arXiv subjects

T. Mansuryan

Publications and source records attributed to T. Mansuryan.

4 recordsLinked to original sources

arXiv2023

Spatial Division Multiplexing for Multiplex Coherent Anti-Stokes Raman Scattering

We demonstrate how a narrowband pump and a broadband spectrum can be spatially multiplexed by selective coupling them in two distinct modes of a few-mode microstructure fiber. The first mode carries most of the input pump energy, and experiences spectral broadening. Whereas the second mode preserves the narrow bandwidth of the remaining part of the pump. Bimodal propagation, with a power unbalance strongly in favor of the fundamental mode, is naturally obtained by maximizing coupling into the fundamental mode of the fiber. At the fiber output, the nearly monochromatic beam and the supercontinuum carried by the two different modes are combined by a microscope objective, and used as a pump and a Stokes wave for self-referenced multiplex coherent anti-Stokes Raman scattering micro-spectroscopy. The spectral resolution, the signal-to-noise-ratio, and the possible amplification of the remaining pump beam are discussed.

physics.optics↗

arXiv2021

Frequency-Resolved Spatial Beam Mapping in Multimode Fibers: Application to Mid-Infrared Supercontinuum Generation

We present a new spatial-spectral mapping technique permitting to measure the beam intensity at the output of a graded-index (GRIN) multimode fiber with sub-nanometric spectral resolution. We apply this method to visualize the fine structure of the beam shape of a sideband generated at 1870 nm by geometric parametric instability (GPI) in a GRIN fiber. After spatial-spectral characterization, we amplify the GPI sideband with a Tm-doped fiber amplifier to obtain a microjoule-scale picosecond pump whose spectrum is finally broadened in a segment of InF3 optical fiber to achieve supercontinuum ranging from 1.7 μm up to 3.4 μm

physics.optics↗

arXiv2021

Giving light a new twist with standard optical fibres: rainbow Archimedean spiral emission

We demonstrate a new practical approach for generating multicolour spiral-shaped beams. It makes use of a standard silica optical fibre, combined with a titled input laser beam. The resulting breaking of the fibre axial symmetry leads to the propagation of a helical beam. The associated output far-field has spiral shape, independently of the input laser power value. Whereas, with a high-power near-infrared femtosecond laser, a visible supercontinuum spiral emission is generated. With appropriate control of the input laser coupling conditions, the colours of the spiral spatially self-organize in a rainbow distribution. Our method is independent of the laser source wavelength and polarization. Therefore, standard optical fibres may be used for generating spiral beams in many applications, ranging from communications to optical tweezers and quantum optics.

physics.optics↗

arXiv2019

Spatial Beam Self-Cleaning and Supercontinuum Generation with Yb-doped Multimode Graded-Index Fiber Taper Based on Accelerating Self-Imaging and Dissipative Landscape

We experimentally demonstrate spatial beam self-cleaning and supercontinuum generation in a tapered Ytterbium-doped multimode optical fiber with parabolic core refractive index and doping profile when 1064 nm pulsed beams propagate from wider (120 micrometers) into smaller (40 micrometers) diameter. In the passive mode, increasing the input beam peak power above 20 kW leads to a bell-shaped output beam profile. In the active configuration, gain from the pump laser diode permits to combine beam self-cleaning with supercontinuum generation between 520-2600 nm. By taper cut-back, we observed that the dissipative landscape i.e., a non-monotonic variation of the average beam power along the MMF leads to modal transitions of self-cleaned beams along the taper length.

physics.optics↗