arXiv subjects

T. Matsuzaki

Publications and source records attributed to T. Matsuzaki.

10 recordsLinked to original sources

arXiv2026

Absolute intensity measurement of pulsed muon beams using in-beam activation

The absolute number of negative muons contained in a beam is essential for many experiments at accelerator facilities, but determining it in pulsed beams has been difficult, particularly at high intensities. The method utilizing the yield of the $β$ delayed $γ$ rays from the residual nuclei after the muon nuclear capture reaction has recently been developed to determine the muon number in the pulsed muon beam. In particular, the in-beam activation method employs isotopes with short lifetimes, enabling the beam intensity to be measured over a short period with irradiating muon beams. However, only a limited number of isotopes have reliable measurements of production branching ratios (BRs), which are required to determine the absolute muon number in the pulsed beam. To search for new candidate isotopes that are suitable for in-beam activation method, the production branching ratio after the muon nuclear capture reaction was measured for natural abundance Cu, Zn, and Ag. Considering the strength of the BR, the muon capture probability, the practical detection efficiency of the detector, and rarity of the target material in the surrounding structures, the reaction $^\mathrm{nat}$Ag ($μ^-, ν_μx$) $^{107m}$Pd is found to be a useful reference for the muon number calibration.

physics.ins-det↗

arXiv2025

Lifetime measurement of the muonic atoms of enriched Si isotopes

Background: A muonic atom, composed of a negative muon and an atomic nucleus, undergoes two primary decay processes: muon-electron decay and muon nuclear capture. The branching ratio between these two processes can be determined from the measured lifetime of the muonic atom. While past researches have examined the general trend of muon capture rates across different nuclei, experimental and theoretical investigations into the isotope dependence of the lifetime remain limited. Purpose: The present study aims to measure the lifetimes of the muonic atom of isotopically enriched silicon isotopes. Methods: The experiment was conducted at the muon facility in the Material and Life Science Facility (MLF), J-PARC. A muon beam was stopped in various target materials, including isotopically enriched $^{28,29,30}$Si. The lifetimes of the muonic atoms were measured by detecting decay electrons using a $μ$SR spectrometer. The decay spectra were analyzed by fitting with multi-exponential functions to account for contributions from the target nucleus and surrounding materials. Results: For the first time, the lifetimes of the muonic atom of isotopically enriched $^{28,29,30}$Si were measured. Additionally, seven other targets were studied to validate the experimental method and analysis procedure. The results were compared with theoretical models such as Primakoff, Goulard-Primakoff, and the recently-developed microscopic and evaporation model (MEM). Conclusions: The Primakoff and Goulard-Primakoff formulas, while reproducing certain aspects of the isotope dependence, require further refinement. The comparison with MEM calculations constrains the axial vector ($g_A$) and induced pseudoscalar ($g_P$) coupling constants. The present experiment establishes a method for measuring the lifetimes of the muonic atom and will contribute to future systematic investigations.

nucl-ex↗

arXiv2025

Muonic X-Ray Measurement for the Nuclear Charge Distribution: the Case of Stable Palladium Isotopes

Background: The nuclear charge radius and distribution are the most fundamental quantities of the atomic nucleus. From the muonic transition energies, the absolute charge radius has been experimentally obtained, while there have been no established methods to discuss the distribution. Purpose: The muonic transition energies for five palladium isotopes with the mass number $A = 104$, $105$, $106$, $108$ and $110$ were measured. The procedure to deduce the charge radii and the method to discuss the charge distribution from the muonic transition energies are proposed. Method: The experiment was performed at the MuSIC-M1 beamline at Research Center for Nuclear Physics, Osaka University. A continuous muon beam impinged on the enriched palladium targets. Muonic X rays were measured by high-purity germanium detectors. Results: The muonic transition energies up to $4f$-$3d$ transitions were determined for five palladium isotopes. Discussion and conclusion: The root-mean-square charge radii are deduced assuming the two-parameter Fermi distribution. The charge distribution of the nucleus is discussed employing the Barrett model. The muonic transition energies of the $3d$-$2p$ transitions are crucial to discuss both the charge radius and the charge distribution.

nucl-ex↗

arXiv2025

Measurement of production branching ratio after muon nuclear capture reaction of Al and Si isotopes

