arXiv subjects

T. Schumm

Publications and source records attributed to T. Schumm.

At least 19 recordsLinked to original sources

arXiv2026

Exploring $\alpha$- and $\beta$-decay-induced quenching of the $^{229}$Th nuclear-clock isomer in solid-state hosts

The radiative decay dynamics of an ensemble of $^{229\mathrm{m}}$Th nuclei embedded in CaF$_2$ and MgF$_2$ is investigated. The isomer is populated through $\beta$ decay of $^{229}$Ac following ion implantation, and its radiative decay is detected using vacuum-ultraviolet spectroscopy and measured as a function of time. This allows to identify and quantify the quenching of the radiative-decay signal induced by $\alpha$ or $\beta$ radiation. The quenching probability density is determined in different CaF$_2$ crystals and in a MgF$_2$ crystal, revealing differences up to two orders of magnitude between the investigated samples and a strong dependence on the host material and defect densities. The results support a microscopic mechanism mediated by charge carriers in which electronic excitations created by the decay radiation are captured near Th defects, thereby favoring non-radiative decay channels.

nucl-ex↗

arXiv2026

A thorium-229 optical nuclear clock with feedback loop

The laser-accessible nuclear transition in the thorium-229 isotope has been identified as a promising candidate for the realization of an optical nuclear clock. Such a nuclear clock might rival or outperform current optical clocks based on electron-shell transitions in atoms or ions, is expected to be more robust against external perturbations, and provides enhanced sensitivity in clock-based tests of fundamental principles of physics. Here, we implement a thorium-229 nuclear clock by stabilizing a continuous-wave laser to the 148 nm nuclear transition with rapid feedback based on continuous absorption spectroscopy. The thorium-229 nuclei are embedded into a millimeter-sized, room temperature calcium fluoride crystal. A subharmonic of the 148 nm radiation is continuously compared to a Yb+ single-ion clock. The nuclear clock shows a simple shot-noise limited scaling of the fractional frequency instability of $3\cdot 10^{-12} \sqrt{\tau/\text{s}}$ where $\tau$ is the averaging time, approaching $10^{-15}$ instabilities over 1 day of continuous operation. Improvements of the instability by several orders of magnitude can be projected for future solid-state nuclear clocks. We use the nuclear clock to constrain models of ultralight dark matter by searching for periodic fluctuations and slow drifts in the nuclear transition energy, on time scales between 20 s and 1 day. Drawing benefit from the enhanced sensitivity of the thorium-229 transition, these constraints compete with the best atomic clocks concerning dark matter coupling to photons and go beyond previous measurements regarding coupling to the strong force and quarks.

physics.atom-ph↗

arXiv2026

Continuous-wave laser absorption spectroscopy of the Thorium-229 nucleus

A low-energy nuclear transition in the isotope thorium-229 has been excited in thorium-doped crystals with laser light. This opens the perspective towards a highly stable and robust solid-state optical nuclear clock. The required laser radiation at 148 nm wavelength has so far been produced using pulsed laser systems where only a small fraction of the incident photons has been resonant with the narrow nuclear transition. Here we show that the nuclear resonance can be excited with a continuous-wave narrow-bandwidth laser source with a power of less than 1 nW, and that the resonance signal can be detected in absorption rather than in fluorescence. This eliminates the slow nuclear fluorescence decay from the detection process and offers a considerable advantage for clock operation through fast signal acquisition. The VUV laser source is based on three sequential frequency doublings, starting from a diode laser at 1187 nm that is well suited for linewidth narrowing and for frequency comparisons with optical atomic clocks. We use absorption spectroscopy for the quantitative characterization of two different Th-centers in calcium fluoride crystal and measure the isomeric shift between them. One of the centers shows a very small static electric crystal field gradient 0.1 V/$\r{A}^2$, to be compared to gradients in the range of 100 V/$\r{A}^2$ observed earlier. This indicates a center with high symmetry of the ions surrounding the Th nucleus, promising nuclear resonance lines that are nearly independent of the lattice spacing.

physics.atom-ph↗

arXiv2026

Cascaded multi-harmonic generation in a \b{eta}-BBO crystal reaching 133 nm from a single 800 nm pump beam

