arXiv subjects

T. Li

Publications and source records attributed to T. Li.

At least 37 records · Page 2Linked to original sources

arXiv2024

High Performance Operation of a Direct-Current and Superconducting Radio-Frequency Combined Photocathode Gun

Superconducting radio-frequency (SRF) guns are promising candidates to deliver high brightness continuous-wave (CW) electron beams for new generations of coherent linac light sources, ultrafast electron diffractions, MeV pulsed beam applications, etc. To solve the compatibility problem of semiconductor photocathodes, a hybrid gun combining a direct-current gap and an SRF cavity has been developed. The gun, employing K2CsSb photocathodes driven by a green laser, has been brought into stable CW operation with a dark current below 100 pA, delivering electron beams at an energy gain of 2.4 MeV, an electron bunch charge of 100 pC, and a repetition rate of 1 MHz. A normalized beam emittance of 0.54 mm-mrad has been achieved at the bunch charge of 100 pC and peak current of about 6 A. CW operation at 81.25 MHz repetition rate has also been tested with the maximum average beam current reaching 3 mA.

physics.acc-ph↗

arXiv2024

Lensed Type Ia Supernova "Encore" at z=2: The First Instance of Two Multiply-Imaged Supernovae in the Same Host Galaxy

A bright ($m_{\rm F150W,AB}$=24 mag), $z=1.95$ supernova (SN) candidate was discovered in JWST/NIRCam imaging acquired on 2023 November 17. The SN is quintuply-imaged as a result of strong gravitational lensing by a foreground galaxy cluster, detected in three locations, and remarkably is the second lensed SN found in the same host galaxy. The previous lensed SN was called "Requiem", and therefore the new SN is named "Encore". This makes the MACS J0138.0$-$2155 cluster the first known system to produce more than one multiply-imaged SN. Moreover, both SN Requiem and SN Encore are Type Ia SNe (SNe Ia), making this the most distant case of a galaxy hosting two SNe Ia. Using parametric host fitting, we determine the probability of detecting two SNe Ia in this host galaxy over a $\sim10$ year window to be $\approx3\%$. These observations have the potential to yield a Hubble Constant ($H_0$) measurement with $\sim10\%$ precision, only the third lensed SN capable of such a result, using the three visible images of the SN. Both SN Requiem and SN Encore have a fourth image that is expected to appear within a few years of $\sim2030$, providing an unprecedented baseline for time-delay cosmography.

astro-ph.CO↗

arXiv2024

Strategies for Machine Learning Applied to Noisy HEP Datasets: Modular Solid State Detectors from SuperCDMS

Background reduction in the SuperCDMS dark matter experiment depends on removing surface events within individual detectors by identifying the location of each incident particle interaction. Position reconstruction is achieved by combining pulse shape information over multiple phonon channels, a task well-suited to machine learning techniques. Data from an Am-241 scan of a SuperCDMS SNOLAB detector was used to study a selection of statistical approaches, including linear regression, artificial neural networks, and symbolic regression. Our results showed that simpler linear regression models were better able than artificial neural networks to generalize on such a noisy and minimal data set, but there are indications that certain architectures and training configurations can counter overfitting tendencies. This study will be repeated on a more complete SuperCDMS data set (in progress) to explore the interplay between data quality and the application of neural networks.

hep-ex↗

arXiv2023

Design and Development of the Core Software for STCF Offline Data Processing

The Super Tau Charm Facility (STCF) is a proposed electron-positron collider working at $\sqrt{s}=2\sim 7$ GeV, and the peak luminosity is designed to be above $0.5 \times 10^{35}cm^{-2}s^{-1}$. The huge amount of scientific data brings great challenges to the offline data processing software, including the Monte Carlo simulation, calibration, reconstruction as well as the data analysis. To facilitate efficient offline data processing, the offline software of Super Tau Charm Facility (OSCAR) is developed based on SNiPER, a lightweight framework designed for HEP experiments, as well as a few state-of-art software in the HEP community, such as podio and DD4hep. This paper describes the design and implementation of the core software of the OSCAR, which provides the foundation for the development of complex algorithms to be applied on the large data sets produced by STCF, particularly the way to integrate the common HEP software toolkits, such as Geant4, DD4hep and podio, into SNiPER. The software framework also provides a potential solution for other lightweight HEP experiments as well.

physics.ins-det↗

arXiv2022

Initial experimental results on a superconducting-qubit reset based on photon-assisted quasiparticle tunneling

