arXiv subjects

T. Proslier

Publications and source records attributed to T. Proslier.

15 recordsLinked to original sources

arXiv2024

Crystallinity in Niobium oxides: A pathway to mitigate Two-Level System Defects in Niobium 3D Resonator for quantum applications

Materials imperfections in Nniobium based superconducting quantum circuits, in particular, two-level-system (TLS) defects, are a major source of decoherence, ultimately limiting the performance of quantum computation and sensing. Thus, identifying and understanding the microscopic origin of possible TLS defects in these devices and developing strategies to eliminate them is key to superconducting qubit performance improvement. In this paper, we demonstrate the reduction of two-level system losses in three-dimensional superconducting radio frequency (SRF) niobium resonators by a 10-hour high vacuum (HV) heat treatment at 650{\deg}C, even after exposure to air and high pressure rinsing (HPR). By probing the effect of this annealing on niobium samples using X-ray photoelectron spectroscopy (XPS) and high-resolution scanning transmission electron microscopy (STEM), we witness an alteration of the native oxide composition re-grown after air exposure and HPR and the creation of nano-scale crystalline oxide regions, which correlates with the measured tenfold quality factor enhancement at low fields of the 1.3 GHz niobium resonator.

physics.app-ph↗

arXiv2023

Recent advances in metallographic polishing for SRF application

This paper is an overview of the metallographic polishing R&D program covering Niobium and Copper substrates treatment for thin film coating as an alternative fabrication pathway for 1.3 GHz elliptical cavities. The presented research is the result of a collaborative effort between IJCLab, CEA/Irfu, HZB, and KEK in order to develop innovative surface processing and cavity fabrication protocols capable of meeting stringent requirements for SRF surfaces, including the reduction of safety risks and ecological footprint, enhancing reliability, improving the surface roughness, and potentially allowing cost reduction. The research findings will be disclosed.

physics.acc-ph↗

arXiv2022

Next-Generation Superconducting RF Technology based on Advanced Thin Film Technologies and Innovative Materials for Accelerator Enhanced Performance and Energy Reach

Superconducting RF is a key technology for future particle accelerators, now relying on advanced surfaces beyond bulk Nb for a leap in performance and efficiency. The SRF thin film strategy aims at transforming the current SRF technology by using highly functional materials, addressing all the necessary functions. The community is deploying efforts in three research thrusts to develop next-generation thin-film based cavities. Nb on Cu cavities are developed to perform as good as or better than bulk Nb at reduced cost and with better thermal stability. Recent results showing improved accelerating field and dramatically reduced Q slope show their potential for many applications. The second research thrust is to develop cavities coated with materials that can operate at higher temperatures or sustain higher fields. Proof of principle has been established for the merit of Nb3Sn for SRF application. Research is now needed to further exploit the material and reach its full potential with novel deposition techniques. The third line of research is to push SRF performance beyond the capabilities of the superconductors alone with multilayered coatings. In parallel, developments are needed to provide quality substrates, cooling schemes and cryomodule design tailored to thin film cavities. Recent results in these three research thrusts suggest that SRF thin film technologies are at the eve of a technological revolution. For them to mature, active community support and sustained funding are needed to address fundamental developments supporting material deposition techniques, surface and RF research, technical challenges associated with scaling and industrialization. With dedicated and sustained investment, next-generation thin-film based cavities will become a reality with high performance and efficiency, facilitating energy sustainable science while enabling higher luminosity, and higher energy.

physics.acc-ph↗

arXiv2022

European Strategy for Particle Physics -- Accelerator R&D Roadmap

The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified in the Strategy update. The R&D objectives include: improvement of the performance and cost-performance of magnet and radio-frequency acceleration systems; investigations of the potential of laser / plasma acceleration and energy-recovery linac techniques; and development of new concepts for muon beams and muon colliders. The goal of the roadmap is to document the collective view of the field on the next steps for the R&D programme, and to provide the evidence base to support subsequent decisions on prioritisation, resourcing and implementation.

