arXiv subjects

T. Fusco

Publications and source records attributed to T. Fusco.

At least 55 records · Page 3Linked to original sources

arXiv2019

Identifying optical turbulence profiles for realistic tomographic error in adaptive optics

For extremely large telescopes, adaptive optics will be required to correct the Earth's turbulent atmosphere. The performance of tomographic adaptive optics is strongly dependent on the vertical distribution (profile) of this turbulence. An important way in which this manifests is the tomographic error, arising from imperfect measurement and reconstruction of the turbulent phase at altitude. Conventionally, a small number of reference profiles are used to obtain this error in simulation however these profiles are not constructed to be representative in terms of tomographic error. It is therefore unknown whether these simulations are providing realistic performance estimates. Here, we employ analytical adaptive optics simulation that drastically reduces computation times to compute tomographic error for 10 691 measurements of the turbulence profile gathered by the Stereo-SCIDAR instrument at ESO Paranal. We assess for the first time the impact of the profile on tomographic error in a statistical manner. We find, in agreement with previous work, that the tomographic error is most directly linked with the distribution of turbulence into discrete, stratified layers. Reference profiles are found to provide mostly higher tomographic error than expected, which we attribute to the fact that these profiles are primarily composed of averages of many measurements resulting in unrealistic, continuous distributions of turbulence. We propose that a representative profile should be defined with respect to a particular system, and that as such simulations with a large statistical sample of profiles must be an important step in the design process.

astro-ph.IM↗

arXiv2019

PRIME: Psf Reconstruction and Identification for Multiple sources characterization Enhancement. Application to Keck NIRC2 imager

In order to enhance accuracy of astrophysical estimates obtained on Adaptive-optics (AO) images, such as photometry and astrometry, we investigate a new concept to constrain the Point Spread Function (PSF) model called PSF Reconstruction and Identification for Multi-sources characterization Enhancement (PRIME), that handles jointly the science image and the AO control loop data. We present in this paper the concept of PRIME and validate it on Keck II telescope NIRC2 images. We show that by calibrating the PSF model over the scientific image, PSF reconstruction achieves 1\% and 3 mas of accuracy on respectively the Strehl-ratio and the PSF full width at half maximum. We show on NIRC2 binary images that PRIME is sufficiently robust to noise to retain photometry and astrometry precision below 0.005 mag and 100$μ$as on a $m_H=$ 14 mag object. Finally, we also validate that PRIME performs a PSF calibration on the triple system Gl569BAB which provides a separation of 66.73$\pm 1.02$ and a differential photometry of 0.538$\pm 0.048$, compared to the reference values obtained with the extracted PSF which are 66.76 mas $\pm$ 0.94 and 0.532 mag $\pm$ 0.041.

astro-ph.IM↗

arXiv2019

The shape of (7) Iris as evidence of an ancient large impact?

Asteroid (7) Iris is an ideal target for disk-resolved imaging owing to its brightness (V$\sim$7-8) and large angular size of 0.33 arcsec during its apparitions. Iris is believed to belong to the category of large unfragmented asteroids that avoided internal differentiation, implying that its current shape and topography may record the first few 100 Myr of the solar system's collisional evolution. We recovered information about the shape and surface topography of Iris from disk-resolved VLT/SPHERE/ZIMPOL images acquired in the frame of our ESO large program. We used the All-Data Asteroid Modeling (ADAM) shape reconstruction algorithm to model the 3D shape of Iris, using optical disk-integrated data and disk-resolved images from SPHERE as inputs. We analyzed the SPHERE images to infer the asteroid's global shape and the morphology of its main craters. We present the volume-equivalent diameter D$_{\rm eq}$=214$\pm$5 km, and bulk density $ρ$=2.7$\pm$0.3 g cm$^{-3}$ of Iris. Its shape appears to be consistent with that of an oblate spheroid with a large equatorial excavation. We identified eight putative surface features 20--40 km in diameter detected at several epochs, which we interpret as impact craters. Craters on Iris have depth-to-diameter ratios that are similar to those of analogous 10 km craters on Vesta. The bulk density of Iris is consistent with that of its meteoritic analog, namely LL ordinary chondrites. Considering the absence of a collisional family related to Iris and the number of large craters on its surface, we suggest that its equatorial depression may be the remnant of an ancient (at least 3 Gyr) impact. Iris's shape further opens the possibility that large planetesimals formed as almost perfect oblate spheroids. Finally, we attribute the difference in crater morphology between Iris and Vesta to their different surface gravities.

