arXiv subjects
Publications and source records attributed to T. Gershon.
Silicon detectors operating in the harsh mixed-hadron radiation environment of modern high-energy physics experiments suffer progressive bulk damage, manifesting macroscopically as a steady rise in leakage current.
Heavy-flavour physics is an essential component of the particle-physics programme, offering critical tests of the Standard Model and far-reaching sensitivity to physics beyond it. Experiments such as LHCb, Belle II, and BESIII drive progress in the field, along with contributions from ATLAS and CMS. The LHCb Upgrade II and upgraded Belle II experiments will provide unique and highly sensitive measurements for decades, playing a key role in the searches for new physics. Future facilities with significant heavy-flavour capabilities will further expand these opportunities. We advocate for a European Strategy that fully supports Upgrade II of LHCb and an upgrade of Belle II, along with their subsequent exploitation. Additionally, we support a long-term plan that fully integrates flavour physics in an $e^+e^-$ collider to run as a $Z$ factory.
This paper reports world averages of measurements of $b$-hadron, $c$-hadron, and $τ$-lepton properties obtained by the Heavy Flavour Averaging Group using results available before April 2021. In rare cases, significant results obtained several months later are also used. For the averaging, common input parameters used in the various analyses are adjusted (rescaled) to common values, and known correlations are taken into account. The averages include branching fractions, lifetimes, neutral meson mixing parameters, CP violation parameters, parameters of semileptonic decays, and Cabibbo-Kobayashi-Maskawa matrix elements.
The Large Hadron Collider beauty (LHCb) detector is designed to detect decays of b- and c- hadrons for the study of CP violation and rare decays. At the end of the LHC Run 2, many of the LHCb measurements remained statistically dominated. In order to increase the trigger yield for purely hadronic channels, the hardware trigger will be removed, and the detector will be read out at 40 MHz. This, in combination with the five-fold increase in luminosity, requires radical changes to LHCb's electronics, and, in some cases, the replacement of entire sub-detectors with state-of-the-art detector technologies. The Vertex Locator (VELO) surrounding the interaction region is used to reconstruct the collision points (primary vertices) and decay vertices of long-lived particles (secondary vertices). The upgraded VELO will be composed of 52 modules placed along the beam axis divided into two retractable halves. The modules will each be equipped with 4 silicon hybrid pixel tiles, each read out by 3 VeloPix ASICs. The total output data rate anticipated for the whole detector will be around 1.6 Tbit/s. The highest occupancy ASICs will have pixel hit rates of approximately 900 Mhit/s, with the corresponding output data rate of 15 Gbit/s. The LHCb upgrade detector will be the first detector to read out at the full LHC rate of 40 MHz. The VELO upgrade will utilize the latest detector technologies to read out at this rate while maintaining the required radiation-hard profile and minimizing the detector material.
Weak decays of the vector $D^{*0}$ and $B_{(s)}^{*0}$ mesons to the $\mumu$ final state provide novel potential to test the Standard Model of particle physics. Such processes have extremely small branching fractions as the vector mesons are able to decay through electromagnetic and (for the $D^{*0}$ meson) strong interactions. Nonetheless, the production of copious quantities of these particles in LHC collisions, and the ability to exploit experimental techniques that can suppress background to low levels, provides good potential to reach interesting sensitivity. The possibility to reconstruct these processes as part of the decay chain of $B^-$ or $B_c^+$ mesons appears particularly attractive due to the clean experimental signature of the displaced vertex. Indeed, published LHCb data on $\Bm \to \pim\mumu$ decays already implies a stringent limit on the branching fraction of $D^{*0} \to μ^+μ^-$. Estimates are made on the achievable sensitivity to $D^{*0} \to μ^+μ^-$ and $B_{(s)}^{*0} \to μ^+μ^-$ decays with the LHCb experiment.
The TORCH time-of-flight detector is designed to provide a 15 ps timing resolution for charged particles, resulting in $π$/$K$ particle identification up to 10 GeV/c momentum over a 10 m flight path. Cherenkov photons, produced in a quartz plate of 10 mm thickness, are focused onto an array of micro-channel plate photomultipliers (MCP-PMTs) which measure the photon arrival times and spatial positions. A half-scale ($660\times1250\times10$ mm$^3$) TORCH demonstrator module has been tested in an 8 GeV/c mixed proton-pion beam at CERN. Customised square MCP-PMTs of active area $53\times53$ mm$^2$ and granularity $64\times64$ pixels have been employed, which have been developed in collaboration with an industrial partner. The single-photon timing performance and photon yields have been measured as a function of beam position in the radiator, giving measurements which are consistent with expectations. The expected performance of TORCH for high luminosity running of the LHCb Upgrade II has been simulated.