We present here our recent results on qubit reset scheme based on a quantum-circuit refrigerator (QCR). In particular, we use the photon-assisted quasiparticle tunneling through a superconductor--insulator--normal-metal--insulator--superconductor junction to controllably decrease the energy relaxation time of the qubit during the QCR operation. In our experiment, we use a transmon qubit with dispersive readout. The QCR is capacitively coupled to the qubit through its normal-metal island. We employ rapid, square-shaped QCR control voltage pulses with durations in the range of 2--350 ns and a variety of amplitudes to optimize the reset time and fidelity. Consequently, we reach a qubit ground-state probability of roughly 97% with 80-ns pulses starting from the first excited state. The qubit state probability is extracted from averaged readout signal, where the calibration is based of the Rabi oscillations, thus not distinguishing the residual thermal population of the qubit.

quant-ph↗

arXiv2021

Uncovering the ultimate planet impostor. An eclipsing brown dwarf in a hierarchical triple with two evolved stars

Exoplanet searches through space-based photometric time series have shown to be very efficient in recent years. However, follow-up efforts on the detected planet candidates have been demonstrated to be critical to uncover the true nature of the transiting objects. In this paper we show a detailed analysis of one of those false positives hidden as planetary signals. In this case, the candidate KOI-3886.01 showed clear evidence of a planetary nature from various techniques. Indeed, the properties of the fake planet set it among the most interesting and promising for the study of planetary evolution as the star leaves the main sequence. To unveil the true nature of this system, we present a complete set of observational techniques including high-spatial resolution imaging, high-precision photometric time series (showing eclipses, phase curve variations and asteroseismology signals), high-resolution spectroscopy and derived radial velocities, to unveil the true nature of this planet candidate. We find that KOI-3886.01 is an interesting false positive case: a hierarchical triple system composed by a $\sim$K2III giant star (KOI-3886A) accompanied by a close-in eclipsing binary formed by a subgiant $\sim$G4IV star (KOI-3886B) and a brown dwarf (KOI-3886C). In particular, KOI-3886C is one of the most irradiated brown dwarfs known to date, showing the largest radius in this substellar regime. It is also the first eclipsing brown dwarf known around an evolved star. In this paper we highlight the relevance of complete sets of follow-up observations to extrasolar planets detected by the transit technique using large-pixel photometers such as Kepler and TESS, and in the future, PLATO. In particular, multi-color high-spatial resolution imaging was the first hint toward ruling out the planet scenario in this system.

astro-ph.EP↗

arXiv2021

Detecting the effects of quantum gravity with exceptional points in optomechanical sensors

In this manuscript, working with a binary mechanical system, we examine the effect of quantum gravity on the exceptional points of the system. On the one side, we find that the exceedingly weak effect of quantum gravity can be sensed via pushing the system towards a second-order exceptional point, where the spectra of the non-Hermitian system exhibits non-analytic and even discontinuous behavior. On the other side, the gravity perturbation will affect the sensitivity of the system to deposition mass. In order to further enhance the sensitivity of the system to quantum gravity, we extend the system to the other one which has a higher-order (third-order) exceptional point. Our work provides a feasible way to use exceptional points as a new tool to explore the effect of quantum gravity.

quant-ph↗

arXiv2021

Fast digital refocusing and depth of field extended Fourier ptychography microscopy

Fourier ptychography microscopy (FPM), sharing its roots with synthetic aperture technique and phase retrieval method, is a recently developed computational microscopic super-resolution technique. By turning on the light-emitting diode (LED) elements sequentially and acquiring the corresponding images that contain different spatial frequencies, FPM can achieve a wide field-of-view (FOV), high-spatial-resolution imaging, and phase recovery simultaneously. Conventional FPM assumes that the sample is sufficiently thin and strictly in focus. Nevertheless, even for a relatively thin sample, the non-planar distribution characteristics and the non-ideal position/posture of the sample will cause all or part of FOV to be defocused. In this paper, we proposed a fast digital refocusing and depth-of-field (DOF) extended FPM strategy by taking the advantages of image lateral shift caused by sample defocusing and varied-angle illuminations. The lateral shift amount is proportional to the defocus distance and the tangent of the illumination angle. Instead of searching the optimal defocus distance in optimization strategy, which is time-consuming, the defocus distance of each subregion of the sample can be precisely and quickly obtained by calculating the relative lateral shift amounts corresponding to different oblique illuminations. And then, the digital refocusing strategy rooting in the Fresnel propagator is integrated into the FPM framework to achieve the high-resolution and phase information reconstruction for each part of the sample, which means the DOF the FPM is effectively extended. The feasibility of the proposed method in fast digital refocusing and FOV extending is verified in the actual experiments with the USAF chart and biological samples.