astro-ph.EP↗

arXiv2019

Closing the gap between Earth-based and interplanetary mission observations: Vesta seen by VLT/SPHERE

Context. Over the past decades, several interplanetary missions have studied small bodies in situ, leading to major advances in our understanding of their geological and geophysical properties. These missions, however, have had a limited number of targets. Among them, the NASA Dawn mission has characterised in detail the topography and albedo variegation across the surface of asteroid (4) Vesta down to a spatial resolution of approximately 20 m/pixel scale. Aims. Here our aim was to determine how much topographic and albedo information can be retrieved from the ground with VLT/SPHERE in the case of Vesta, having a former space mission (Dawn) providing us with the ground truth that can be used as a benchmark. Methods. We observed Vesta with VLT/SPHERE/ZIMPOL as part of our ESO large programme (ID 199.C-0074) at six different epochs, and deconvolved the collected images with a parametric point spread function (PSF). We then compared our images with synthetic views of Vesta generated from the 3D shape model of the Dawn mission, on which we projected Vesta's albedo information. Results. We show that the deconvolution of the VLT/SPHERE images with a parametric PSF allows the retrieval of the main topographic and albedo features present across the surface of Vesta down to a spatial resolution of approximately 20-30 km. Contour extraction shows an accuracy of approximately 1 pixel (3.6 mas). The present study provides the very first quantitative estimate of the accuracy of ground-based adaptive-optics imaging observations of asteroid surfaces. Conclusions. In the case of Vesta, the upcoming generation of 30-40m telescopes (ELT, TMT, GMT) should in principle be able to resolve all of the main features present across its surface, including the troughs and the north-south crater dichotomy, provided that they operate at the diffraction limit.

astro-ph.EP↗

arXiv2019

Turbulent and AO corrected Point-Spread-Function as convolutive orders of the phase Power-Spectral-Density

Ground-based astronomy is severely limited by the atmospheric turbulence, resulting in a large Point-Spread-Function (PSF) and poor imaging resolution. Even imaging with Adaptive Optics (AO) cannot completely correct the aberrated wavefront, and a residual turbulence still corrupts the observation. Thus the consequences of the turbulence on the PSF is of first interest when building any ground-based telescope. The Power Spectral Density (PSD) of a spatially stationary turbulent phase carries all the information needed for describing the long-exposure PSF. We then develop an analytical description of the long-exposure PSF as a series expansion of the aberrated phase PSD. Our description of the PSF given the PSD of the phase is a simple theoretical way to describe the impact of turbulence on the PSF. We also show accordance with previous papers when restricting our model to its first expansion order. Finally we derive applications of our formula to some particular cases, such as Kolmogorov or von-Kármán models, or the AO correction impact on the PSF.

astro-ph.IM↗

arXiv2019

A new calibration strategy for adaptive telescopes with pyramid WFS

Several telescopes include large Deformable Mirrors (DM) located directly inside the telescope. These adaptive telescopes trigger new constraints for the calibration of the Adaptive Optics (AO) systems as they usually offer no access to an artificial calibration source for the interaction matrix measurement. Moreover, the optical propagation between the DM and the Wave-Front Sensor (WFS) may evolve during the operation, resulting in mis-registrations that highly affect the AO performance and thus the scientific observation. They have to be measured and compensated, for instance by updating the calibration. A new strategy consists of estimating the mis-registrations and injecting them into synthetic models to generate noise-free interaction matrices. This pseudo-synthetic approach is the baseline for the Adaptive Optics Facility working with a Shack-Hartmann WFS and seems particularly suited for the future Extremely Large Telescope as the calibration will have to be regularly updated, for a large numbers of actuators. In this paper, the feasibility of a pseudo synthetic calibration with Pyramid WFS at the Large Binocular Telescope (LBT) is investigated. A synthetic model of the LBT AO systems is developed, and the procedure to adjust the mis-registrations parameters is introduced, extracting them from an experimental interaction matrix. We successfully tested an interaction matrix generated from the model on the real system in high-order AO mode. We recorded a slightly better performance with respect to the experimental one. This work demonstrates that a high accuracy calibration can be obtained using the pseudo synthetic approach with pyramid WFS.

