distribution is on the higher side when compared to theoretical forecasts. This suggests that our methodology is likely missing small-Einstein-radius systems. Whilst it is implausible to visually inspect the full Euclid dataset, our results corroborate the promise that Euclid will ultimately deliver a sample of around $10^5$ galaxy-scale lenses.

astro-ph.GA↗

arXiv2025

Strong Lensing by Galaxies

Strong gravitational lensing at the galaxy scale is a valuable tool for various applications in astrophysics and cosmology. The primary uses of galaxy-scale lensing are to study elliptical galaxies' mass structure and evolution, constrain the stellar initial mass function, and measure cosmological parameters. Since the discovery of the first galaxy-scale lens in the 1980s, this field has made significant advancements in data quality and modeling techniques. In this review, we describe the most common methods for modeling lensing observables, especially imaging data, as they are the most accessible and informative source of lensing observables. We then summarize the primary findings from the literature on the astrophysical and cosmological applications of galaxy-scale lenses. We also discuss the current limitations of the data and methodologies and provide an outlook on the expected improvements in both areas in the near future.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1): The Strong Lensing Discovery Engine A -- System overview and lens catalogue

We present a catalogue of 497 galaxy-galaxy strong lenses in the Euclid Quick Release 1 data (63 deg$^2$). In the initial 0.45\% of Euclid's surveys, we double the total number of known lens candidates with space-based imaging. Our catalogue includes 250 grade A candidates, the vast majority of which (243) were previously unpublished. Euclid's resolution reveals rare lens configurations of scientific value including double-source-plane lenses, edge-on lenses, complete Einstein rings, and quadruply-imaged lenses. We resolve lenses with small Einstein radii ($θ_{\rm E} < 1''$) in large numbers for the first time. These lenses are found through an initial sweep by deep learning models, followed by Space Warps citizen scientist inspection, expert vetting, and system-by-system modelling. Our search approach scales straightforwardly to Euclid Data Release 1 and, without changes, would yield approximately 7000 high-confidence (grade A or B) lens candidates by late 2026. Further extrapolating to the complete Euclid Wide Survey implies a likely yield of over 100000 high-confidence candidates, transforming strong lensing science.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1) The Strong Lensing Discovery Engine B -- Early strong lens candidates from visual inspection of high velocity dispersion galaxies

We present a search for strong gravitational lenses in Euclid imaging with high stellar velocity dispersion ($σ_ν> 180$ km/s) reported by SDSS and DESI. We performed expert visual inspection and classification of $11\,660$ \Euclid images. We discovered 38 grade A and 40 grade B candidate lenses, consistent with an expected sample of $\sim$32. Palomar spectroscopy confirmed 5 lens systems, while DESI spectra confirmed one, provided ambiguous results for another, and help to discard one. The \Euclid automated lens modeler modelled 53 candidates, confirming 38 as lenses, failing to model 9, and ruling out 6 grade B candidates. For the remaining 25 candidates we could not gather additional information. More importantly, our expert-classified non-lenses provide an excellent training set for machine learning lens classifiers. We create high-fidelity simulations of \Euclid lenses by painting realistic lensed sources behind the expert tagged (non-lens) luminous red galaxies. This training set is the foundation stone for the \Euclid galaxy-galaxy strong lensing discovery engine.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1). The Strong Lensing Discovery Engine D -- Double-source-plane lens candidates

Strong gravitational lensing systems with multiple source planes are powerful tools for probing the density profiles and dark matter substructure of the galaxies. The ratio of Einstein radii is related to the dark energy equation of state through the cosmological scaling factor $β$. However, galaxy-scale double-source-plane lenses (DSPLs) are extremely rare. In this paper, we report the discovery of four new galaxy-scale double-source-plane lens candidates in the Euclid Quick Release 1 (Q1) data. These systems were initially identified through a combination of machine learning lens-finding models and subsequent visual inspection from citizens and experts. We apply the widely-used {\tt LensPop} lens forecasting model to predict that the full \Euclid survey will discover 1700 DSPLs, which scales to $6 \pm 3$ DSPLs in 63 deg$^2$, the area of Q1. The number of discoveries in this work is broadly consistent with this forecast. We present lens models for each DSPL and infer their $β$ values. Our initial Q1 sample demonstrates the promise of \Euclid to discover such rare objects.