physics.optics↗

arXiv2021

Analyses of Laser Propagation Noises for TianQin Gravitational Wave Observatory Based on the Global Magnetosphere MHD Simulations

TianQin is a proposed space-borne gravitational wave (GW) observatory composed of three identical satellites orbiting around the geocenter with a radius of $10^5$ km. It aims at detecting GWs in the frequency range of 0.1 mHz -- 1 Hz. The detection of GW relies on the high precision measurement of optical path length at $10^{-12}$~m level. The dispersion of space plasma can lead to the optical path difference (OPD, $Δl$) along the propagation of laser beams between any pair of satellites. Here, we study the OPD noises for TianQin. The Space Weather Modeling Framework is used to simulate the interaction between the Earth magnetosphere and solar wind. From the simulations, we extract the magnetic field and plasma parameters on the orbits of TianQin at four relative positions of the satellite constellation in the Earth magnetosphere. We calculate the OPD noise for single link, Michelson combination, and Time-Delay Interferometry (TDI) combinations ($α$ and $X$). For single link and Michelson interferometer, the maxima of $|Δl|$ are on the order of 1 pm. For the TDI combinations, these can be suppressed to about 0.004 and 0.008 pm for $α$ and $X$. The OPD noise of the Michelson combination is colored in the concerned frequency range; while the ones for the TDI combinations are approximately white. Furthermore, we calculate the ratio of the equivalent strain of the OPD noise to that of TQ, and find that the OPD noises for the TDI combinations can be neglected in the most sensitive frequency range of TQ.

astro-ph.SR↗

arXiv2020

PBjam: A Python package for automating asteroseismology of solar-like oscillators

Asteroseismology is an exceptional tool for studying stars by using the properties of observed modes of oscillation. So far the process of performing an asteroseismic analysis of a star has remained somewhat esoteric and inaccessible to non-experts. In this software paper we describe PBjam, an open-source Python package for analyzing the frequency spectra of solar-like oscillators in a simple but principled and automated way. The aim of PBjam is to provide a set of easy-to-use tools to extract information about the radial and quadrupole oscillations in stars that oscillate like the Sun, which may then be used to infer bulk properties such as stellar mass, radius and age or even structure. Asteroseismology and its data analysis methods are becoming increasingly important as space-based photometric observatories are producing a wealth of new data, allowing asteroseismology to be applied in a wide range of contexts such as exoplanet, stellar structure and evolution, and Galactic population studies.

astro-ph.SR↗

arXiv2020

Sunspot penumbral filaments intruding into a light bridge and the resultant reconnection jets

Penumbral filaments and light bridges are prominent structures inside sunspots and are important for understanding the nature of sunspot magnetic fields and magneto-convection underneath. We investigate an interesting event where several penumbral filaments intruded into a sunspot light bridge for more insights into magnetic fields of the sunspot penumbral filament and light bridge, as well as their interaction. The emission, kinematic, and magnetic topology characteristics of the penumbral filaments intruding into the light bridge and the resultant jets are studied. At the west part of the light bridge, the intruding penumbral filaments penetrated into the umbrae on both sides of the light bridge, and two groups of jets were also detected. The jets shared the same projected morphology with the intruding filaments and were accompanied by intermittent footpoint brightenings. Simultaneous spectral imaging observations provide convincing evidences for the presences of magnetic reconnection related heating and bidirectional flows near the jet bases and contribute to measuring vector velocities of the jets. Additionally, nonlinear force-free field extrapolation results reveal strong and highly inclined magnetic fields along the intruding penumbral filaments, consistent well with the results deduced from the vector velocities of the jets. Therefore, we propose that the jets could be caused by magnetic reconnections between emerging fields within the light bridge and the nearly horizontal fields of intruding filaments. They were then ejected outward along the stronger filaments fields. Our study indicates that magnetic reconnection could occur between the penumbral filament fields and emerging fields within light bridge and produce jets along the stronger filament fields. These results further complement the study of magnetic reconnection and dynamic activities within the sunspot.

astro-ph.SR↗

arXiv2020

External reconnection and resultant reconfiguration of overlying magnetic fields during sympathetic eruptions of two filaments