astro-ph.IM↗

arXiv2019

The homogeneous internal structure of CM-like asteroid (41) Daphne

Context. CM-like asteroids (Ch and Cgh classes) are a major population within the broader C-complex, encompassing about 10% of the mass of the main asteroid belt. Their internal structure has been predicted to be homogeneous, based on their compositional similarity as inferred from spectroscopy (Vernazza et al., 2016, AJ 152, 154) and numerical modeling of their early thermal evolution (Bland & Travis, 2017, Sci. Adv. 3, e1602514). Aims. Here we aim to test this hypothesis by deriving the density of the CM-like asteroid (41) Daphne from detailed modeling of its shape and the orbit of its small satellite. Methods. We observed Daphne and its satellite within our imaging survey with the Very Large Telescope extreme adaptive-optics SPHERE/ZIMPOL camera (ID 199.C-0074, PI P. Vernazza) and complemented this data set with earlier Keck/NIRC2 and VLT/NACO observations. We analyzed the dynamics of the satellite with our Genoid meta-heuristic algorithm. Combining our high-angular resolution images with optical lightcurves and stellar occultations, we determine the spin period, orientation, and 3-D shape, using our ADAM shape modeling algorithm. Results. The satellite orbits Daphne on an equatorial, quasi-circular, prograde orbit, like the satellites of many other large main-belt asteroids. The shape model of Daphne reveals several large flat areas that could be large impact craters. The mass determined from this orbit combined with the volume computed from the shape model implies a density for Daphne of 1.77+/-0.26 g/cm3 (3 σ). This density is consistent with a primordial CM-like homogeneous internal structure with some level of macroporosity (~17%). Conclusions. Based on our analysis of the density of Daphne and 75 other Ch/Cgh-type asteroids gathered from the literature, we conclude that the primordial internal structure of the CM parent bodies was homogeneous.

astro-ph.EP↗

arXiv2018

Overview of the European Extremely Large Telescope and its instrument suite

The European Extremely Large Telescope will see first lights by the end of 2024. With a diameter of almost 40 meters, it will be the biggest optical telescope ever built from the ground. The ELT will open a brand new window in a sensitivity / spatial angular resolution parameter space. To take the full benefit of the scientific potential of this giant, all the instruments will be equipped with Adaptive Optics (AO), providing the sharpest images. This paper provides a quick overview of the AO capabilities of the future instruments to be deployed at the ELT, highlight some of the expected performance and describe a couple of technical challenges that are still to tackle for an optimal scientific use. This paper has been presented at the "Societe Francaise d'Astronomie et Astrophysique" symposium in Bordeaux 2018, it is then naturally biased toward the French contribution for the ELT.

astro-ph.IM↗

arXiv2018

Post conjunction detection of $β$ Pictoris b with VLT/SPHERE

With an orbital distance comparable to that of Saturn in the solar system, \bpic b is the closest (semi-major axis $\simeq$\,9\,au) exoplanet that has been imaged to orbit a star. Thus it offers unique opportunities for detailed studies of its orbital, physical, and atmospheric properties, and of disk-planet interactions. With the exception of the discovery observations in 2003 with NaCo at the Very Large Telescope (VLT), all following astrometric measurements relative to \bpic have been obtained in the southwestern part of the orbit, which severely limits the determination of the planet's orbital parameters. We aimed at further constraining \bpic b orbital properties using more data, and, in particular, data taken in the northeastern part of the orbit. We used SPHERE at the VLT to precisely monitor the orbital motion of beta \bpic b since first light of the instrument in 2014. We were able to monitor the planet until November 2016, when its angular separation became too small (125 mas, i.e., 1.6\,au) and prevented further detection. We redetected \bpic b on the northeast side of the disk at a separation of 139\,mas and a PA of 30$^{\circ}$ in September 2018. The planetary orbit is now well constrained. With a semi-major axis (sma) of $a = 9.0 \pm 0.5$ au (1 $σ$), it definitely excludes previously reported possible long orbital periods, and excludes \bpic b as the origin of photometric variations that took place in 1981. We also refine the eccentricity and inclination of the planet. From an instrumental point of view, these data demonstrate that it is possible to detect, if they exist, young massive Jupiters that orbit at less than 2 au from a star that is 20 pc away.

astro-ph.EP↗

arXiv2018

(16) Psyche: A mesosiderite-like asteroid?