astro-ph.GA↗

arXiv2025

Euclid Quick Data Release (Q1). The Strong Lensing Discovery Engine E -- Ensemble classification of strong gravitational lenses: lessons for Data Release 1

The Euclid Wide Survey (EWS) is expected to identify of order $100\,000$ galaxy-galaxy strong lenses across $14\,000$deg$^2$. The Euclid Quick Data Release (Q1) of $63.1$deg$^2$ Euclid images provides an excellent opportunity to test our lens-finding ability, and to verify the anticipated lens frequency in the EWS. Following the Q1 data release, eight machine learning networks from five teams were applied to approximately one million images. This was followed by a citizen science inspection of a subset of around $100\,000$ images, of which $65\%$ received high network scores, with the remainder randomly selected. The top scoring outputs were inspected by experts to establish confident (grade A), likely (grade B), possible (grade C), and unlikely lenses. In this paper we combine the citizen science and machine learning classifiers into an ensemble, demonstrating that a combined approach can produce a purer and more complete sample than the original individual classifiers. Using the expert-graded subset as ground truth, we find that this ensemble can provide a purity of $52\pm2\%$ (grade A/B lenses) with $50\%$ completeness (for context, due to the rarity of lenses a random classifier would have a purity of $0.05\%$). We discuss future lessons for the first major Euclid data release (DR1), where the big-data challenges will become more significant and will require analysing more than $\sim300$ million galaxies, and thus time investment of both experts and citizens must be carefully managed.

astro-ph.GA↗

arXiv2025

Euclid: Finding strong gravitational lenses in the Early Release Observations using convolutional neural networks

The Early Release Observations (ERO) from Euclid have detected several new galaxy-galaxy strong gravitational lenses, with the all-sky survey expected to find 170,000 new systems, greatly enhancing studies of dark matter, dark energy, and constraints on the cosmological parameters. As a first step, visual inspection of all galaxies in one of the ERO fields (Perseus) was carried out to identify candidate strong lensing systems and compared to the predictions from Convolutional Neural Networks (CNNs). However, the entire ERO data set is too large for expert visual inspection. In this paper, we therefore extend the CNN analysis to the whole ERO data set, using different CNN architectures and methodologies. Using five CNN architectures, we identified 8,469 strong gravitational lens candidates from IE-band cutouts of 13 Euclid ERO fields, narrowing them to 97 through visual inspection, including 14 grade A and 31 grade B candidates. We present the spectroscopic confirmation of a strong gravitational lensing candidate, EUCLJ081705.61+702348.8. The foreground lensing galaxy, an early-type system at redshift z = 0.335, and the background source, a star-forming galaxy at redshift z = 1.475 with [O II] emission, are both identified. Lens modeling using the Euclid strong lens modeling pipeline reveals two distinct arcs in a lensing configuration, with an Einstein radius of 1.18 \pm 0.03 arcseconds, confirming the lensing nature of the system. These findings highlight the importance of a broad CNN search to efficiently reduce candidates, followed by visual inspection to eliminate false positives and achieve a high-purity sample of strong lenses in Euclid.

