arXiv subjects

T. Mussenbrock

Publications and source records attributed to T. Mussenbrock.

12 recordsLinked to original sources

arXiv2023

Plasma sheath tailoring by a magnetic field for three-dimensional plasma etching

Three-dimensional (3D) etching of materials by plasmas is an ultimate challenge in microstructuring applications. A method is proposed to reach a controllable 3D structure by using masks in front of the surface in a plasma etch reactor in combination with local magnetic fields to steer the incident ions in the plasma sheath region towards the surface to reach 3D directionality during etching and deposition. This effect can be controlled by modifying the magnetic field and/or plasma properties to adjust the relationship between sheath thickness and mask feature size. Since the guiding length scale is the plasma sheath thickness, which for typical plasma densities is at least 10s of microns or larger, controlled directional etching and deposition target the field of microstructuring, e.g. of solids for sensors, optics, or microfluidics. In this proof-of-concept study, it is shown that $\vec{E}\times\vec{B}$ drifts tailor the local sheath expansion, thereby controlling the plasma density distribution and the transport when the plasma penetrates the mask during an RF cycle. This modified local plasma creates a 3D etch profile. This is shown experimentally as well as using 2d3v Particle-In-Cell/Monte Carlo collisions simulation.

physics.plasm-ph↗

arXiv2023

Generation of energetic electrons by surface waves in VHF CCPs

Capacitively coupled plasmas (CCP) comprise one of the main tool in active use in the plasma processing industry. However, increasing the driving frequency and electrode size is limited by the emergence of plasma radial nonuniformity detrimental for applications. The nonuniformity is caused by interactions of surface waves natural to the plasma-filled reactor with electrons of the plasma, leading to the complex electron energization and ionization dynamics. Using a self-consistent fully electromagnetic energy- and charge-conserving implicit particle-in-cell code ECCOPIC2M, we demonstrate that the electron energization and ionization profiles result from an involved interplay between different phenomena, demanding a kinetic and non-local description for the low pressures considered. Changes in the surface wave excitation with the driving frequency are discussed.

physics.plasm-ph↗

arXiv2022

Modeling of very high frequency large-electrode capacitively coupled plasmas with a fully electromagnetic particle-in-cell code

Phenomena taking place in capacitively coupled plasmas with large electrodes and driven at very high frequencies are studied numerically utilizing a novel energy- and charge-conserving implicit fully electromagnetic particle-in-cell / Monte Carlo code ECCOPIC2M. The code shows a good agreement with different cases having various collisionality and absorbed power. Although some aspects of the underlying physics were demonstrated in the previous literature with other models, the particle-in-cell method is advantageous for the predictive modeling due to a complex interplay between the surface mode excitations and the nonlocal physics of the corresponding type of plasma discharges operated at low pressures, which is hard to reproduce in other models realistically.

physics.plasm-ph↗

arXiv2021

Computational study of simultaneous positive and negative streamer propagation in a twin surface dielectric barrier discharge via 2D PIC simulations

The propagation mechanisms of plasma streamers have been observed and investigated in a surface dielectric barrier discharge (SDBD) using 2D particle in cell simulations. The investigations are carried out under a simulated air mixture, 80\% N$_2$ and 20\% O$_2$, at atmospheric pressure, 100$\,$kPa, under both DC conditions and a pulsed DC waveform that represent AC conditions. The simulated geometry is a simplification of the symmetric and fully exposed SDBD resulting in the simultaneous ignition of both positive and negative streamers on either side of the Al$_2$O$_3$ dielectric barrier. In order to determine the interactivity of the two streamers, the propagation behavior for the positive and negative streamers are investigated both independently and simultaneously under identical constant voltage conditions. An additional focus is implored under a fast sub nanosecond rise time square voltage pulse alternating between positive and negative voltage conditions, thus providing insight into the dynamics of the streamers under alternating polarity switches. It is shown that the simultaneous ignition of both streamers, as well as using the pulsed DC conditions, provides both an enhanced discharge and an increased surface coverage. It is also shown that additional streamer branching may occur in a cross section that is difficult to experimentally observe. The enhanced discharge and surface coverage may be beneficial to many applications such as, but are not limited to: air purification, volatile organic compound removal, and plasma enhanced catalysis.