Sympathetic eruptions of two solar filaments have been studied for several decades, but the detailed physical process through which one erupting filament triggers another is still under debate. Here we investigate a sympathetic event involving successive eruptions of two filaments on 2015 November 15-16, which presented abundant sympathetic characteristics. The two filaments (F1 and F2) were separated by a narrow region of negative polarity, and F1 firstly erupted, producing a two-ribbon flare. When the outward-spreading ribbon produced by F1 approached stable F2, a weak brightening was observed to the south of F2 and then spread northward, inward approaching F2. Behind this inward-spreading brightening, a dimming region characterized by a plasma density reduction of 30% was extending. NLFFF extrapolations with a time sequence reveal that fields above pre-eruption F1 and F2 constituted a quadrupolar magnetic system with a possible null point. Moreover, the null point kept moving towards F2 and descending within the following hours.We infer that the rising F1 pushed its overlying fields towards the fields above stable F2 and caused successive external reconnection between the overlying fields. From outside to inside (lower and lower in height), the fields above pre-eruption F2 were gradually involved in the reconnection, manifesting as the inward-spreading brightening and extending dimming on the south side of F2. Furthermore, the external reconnection could reconfigure the overlying fields of F2 by transporting magnetic flux from its west part to the east part, which is further verified by the subsequent partial eruption of F2. We propose an integrated evidence chain to demonstrate the critical roles of external magnetic reconnection and the resultant reconfiguration of overlying fields on the sympathetic eruptions of two filaments.

astro-ph.SR↗

arXiv2020

Fast degradation of the circular flare ribbon on 2014 August 24

The separation and elongation motions of solar flare ribbons have extensively been investigated. The degradation and disappearance of ribbons have rarely been explored. In this paper, we report our multiwavelength observations of a C5.5 circular-ribbon flare associated with two jets (jet1 and jet2) on 2014 August 24, focusing on the fast degradation of the outer circular ribbon (CR). The flare, consisting of a short inner ribbon (IR) and outer CR, was triggered by the eruption of a minifilament. The brightness of IR and outer CR reached their maxima simultaneously at $\sim$04:58 UT in all AIA wavelengths. Subsequently, the short eastern part of CR faded out quickly in 1600 Å but gradually in EUV wavelengths. The long western part of CR degraded in the counterclockwise direction and experienced a deceleration. The degradation was distinctly divided into two phases: phase I with faster apparent speeds (58$-$69 km s$^{-1}$) and phase II with slower apparent speeds (29$-$35 km s$^{-1}$). The second phase stopped at $\sim$05:10 UT when the western CR totally disappeared. Besides the outward propagation of jet1, the jet spire experienced untwisting motion in the counterclockwise direction during 04:55$-$05:00 UT. We conclude that the event can be explained by the breakout jet model. The coherent brightenings of the IR and CR at $\sim$04:58 UT may result from the impulsive interchange reconnection near the null point, whereas sub-Alfvénic slipping motion of the western CR in the counterclockwise direction indicates the occurrence of slipping magnetic reconnection. Another possible explanation of the quick disappearance of the hot loops connecting to the western CR is that they are simply reconnected sequentially without the need for significant slippage after the null point reconnection.

astro-ph.SR↗

arXiv2020

An assessment of the J-integral test for a metallic foam

An assessment is made of the J-integral test procedure for initial crack growth in an open-cell aluminium alloy foam by combining finite element (FE) simulations with experiment. It is found experimentally that a zone of randomly failed struts develops ahead of the primary crack tip, and is comparable in size to that of the plastic zone. Hence, a crack tip J-field is absent at the initiation of crack growth from the primary crack tip. This implies that the measured J_IC value and the J versus crack extension Da curve cannot be treated as material properties despite the fact that the specimen size meets the usual criteria for J validity. The toughness tests were performed on a single-edge notched bend specimen, and crack extension was measured by the direct current potential drop method, by digital image correlation and by X-ray computed tomography. The crack growth resistance of the foam is associated with two distinct zones of plastic dissipation: (i) a bulk plastic zone emanating from the crack tip (containing a cluster of randomly failed struts), and (ii) a crack bridging zone behind the advancing crack tip. The applicability of a cohesive zone model to predict the fracture response is explored for the observed case of large scale bridging. To do so, FE simulations are performed by replacing the discrete lattice of the open-cell metallic foam by a compressible, elastic-plastic hardening solid while the fracture process zone in the foam is represented by a cohesive zone, as characterised by a tensile traction versus separation law. A detailed comparison of the cohesive zone model with experimental observations reveals that it is possible to capture the load versus displacement response but not the details of the fracture process zone using a single set of process zone parameters.

