Searcharxiv⌕ Search

arXiv subjects

T. Maurer

Publications and source records attributed to T. Maurer.

12 recordsLinked to original sources
arXiv2013

Enhancing LSPR sensitivity of Au gratings through graphene coupling to Au film

A particular interesting plasmonic system is that of metallic nanostructures interacting with metal films. As the LSPR behavior of gold nanostructures (Au NPs) on the top of a gold thin film is exquisitely sensitive to the spacer distance of the film-Au NPs, we investigate in the present work the influence of a few-layered graphene spacer on the LSPR behavior of the NPs. The idea is to evidence the role of few-layered graphene as one of the thinnest possible spacer. We first show that the coupling to the Au film induces a strong lowering at around 507nm and sharpening of the main LSPR of the Au NPs. Moreover, a blue shift in the main LSP resonance of about 13 nm is observed in the presence of a few-layered graphene spacer when compared to the case where gold nanostructures are directly linked to a gold thin film. Numerical simulations suggest that this LSP mode is dipolar and that the hot spots of the electric field are pushed to the top corners of the NPs, which makes it very sensitive to surrounding medium optical index changes and thus appealing for sensing applications. A figure of merit (FoM) of such a system (gold/graphene/ Au NPs) is 2.8, as compared to 2.1 for gold/Au NPs either a 33% sensitivity gain and opens up new sensing strategies.

cond-mat.mes-hall↗
arXiv2013

Copolymer template control of gold nanoparticle synthesis via thermal annealing

We present here an original process combining top-down and bottom-up approaches by annealing a thin gold film evaporated onto a hole template made by etching a PS-PMMA copolymer film. Such process allows a better control of the gold nanoparticle size distribution which provides a sharper localized surface plasmon resonance. This makes such route appealing for sensing applications since the figure of merit of the Au nanoparticles obtained after thermal evaporation is more than doubled. Such process could besides allow tuning the localized surface plasmon resonance by using copolymer with various molecular weights and thus be attractive for surface enhanced raman spectroscopy.

cond-mat.mes-hall↗
arXiv2013

Optical determination and identification of organic shells around nanoparticles: application to silver nanoparticles

We present a simple method to prove the presence of an organic shell around silver nanoparticles. This method is based on the comparison between optical extinction measurements of isolated nanoparticles and Mie calculations predicting the expected wavelength of the Localized Surface Plasmon Resonance of the nanoparticles with and without the presence of an organic layer. This method was applied to silver nanoparticles which seemed to be well protected from oxidation. Further experimental characterization via Surface Enhanced Raman Spectroscopy (SERS) measurements allowed to identify this protective shell as ethylene glycol. Combining LSPR and SERS measurements could thus give proof of both presence and identification for other plasmonic nanoparticles surrounded by organic shells.

cond-mat.mes-hall↗
arXiv2013

Optical properties of Au colloids self-organized into rings via copolymer templates

The investigation of the Localized Surface Plasmon Resonance for plasmonic nanoparticles has opened new perspectives for optical nanosensors. Today, an issue in plasmonics is the development of large scale and low cost devices. We focus here on the Langmuir-Blodgett technique to self-organize gold nanoparticles (~ 7 nm) into rings (~ 60 nm) via polystyrene-b-polymethylmethacrylate templates. In particular, we investigated the optical properties of organized gold nanoparticle rings over large areas and report experimental evidence for plasmon resonances of both individual nanoparticles and collective modes. This paves the way for designing devices with multiple resonances in the visible-Infra-red spectrum and developing optical sensors.

cond-mat.mes-hall↗
arXiv2012

Axial charges of excited nucleons from CI-fermions

We report lattice QCD results on the axial charges of ground and excited nucleon states of both parities. This is the first study of these quantities with approximately chiral (CI) fermions. Two energy levels in the range of the negative parity resonances N*(1535) and N*(1650) are observed and we determine the axial charge for both. We obtain a small axial charge for one of them, which is consistent with the chiral symmetry restoration in this state as well as with the small axial charge of the N*(1535) predicted within the quark model. This result agrees with the findings of Takahashi et al. obtained with Wilson quarks which violate chiral symmetry for finite lattice spacing. At the same time for the other observed negative parity state we obtain a large axial charge, that is close to the axial charge of the nucleon. This is in disagreement both with the quark model prediction as well as with the chiral restoration but allows for an interpretation as an s-wave π N state.

