arXiv subjects

T. Hillberg

Publications and source records attributed to T. Hillberg.

6 recordsLinked to original sources

arXiv2026

Characterization of telecentric dual-etalon Fabry-Pérot systems from observational data. Properties of the CRISP2 instrument at the Swedish 1-m Solar Telescope

Imaging Fabry-Pérot Interferometer (FPI) observations are commonly used in solar physics to infer physical parameters in the photosphere and chromosphere through modeling of the observations. Such techniques require detailed knowledge of the spectral instrumental profile in order to produce accurate results. In this study we present a method to characterize the spatial variation of parameters of dual-etalon FPI instruments mounted in telecentric configuration: spatially-resolved cavity separation and reflectivities of both etalons, as well as the prefilter variation across the field-of-view. Here, we aim at characterizing the field-of-view dependence of the parameters of the new CRISP2 FPI. We have implemented a forward model of the FPI instrumental degradation combined with a template average quiet-Sun spectrum at disk center in order to model two sets of observational data. Our method does not require any change in the optical setup or the utilization of external sources of illumination. We assess the validity of several functional forms in the calculation of the FPI transmission profiles. Our results show that (generally) the inclusion of the secondary transmission peaks at 1 FSR and a detailed estimate of the prefilter curve is necessary to obtain accurate values of both etalon reflectivities. Our results show that the cavity separation of CRISP2 is very flat, with an RMS variation below 2 nm over the entire field-of-view for both etalons. Reflectivity RMS variations are 0.4% and 0.3% for the primary and secondary etalons at 617.3 nm. The methods described in this paper are relevant for the characterization of present and future FPI instruments and we have made them publicly available to the solar community.

astro-ph.IM↗

arXiv2025

The making of robust and highly performing imaging spectropolarimeters for large solar telescopes

We discuss the requirements, concepts, simulations, implementation, and calibration of two dual Fabry-Perot based imaging spectropolarimeters, CRISP and CHROMIS, at the Swedish 1-meter Solar Telescope, and CRISP2 that is under construction. These instruments use a combination of a high-resolution and a low-resolution etalon together with an order-sorting prefilter to define the bandpass. The overall design is made robust and stable by tailoring the low-resolution etalon reflectivity to accommodate expected cavity errors from both etalons, and by using a compact optical design that eliminates the need for folding mirrors. By using a telecentric design based on lenses rather than mirrors, image degradation by the FPI system is negligible, as shown in a previous publication, and the throughput of the system is maximised. Initial alignment, and maintaining that alignment over time, is greatly simplified. The telecentric design allows full calibration and/or modelling of essential system parameters to be carried out without interfering with the optical setup. We also discuss briefly the polarimeters developed for CRISP and CHROMIS. The high performance of CRISP and CHROMIS has been demonstrated in an earlier publication through measurements of the granulation contrast and comparisons with similar measurements simultaneously made through broadband continuum filters. Here, we focus on the aspects of the design that are central to enabling high performance and robustness, but also discuss the calibration and processing of the data, and use a few examples of processed data to demonstrate the achievable image and data quality. We put forward a proposal for a similar conceptual design for the European Solar Telescope and conclude by discussing potential problems of the proposed approach to designs of this type. Some aspects of these FPI systems may be of interest also outside the solar community.