astro-ph.GA↗

arXiv2025

Euclid: A complete Einstein ring in NGC 6505

We report the discovery of a complete Einstein ring around the elliptical galaxy NGC 6505, at $z=0.042$. This is the first strong gravitational lens discovered in Euclid and the first in an NGC object from any survey. The combination of the low redshift of the lens galaxy, the brightness of the source galaxy ($I_\mathrm{E}=18.1$ lensed, $I_\mathrm{E}=21.3$ unlensed), and the completeness of the ring make this an exceptionally rare strong lens, unidentified until its observation by Euclid. We present deep imaging data of the lens from the Euclid Visible Camera (VIS) and Near-Infrared Spectrometer and Photometer (NISP) instruments, as well as resolved spectroscopy from the Keck Cosmic Web Imager (KCWI). The Euclid imaging in particular presents one of the highest signal-to-noise ratio optical/near-infrared observations of a strong gravitational lens to date. From the KCWI data we measure a source redshift of $z=0.406$. Using data from the Dark Energy Spectroscopic Instrument (DESI) we measure a velocity dispersion for the lens galaxy of $σ_\star=303\pm15\,\mathrm{kms}^{-1}$. We model the lens galaxy light in detail, revealing angular structure that varies inside the Einstein ring. After subtracting this light model from the VIS observation, we model the strongly lensed images, finding an Einstein radius of 2.5 arcsec, corresponding to $2.1\,\mathrm{kpc}$ at the redshift of the lens. This is small compared to the effective radius of the galaxy, $R_\mathrm{eff}\sim 12.3\,\mathrm{arcsec}$. Combining the strong lensing measurements with analysis of the spectroscopic data we estimate a dark matter fraction inside the Einstein radius of $f_\mathrm{DM} = (11.1_{-3.5}^{+5.4})\%$ and a stellar initial mass-function (IMF) mismatch parameter of $α_\mathrm{IMF} = 1.26_{-0.08}^{+0.05}$, indicating a heavier-than-Chabrier IMF in the centre of the galaxy.

astro-ph.GA↗

arXiv2024

Euclid: Searches for strong gravitational lenses using convolutional neural nets in Early Release Observations of the Perseus field

The Euclid Wide Survey (EWS) is predicted to find approximately 170 000 galaxy-galaxy strong lenses from its lifetime observation of 14 000 deg^2 of the sky. Detecting this many lenses by visual inspection with professional astronomers and citizen scientists alone is infeasible. Machine learning algorithms, particularly convolutional neural networks (CNNs), have been used as an automated method of detecting strong lenses, and have proven fruitful in finding galaxy-galaxy strong lens candidates. We identify the major challenge to be the automatic detection of galaxy-galaxy strong lenses while simultaneously maintaining a low false positive rate. One aim of this research is to have a quantified starting point on the achieved purity and completeness with our current version of CNN-based detection pipelines for the VIS images of EWS. We select all sources with VIS IE < 23 mag from the Euclid Early Release Observation imaging of the Perseus field. We apply a range of CNN architectures to detect strong lenses in these cutouts. All our networks perform extremely well on simulated data sets and their respective validation sets. However, when applied to real Euclid imaging, the highest lens purity is just 11%. Among all our networks, the false positives are typically identifiable by human volunteers as, for example, spiral galaxies, multiple sources, and artefacts, implying that improvements are still possible, perhaps via a second, more interpretable lens selection filtering stage. There is currently no alternative to human classification of CNN-selected lens candidates. Given the expected 10^5 lensing systems in Euclid, this implies 10^6 objects for human classification, which while very large is not in principle intractable and not without precedent.

astro-ph.IM↗

arXiv2024

Lensed Type Ia Supernova "Encore" at z=2: The First Instance of Two Multiply-Imaged Supernovae in the Same Host Galaxy

A bright ($m_{\rm F150W,AB}$=24 mag), $z=1.95$ supernova (SN) candidate was discovered in JWST/NIRCam imaging acquired on 2023 November 17. The SN is quintuply-imaged as a result of strong gravitational lensing by a foreground galaxy cluster, detected in three locations, and remarkably is the second lensed SN found in the same host galaxy. The previous lensed SN was called "Requiem", and therefore the new SN is named "Encore". This makes the MACS J0138.0$-$2155 cluster the first known system to produce more than one multiply-imaged SN. Moreover, both SN Requiem and SN Encore are Type Ia SNe (SNe Ia), making this the most distant case of a galaxy hosting two SNe Ia. Using parametric host fitting, we determine the probability of detecting two SNe Ia in this host galaxy over a $\sim10$ year window to be $\approx3\%$. These observations have the potential to yield a Hubble Constant ($H_0$) measurement with $\sim10\%$ precision, only the third lensed SN capable of such a result, using the three visible images of the SN. Both SN Requiem and SN Encore have a fourth image that is expected to appear within a few years of $\sim2030$, providing an unprecedented baseline for time-delay cosmography.

astro-ph.CO↗

arXiv2023

A search for gravitationally lensed supernovae within the Zwicky Transient Facility public survey

