Searcharxiv⌕ Search

arXiv subjects

T. Mayer

Publications and source records attributed to T. Mayer.

13 recordsLinked to original sources
arXiv2025

CMOS-Compatible, Wafer-Scale Processed Superconducting Qubits Exceeding Energy Relaxation Times of 200us

We present the results of an industry-grade fabrication of superconducting qubits on 200 mm wafers utilizing CMOS-established processing methods. By automated waferprober resistance measurements at room temperature, we demonstrate a Josephson junction fabrication yield of 99.7% (shorts and opens) across more than 10000 junctions and a qubit frequency prediction accuracy of 1.6%. In cryogenic characterization, we provide statistical results regarding energy relaxation times of the qubits with a median T1 of up to 100 us and individual devices consistently approaching 200 us in long-term measurements. This represents the best performance reported so far for superconducting qubits fabricated by industry-grade, wafer-level subtractive processes.

quant-ph↗
arXiv2025

3D-Integrated Superconducting qubits: CMOS-Compatible, Wafer-Scale Processing for Flip-Chip Architectures

In this article, we present a technology development of a superconducting qubit device 3D-integrated by flip-chip-bonding and processed following CMOS fabrication standards and contamination rules on 200 mm wafers. We present the utilized proof-of-concept chip designs for qubit- and carrier chip, as well as the respective front-end and back-end fabrication techniques. In characterization of the newly developed microbump technology based on metallized KOH-etched Si-islands, we observe a superconducting transition of the used metal stacks and radio frequency (RF) signal transfer through the bump connection with negligible attenuation. In time-domain spectroscopy of the qubits we find high yield qubit excitation with energy relaxation times of up to 15 us.

quant-ph↗
arXiv2025

CMOS-compatible processing and room-temperature characterization on wafer-level for scalable quantum computing

We report on an industry-grade CMOS-compatible qubit fabrication approach using a CMOS pilot line, enabling a yield of functional devices reaching 92.8 %, with a resistance spread evaluated across the full wafer 200 mm diameter of 12.4 % and relaxation times (T1) approaching 80 us. Furthermore, we conducted a comprehensive analysis of wafer-scale room temperature (RT) characteristics collected from multiple wafers and fabrication runs, focusing on RT measurements and their correlation to low temperature qubit parameters. From defined test structures, an across-wafer Josephson junction (JJ) area variation of 10.1 % and oxide barrier variation of 7.2 % was calculated. Additionally, from the room-temperature JJ characterization the qubit frequency can be derived on wafer-level applying the Ambegaokar-Baratoff model before low temperature measurements. This sets the stage for pre-cooldown wafer-level JJ evaluation and sorting. In particular, such early-on device characterization and validation are crucial for increasing the fabrication yield and qubit frequency targeting, which currently represent major scaling challenges. Furthermore, it enables the fabrication of large multichip quantum systems in the future. Our analysis highlight the great potential of CMOS-compatible industry-style fabrication of superconducting qubits for scalable quantum computing in a foundry pilot line cleanroom.

quant-ph↗
arXiv2020

Transport properties of band engineered p-n heterostructures of epitaxial Bi$_2$Se$_3$/(Bi$_{1-x}$Sb$_x$)$_2$(Te$_{1-y}$Se$_y$)$_3$ topological insulators

The challenge of parasitic bulk doping in Bi-based 3D topological insulator materials is still omnipresent, especially when preparing samples by molecular beam epitaxy (MBE). Here, we present a heterostructure approach for epitaxial BSTS growth. A thin n-type Bi$_2$Se$_3$ (BS) layer is used as an epitaxial and electrostatic seed which drastically improves the crystalline and electronic quality and reproducibility of the sample properties. In heterostructures of BS with p-type (Bi$_{1-x}$Sb$_x$)$_2$(Te$_{1-y}$Se$_y$)$_3$ (BSTS) we demonstrate intrinsic band bending effects to tune the electronic properties solely by adjusting the thickness of the respective layer. The analysis of weak anti-localization features in the magnetoconductance indicates a separation of top and bottom conduction layers with increasing BSTS thickness. By temperature- and gate-dependent transport measurements, we show that the thin BS seed layer can be completely depleted within the heterostructure and demonstrate electrostatic tuning of the bands via a back-gate throughout the whole sample thickness.

cond-mat.mtrl-sci↗
arXiv2016

Towards carbon nanotube growth into superconducting microwave resonator geometries

The in-place growth of suspended carbon nanotubes facilitates the observation of both unperturbed electronic transport spectra and high-Q vibrational modes. For complex structures integrating, e.g., superconducting rf elements on-chip, selection of a chemically and physically resistant material that survives the chemical vapor deposition (CVD) process provides a challenge. We demonstrate the implementation of molybdenum-rhenium coplanar waveguide resonators that exhibit clear resonant behaviour at cryogenic temperatures even after having been exposed to nanotube growth conditions. The properties of the MoRe devices before and after CVD are compared to a reference niobium device.

cond-mat.mes-hall↗
arXiv2015

Co-sputtered MoRe thin films for carbon nanotube growth-compatible superconducting coplanar resonators