Background: Muon nuclear capture is a reaction between a muon and a proton inside a nucleus through weak interactions. This reaction results in the formation of an excited nucleus, which subsequently de-excites by emitting several particles. Examination of the excited state allows for an investigation of the properties of nuclear excitation and particle emission in highly excited nuclei. Purpose: This study investigates muon nuclear capture of 27Al and 28,29,30Si, focusing on determining the absolute production branching ratio (BR) following muon nuclear capture and subsequent particle emissions. By measuring the absolute production BR, we can collect valuable information on the excitation energy distribution of muon nuclear capture. Methods: Measurements were conducted using the in-beam activation method at two pulsed muon facilities: RIKEN-RAL beamline and MLF at J-PARC. Absolute BRs were determined by measuring the number of muons irradiating the target using a plastic scintillator and the beta-delayed gamma-rays emitted from the produced nuclei using germanium detectors. Results: The absolute production branching ratios of muon nuclear capture on 27Al and 28,29,30Si were obtained with the highest accuracy to date. Predominant neutron emissions, even-odd atomic number dependence of particle emission probabilities, and influence of the neutron excess were observed. These results were compared with previous measurements and theoretical models and discussed regarding the excitation energy distribution, particle emission mechanism, and nuclear properties, such as resonance in the isovector transition. Conclusion: This study emphasizes the importance of considering nuclear structure effects, even-odd effects of proton and neutron numbers, neutron excess, nucleon pairing effect, and particle emission mechanisms, in the context of the muon nuclear capture reaction.

nucl-ex↗

arXiv2025

Neutron emission following nuclear muon capture on palladium isotopes

The energy spectra of the neutrons emitted following nuclear muon capture on palladium isotopes ($A=104$, 105, 106, 108, and 110) were measured using isotopically enriched target. \item[Method] The experiment was performed at the MuSIC-M1 beamline at the Research Center for Nuclear Physics (RCNP), Osaka University. The neutrons and $γ$ rays were detected with twenty-one liquid scintillators and BaF$_2$ detectors. The time-of-flight method was used to determine the neutron energy. \item[Results] Neutron energy spectra from 1\,MeV up to 20\,MeV were measured for five palladium isotopes, providing the first systematic data in the $A\sim100$ region. The spectral shapes were compared with the previous measurement for heavy nuclei and theoretical calculations. The neutron-neutron opening angle distribution was also measured and an indication of small angle correlation was found. \item[Conclusions] The spectral shape below 4\,MeV was well explained consistently with the previous measurement by the evaporation model introducing a mass number scaling. The neutron energy spectrum around 10\,MeV plays a key role in understanding the dynamics of the nuclear muon capture reaction because it is the result of the transition from the direct and pre-equilibrium neutron emission onto the evaporation process.

nucl-ex↗

arXiv2024

Measurement of the production branching ratios following nuclear muon capture for palladium isotopes using the in-beam activation method

Background: The energy distribution of excited states populated by the nuclear muon capture reaction can facilitate an understanding of the reaction mechanism; however, experimental data are fairly sparse. Purpose: We developed a new methodology, called the in-beam activation method, to measure the production probability of residual nuclei by muon capture. For the first application of the new method, we have measured muon-induced activation of five isotopically-enriched palladium targets. Methods: The experiment was conducted at the RIKEN-RAL muon facility of the Rutherford Appleton Facility in the UK. The pulsed muon beam impinged on the palladium targets and gamma rays from the beta and isomeric decays from the reaction residues were measured using high-purity germanium detectors in both the in-beam and offline setups. Results: The production branching ratios of the residual nuclei of muon capture for five palladium isotopes with mass numbers A = 104, 105, 106, 108, and 110 were obtained. The results were compared with a model calculation using the particle and heavy ion transport system (PHITS) code. The model calculation well reproduces the experimental data. Conclusion: For the first time, this study provides experimental data on the distribution of production branching ratios without any theoretical estimation or assumptions in the interpretation of the data analysis

nucl-ex↗

arXiv2023

Development of wide range photon detection system for muonic X-ray spectroscopy

We have developed a photon detection system for muonic X-ray spectroscopy. The detector system consists of high-purity germanium detectors with BGO Compton suppressors. The signals from the detectors are readout with a digital acquisition system. The absolute energy accuracy, energy and timing resolutions, photo-peak efficiency, the performance of the Compton suppressor, and high count rate durability are studied with standard $γ$-ray sources and in-beam experiment using $^{27}\mathrm{Al}(p, γ){}^{28}\mathrm{Si}$ resonance reaction. The detection system was demonstrated at Paul Scherrer Institute. A calibration method for a photon detector at a muon facility using muonic X-rays of $^{197}$Au and $^{209}$Bi is proposed.