Strong gravitational lensing of supernovae is exceedingly rare. To date, only a handful of lensed supernovae are known. Despite this, lensed supernovae have emerged as a promising method for measuring the current expansion rate of the Universe and breaking the Hubble tension. We present an extensive search for gravitationally lensed supernovae within the Zwicky Transient Facility (ZTF) public survey, covering 15,215 transients with good light curves discovered during four years of observations. We crossmatch a catalogue of known and candidate lens galaxies with our sample and find three coincident sources, which were due to chance alignment. To search for supernovae magnified by unknown lenses, we test multiple methods suggested in the literature for the first time on real data. This includes selecting objects with extremely red colours, those that appear inconsistent with the host galaxy redshift, and those with bright absolute magnitudes inferred from the host galaxy redshift. We find a few hundred candidates, most of which are due to contamination from activate galactic nuclei, bogus detections, or unlensed supernovae. The false positive rate from these methods presents significant challenges for future surveys. In total, 132 unique transients were identified across all of our selection methods that required detailed manual rejection, which would be infeasible for larger samples. Overall, we do not find any compelling candidates for lensed supernovae, which is broadly consistent with previous estimates for the rate of lensed supernovae from the ZTF public survey alone and the number expected to pass the selection cuts we apply.

astro-ph.HE↗

arXiv2020

Is every strong lens model unhappy in its own way? Uniform modelling of a sample of 13 quadruply+ imaged quasars

Strong-gravitational lens systems with quadruply-imaged quasars (quads) are unique probes to address several fundamental problems in cosmology and astrophysics. Although they are intrinsically very rare, ongoing and planned wide-field deep-sky surveys are set to discover thousands of such systems in the next decade. It is thus paramount to devise a general framework to model strong-lens systems to cope with this large influx without being limited by expert investigator time. We propose such a general modelling framework (implemented with the publicly available software Lenstronomy) and apply it to uniformly model three-band Hubble Space Telescope Wide Field Camera 3 images of 13 quads. This is the largest uniformly modelled sample of quads to date and paves the way for a variety of studies. To illustrate the scientific content of the sample, we investigate the alignment between the mass and light distribution in the deflectors. The position angles of these distributions are well-aligned, except when there is strong external shear. However, we find no correlation between the ellipticity of the light and mass distributions. We also show that the observed flux-ratios between the images depart significantly from the predictions of simple smooth models. The departures are strongest in the bluest band, consistent with microlensing being the dominant cause in addition to millilensing. Future papers will exploit this rich dataset in combination with ground based spectroscopy and time delays to determine quantities such as the Hubble constant, the free streaming length of dark matter, and the normalization of the initial stellar mass function.

astro-ph.GA↗

arXiv2018

The STRong lensing Insights into the Dark Energy Survey (STRIDES) 2016 follow-up campaign. I. Overview and classification of candidates selected by two techniques

The primary goals of the STRong lensing Insights into the Dark Energy Survey (STRIDES) collaboration are to measure the dark energy equation of state parameter and the free streaming length of dark matter. To this aim, STRIDES is discovering strongly lensed quasars in the imaging data of the Dark Energy Survey and following them up to measure time delays, high resolution imaging, and spectroscopy sufficient to construct accurate lens models. In this paper, we first present forecasts for STRIDES. Then, we describe the STRIDES classification scheme, and give an overview of the Fall 2016 follow-up campaign. We continue by detailing the results of two selection methods, the Outlier Selection Technique and a morphological algorithm, and presenting lens models of a system, which could possibly be a lensed quasar in an unusual configuration. We conclude with the summary statistics of the Fall 2016 campaign. Including searches presented in companion papers (Anguita et al.; Ostrovski et al.), STRIDES followed up 117 targets identifying 7 new strongly lensed systems, and 7 nearly identical quasars (NIQs), which could be confirmed as lenses by the detection of the lens galaxy. 76 candidates were rejected and 27 remain otherwise inconclusive, for a success rate in the range 6-35\%. This rate is comparable to that of previous searches like SQLS even though the parent dataset of STRIDES is purely photometric and our selection of candidates cannot rely on spectroscopic information.

astro-ph.CO↗