arXiv subjects

T. J. Kippenberg

Publications and source records attributed to T. J. Kippenberg.

At least 37 records · Page 2Linked to original sources

arXiv2014

Measurement and control of a mechanical oscillator at its thermal decoherence rate

In real-time quantum feedback protocols, the record of a continuous measurement is used to stabilize a desired quantum state. Recent years have seen highly successful applications in a variety of well-isolated micro-systems, including microwave photons and superconducting qubits. By contrast, the ability to stabilize the quantum state of a tangibly massive object, such as a nanomechanical oscillator, remains a difficult challenge: The main obstacle is environmental decoherence, which places stringent requirements on the timescale in which the state must be measured. Here we describe a position sensor that is capable of resolving the zero-point motion of a solid-state, nanomechanical oscillator in the timescale of its thermal decoherence, a critical requirement for preparing its ground state using feedback. The sensor is based on cavity optomechanical coupling, and realizes a measurement of the oscillator's displacement with an imprecision 40 dB below that at the standard quantum limit, while maintaining an imprecision-back-action product within a factor of 5 of the Heisenberg uncertainty limit. Using the measurement as an error signal and radiation pressure as an actuator, we demonstrate active feedback cooling (cold-damping) of the 4.3 MHz oscillator from a cryogenic bath temperature of 4.4 K to an effective value of 1.1$\pm$0.1 mK, corresponding to a mean phonon number of 5.3$\pm$0.6 (i.e., a ground state probability of 16%). Our results set a new benchmark for the performance of a linear position sensor, and signal the emergence of engineered mechanical oscillators as practical subjects for measurement-based quantum control.

quant-ph↗

arXiv2014

Quantum-limited amplification and parametric instability in the reversed dissipation regime of cavity optomechanics

Cavity optomechanical phenomena, such as cooling, amplification or optomechanically induced transparency, emerge due to a strong imbalance in the dissipation rates of the parametrically coupled electromagnetic and mechanical resonators. Here we analyze the reversed dissipation regime where the mechanical energy relaxation rate exceeds the energy decay rate of the electromagnetic cavity. We demonstrate that this regime allows for mechanically-induced amplification (or cooling) of the electromagnetic mode. Gain, bandwidth, and added noise of this electromagnetic amplifier are derived and compared to amplification in the normal dissipation regime. In addition, we analyze the parametric instability, i.e. optomechanical Brillouin lasing, and contrast it to conventional optomechanical phonon lasing. Finally, we propose an experimental scheme that realizes the reversed dissipation regime using parametric coupling and optomechanical cooling with a second electromagnetic mode enabling quantum-limited amplification. Recent advances in high-Q superconducting microwave resonators make the reversed dissipation regime experimentally realizable.

quant-ph↗

arXiv2013

Mode spectrum and temporal soliton formation in optical microresonators

The formation of temporal dissipative solitons in optical microresonators enables compact, high repetition rate sources of ultra-short pulses as well as low noise, broadband optical frequency combs with smooth spectral envelopes. Here we study the influence of the resonator mode spectrum on temporal soliton formation. Using frequency comb assisted diode laser spectroscopy, the measured mode structure of crystalline MgF2 resonators are correlated with temporal soliton formation. While an overal general anomalous dispersion is required, it is found that higher order dispersion can be tolerated as long as it does not dominate the resonator's mode structure. Mode coupling induced avoided crossings in the resonator mode spectrum are found to prevent soliton formation, when affecting resonator modes close to the pump laser. The experimental observations are in excellent agreement with numerical simulations based on the nonlinear coupled mode equations, which reveal the rich interplay of mode crossings and soliton formation.

physics.optics↗

arXiv2013

Temporal solitons in optical microresonators

Dissipative solitons can emerge in a wide variety of dissipative nonlinear systems throughout the fields of optics, medicine or biology. Dissipative solitons can also exist in Kerr-nonlinear optical resonators and rely on the double balance between parametric gain and resonator loss on the one hand and nonlinearity and diffraction or dispersion on the other hand. Mathematically these solitons are solution to the Lugiato-Lefever equation and exist on top of a continuous wave (cw) background. Here we report the observation of temporal dissipative solitons in a high-Q optical microresonator. The solitons are spontaneously generated when the pump laser is tuned through the effective zero detuning point of a high-Q resonance, leading to an effective red-detuned pumping. Red-detuned pumping marks a fundamentally new operating regime in nonlinear microresonators. While usually unstablethis regime acquires unique stability in the presence of solitons without any active feedback on the system. The number of solitons in the resonator can be controlled via the pump laser detuning and transitions to and between soliton states are associated with discontinuous steps in the resonator transmission. Beyond enabling to study soliton physics such as soliton crystals our observations open the route towards compact, high repetition-rate femto-second sources, where the operating wavelength is not bound to the availability of broadband laser gain media. The single soliton states correspond in the frequency domain to low-noise optical frequency combs with smooth spectral envelopes, critical to applications in broadband spectroscopy, telecommunications, astronomy and low phase-noise microwave generation.