Nonlinear crystals are widely used to efficiently generate second or third harmonics, and also for frequency mixing. Generation of multiple cascaded harmonics simultaneously, however, appears much less studied, although supported by the usually large nonlinearity of these crystals. Here, we demonstrate the generation of multiple harmonics up to 6th order in a \b{eta}-BBO crystal, extending into the vacuum ultraviolet spectral range. Phase matched generation of the second or the third harmonic is directly driven by a single 800 nm Ti:sapphire oscillator beam. Our study reveals that the harmonics are generated by \c{hi}(2):\c{hi}(2) and \c{hi}(2):\c{hi}(3) cascaded processes and intense harmonic signals are obtained even for the 5th and 6th harmonics, where the \b{eta}-BBO crystal is mostly absorbing. While higher order harmonics cannot be phase matched simultaneously, limiting the harmonic amplitudes, even the weakest harmonics are more than three orders of magnitude above the measurement noise limit, making them suitable for many spectroscopic applications.

physics.optics↗

arXiv2024

Laser-Induced Quenching of the Th-229 Nuclear Clock Isomer in Calcium Fluoride

The 10-minute radiative lifetime of the first excited $^{229}$Th$^{4+}$ nuclear state in ionic crystals provides narrow spectroscopic linewidths, enabling the realization of a solid-state nuclear clock. Due to the 4+ noble gas configuration, electronic readout or state initialization schemes known from atomic clocks are inaccessible. This elongates the interrogation cycle, which will deteriorate the clock performance. To address this limitation we demonstrate laser-induced quenching (LIQ) as a method of depumping the $^{229}$Th isomer population in CaF$_2$. We provide experimental evidence for LIQ at different wavelengths (148 - 420 nm) and temperatures (100 - 350 K), achieving a threefold reduction in the isomer lifetime with 20 mW of laser power.

physics.atom-ph↗

arXiv2024

Radiative Decay of the $^{229m}$Th Nuclear Clock Isomer in Different Host Materials

A comparative vacuum ultraviolet spectroscopy study conducted at ISOLDE-CERN of the radiative decay of the $^{229m}$Th nuclear clock isomer embedded in different host materials is reported. The ratio of the number of radiative decay photons and the number of $^{229m}$Th embedded are determined for single crystalline CaF$_2$, MgF$_2$, LiSrAlF$_6$, AlN, and amorphous SiO$_2$. For the latter two materials, no radiative decay signal was observed and an upper limit of the ratio is reported. The radiative decay wavelength was determined in LiSrAlF$_6$ and CaF$_2$, reducing its uncertainty by a factor of 2.5 relative to our previous measurement. This value is in agreement with the recently reported improved values from laser excitation.

nucl-ex↗

arXiv2022

Probing the surface of silicon and the silicon-silica interface using nonperturbative third and fifth harmonic generation

We examined, in backward (reflection) geometry, the generation of the 3rd and 5th harmonics, located in the deep and vacuum ultraviolet, on the surface of silicon and on the interface between silicon and silica when a thin silica film was grown on a silicon substrate. In both cases, a strong dependence of the harmonic signal on the polarization direction of the driving laser beam was found. The differences observed for both samples, are qualitatively explained. Furthermore, a simplified tensor formalism for the polarization dependence is introduced, which reveals the structural symmetry of the surface and the interface and describes the polarization dependence with high accuracy. The study is an essential step to further understand nonlinear interaction and nonperturbative harmonic generation on the boundaries of materials.

physics.optics↗

arXiv2022

New Horizons: Scalar and Vector Ultralight Dark Matter

The last decade has seen unprecedented effort in dark matter model building at all mass scales coupled with the design of numerous new detection strategies. Transformative advances in quantum technologies have led to a plethora of new high-precision quantum sensors and dark matter detection strategies for ultralight ($<10\,$eV) bosonic dark matter that can be described by an oscillating classical, largely coherent field. This white paper focuses on searches for wavelike scalar and vector dark matter candidates.

hep-ex↗

arXiv2021

Group delay dispersion tuned femtosecond Kerr-lens mode-locked Ti:sapphire laser

We report on a new design for a femtosecond Ti:sapphire oscillator in which dispersion compensation is realized exclusively using mirrors, including special mirrors with third order dispersion. This makes the oscillator dynamically tunable over a spectral range of 45 nm using an intracavity wedge-pair; and it delivers 40 fs pulses at 80 MHz repetition rate. Due to the all-mirror design, the oscillator represents an attractive base for a tunable frequency comb for high precision spectroscopy applications.