cond-mat.mtrl-sci↗

arXiv2020

Designation of a binocular structure for complex sources of x-rays and neutron source

A structure, used as a complex source of X-rays and neutron source, is designed with the assistance of CST module tool. Particles of -H and electron, attracted from a plasma source, are designed to be separated by an energy selector. Soon after the separation, the trajectory and beam quality of -H is controlled by a special designation of potential barrier and potential well. And the acceleration of both particles is realized by three pairs of pierce similar pole to an energy of 150keV to produce x-rays or neutron. With proper optimization of structure and potential combination, a binocular structure with beam center distance of 15mm, beam diameter smaller than 3.5mm has been devised, which giveps a feasible suggestion to produce two rays with one structure in the same time.

physics.acc-ph↗

arXiv2020

Measuring intensity interference in a low multiplicity system $ππx$ with a new observing method

Prior proposed observing approaches using event mixing technique for Bose-Einstein correlations (BEC) measurements in exclusive reactions with very low multiplicities are still unsatisfactory due to the problems of sample reduction and introducing extra and unnecessary fitting parameters. We here propose an event mixing method with a new mixing cut, named energy sum range (ESR) cut, to investigate two-pion Bose-Einstein correlations (BEC) in reactions with only two identical pions among three final state particles. This mixing method employs two-pion energy sum characteristic to control the mixing procedures, with no requirement on eliminating any original events. Numerical simulations are performed to show the viability of this new BEC observing method.

nucl-th↗

arXiv2019

A faint halo star cluster discovered in the Blanco Imaging of the Southern Sky Survey

We present the discovery of a faint, resolved stellar system, BLISS J0321+0438 (BLISS 1), found in Dark Energy Camera data from the first observing run of the Blanco Imaging of the Southern Sky (BLISS) Survey. BLISS J0321+0438 (BLISS 1) is located at (RA, Dec) = (177.511, -41.772) deg with a heliocentric distance of D = 23.7$^{+1.9}_{-1.0}$ kpc. It is a faint, Mv = 0.0$^{+1.7}_{-0.7}$ mag, and compact, rh = 4.1 +/- 1 pc, system consistent with previously discovered faint halo star clusters. Using data from the second data release of the Gaia satellite, we measure a proper motion of $(μ_α\cos δ, μ_δ)$ = (-2.37 +/- 0.06, 0.16 +/- 0.04) mas/yr. Combining the available positional and velocity information with simulations of the accreted satellite population of the Large Magellanic Cloud, we find that it is unlikely that BLISS J0321+0438 (BLISS 1) originated with the Large Magellanic Cloud.

astro-ph.GA↗

arXiv2019

Physics case for an LHCb Upgrade II - Opportunities in flavour physics, and beyond, in the HL-LHC era

The LHCb Upgrade II will fully exploit the flavour-physics opportunities of the HL-LHC, and study additional physics topics that take advantage of the forward acceptance of the LHCb spectrometer. The LHCb Upgrade I will begin operation in 2020. Consolidation will occur, and modest enhancements of the Upgrade I detector will be installed, in Long Shutdown 3 of the LHC (2025) and these are discussed here. The main Upgrade II detector will be installed in long shutdown 4 of the LHC (2030) and will build on the strengths of the current LHCb experiment and the Upgrade I. It will operate at a luminosity up to $ 2 \times 10^{34} \rm cm^{-2}s^{-1}$, ten times that of the Upgrade I detector. New detector components will improve the intrinsic performance of the experiment in certain key areas. An Expression Of Interest proposing Upgrade II was submitted in February 2017. The physics case for the Upgrade II is presented here in more depth. $CP$-violating phases will be measured with precisions unattainable at any other envisaged facility. The experiment will probe $b\to s \ell^+\ell^-$ and $b\to d \ell^+\ell^-$ transitions in both muon and electron decays in modes not accessible at Upgrade I. Minimal flavour violation will be tested with a precision measurement of the ratio of $B(B^0\toμ^+μ^-)/B(B_s^0\to μ^+μ^-)$. Probing charm $CP$ violation at the $10^{-5}$ level may result in its long sought discovery. Major advances in hadron spectroscopy will be possible, which will be powerful probes of low energy QCD. Upgrade II potentially will have the highest sensitivity of all the LHC experiments on the Higgs to charm-quark couplings. Generically, the new physics mass scale probed, for fixed couplings, will almost double compared with the pre-HL-LHC era; this extended reach for flavour physics is similar to that which would be achieved by the HE-LHC proposal for the energy frontier.

hep-ex↗