physics.optics↗

arXiv2013

Evanescent straight tapered-fiber coupling of ultra-high Q optomechanical micro-resonators in a low-vibration helium-4 exchange-gas cryostat

We developed an apparatus to couple a 50-micrometer diameter whispering-gallery silica microtoroidal resonator in a helium-4 cryostat using a straight optical tapered-fiber at 1550nm wavelength. On a top-loading probe specifically adapted for increased mechanical stability, we use a specifically-developed "cryotaper" to optically probe the cavity, allowing thus to record the calibrated mechanical spectrum of the optomechanical system at low temperatures. We then demonstrate excellent thermalization of a 63-MHz mechanical mode of a toroidal resonator down to the cryostat's base temperature of 1.65K, thereby proving the viability of the cryogenic refrigeration via heat conduction through static low-pressure exchange gas. In the context of optomechanics, we therefore provide a versatile and powerful tool with state-of-the-art performances in optical coupling efficiency, mechanical stability and cryogenic cooling.

physics.ins-det↗

arXiv2012

Mid-Infrared Optical Frequency Combs based on Crystalline Microresonators

The mid-infrared spectral range (2 to 20 μm) is of particular importance for chemistry, biology and physics as many molecules exhibit strong ro-vibrational fingerprints. Frequency combs - broad spectral bandwidth coherent light sources consisting of equally spaced sharp lines - are creating new opportunities for advanced spectroscopy. Mid-infrared frequency comb sources have recently emerged but are still facing technological challenges, like achieving high power per comb line and tens of GHz line spacing as required for e.g. direct comb spectroscopy. Here we demonstrate a novel approach to create such a frequency comb via four-wave mixing in a continuous-wave pumped ultra-high Q crystalline microresonator made of magnesium fluoride. Careful choice of the resonator material and design made it possible to generate a broad comb of narrow lines in the mid-infrared: a vast cascade of about 100 lines spaced by 100 GHz spanning 200 nm (~10 THz) at λ=2.5 μm. With its distinguishing features of compactness, efficient conversion, large mode spacing and high power per comb line, this novel frequency comb source holds promise for new approaches to molecular spectroscopy even deeper in the mid-infrared.

physics.optics↗

arXiv2011

Universal Dynamics of Kerr Frequency Comb Formation in Microresonators

Optical frequency combs allow for precise measurement of optical frequencies and are used in a growing number of applications beyond spectroscopy and optical frequency metrology. A class of compact microresonator based frequency comb generators has emerged recently based on (hyper)-parametric frequency conversion, mediated by the Kerr-non-linearity, of a continuous wave laser beam. Despite the rapid progress and the emergence of a wide variety of micro-resonator Kerr-comb platforms, an understanding of the dynamics of the Kerr comb formation is still lacking. In particular the question in which regime low phase noise performance can be achieved has so far not been answered but is of critical importance for future application of this technology. Here an universal, platform independent understanding of the Kerr-comb formation dynamics based on experimental observations in crystalline MgF2 and planar Si3N4 comb generators is given. This explains a wide range of hereto not understood phenomena and reveals for the first time the underlying condition for low phase noise performance.

physics.optics↗

arXiv2011

Quantum-coherent coupling of a mechanical oscillator to an optical cavity mode

Quantum control of engineered mechanical oscillators can be achieved by coupling the oscillator to an auxiliary degree of freedom, provided that the coherent rate of energy exchange exceeds the decoherence rate of each of the two sub-systems. We achieve such quantum-coherent coupling between the mechanical and optical modes of a micro-optomechanical system. Simultaneously, the mechanical oscillator is cooled to an average occupancy of n = 1.7 \pm 0.1 motional quanta. Pulsed optical excitation reveals the exchange of energy between the optical light field and the micromechanical oscillator in the time domain at the level of less than one quantum on average. These results provide a route towards the realization of efficient quantum interfaces between mechanical oscillators and optical fields.

quant-ph↗

arXiv2011

Thermal-noise limited laser stabilization to a crystalline whispering-gallery-mode resonator

We have stabilized an external cavity diode laser to a whispering gallery mode resonator formed by a protrusion of a single-crystal magnesiumdifluoride cylinder. The cylinder's compact dimensions (<1 cm^3) reduce the sensitivity to vibrations and simplify the stabilization of its temperature in a compact setup. In a comparison to an ultrastable laser used for precision metrology we determine a minimum Allan deviation of 20 Hz, corresponding to a relative Allan deviation of 6*10^-14, at an integration time of 100 ms. This level of instability is compatible with the limits imposed by fundamental fluctuations of the material's refractive index at room temperature.