Asteroid (16) Psyche is the target of the NASA Psyche mission. It is considered one of the few main-belt bodies that could be an exposed proto-planetary metallic core and that would thus be related to iron meteorites. Such an association is however challenged by both its near- and mid-infrared spectral properties and the reported estimates of its density. Here, we aim to refine the density of (16) Psyche to set further constraints on its bulk composition and determine its potential meteoritic analog. We observed (16) Psyche with ESO VLT/SPHERE/ZIMPOL as part of our large program (ID 199.C-0074). We used the high angular resolution of these observations to refine Psyche's three-dimensional (3D) shape model and subsequently its density when combined with the most recent mass estimates. In addition, we searched for potential companions around the asteroid. We derived a bulk density of 3.99\,$\pm$\,0.26\,g$\cdot$cm$^{-3}$ for Psyche. While such density is incompatible at the 3-sigma level with any iron meteorites ($\sim$7.8\,g$\cdot$cm$^{-3}$), it appears fully consistent with that of stony-iron meteorites such as mesosiderites (density $\sim$4.25\,$\cdot$cm$^{-3}$). In addition, we found no satellite in our images and set an upper limit on the diameter of any non-detected satellite of 1460\,$\pm$\,200}\,m at 150\,km from Psyche (0.2\%\,$\times$\,R$_{Hill}$, the Hill radius) and 800\,$\pm$\,200\,m at 2,000\,km (3\%\,$\times$\,$R_{Hill}$). Considering that the visible and near-infrared spectral properties of mesosiderites are similar to those of Psyche, there is merit to a long-published initial hypothesis that Psyche could be a plausible candidate parent body for mesosiderites.

astro-ph.EP↗

arXiv2018

Focal plane $C_n^2(h)$ profiling based on single conjugate adaptive optics compensated images

Knowledge of the atmospheric turbulence in the telescope line-of-sight is crucial for wide-field observations assisted by adaptive optics (AO), for which the Point Spread Function (PSF) becomes strongly elongated due to the anisoplanatism effect. This one must be modelled accurately to extrapolate the PSF anywhere across the Field of view (FOV) and improve the science exploitation. However, anisoplanatism is a function of the Cn2(h) profile, that is not directly accessible from single conjugate AO telemetry. One may rely on external profilers, but recent studies have highlighted more than 10% of discrepancies with AO internal measurements, while we aim better than 1% of accuracy for PSF modelling. To tackle this existing limitation, we present the Focal plane profiling (FPP), as a $C_n^2(h)$ profiling method that relies on post-AO focal plane images. We demonstrate such an approach complies with a 1%-level of accuracy on the $C_n^2(h)$ estimation and establish how this accuracy varies regarding the calibration stars magnitudes and positions in the field. We highlight that photometry and astrometry errors due to PSF mis-modelling reaches respectively 1% and 50μas using FPP on a Keck baseline, with a preliminary calibration using a star of magnitude H=14 at 20". We also validate this concept using Canadas NRC-Herzberg HENOS testbed images in comparing FPP retrieval with alternative $C_n^2(h)$ measurements on HeNOS. The FPP approach allows to profile the $C_n^2(h)$ using the SCAO systems and improve significantly the PSF characterisation. Such a methodology is also ELT-size compliant and will be extrapolated to tomographic systems in a near future.

astro-ph.IM↗

arXiv2018

SPHERE / ZIMPOL high resolution polarimetric imager. I. System overview, PSF parameters, coronagraphy, and polarimetry