This paper reports world averages of measurements of $b$-hadron, $c$-hadron, and $τ$-lepton properties obtained by the Heavy Flavor Averaging Group using results available through September 2018. In rare cases, significant results obtained several months later are also used. For the averaging, common input parameters used in the various analyses are adjusted (rescaled) to common values, and known correlations are taken into account. The averages include branching fractions, lifetimes, neutral meson mixing parameters, CP violation parameters, parameters of semileptonic decays, and Cabibbo-Kobayashi-Maskawa matrix elements.
The Heavy Flavor Averaging Group provides this Letter of Interest (LOI) as input to the Snowmass 2021 Particle Physics Community Planning Exercise organized by the Division of Particles and Fields of the American Physical Society. Research in heavy flavor physics is an essential component of particle physics, both within and beyond the Standard Model. To fully realize the potential of this field, we advocate strong support within the U.S. high energy physics program for ongoing and future experimental and theory research in heavy flavor physics.
The angle $γ$ of the Cabibbo--Kobayashi--Maskawa unitarity triangle is a benchmark parameter of the Standard Model of particle physics. A method to determine $γ$ from $B^{\pm} \to D K^{\pm}$ with subsequent $D \to K_{\rm S}^0π^+π^-$ or similar multibody decays has been proven to provide good sensitivity. We review the first discussions on the use of this technique, and its impact subsequently. We propose that this approach should be referred to as the BPGGSZ method.
The TORCH time-of-flight detector will provide particle identification between 2-10 GeV/c momentum over a flight distance of 10 m, and is designed for large-area coverage, up to 30 m^2. A 15 ps time-of-flight resolution per incident particle is anticipated by measuring the arrival times from Cherenkov photons produced in a synthetic fused silica radiator plate of 10 mm thickness. Customised Micro-Channel Plate Photomultiplier Tube (MCP-PMT) photon detectors of 53 x 53 mm^2 active area with a 64 x 64 granularity have been developed with industrial partners. Test-beam studies using both a small-scale TORCH demonstrator and a half-length TORCH module are presented. The desired timing resolution of 70 ps per single photon is close to being achieved.
TORCH is a time-of-flight detector designed to perform particle identification over the momentum range 2$-$10 GeV/c for a 10 m flight path. The detector exploits prompt Cherenkov light produced by charged particles traversing a quartz plate of 10 mm thickness. Photons are then trapped by total internal reflection and directed onto a detector plane instrumented with customised position-sensitive Micro-Channel Plate Photo-Multiplier Tube (MCP-PMT) detectors. A single-photon timing resolution of 70 ps is targeted to achieve the desired separation of pions and kaons, with an expectation of around 30 detected photons per track. Studies of the performance of a small-scale TORCH demonstrator with a radiator of dimensions 120 $\times$ 350 $\times$ 10 mm$^3$ have been performed in two test-beam campaigns during November 2017 and June 2018. Single-photon time resolutions ranging from 104.3 ps to 114.8 ps and 83.8 ps to 112.7 ps have been achieved for MCP-PMTs with granularity 4 $\times$ 64 and 8 $\times$ 64 pixels, respectively. Photon yields are measured to be within $\sim$10% and $\sim$30% of simulation, respectively. Finally, the outlook for future work with planned improvements is presented.
We propose a novel method to measure flavor-oscillations and charge-parity (CP) violation in charm mixing. The approach uses multibody charm decays, such as $D^0\to K_S^0π^+π^-$, and avoids the need for a fit of the decay amplitudes while suppressing biases due to nonuniform signal-reconstruction efficiencies as functions of phase space and decay time. Data are partitioned in decay-time and Dalitz-plot regions (bins). The Dalitz-plot bins are symmetric with respect to the principal bisector and chosen to ensure nearly constant values of the strong-interaction phases in each. The ratios of signal yields observed in each symmetric bin pair are fit as functions of decay time, using independent auxiliary measurements of the strong-interaction phases as constraints, to determine the relevant physics parameters. Simulation shows that this approach improves the sensitivity to the normalized charm-eigenstate mass difference by 35% with respect to existing model-independent methods. In addition, we introduce a parametrization of oscillation and CP-violation effects in charm mixing that has attractive statistical properties and may find wider applicability.