physics.acc-ph↗

arXiv2019

Superconducting phase transitions in disordered NbTiN films

The suppression of superconductivity in disordered systems is a fundamental problem of condensed matter physics. Here we investigate the superconducting niobium-titanium-nitride (Nb_{1-x}Ti_{x}N) thin films grown by atomic layer deposition (ALD) where disorder is controlled by the slight tuning of the ALD process parameters. We observe the smooth crossover from the disorder-driven superconductor-normal metal transition (often reffered to as fermionic mechanism) to the case where bosonic mechanism dominates and increasing disorder leads to formation of metal with Cooper pairing. We show that, in moderately disordered films, the transition to zero-resistance state occurs in a full agreement with the conventional theories of superconducting fluctuations and Berezinskii-Kosterlitz-Thouless transition. However, the critically disordered films violate this accord showing low-temperature features possibly indicating the Bose metal phase. We show that it is the interrelation between film's sheet resistance in the maximum, R_{max}, of the resistive curve R(T) and R_q = h/4e^2 that distinguishes between these two behaviors. We reveal the characteristic features in magnetoresistance of the critically disordered films with R_{max} > R_q

cond-mat.supr-con↗

arXiv2018

Insight into bulk niobium superconducting RF cavities performances by tunneling spectroscopy

Point contact tunneling (PCT) spectroscopy measurements are reported over wide areas of cm-sized cut outs from niobium superconducting RF cavities. A comparison is made between a high-quality, conventionally processed (CP) cavity with a high field Q drop for acceleration field E $>$ 20 MV/m and a nitrogen doped (N-doped) cavity that exhibits an increasing Q up to fields approaching 15 MV/m. The CP cavity displays hot spot regions at high RF fields where Q-drop occurs as well as unaffected regions (cold spots). PCT data on cold spots reveals a near ideal BCS density of states (DOS) with gap parameters, $Δ$ as high as 1.62 meV, that are among the highest values ever reported for Nb. Hot spot regions exhibit a wide distribution of gap values down to $Δ\sim$ 1.0 meV and DOS broadening characterized by a relatively large value of pair-breaking rate, $Γ$, indicating surface regions of significantly reduced superconductivity. In addition, hot spots commonly exhibit Kondo tunneling peaks indicative of surface magnetic moments attributed to a defective oxide. N-doped cavities reveal a more homoegeneous gap distribution centered at $Δ\sim$ 1.5 meV and relatively small values of $Γ/Δ$. The absence of regions of significantly reduced superconductivity indicates that the N interstitials are playing an important role in preventing the formation of hydride phases and other macroscopic defects which might otherwise severely affect the local, surface superconductivity that lead to hot spot formation. The N-doped cavities also display a significantly improved surface oxide, i.e., increased thickness and tunnel barrier height, compared to CP cavities. These results help explain the improved performance of N-doped cavities and give insights into the origin of the initial increasing Q with RF amplitude.

cond-mat.supr-con↗

arXiv2017

A low energy muon spin rotation and point contact tunneling study of niobium films prepared for superconducting cavities

Point contact tunneling (PCT) and low energy muon spin rotation (LE-muSR) are used to probe, on the same samples, the surface superconducting properties of micrometer thick niobium films deposited onto copper substrates using different sputtereing techniques: diode, dc magnetron (dcMS) and HIPIMS. The combined results are compared to radio-frequency tests performances of RF cavities made with the same processes. Degraded surface superconducting properties are found to yield lower quality factors and stronger Q slope. In addition, both techniques find evidence for surface paramagnetism on all samples and particularly on Nb films prepared by HIPIMS.