physics.optics↗

arXiv2010

Optomechanically induced transparency

Coherent interaction of laser radiation with multilevel atoms and molecules can lead to quantum interference in the electronic excitation pathways. A prominent example observed in atomic three-level-systems is the phenomenon of electromagnetically induced transparency (EIT), in which a control laser induces a narrow spectral transparency window for a weak probe laser beam. The concomitant rapid variation of the refractive index in this spectral window can give rise to dramatic reduction of the group velocity of a propagating pulse of probe light. Dynamic control of EIT via the control laser enables even a complete stop, that is, storage, of probe light pulses in the atomic medium. Here, we demonstrate optomechanically induced transparency (OMIT)--formally equivalent to EIT--in a cavity optomechanical system operating in the resolved sideband regime. A control laser tuned to the lower motional sideband of the cavity resonance induces a dipole-like interaction of optical and mechanical degrees of freedom. Under these conditions, the destructive interference of excitation pathways for an intracavity probe field gives rise to a window of transparency when a two-photon resonance condition is met. As a salient feature of EIT, the power of the control laser determines the width and depth of the probe transparency window. OMIT could therefore provide a new approach for delaying, slowing and storing light pulses in long-lived mechanical excitations of optomechanical systems, whose optical and mechanical properties can be tailored in almost arbitrary ways in the micro- and nano-optomechanical platforms developed to date.

quant-ph↗

arXiv2010

Cavity optomechanics with ultra-high Q crystalline micro-resonators

We present the first observation of optomechanical coupling in ultra-high Q crystalline whispering-gallery-mode (WGM) resonators. The high purity of the crystalline material enables optical quality factors in excess of 10^{10} and finesse exceeding 10^{6}. Simultaneously, mechanical quality factors greater than 10^{5} are obtained, still limited by clamping losses. Compared to previously demonstrated cylindrical resonators, the effective mass of the mechanical modes can be dramatically reduced by the fabrication of CaF2 microdisc resonators. Optical displacement monitoring at the 10^{-18} m/sqrt{Hz}-level reveals mechanical radial modes at frequencies up to 20 MHz, corresponding to unprecedented sideband factors (>100). Together with the weak intrinsic mechanical damping in crystalline materials, such high sindeband factors render crystalline WGM micro-resonators promising for backaction evading measurements, resolved sideband cooling or optomechanical normal mode splitting. Moreover, these resonators can operate in a regime where optomechanical Brillouin lasing can become accessible.

physics.optics↗

arXiv2010

Measuring nanomechanical motion with an imprecision far below the standard quantum limit

We demonstrate a transducer of nanomechanical motion based on cavity enhanced optical near-fields capable of achieving a shot-noise limited imprecision more than 10 dB below the standard quantum limit (SQL). Residual background due to fundamental thermodynamical frequency fluctuations allows a total imprecision 3 dB below the SQL at room temperature (corresponding to 600 am/Hz^(1/2) in absolute units) and is known to reduce to negligible values for moderate cryogenic temperatures. The transducer operates deeply in the quantum backaction dominated regime, prerequisite for exploring quantum backaction, measurement-induced squeezing and accessing sub-SQL sensitivity using backaction evading techniques.

quant-ph↗

arXiv2009

Octave Spanning Frequency Comb on a Chip

Optical frequency combs have revolutionized the field of frequency metrology within the last decade and have become enabling tools for atomic clocks, gas sensing and astrophysical spectrometer calibration. The rapidly increasing number of applications has heightened interest in more compact comb generators. Optical microresonator based comb generators bear promise in this regard. Critical to their future use as 'frequency markers', is however the absolute frequency stabilization of the optical comb spectrum. A powerful technique for this stabilization is self-referencing, which requires a spectrum that spans a full octave, i.e. a factor of two in frequency. In the case of mode locked lasers, overcoming the limited bandwidth has become possible only with the advent of photonic crystal fibres for supercontinuum generation. Here, we report for the first time the generation of an octave-spanning frequency comb directly from a toroidal microresonator on a silicon chip. The comb spectrum covers the wavelength range from 990 nm to 2170 nm and is retrieved from a continuous wave laser interacting with the modes of an ultra high Q microresonator, without relying on external broadening. Full tunability of the generated frequency comb over a bandwidth exceeding an entire free spectral range is demonstrated. This allows positioning of a frequency comb mode to any desired frequency within the comb bandwidth. The ability to derive octave spanning spectra from microresonator comb generators represents a key step towards achieving a radio-frequency to optical link on a chip, which could unify the fields of metrology with micro- and nano-photonics and enable entirely new devices that bring frequency metrology into a chip scale setting for compact applications such as space based optical clocks.