physics.ins-det↗

arXiv2017

Excited configurations of hydrogen in the BaTiO$_{3-x}$H$_x$ perovskite lattice associated with hydrogen exchange and transport

Excited configurations of hydrogen in the oxyhydride BaTiO$_{3-x}$H$_x$ ($x=0.1-0.5$), which are considered to be involved in its hydrogen transport and exchange processes, were investigated by positive muon spin relaxation ($μ^+$SR) spectroscopy using muonium (Mu) as a pseudoisotope of hydrogen. Muons implanted into the BaTiO$_{3-x}$H$_x$ perovskite lattice were mainly found in two qualitatively different metastable states. One was assigned to a highly mobile interstitial protonic state, which is commonly observed in perovskite oxides. The other was found to form an entangled two spin-$\frac{1}{2}$ system with the nuclear spin of an H$^-$ ion at the anion site. The structure of the (H,Mu) complex agrees well with that of a neutralized center containing two H$^-$ ions at a doubly charged oxygen vacancy, which was predicted to form in the SrTiO$_{3-δ}$ perovskite lattice by a computational study [Y. Iwazaki $et$ $al$., APL Materials 2, 012103 (2014)]. Above 100 K, interstitial Mu$^+$ diffusion and retrapping to a deep defect were observed, which could be a rate-limiting step of macroscopic Mu/H transport in the BaTiO$_{3-x}$H$_x$ lattice.

cond-mat.mtrl-sci↗

arXiv2007

Modeling with structure of resins in electonic compornents

In recent years, interfacial fracture becomes one of the most important problems in the assessment of reliability of electronics packaging. Especially, underfill resin is used with solder joints in flip chip packaging for preventing the thermal fatigue fracture in solder joints. In general, the interfacial strength has been evaluated on the basis of interfacial fracture mechanics concept. However, as the size of devices decrease, it is difficult to evaluate the interfacial strength quantitatively. Most of researches in the interfacial fracture were conducted on the basis of the assumption of the perfectly bonding condition though the interface has the micro-scale structure and the bonding is often imperfect. In this study, the mechanical model of the interfacial structure of resin in electronic components was proposed. Bimaterial model with the imperfect bonding condition was examined by using a finite element analysis (FEA). Stress field in the vicinity of interface depends on the interfacial structure with the imperfect bonding. In the front of interfacial crack tip, the behavior of process zone is affected by interfacial structure. However, the instability of fracture for macroscopic crack which means the fracture toughness is governed by the stress intensity factor based on the fracture mechanics concept.

cond-mat.mtrl-sci↗

arXiv2004

Electronic Specific Heat of La_{2-x}Sr_{x}CuO_{4}: Pseudogap Formation and Reduction of the Superconducting Condensation Energy

To examine the so-called small pseudogap and the superconducting (SC) condensation energy U(0), the electronic specific heat Cel was measured on La_{2-x}Sr_{x}CuO_{4} up to ~120K. In samples with doping level p (=x) less than ~0.2, small pseudogap behavior appears in the γ(=Cel/T) vs. T curve around the mean-field critical temperature for a d-wave superconductor Tco (=2*Δ_{0}/(4~5)k_B), where Δ_{0} is the maximum gap at T<<Tc. The condensation energy U(0) is largely reduced in the pseudogap regime (p< ~0.2). The reduction of U(0) can be well reproduced by introducing an effective SC energy scale Δ_{eff}=β*p*Δ_{0} (β=4.5) instead of Δ_{0}. The effective SC energy scale is discussed in relation to the coherent pairing gap formed over the nodal Fermi arc.

cond-mat.supr-con↗