cond-mat.supr-con↗

arXiv2015

Giant two-phonon Raman scattering from nanoscale NbC precipitates in Nb

High purity niobium (Nb), subjected to the processing methods used in the fabrication of superconducting RF cavities, displays micron-sized surface patches containing excess carbon. High-resolution transmission electron microscopy and electron energy-loss spectroscopy measurements are presented which reveal the presence of nanoscale NbC coherent precipitates in such regions. Raman backscatter spectroscopy on similar surface regions exhibit spectra consistent with the literature results on bulk NbC but with significantly enhanced two-phonon scattering. The unprecedented strength and sharpness of the two-phonon signal has prompted a theoretical analysis, using density functional theory (DFT), of phonon modes in NbC for two different interface models of the coherent precipitate. One model leads to overall compressive strain and a comparison to ab-initio calculations of phonon dispersion curves under uniform compression of the NbC shows that the measured two-phonon peaks are linked directly to phonon anomalies arising from strong electron-phonon interaction. Another model of the extended interface between Nb and NbC, studied by DFT, gives insight into the frequency shifts of the acoustic and optical mode density of states measured by first order Raman. The exact origin of the stronger two-phonon response is not known at present but it suggests the possibility of enhanced electron-phonon coupling in transition metal carbides under strain found either in the bulk NbC inclusions or at their interfaces with Nb metal. Preliminary tunneling studies using a point contact method show some energy gaps larger than expected for bulk NbC.

cond-mat.supr-con↗

arXiv2013

Effect of high temperature heat treatments on the quality factor of a large-grain superconducting radio-frequency niobium cavity

Large-grain Nb has become a viable alternative to fine-grain Nb for the fabrication of superconducting radio-frequency cavities. In this contribution we report the results from a heat treatment study of a large-grain 1.5 GHz single-cell cavity made of "medium purity" Nb. The baseline surface preparation prior to heat treatment consisted of standard buffered chemical polishing. The heat treatment in the range 800 - 1400 C was done in a newly designed vacuum induction furnace. Q0 values of the order of 2x1010 at 2.0 K and peak surface magnetic field (Bp) of 90 mT were achieved reproducibly. A Q0-value of (5+-1)1010 at 2.0 K and Bp = 90 mT was obtained after heat treatment at 1400 C. This is the highest value ever reported at this temperature, frequency and field. Samples heat treated with the cavity at 1400 C were analyzed by secondary ion mass spectrometry, secondary electron microscopy, energy dispersive X-ray, point contact tunneling and X-ray diffraction and revealed a complex surface composition which includes titanium oxide, increased carbon and nitrogen content but reduced hydrogen concentration compared to a non heat-treated sample.

cond-mat.supr-con↗

arXiv2010

Rebuttal to "Comment by V.M. Krasnov on 'Counterintuitive consequence of heating in strongly-driven intrinsic junctions of Bi2Sr2CaCu2O8+d Mesas' "

In our article [1], we found that with increasing dissipation there is a clear, systematic shift and sharpening of the conductance peak along with the disappearance of the higher-bias dip/hump features (DHF), for a stack of intrinsic Josephson junctions (IJJs) of intercalated Bi2Sr2CaCu2O8+δ (Bi2212). Our work agrees with Zhu et al [2] on unintercalated, pristine Bi2212, as both studies show the same systematic changes with dissipation. The broader peaks found with reduced dissipation [1,2] are consistent with broad peaks in the density-of-states (DOS) found among scanning tunneling spectroscopy [3] (STS), mechanical contact tunneling [4] (MCT) and inferred from angle (momentum) resolved photoemission spectroscopy [5] (ARPES); results that could not be ignored. Thus, sharp peaks are extrinsic and cannot correspond to the superconducting DOS. We suggested that the commonality of the sharp peaks in our conductance data, which is demonstrably shown to be heating-dominated, and the peaks of previous intrinsic tunneling spectroscopy (ITS) data implies that these ITS reports might need reinterpretation.