physics.optics↗

arXiv2009

Theoretical analysis of mechanical displacement measurement using a multiple cavity mode transducer

We present an optomechanical displacement transducer, that relies on three cavity modes parametrically coupled to a mechanical oscillator and whose frequency spacing matches the mechanical resonance frequency. The additional resonances allow to reach the standard quantum limit at substantially lower input power (compared to the case of only one resonance), as both, sensitivity and quantum backaction are enhanced. Furthermore, it is shown that in the case of multiple cavity modes, coupling between the modes is induced via reservoir interaction, e.g., enabling quantum backaction noise cancellation. Experimental implementation of the schemes is discussed in both the optical and microwave domain.

quant-ph↗

arXiv2009

Near-field cavity optomechanics with nanomechanical oscillators

Cavity-enhanced radiation pressure coupling between optical and mechanical degrees of freedom allows quantum-limited position measurements and gives rise to dynamical backaction enabling amplification and cooling of mechanical motion. Here we demonstrate purely dispersive coupling of high Q nanomechanical oscillators to an ultra-high finesse optical microresonator via its evanescent field, extending cavity optomechanics to nanomechanical oscillators. Dynamical backaction mediated by the optical dipole force is observed, leading to laser-like coherent nanomechanical oscillations solely due to radiation pressure. Moreover, sub-fm/Hz^(1/2) displacement sensitivity is achieved, with a measurement imprecision equal to the standard quantum limit (SQL), which coincides with the nanomechanical oscillator's zero-point fluctuations. The achievement of an imprecision at the SQL and radiation-pressure dynamical backaction for nanomechanical oscillators may have implications not only for detecting quantum phenomena in mechanical systems, but also for a variety of other precision experiments. Owing to the flexibility of the near-field coupling approach, it can be readily extended to a diverse set of nanomechanical oscillators and particularly provides a route to experiments where radiation pressure quantum backaction dominates at room temperature, enabling ponderomotive squeezing or QND measurements.

quant-ph↗

arXiv2009

Frequency Comb Assisted Diode Laser Spectroscopy for Measurement of Microcavity Dispersion

While being invented for precision measurement of single atomic transitions, frequency combs have also become a versatile tool for broadband spectroscopy in the last years. In this paper we present a novel and simple approach for broadband spectroscopy, combining the accuracy of an optical fiber-laser-based frequency comb with the ease-of-use of a tunable external cavity diode laser. This scheme enables broadband and fast spectroscopy of microresonator modes and allows for precise measurements of their dispersion, which is an important precondition for broadband optical frequency comb generation that has recently been demonstrated in these devices. Moreover, we find excellent agreement of measured microresonator dispersion with predicted values from finite element simulations and we show that tailoring microresonator dispersion can be achieved by adjusting their geometrical properties.

physics.optics↗

arXiv2009

Resolved-sideband cooling and measurement of a micromechanical oscillator close to the quantum limit

The observation of quantum phenomena in macroscopic mechanical oscillators has been a subject of interest since the inception of quantum mechanics. Prerequisite to this regime are both preparation of the mechanical oscillator at low phonon occupancy and a measurement sensitivity at the scale of the spread of the oscillator's ground state wavefunction. It has been widely perceived that the most promising approach to address these two challenges are electro nanomechanical systems. Here we approach for the first time the quantum regime with a mechanical oscillator of mesoscopic dimensions--discernible to the bare eye--and 1000-times more massive than the heaviest nano-mechanical oscillators used to date. Imperative to these advances are two key principles of cavity optomechanics: Optical interferometric measurement of mechanical displacement at the attometer level, and the ability to use measurement induced dynamic back-action to achieve resolved sideband laser cooling of the mechanical degree of freedom. Using only modest cryogenic pre-cooling to 1.65 K, preparation of a mechanical oscillator close to its quantum ground state (63+-20 phonons) is demonstrated. Simultaneously, a readout sensitivity that is within a factor of 5.5+-1.5 of the standard quantum limit is achieved. The reported experiments mark a paradigm shift in the approach to the quantum limit of mechanical oscillators using optical techniques and represent a first step into a new era of experimental investigation which probes the quantum nature of the most tangible harmonic oscillator: a mechanical vibration.

quant-ph↗

arXiv2009

Parametric Normal-Mode Splitting in Cavity Optomechanics

Recent experimental progress in cavity optomechanics has allowed cooling of mesoscopic mechanical oscillators via dynamic backaction provided by the parametric coupling to either an optical or an electrical resonator. Here we analyze the occurrence of normal-mode splitting in backaction cooling at high input power. We find that a hybridization of the oscillator's motion with the fluctuations of the driving field occurs and leads to a splitting of the mechanical and optical fluctuation spectra. Moreover, we find that cooling experiences a classical limitation through the cavity lifetime.

cond-mat.mes-hall↗