hep-lat↗
arXiv2009

QPACE -- a QCD parallel computer based on Cell processors

QPACE is a novel parallel computer which has been developed to be primarily used for lattice QCD simulations. The compute power is provided by the IBM PowerXCell 8i processor, an enhanced version of the Cell processor that is used in the Playstation 3. The QPACE nodes are interconnected by a custom, application optimized 3-dimensional torus network implemented on an FPGA. To achieve the very high packaging density of 26 TFlops per rack a new water cooling concept has been developed and successfully realized. In this paper we give an overview of the architecture and highlight some important technical details of the system. Furthermore, we provide initial performance results and report on the installation of 8 QPACE racks providing an aggregate peak performance of 200 TFlops.

hep-lat↗
arXiv2009

Comparison of filtering methods in SU(3) lattice gauge theory

We systematically compare filtering methods used to extract topological excitations from lattice gauge configurations. We show that there is a strong correlation of the topological charge densities obtained by APE and Stout smearing. Furthermore, a first quantitative analysis of quenched and dynamical configurations reveals a crucial difference of their topological structure: the topological charge density is more fragmented, when dynamical quarks are present. This fact also implies that smearing has to be handled with great care, not to destroy these characteristic structures.

hep-lat↗
arXiv2008

Status of the QPACE Project

We give an overview of the QPACE project, which is pursuing the development of a massively parallel, scalable supercomputer for LQCD. The machine is a three-dimensional torus of identical processing nodes, based on the PowerXCell 8i processor. The nodes are connected by an FPGA-based, application-optimized network processor attached to the PowerXCell 8i processor. We present a performance analysis of lattice QCD codes on QPACE and corresponding hardware benchmarks.

hep-lat↗
arXiv2007

Magnetic nanowires as permanent magnet materials

We present the fabrication of metallic magnetic nanowires using a low temperature chemical process. We show that pressed powders and magnetically oriented samples exhibit a very high coercivity (6.5 kOe at 140 K and 4.8 kOe at 300 K). We discuss the magnetic properties of these metamaterials and show that they have the suitable properties to realize "high temperature magnets" competitive with AlNiCo or SmCo permanent magnets. They could also be used as recording media for high density magnetic recording.

cond-mat.mtrl-sci↗
arXiv2007

QCD on the Cell Broadband Engine

We evaluate IBM's Enhanced Cell Broadband Engine (BE) as a possible building block of a new generation of lattice QCD machines. The Enhanced Cell BE will provide full support of double-precision floating-point arithmetics, including IEEE-compliant rounding. We have developed a performance model and applied it to relevant lattice QCD kernels. The performance estimates are supported by micro- and application-benchmarks that have been obtained on currently available Cell BE-based computers, such as IBM QS20 blades and PlayStation 3. The results are encouraging and show that this processor is an interesting option for lattice QCD applications. For a massively parallel machine on the basis of the Cell BE, an application-optimized network needs to be developed.

hep-lat↗
arXiv2007

Dynamical Chirally Improved Quarks: First Results for Hadron Masses

We present first results for a study with two mass-degenerate dynamical Chirally Improved (CI) fermions on lattices of spatial extent 2.4 fm. The CI Dirac operator obeys the Ginsparg-Wilson condition in good approximation. The pion mass we use is still large O(470 MeV) for the 16**3*32 lattices with lattice spacing of 0.15 fm. The hadron masses are obtained with the variational technique and the results compared with earlier quenched calculations with similar lattice parameters. We find indications for the isovector, scalar meson a0(980) near the experimental value, in contradistinction to quenched results which always produced a mass value compatible with the first excitation a0(1450).

hep-lat↗