SearcharxivSearch

arXiv subjects

T. Smith

Publications and source records attributed to T. Smith.

12 recordsLinked to original sources

Data Preservation in High Energy Physics

Data preservation is a mandatory specification for any present and future experimental facility and it is a cost-effective way of doing fundamental research by exploiting unique data sets in the light of the continuously increasing theoretical understanding. This document summarizes the status of data preservation in high energy physics. The paradigms and the methodological advances are discussed from a perspective of more than ten years of experience with a structured effort at international level. The status and the scientific return related to the preservation of data accumulated at large collider experiments are presented, together with an account of ongoing efforts to ensure long-term analysis capabilities for ongoing and future experiments. Transverse projects aimed at generic solutions, most of which are specifically inspired by open science and FAIR principles, are presented as well. A prospective and an action plan are also indicated.

hep-ex

Measurement of the Vector and Tensor Asymmetries at Large Missing Momentum in Quasielastic $(\vec{e}, e^{\prime}p)$ Electron Scattering from Deuterium

We report the measurement of the beam-vector and tensor asymmetries $A^V_{ed}$ and $A^T_d$ in quasielastic $(\vec{e}, e^{\prime}p)$ electrodisintegration of the deuteron at the MIT-Bates Linear Accelerator Center up to missing momentum of 500~MeV/c. Data were collected simultaneously over a momentum transfer range $0.1< Q^2<0.5$~(GeV/c)$^2$ with the Bates Large Acceptance Spectrometer Toroid using an internal deuterium gas target, polarized sequentially in both vector and tensor states. The data are compared with calculations. The beam-vector asymmetry $A^V_{ed}$ is found to be directly sensitive to the $D$-wave component of the deuteron and have a zero-crossing at a missing momentum of about 320~MeV/c, as predicted. The tensor asymmetry $A^T_d$ at large missing momentum is found to be dominated by the influence of the tensor force in the neutron-proton final-state interaction. The new data provide a strong constraint on theoretical models.

nucl-ex

Cavity beam position monitor system for the Accelerator Test Facility 2

The Accelerator Test Facility 2 (ATF2) is a scaled demonstrator system for final focus beam lines of linear high energy colliders. This paper describes the high resolution cavity beam position monitor (BPM) system, which is a part of the ATF2 diagnostics. Two types of cavity BPMs are used, C-band operating at 6.423 GHz, and S-band at 2.888 GHz with an increased beam aperture. The cavities, electronics, and digital processing are described. The resolution of the C-band system with attenuators was determined to be approximately 250 nm and 1 m for the S-band system. Without attenuation the best recorded C-band cavity resolution was 27 nm.

physics.acc-ph

The Qweak Experiment: A Search for New Physics at the TeV Scale via a Measurement of the Proton's Weak Charge

We propose a new precision measurement of parity-violating electron scattering on the proton at very low Q^2 and forward angles to challenge predictions of the Standard Model and search for new physics. A unique opportunity exists to carry out the first precision measurement of the proton's weak charge, $Q_W =1 - 4\sin^2θ_W$. A 2200 hour measurement of the parity violating asymmetry in elastic ep scattering at Q^2=0.03 (GeV/c)^2 employing 180 $μ$A of 85% polarized beam on a 35 cm liquid Hydrogen target will determine the proton's weak charge with approximately 4% combined statistical and systematic errors. The Standard Model makes a firm prediction of $Q_W$, based on the running of the weak mixing angle from the Z0 pole down to low energies, corresponding to a 10 sigma effect in this experiment.

physics.ins-det

The Cosmic Origins Spectrograph: On-Orbit Instrument Performance

The Cosmic Origins Spectrograph (COS) was installed in the Hubble Space Telescope in May, 2009 as part of Servicing Mission 4 to provide high sensitivity, medium and low resolution spectroscopy at far- and near-ultraviolet wavelengths (FUV, NUV). COS is the most sensitive FUV/NUV spectrograph flown to date, spanning the wavelength range from 900{\AA} to 3200{\AA} with peak effective area approaching 3000 cm^2. This paper describes instrument design, the results of the Servicing Mission Orbital Verification (SMOV), and the ongoing performance monitoring program.