We describe the Zurich Imaging Polarimeter (ZIMPOL), the visual focal plane subsystem of the SPHERE "VLT planet finder", which pushes the limits of current AO systems to shorter wavelengths, higher spatial resolution, and much improved polarimetric performance. We provide new benchmarks for the performance of high contrast instruments, in particular for polarimetric differential imaging. We have analyzed SPHERE/ZIMPOL point spread functions and measure the peak surface brightness, the encircled energy, and the full width half maximum (FWHM) for different wavelengths, atmospheric conditions, star brightness, and instrument modes. Coronagraphic images are described and analized and the performance for different coronagraphs is compared with tests for the binary alpha Hyi with a separation of 92 mas and a contrast of 6 mag. For the polarimetric mode we made the instrument calibrations using zero polarization and high polarization standard stars and here we give a recipe for the absolute calibration of polarimetric data. The data show a small <1 mas but disturbing differential polarimetric beam shifts, which can be explained as Goos-Hähnchen shifts from the inclined mirrors, and we discuss how to correct this effect. The polarimetric sensitivity is investigated with non-coronagraphic and deep, coronagraphic observations of the dust scattering around the symbiotic Mira variable R Aqr. SPHERE/ZIMPOL achieves imaging performances in the visual range with unprecedented characteristics, in particular very high spatial resolution and very high polarimetric contrast. This instrument opens up many new research opportunities for the detailed investigation of circumstellar dust, in scattered and therefore polarized light, for the investigation of faint companions, and for the mapping of circumstellar Halpha emission.

astro-ph.IM↗

arXiv2018

Discovery of a planetary-mass companion within the gap of the transition disk around PDS 70

Young circumstellar disks are of prime interest to understand the physical and chemical conditions under which planet formation takes place. Only very few detections of planet candidates within these disks exist, and most of them are currently suspected to be disk features. In this context, the transition disk around the young star PDS 70 is of particular interest, due to its large gap identified in previous observations, indicative of ongoing planet formation. We aim to search for the presence of planets and search for disk structures indicative for disk-planet interactions and other evolutionary processes. We analyse new and archival near-infrared (NIR) images of the transition disk PDS 70 obtained with the VLT/SPHERE, VLT/NaCo and Gemini/NICI instruments in polarimetric differential imaging (PDI) and angular differential imaging (ADI) modes. We detect a point source within the gap of the disk at about 195 mas (about 22 au) projected separation. The detection is confirmed at five different epochs, in three filter bands and using different instruments. The astrometry results in an object of bound nature, with high significance. The comparison of the measured magnitudes and colours to evolutionary tracks suggests that the detection is a companion of planetary mass. We confirm the detection of a large gap of about 54 au in size within the disk in our scattered light images, and detect a signal from an inner disk component. We find that its spatial extent is very likely smaller than about 17 au in radius. The images of the outer disk show evidence of a complex azimuthal brightness distribution which may in part be explained by Rayleigh scattering from very small grains. Future observations of this system at different wavelengths and continuing astrometry will allow us to test theoretical predictions regarding planet-disk interactions, planetary atmospheres and evolutionary models.

astro-ph.EP↗

arXiv2018

Orbital and atmospheric characterization of the planet within the gap of the PDS 70 transition disk

Aims: We aim to characterize the orbital and atmospheric properties of PDS 70 b, which was first identified on May 2015 in the course of the SHINE survey with SPHERE, the extreme adaptive-optics instrument at the VLT. Methods: We obtained new deep SPHERE/IRDIS imaging and SPHERE/IFS spectroscopic observations of PDS 70 b. The astrometric baseline now covers 6 years which allows us to perform an orbital analysis. For the first time, we present spectrophotometry of the young planet which covers almost the entire near-infrared range (0.96 to 3.8 micrometer). We use different atmospheric models covering a large parameter space in temperature, log(g), chemical composition, and cloud properties to characterize the properties of the atmosphere of PDS 70 b. Results: PDS 70 b is most likely orbiting the star on a circular and disk coplanar orbit at ~22 au inside the gap of the disk. We find a range of models that can describe the spectrophotometric data reasonably well in the temperature range between 1000-1600 K and log(g) no larger than 3.5 dex. The planet radius covers a relatively large range between 1.4 and 3.7 R_jupiter with the larger radii being higher than expected from planet evolution models for the age of the planet of 5.4 Myr. Conclusions: This study provides a comprehensive dataset on the orbital motion of PDS 70 b, indicating a circular orbit and a motion coplanar with the disk. The first detailed spectral energy distribution of PDS 70 b indicates a temperature typical for young giant planets. The detailed atmospheric analysis indicates that a circumplanetary disk may contribute to the total planet flux.