Molybdenum rhenium alloy thin films can exhibit superconductivity up to critical temperatures of $T_c=15\mathrm{K}$. At the same time, the films are highly stable in the high-temperature methane / hydrogen atmosphere typically required to grow single wall carbon nanotubes. We characterize molybdenum rhenium alloy films deposited via simultaneous sputtering from two sources, with respect to their composition as function of sputter parameters and their electronic dc as well as GHz properties at low temperature. Specific emphasis is placed on the effect of the carbon nanotube growth conditions on the film. Superconducting coplanar waveguide resonators are defined lithographically; we demonstrate that the resonators remain functional when undergoing nanotube growth conditions, and characterize their properties as function of temperature. This paves the way for ultra-clean nanotube devices grown in situ onto superconducting coplanar waveguide circuit elements.

cond-mat.mes-hall↗
arXiv2014

Density of states in graphene with vacancies: midgap power law and frozen multifractality

The density of states (DoS), $\varrho(E)$, of graphene is investigated numerically and within the self-consistent T-matrix approximation (SCTMA) in the presence of vacancies within the tight binding model. The focus is on compensated disorder, where the concentration of vacancies, $n_\text{A}$ and $n_\text{B}$, in both sub-lattices is the same. Formally, this model belongs to the chiral symmetry class BDI. The prediction of the non-linear sigma-model for this class is a Gade-type singularity $\varrho(E) \sim |E|^{-1}\exp(-|\log(E)|^{-1/x})$. Our numerical data is compatible with this result in a preasymptotic regime that gives way, however, at even lower energies to $\varrho(E)\sim E^{-1}|\log(E)|^{-\mathfrak{x}}$, $1\leq \mathfrak{x} < 2$. We take this finding as an evidence that similar to the case of dirty d-wave superconductors, also generic bipartite random hopping models may exhibit unconventional (strong-coupling) fixed points for certain kinds of randomly placed scatterers if these are strong enough. Our research suggests that graphene with (effective) vacancy disorder is a physical representative of such systems.

cond-mat.mes-hall↗
arXiv2005

Spin dynamics in HTSC cuprates: The singlet--correlated band (or t-J-V) model and its applications

So far calculations of the spin susceptibility in the superconducting state of cuprates have been performed in the framework of weak-coupling approximations. However, it is known that cuprates belong to Mott-Hubbard doped materials where electron correlations are important. In this paper an analytical expression for the spin susceptibility in the superconducting state of cuprates is derived within the singlet-correlated band model, which takes into account strong correlations. The expression of the spin susceptibility is evaluated using values for the hopping parameters adapted to measurements of the Fermi surface of the materials YBa2Cu3O7 and Bi2Sr2CaCu2O8. We show that the available experimental data which are directly related to the spin susceptibility can be explained consistently within one set of model parameters for each material. These experiments include the magnetic resonance peak observed by inelastic neutron scattering and the temperature dependence of the NMR spin shift, spin-spin and spin-lattice relaxation rates in the superconducting state.

cond-mat.supr-con↗
arXiv2002

Chargino Production and Decay in Photon-Photon-Collisions

We discuss the pair production of charginos in collisions of polarized photons $γγ\to \tildeχ_i^+ \tildeχ_i^-$, ($i=1,2$) and the subsequent leptonic decay of the lighter chargino $\tildeχ_1^+ \to \tildeχ_1^0 e^+ ν_e$ including the complete spin correlations. Analytical formulae are given for the polarization and the spin-spin correlations of the charginos. Since the production is a pure QED process the decay dynamics can be studied separately. For high energy photons from Compton backscattering of polarized laser pulses off polarized electron beams numerical results are presented for the cross section, the angular distribution and the forward-backward asymmetry of the decay positron. Finally we study the dependence on the gaugino mass parameter $M_1$ and on the sneutrino mass for a gaugino-like MSSM scenario.

hep-ph↗
arXiv2001

Selectron Pair Production in Electron-Electron-Scattering

We investigate pair production of selectrons in electron-electron-scattering with subsequent decay into an electron and the LSP including ISR and beamstrahlung. This process can be used at a linear collider to measure the selectron masses and the gaugino mass parameter M_1 very precisely.

hep-ph↗
arXiv2001

Determination of the Gaugino Mass Parameter M_1 in Different Linear Collider Modes

We study the different linear collider modes with regard to the determination of the gaugino mass parameter M_1. In a specific mSUGRA inspired scenario we compare four processes with polarized beams: (a) e+ e- --> neutralino_1 neutralino_2 --> neutralino_1 neutralino_1 e+ e-, (b) e- gamma --> neutralino_1 selectron_{L/R} --> neutralino_1 neutralino_1 e-, (c) gamma gamma --> chargino_1^+ chargino_1^- --> neutralino_1 neutralino_1 e+ e- neutrino_e anti-neutrino_e, (d) e- e- --> selectron_{L/R} selectron_{L/R} --> neutralino_1 neutralino_1 e- e-.

hep-ph↗
arXiv2000

Chargino Production and Decay in Photon-Photon-Collisions

We study the production and leptonic decay of charginos in collisions of polarized photon beams including the complete spin correlations. The photons can be generated by Compton backscattering of polarized laser pulses off a polarized electron beam. Since the production process is determined alone by the electromagnetic coupling of the charginos this process allows to study their decay dynamics. The cross section and the forward-backward asymmetry of the decay lepton are very sensitive to the gaugino mass parameter $M_1$ and to the sneutrino mass without any ambiguities.

hep-ph↗