physics.plasm-ph↗

arXiv2021

Ion dynamics in capacitively coupled argon-xenon discharges

An argon-xenon (Ar/Xe) plasma is used as a model system for complex plasmas. Based on this system, symmetric low-pressure capacitively coupled radio-frequency discharges are examined utilizing Particle-In-Cell/Monte Carlo Collisions (PIC/MCC) simulations. In addition to the simulation, an analytical energy balance model fed with the simulation data is applied to analyze the findings further. This work focuses on investigating the ion dynamics in a plasma with two ion species and a gas mixture as background. By varying the gas composition and driving voltage of the single-frequency discharge, fundamental mechanics of the discharge, such as the evolution of the plasma density and the energy dispersion, are discussed. Thereby, close attention is paid to these measures' influence on the ion energy distribution functions at the electrode surfaces. The results show that both the gas composition and the driving voltage can significantly impact the ion dynamics. The mixing ratio of argon to xenon allows for shifting the distribution function for one ion species from collisionless to collision dominated. The mixing ratio serves as a control parameter for the ion flux and the impingement energy of ions at the surfaces. Additionally, a synergy effect between the ionization of argon and the ionization of xenon is found and discussed.

physics.plasm-ph↗

arXiv2015

Kinetic Interpretation of Resonance Phenomena in Low Pressure Capacitively Coupled Radio Frequency Plasmas

The kinetic origin of resonance phenomena in capacitively coupled radio frequency plasmas is discovered based on particle-based numerical simulations. The analysis of the spatio-temporal distributions of plasma parameters such as the densities of hot and cold electrons, as well as the conduction and displacement currents reveals the mechanism of the formation of multiple electron beams during sheath expansion. The interplay between highly energetic beam electrons and low energetic bulk electrons is identified as the physical origin of the excitation of harmonics in the current.

physics.plasm-ph↗

arXiv2015

The effect of the driving frequency on the confinement of beam electrons and plasma density in low pressure capacitive discharges

The effect of changing the driving frequency on the plasma density and the electron dynamics in a capacitive radio-frequency argon plasma operated at low pressures of a few Pa is investigated by Particle in Cell/Monte Carlo Collisions simulations and analytical modeling. In contrast to previous assumptions the plasma density does not follow a quadratic dependence on the driving frequency in this non-local collisionless regime. Instead, a step-like increase at a distinct driving frequency is observed. Based on the analytical power balance model, in combination with a detailed analysis of the electron kinetics, the density jump is found to be caused by an electron heating mode transition from the classical $α$-mode into a low density resonant heating mode characterized by the generation of two energetic electron beams at each electrode per sheath expansion phase. These electron beams propagate through the bulk without collisions and interact with the opposing sheath. In the low density mode, the second beam is found to hit the opposing sheath during its collapse. Consequently, a high number of energetic electrons is lost at the electrodes resulting in a poor confinement of beam electrons in contrast to the classical $α$-mode observed at higher driving frequencies. Based on the analytical model this modulated confinement quality and the related modulation of the energy lost per electron lost at the electrodes is demonstrated to cause the step-like change of the plasma density. The effects of a variation of the electrode gap, the neutral gas pressure, the electron sticking and secondary electron emission coefficients of the electrodes on this step-like increase of the plasma density are analyzed based on the simulation results.

physics.plasm-ph↗

arXiv2013

An algebraic RF sheath model for all excitation waveforms and amplitudes, and all levels of collisionality

The boundary sheath of a low temperature plasma comprises typically only a small fraction of its volume but is responsible for many aspects of the macroscopic behavior. A thorough understanding of the sheath dynamics is therefore of theoretical and practical importance. This work focusses on the so-called "algebraic" approach which strives to describe the electrical behavior of RF modulated boundary sheaths in closed analytical form, i.e., without the need to solve differential equations. A mathematically simple, analytical expression for the charge-voltage relation of a sheath is presented which holds for all excitation wave forms and amplitudes and covers all regimes from the collision-less motion at low gas pressure to the collision dominated motion at gas high pressure. A comparison with the results of self-consistent particle-in-cell simulations is also presented.

physics.plasm-ph↗

arXiv2013

Ionization by bulk heating of electrons in capacitive radio frequency atmospheric pressure microplasmas