physics.optics↗

arXiv2020

Nuclear clocks for testing fundamental physics

The low-energy, long-lived isomer in $^{229}$Th, first studied in the 1970s as an exotic feature in nuclear physics, continues to inspire a multidisciplinary community of physicists. Using the nuclear resonance frequency, determined by the strong and electromagnetic interactions inside the nucleus, it is possible to build a highly precise nuclear clock that will be fundamentally different from all other atomic clocks based on resonant frequencies of the electron shell. The nuclear clock will open opportunities for highly sensitive tests of fundamental principles of physics, particularly in searches for violations of Einstein's equivalence principle and for new particles and interactions beyond the standard model. It has been proposed to use the nuclear clock to search for variations of the electromagnetic and strong coupling constants and for dark matter searches. The $^{229}$Th nuclear optical clock still represents a major challenge in view of the tremendous gap of nearly 17 orders of magnitude between the present uncertainty in the nuclear transition frequency and the natural linewidth. Significant experimental progress has been achieved in recent years, which will be briefly reviewed. Moreover, a research strategy will be outlined to consolidate our present knowledge about essential $^{229\rm{m}}$Th properties, to determine the nuclear transition frequency with laser spectroscopic precision, realize different types of nuclear clocks and apply them in precision frequency comparisons with optical atomic clocks to test fundamental physics. Two avenues will be discussed: laser-cooled trapped $^{229}$Th ions that allow experiments with complete control on the nucleus-electron interaction and minimal systematic frequency shifts, and Th-doped solids enabling experiments at high particle number and in different electronic environments.

quant-ph↗

arXiv2018

All-solid-state VUV frequency comb at 160 nm using multi-harmonic generation in a non-linear femtosecond enhancement cavity

We report on the realization of a solid-state-based vacuum ultraviolet frequency comb, using multi-harmonic generation in an external enhancement cavity. Optical conversions in such arrangements were so-far reported only using gaseous media. We present a theory that allows selecting the most suited solid generation medium for specific target harmonics by adapting the bandgap of the material. Consequently, we experimentally use a thin AlN film grown on a sapphire substrate to realize a compact frequency comb multi-harmonic source in the DUV/VUV spectral range. Extending our earlier VUV source [Opt. Exp. 26, 21900 (2018)] with the enhancement cavity, a sub-Watt level Ti:sapphire femtosecond frequency comb is enhanced to 24 W stored average power, its 3rd, 5th and 7th harmonics are generated, and the target harmonic power at 160 nm increased by two orders of magnitude. The emerging non-linear effects in the solid medium together with suitable intra-cavity dispersion management support optimal enhancement and stable locking. To demonstrate the spectroscopic ability of the realized frequency comb, we report on the beat measurement between the 3rd harmonic beam and a 266 nm CW laser reaching about 1 MHz accuracy.

physics.optics↗

arXiv2018

High harmonic generation from surface states of solids

We demonstrate that high-harmonic generation (HHG) in solids dominantly originates from strongly localized surface states through non-perturbative processes. Measurements reveal that HHG from bulk states is suppressed by at least 1-2 orders of magnitude due to the lack of phase matching, when generated perturbatively, or by at least 3-4 orders of magnitude, when generated non-perturbatively. We derive a theory that fully supports this observation and quantitatively describes the generation of harmonics from the surface states as well as from interfaces between solids; it also predicts a much weaker generation of harmonics from the bulk states. Our results pave the way for the development of very high repetition rate high harmonic sources for vacuum ultraviolet spectroscopy and high precision frequency comb metrology using surface states from solids.

physics.optics↗

arXiv2017

Nuclear resonant scattering experiment with fast time response: new scheme for observation of $^{229\rm m}$Th radiative decay

Nuclear resonant excitation of the 29.19-keV level in $^{229}$Th with high-brilliance synchrotron- radiation and detection of its decay signal, are proposed with the aim of populating the extremely low-energy isomeric state of $^{229}$Th.The proposed experiment, known as nuclear resonant scattering (NRS), has the merit of being free from uncertainties about the isomer level energy. However, it requires higher time resolution and shorter tail in the response function of the detector than that of conventional NRS experiments because of the short lifetime of the 29.19-keV state. We have fabricated an X-ray detector system which has a time resolution of 56 ps and a shorter tail function than the previously reported one. We have demonstrated an NRS experiment with the 26.27-keV nuclear level of $^{201}$Hg for feasibility assessment of the $^{229}$Th experiment. The NRS signal is clearly distinct from the prompt electronic scattering signal by the implemented detector system. The half-life of the 26.27-keV state of $^{201}$Hg is determined as 629 $\pm$ 18 ps which is better precision by a factor three than that reported to date.