cond-mat.supr-con↗

arXiv2010

Modeling Vacuum Arcs

We are developing a model of vacuum arcs. This model assumes that arcs develop as a result of mechanical failure of the surface due to Coulomb explosions, followed by ionization of fragments by field emission and the development of a small, dense plasma that interacts with the surface primarily through self sputtering and terminates as a unipolar arc capable of producing breakdown sites with high enhancement factors. We have attempted to produce a self consistent picture of triggering, arc evolution and surface damage. We are modeling these mechanisms using Molecular Dynamics (mechanical failure, Coulomb explosions, self sputtering), Particle-In-Cell (PIC) codes (plasma evolution), mesoscale surface thermodynamics (surface evolution), and finite element electrostatic modeling (field enhancements). We can present a variety of numerical results. We identify where our model differs from other descriptions of this phenomenon.

physics.plasm-ph↗

arXiv2009

Counterintuitive Consequence of Heating in Strongly-Driven Intrinsic-Junctions of Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8+δ}$ Mesas

Anomalously high and sharp peaks in the conductance of intrinsic Josephson junctions in Bi$_{2}$Sr$_{2}$CaCu$_{2}$O$_{8+δ}$ (Bi2212) mesas have been universally interpreted as superconducting energy gaps, but here we show they are a result of heating. This interpretation follows from a direct comparison to the equilibrium gap, $\mathit Δ$, measured in break junctions on similar Bi2212 crystals. As the dissipated power increases with a greater number of junctions in the mesa, the conductance peak abruptly sharpens and its voltage decreases to well below 2$\mathit Δ$. This sharpening, found in our experimental data, defies conventional intuition of heating effects on tunneling spectra, but it can be understood as an instability into a nonequilibrium two-phase coexistent state. The measured peak positions occur accurately within the voltage range that an S-shaped backbending is found in the {\it calculated} current-voltage curves for spatially {\it uniform} self-heating and that S-shape implies the potential for the uniform state to be unstable.

cond-mat.supr-con↗

arXiv2008

Improvement and protection of niobium surface superconductivity by Atomic Layer Deposition and heat treatment

A method to treat the surface of Nb is described which potentially can improve the performance of superconducting RF cavities. We present tunneling and x-ray photoemission spectroscopy (XPS) measurements at the surface of cavity-grade niobium samples coated with a 3 nm alumina overlayer deposited by Atomic Layer Deposition (ALD). The coated samples baked in ultra high vacuum (UHV) at low temperature reveal at first degraded superconducting surface. However, at temperatures above 450C, the tunneling conductance curves show significant improvements of the superconducting density of states (DOS) compared with untreated surfaces.

cond-mat.supr-con↗

arXiv2008

Tunneling study of cavity grade Nb: possible magnetic scattering at the surface

Tunneling spectroscopy was performed on Nb pieces prepared by the same processes used to etch and clean superconducting radio frequency (SRF) cavities. Air exposed, electropolished Nb exhibited a surface superconducting gap delta=1.55 meV, characteristic of clean, bulk Nb. However the tunneling density of states (DOS) was broadened significantly. The Nb pieces treated with the same mild baking used to improve the Q-slope in SRF cavities, reveal a sharper DOS. Good fits to the DOS were obtained using Shiba theory, suggesting that magnetic scattering of quasiparticles is the origin of the gapless surface superconductivity and a heretofore unrecognized contributor to the Q-slope problem of Nb SRF cavities.

cond-mat.supr-con↗

arXiv2004

Fabrication and characterization of scanning tunneling microscopy superconducting Nb tips having highly enhanced critical fields

We report a simple method for the fabrication of Niobium superconducting (SC) tips for scanning tunnelling microscopy which allow atomic resolution. The tips, formed in-situ by the mechanical breaking of a niobium wire, reveal a clear SC gap of 1.5 meV and a critical temperature Tc=9.2+-0.3 K as deduced from Superconductor Insulator Normal metal (NIS) and Superconductor Insulator Superconductor (SIS) spectra. These match the values of bulk Nb samples. We systematically find an enhanced value of the critical magnetic field in which superconductivity in the tip is destroyed (around 1 T for some tips) up to five times larger than the critical field of bulk Nb (0.21 T). Such enhancement is attributed to a size effect at the tip apex

cond-mat.supr-con↗