Electron heating and ionization dynamics in capacitively coupled radio frequency (RF) atmospheric pressure microplasmas operated in helium are investigated by Particle in Cell simulations and semi-analytical modeling. A strong heating of electrons and ionization in the plasma bulk due to high bulk electric fields are observed at distinct times within the RF period. Based on the model the electric field is identified to be a drift field caused by a low electrical conductivity due to the high electron-neutral collision frequency at atmospheric pressure. Thus, the ionization is mainly caused by ohmic heating in this "Omega-mode". The phase of strongest bulk electric field and ionization is affected by the driving voltage amplitude. At high amplitudes, the plasma density is high, so that the sheath impedance is comparable to the bulk resistance. Thus, voltage and current are about 45° out of phase and maximum ionization is observed during sheath expansion with local maxima at the sheath edges. At low driving voltages, the plasma density is low and the discharge becomes more resistive resulting in a smaller phase shift of about 4°. Thus, maximum ionization occurs later within the RF period with a maximum in the discharge center. Significant analogies to electronegative low pressure macroscopic discharges operated in the Drift-Ambipolar mode are found, where similar mechanisms induced by a high electronegativity instead of a high collision frequency have been identified.

physics.plasm-ph↗

arXiv2013

Kinetic simulation of the sheath dynamics in the intermediate radio-frequency regime

The dynamics of temporally modulated plasma boundary sheaths is studied in the intermediate radio frequency regime where the applied radio frequency and the ion plasma frequency are comparable. Two kinetic simulation codes are employed and their results are compared. The first code is a realization of the well-known scheme, Particle-In-Cell with Monte Carlo collisions (PIC/MCC) and simulates the entire discharge, a planar radio frequency capacitively coupled plasma (RF-CCP) with an additional heating source. The second code is based on the recently published scheme Ensemble-in-Spacetime (EST); it resolves only the sheath and requires the time resolved voltage across and the ion flux into the sheath as input. Ion inertia causes a temporal asymmetry (hysteresis) of the sheath charge-voltage relation; also other ion transit time effects are found. The two codes are in good agreement, both with respect to the spatial and temporal dynamics of the sheath and with respect to the ion energy distributions at the electrodes. It is concluded that the EST scheme may serve as an efficient post-processor for fluid or global simulations and for measurements: It can rapidly and accurately calculate ion distribution functions even when no genuine kinetic information is available.

physics.plasm-ph↗

arXiv2012

Simulation benchmarks for low-pressure plasmas: capacitive discharges

Benchmarking is generally accepted as an important element in demonstrating the correctness of computer simulations. In the modern sense, a benchmark is a computer simulation result that has evidence of correctness, is accompanied by estimates of relevant errors, and which can thus be used as a basis for judging the accuracy and efficiency of other codes. In this paper, we present four benchmark cases related to capacitively coupled discharges. These benchmarks prescribe all relevant physical and numerical parameters. We have simulated the benchmark conditions using five independently developed particle-in-cell codes. We show that the results of these simulations are statistically indistinguishable, within bounds of uncertainty that we define. We therefore claim that the results of these simulations represent strong benchmarks, that can be used as a basis for evaluating the accuracy of other codes. These other codes could include other approaches than particle-in-cell simulations, where benchmarking could examine not just implementation accuracy and efficiency, but also the fidelity of different physical models, such as moment or hybrid models. We discuss an example of this kind in an appendix. Of course, the methodology that we have developed can also be readily extended to a suite of benchmarks with coverage of a wider range of physical and chemical phenomena.

physics.plasm-ph↗

arXiv2011

Understanding Microplasmas

Microplasmas are operated around atmospheric pressure exhibiting pronounced non-equilibrium characteristics, i.e. they possess energetic electrons while ions and neutrals remain cold. They have gained significant interest due to their enormous application potential e.g. in the biomedical, surface modification and light source areas, just to name a few. Many different configurations are in use. Their understanding and quantification is mandatory for further progress in applications. We report on recent progress in the diagnostics and simulation of the entire microplasma system from gas introduction, via the plasma discharge up to the samples at the example of a plasma jet operated in He/O2 in an ambient air environment.

physics.plasm-ph↗