The recent discovery, by the LHCb collaboration, of the $Ξ_{cc}^{++}$ doubly charmed baryon, has renewed interest in the spectroscopy of doubly heavy hadrons. Experimentally, however, searches for such states appear highly challenging. The reconstructed final states tend to involve multiple heavy flavoured (beauty or charm) hadrons, so the yield for any exclusive decay mode will be suppressed to unobservably low levels by the product of several branching fractions, each of which is typically $10^{-3}$--$10^{-2}$. Noting that decays of double beauty hadrons are the only possible source of $B_c^-$ mesons that are displaced from the primary vertices of proton-proton collisions at the LHC, a more promising inclusive search strategy is proposed.
The Heavy Flavor Averaging Group provides with this document input to the European Strategy for Particle Physics. Research in heavy-flavor physics is an essential component of the particle-physics program, both within and beyond the Standard Model. To fully realize the potential of the field, we believe the strategy should include strong support for the ongoing experimental and theoretical heavy-flavor research, future upgrades of existing facilities, and significant heavy-flavor capabilities at future colliders, including dedicated experiments.
Precise knowledge of the location of the material in the LHCb vertex locator (VELO) is essential to reducing background in searches for long-lived exotic particles, and in identifying jets that originate from beauty and charm quarks. Secondary interactions of hadrons produced in beam-gas collisions are used to map the location of material in the VELO. Using this material map, along with properties of a reconstructed secondary vertex and its constituent tracks, a $p$-value can be assigned to the hypothesis that the secondary vertex originates from a material interaction. A validation of this procedure is presented using photon conversions to dimuons.
This article reports world averages of measurements of $b$-hadron, $c$-hadron, and $τ$-lepton properties obtained by the Heavy Flavor Averaging Group using results available through summer 2016. For the averaging, common input parameters used in the various analyses are adjusted (rescaled) to common values, and known correlations are taken into account. The averages include branching fractions, lifetimes, neutral meson mixing parameters, \CP~violation parameters, parameters of semileptonic decays and CKM matrix elements.
The phenomenon of CP violation is crucial to understand the asymmetry between matter and antimatter that exists in the Universe. Dramatic experimental progress has been made, in particular in measurements of the behaviour of particles containing the b quark, where CP violation effects are predicted by the Kobayashi-Maskawa mechanism that is embedded in the Standard Model. The status of these measurements and future prospects for an understanding of CP violation beyond the Standard Model are reviewed.
The first measurements of the coherence factor R_{K_S^0Kπ} and the average strong--phase difference δ^{K_S^0Kπ} in D^0 \to K_S^0 K^\mpπ^\pm decays are reported. These parameters can be used to improve the determination of the unitary triangle angle γ in B^- \rightarrow $\widetilde{D}K^-$ decays, where $\widetilde{D}$ is either a D^0 or a D^0-bar meson decaying to the same final state, and also in studies of charm mixing. The measurements of the coherence factor and strong-phase difference are made using quantum-correlated, fully-reconstructed D^0D^0-bar pairs produced in e^+e^- collisions at the ψ(3770) resonance. The measured values are R_{K_S^0Kπ} = 0.70 \pm 0.08 and δ^{K_S^0Kπ} = (0.1 \pm 15.7)$^\circ$ for an unrestricted kinematic region and R_{K*K} = 0.94 \pm 0.12 and δ^{K*K} = (-16.6 \pm 18.4)$^\circ$ for a region where the combined K_S^0 π^\pm invariant mass is within 100 MeV/c^2 of the K^{*}(892)^\pm mass. These results indicate a significant level of coherence in the decay. In addition, isobar models are presented for the two decays, which show the dominance of the K^*(892)^\pm resonance. The branching ratio {B}(D^0 \rightarrow K_S^0K^+π^-)/{B}(D^0 \rightarrow K_S^0K^-π^+) is determined to be 0.592 \pm 0.044 (stat.) \pm 0.018 (syst.), which is more precise than previous measurements.