astro-ph.EP↗

arXiv2018

Performance of the extreme-AO instrument VLT/SPHERE and dependence on the atmospheric conditions

SPHERE is the high-contrast exoplanet imager and spectrograph installed at the Unit Telescope 3 of the Very Large Telescope. After more than two years of regular operations, we analyse statistically the performance of the adaptive optics system and its dependence on the atmospheric conditions above the Paranal observatory, as measured by the suite of dedicated instruments which are part of the Astronomical Site Monitor and as estimated by the SPHERE real-time calculator. We also explain how this information can be used to schedule the observations in order to yield the best data quality and to guide the astronomer when processing his/her data.

astro-ph.IM↗

arXiv2018

Speckle lifetime in XAO coronagraphic images: temporal evolution of SPHERE coronagraphic images

The major source of noise in high-contrast imaging is the presence of slowly evolving speckles that do not average with time. The temporal stability of the point-spread-function (PSF) is therefore critical to reach a high contrast with extreme adaptive optics (xAO) instruments. Understanding on which timescales the PSF evolves and what are the critical parameters driving the speckle variability allow to design an optimal observing strategy and data reduction technique to calibrate instrumental aberrations and reveal faint astrophysical sources. We have obtained a series of 52 min, AO-corrected, coronagraphically occulted, high-cadence (1.6Hz), H-band images of the star HR 3484 with the SPHERE (Spectro-Polarimeter High-contrast Exoplanet REsearch instrument on the VLT. This is a unique data set from an xAO instrument to study its stability on timescales as short as one second and as long as several tens of minutes. We find different temporal regimes of decorrelation. We show that residuals from the atmospheric turbulence induce a fast, partial decorrelation of the PSF over a few seconds, before a transition to a regime with a linear decorrelation with time, at a rate of several tens parts per million per second (ppm/s). We analyze the spatial dependence of this decorrelation, within the well-corrected radius of the adaptive optics system and show that the linear decorrelation is faster at short separations. Last, we investigate the influence of the distance to the meridian on the decorrelation.

astro-ph.IM↗

arXiv2018

The adaptive optics modes for HARMONI: from Classical to Laser Assisted Tomographic AO

HARMONI is a visible and NIR integral field spectrograph, providing the E-ELT's core spectroscopic capability at first light. HARMONI will work at the diffraction limit of the E-ELT, thanks to a Classical and a Laser Tomographic AO system. In this paper, we present the system choices that have been made for these SCAO and LTAO modules. In particular, we describe the strategy developed for the different Wave-Front Sensors: pyramid for SCAO, the LGSWFS concept, the NGSWFS path, and the truth sensor capabilities. We present first potential implementations. And we asses the first system performance.

astro-ph.IM↗

arXiv2018

Off-axis point spread function characterisation in laser-guide star adaptive optics systems

Adaptive optics (AO) restore the angular resolution of ground-based telescopes, but at the cost of delivering a time- and space-varying point spread function (PSF) with a complex shape. PSF knowledge is crucial for breaking existing limits on the measured accuracy of photometry and astrometry in science observations. In this paper, we concentrate our analyses on anisoplanatism signature only onto PSF: for large-field observations (20") with single- conjugated AO, PSFs are strongly elongated due to anisoplanatism that manifests itself as three different terms for Laser-guide star (LGS) systems: angular, focal and tilt. We propose a generalized model that relies on a point-wise decomposition of the phase and encompasses the non-stationarity of LGS systems. We demonstrate it is more accurate and less computationally demanding than existing models: it agrees with end-to-end physical-optics simulations to within 0.1% of PSF measurables, such as Strehl-ratio, FWHM and fraction of variance unexplained.Secondly, we study off-axis PSF modelling is with respect to $C_n^2(h)$ profile (heights and fractional weights). For 10m class telescope, PSF morphology is estimated at 1% level as long as we model the atmosphere with at least 7 layers whose heights and weights are known respectively with 200m and 10% precision. As a verification test we used the Canada's NRC-Herzberg HeNOS testbed data, featuring four lasers. We highlight capability of retrieving off-axis PSF characteristics within 10% of fraction of variance unexplained, which complies with the expected range from the sensitivity analysis. Our new off-axis PSF modelling method lays the ground-work for testing on-sky in the near future.

astro-ph.IM↗