nucl-ex↗

arXiv2014

Prospects for measuring the 229Th isomer energy using a metallic magnetic microcalorimeter

The Thorium-229 isotope features a nuclear isomer state with an extremely low energy. The currently most accepted energy value, 7.8 +- 0.5 eV, was obtained from an indirect measurement using a NASA x-ray microcalorimeter with an instrumental resolution 26 eV. We study, how state-of-the-art magnetic metallic microcalorimeters with an energy resolution down to a few eV can be used to measure the isomer energy. In particular, resolving the 29.18 keV doublet in the γ-spectrum following the α-decay of Uranium-233, corresponding to the decay into the ground and isomer state, allows to measure the isomer transition energy without additional theoretical input parameters, and increase the energy accuracy. We study the possibility of resolving the 29.18 keV line as a doublet and the dependence of the attainable precision of the energy measurement on the signal and background count rates and the instrumental resolution.

physics.atom-ph↗

arXiv2013

Atomic clock with nuclear transition: current status in TU Wien

The nucleus of 229Thorium presents a unique isomer state of very low energy and long lifetime, current estimates are around 7.8 eV and seconds to hours respectively. This nuclear transitions therefore is a promising candidate for a novel type of frequency standard and several groups worldwide have set out to investigate this system. Our aim is to construct a "solid state nuclear clock", i.e. a frequency standard where Thorium ions are implanted into Calciumfluoride crystals transparent in vacuum ultraviolet range. As a first step towards an accurate determination of the exact energy and lifetime of this isomer state we perform low-resolution fluorescent spectroscopic measurements.

physics.atom-ph↗

arXiv2012

Performance of a 229 Thorium solid-state nuclear clock

The 7.8 eV nuclear isomer transition in 229 Thorium has been suggested as an etalon transition in a new type of optical frequency standard. Here we discuss the construction of a "solid-state nuclear clock" from Thorium nuclei implanted into single crystals transparent in the vacuum ultraviolet range. We investigate crystal-induced line shifts and broadening effects for the specific system of Calcium fluoride. At liquid Nitrogen temperatures, the clock performance will be limited by decoherence due to magnetic coupling of the Thorium nucleus to neighboring nuclear moments, ruling out the commonly used Rabi or Ramsey interrogation schemes. We propose a clock stabilization based on counting of flourescence photons and present optimized operation parameters. Taking advantage of the high number of quantum oscillators under continuous interrogation, a fractional instability level of 10^{-19} might be reached within the solid-state approach.

physics.atom-ph↗

arXiv2010

Two-point density correlations of quasicondensates in free expansion

We measure the two-point density correlation function of freely expanding quasicondensates in the weakly interacting quasi-one-dimensional (1D) regime. While initially suppressed in the trap, density fluctuations emerge gradually during expansion as a result of initial phase fluctuations present in the trapped quasicondensate. Asymptotically, they are governed by the thermal coherence length of the system. Our measurements take place in an intermediate regime where density correlations are related to near-field diffraction effects and anomalous correlations play an important role. Comparison with a recent theoretical approach described by Imambekov et al. yields good agreement with our experimental results and shows that density correlations can be used for thermometry of quasicondensates.

cond-mat.quant-gas↗

arXiv2009

Single-particle-sensitive imaging of freely propagating ultracold atoms

We present a novel imaging system for ultracold quantum gases in expansion. After release from a confining potential, atoms fall through a sheet of resonant excitation laser light and the emitted fluorescence photons are imaged onto an amplified CCD camera using a high numerical aperture optical system. The imaging system reaches an extraordinary dynamic range, not attainable with conventional absorption imaging. We demonstrate single-atom detection for dilute atomic clouds with high efficiency where at the same time dense Bose-Einstein condensates can be imaged without saturation or distortion. The spatial resolution can reach the sampling limit as given by the 8 μm pixel size in object space. Pulsed operation of the detector allows for slice images, a first step toward a 3D tomography of the measured object. The scheme can easily be implemented for any atomic species and all optical components are situated outside the vacuum system. As a first application we perform thermometry on rubidium Bose-Einstein condensates created on an atom chip.

physics.atom-ph↗