astro-ph.IM↗

arXiv2021

SSTRED: Data- and metadata-processing pipeline for CHROMIS and CRISP

Context: Data from ground-based, high-resolution solar telescopes can only be used for science with calibrations and processing, which requires detailed knowledge about the instrumentation. [...] Aims: We aim to provide observers with a user-friendly data pipeline for data from the Swedish 1-meter Solar Telescope (SST) that delivers science-ready data together with the metadata needed for proper interpretation and archiving. Methods: We briefly describe the [instrumentation]. We summarize the processing steps from raw data to science-ready data cubes in FITS files. We report calibrations and compensations for data imperfections in detail. Misalignment of \ion{Ca}{ii} data due to wavelength-dependent dispersion is identified, characterized, and compensated for. We describe intensity calibrations that remove or reduce the effects of filter transmission profiles as well as solar elevation changes. We present REDUX, a new version of the MOMFBD image restoration code, with multiple enhancements and new features. [...] We describe how image restoration is used [...]. The science-ready output is delivered in FITS files, with metadata compliant with the SOLARNET recommendations. Data cube coordinates are specified within the World Coordinate System (WCS). Cavity errors are specified as distortions of the WCS wavelength coordinate with an extension of existing WCS notation. We establish notation for specifying the reference system for Stokes vectors [...]. [CRISPEX] has been extended to accept SSTRED output [...]. Results: SSTRED is a mature data-processing pipeline for imaging instruments, developed and used for the SST/CHROMIS imaging spectrometer and the SST/CRISP spectropolarimeter. SSTRED delivers well-characterized, science-ready, archival-quality FITS files with well-defined metadata. The SSTRED code, as well as REDUX and CRISPEX, is freely available through git repositories.

astro-ph.IM↗

arXiv2019

Mapping the magnetic field of flare coronal loops

Here we report on the unique observation of flaring coronal loops at the solar limb using high resolution imaging spectropolarimetry from the Swedish 1-meter Solar Telescope. The vantage position, orientation and nature of the chromospheric material that filled the flare loops allowed us to determine their magnetic field with unprecedented accuracy using the weak-field approximation method. Our analysis reveals coronal magnetic field strengths as high as 350 Gauss at heights up to 25 Mm above the solar limb. These measurements are substantially higher than a number of previous estimates and may have considerable implications for our current understanding of the extended solar atmosphere.

astro-ph.SR↗

arXiv2014

CRISPRED: A data pipeline for the CRISP imaging spectropolarimeter

The production of science-ready data from major solar telescopes requires expertise beyond that of the typical observer. This is a consequence of the increasing complexity of instruments and observing sequences, which require calibrations and corrections for instrumental and seeing effects that are not only difficult to measure, but are also coupled in ways that require careful analysis in the design of the correction procedures. Modern space-based telescopes have data-processing pipelines capable of routinely producing well-characterized data products. High-resolution imaging spectropolarimeters at ground-based telescopes need similar data pipelines. We present new methods for flat-fielding spectropolarimetric data acquired with telecentric Fabry-Perot instruments and a new approach for accurate camera co-alignment for image restoration. We document a procedure that forms the basis of current state of the art processing of data from the CRISP imaging spectropolarimeter at the Swedish 1-m Solar Telescope (SST). By collecting, implementing, and testing a suite of computer programs, we have defined a data reduction pipeline for this instrument. This pipeline, CRISPRED, streamlines the process of making science-ready data. It is implemented and operated in IDL, with time-consuming steps delegated to C. CRISPRED will be the basis also for the data pipeline of the forthcoming CHROMIS instrument.

astro-ph.SR↗

arXiv2008

CRISP Spectropolarimetric Imaging of Penumbral Fine Structure

We discuss penumbral fine structure in a small part of a pore, observed with the CRISP imaging spectropolarimeter at the Swedish 1-m Solar Telescope (SST), close to its diffraction limit of 0.16 arcsec. Milne-Eddington inversions applied to these Stokes data reveal large variations of field strength and inclination angle over dark-cored penumbral intrusions and a dark-cored light bridge. The mid-outer part of this penumbra structure shows 0.3 arcsec wide spines, separated by 1.6 arcsec (1200 km) and associated with 30 deg inclination variations. Between these spines, there are no small-scale magnetic structures that easily can be be identified with individual flux tubes. A structure with nearly 10 deg more vertical and weaker magnetic field is seen midways between two spines. This structure is co-spatial with the brightest penumbral filament, possibly indicating the location of a convective upflow from below.

astro-ph↗