astro-ph.IM

The Role of Mesons in the Electromagnetic Form Factors of the Nucleon

The roles played by mesons in the electromagnetic form factors of the nucleon are explored using as a basis a model containing vector mesons with coupling to the continuum together with the asymptotic $Q^2$ behavior of perturbative QCD. Specifically, the vector dominance model (GKex) developed by Lomon is employed, as it is known to be very successful in representing the existing high-quality data published to date. An analysis is made of the experimental uncertainties present when the differences between the GKex model and the data are expanded in orthonormal basis functions. A main motivation for the present study is to provide insight into how the various ingredients in this model yield the measured behavior, including discussions of when dipole form factors are to be expected or not, of which mesons are the major contributors, for instance, at low-$Q^2$ or large distances, and of what effects are predicted from coupling to the continuum. Such insights are first discussed in momentum space, followed by an analysis of how different and potentially useful information emerges when both the experimental and theoretical electric form factors are Fourier transformed to coordinate space. While these Fourier transforms should not be interpreted as "charge distributions", nevertheless the roles played by the various mesons, especially which are dominant at large or small distance scales, can be explored via such experiment--theory comparisons.

nucl-th

The Charge Form Factor of the Neutron at Low Momentum Transfer from the $^{2}\vec{\rm H}(\vec{\rm e},{\rm e}'{\rm n}){\rm p}$ Reaction

We report new measurements of the neutron charge form factor at low momentum transfer using quasielastic electrodisintegration of the deuteron. Longitudinally polarized electrons at an energy of 850 MeV were scattered from an isotopically pure, highly polarized deuterium gas target. The scattered electrons and coincident neutrons were measured by the Bates Large Acceptance Spectrometer Toroid (BLAST) detector. The neutron form factor ratio $G^{n}_{E}/G^{n}_{M}$ was extracted from the beam-target vector asymmetry $A_{ed}^{V}$ at four-momentum transfers $Q^{2}=0.14$, 0.20, 0.29 and 0.42 (GeV/c)$^{2}$.

nucl-ex

Measurement of the proton electric to magnetic form factor ratio from \vec ^1H(\vec e, e'p)

We report the first precision measurement of the proton electric to magnetic form factor ratio from spin-dependent elastic scattering of longitudinally polarized electrons from a polarized hydrogen internal gas target. The measurement was performed at the MIT-Bates South Hall Ring over a range of four-momentum transfer squared $Q^2$ from 0.15 to 0.65 (GeV/c)$^2$. Significantly improved results on the proton electric and magnetic form factors are obtained in combination with previous cross-section data on elastic electron-proton scattering in the same $Q^2$ region.

nucl-ex

Processing Studies of X-Band Accelerator Structures at the NLCTA

RF processing studies of 1.8-m X-band (11.4 GHz) traveling wave structures at the Next Linear Collider Test Accelerator (NLCTA) have revealed breakdown-related damage at gradients lower than expected from earlier tests with standing wave and shorter, lower group velocity traveling wave structures. To understand this difference, a series of structures with different group velocities and lengths are being processed. In parallel, efforts are being made to improve processing procedures and to reduce structure contaminants and absorbed gases. This paper presents results from these studies.

physics.acc-ph

Design, fabrication and measurement of the first rounded damped detuned accelerator structure (RDDS1)

As a joint effort in the JLC/NLC research program, we have developed a new type of damped detuned accelerator structure with optimized round-shaped cavities (RDDS). This paper discusses some important R&D aspects of the first structure in this series (RDDS1). The design aspects covered are the cell design with sub-MHz precision, HOM detuning, coupling and damping technique and wakefield simulation. The fabrication issues covered are ultra-precision cell machining with micron accuracy, assembly and diffusion bonding technologies to satisfactorily meet bookshelf, straightness and cell rotational alignment requirements. The measurements described are the RF properties of single cavities and complete accelerator section, as well as wakefields from the ASSET tests at SLAC. Finally, future improvements are also discussed.

physics.acc-ph

RF Processing of X-band Accelerator Structures at the NLCTA

During the initial phase of operation, the linacs of the Next Linear Collider (NLC) will contain roughly 5000 X-Band accelerator structures that will accelerate beams of electrons and positrons to 250 GeV. These structures will nominally operate at an unloaded gradient of 72 MV/m. As part of the NLC R&D program, several prototype structures have been built and operated at the Next Linear Collider Test Accelerator (NLCTA) at SLAC. Here, the effect of high gradient operation on the structure performance has been studied. Significant progress was made during the past year after the NLCTA power sources were upgraded to reliably produce the required NLC power levels and beyond. This paper describes the structures, the processing methodology and the observed effects of high gradient operation.

physics.acc-ph

Testing and Implementation Progress on the Advanced Photon Source (APS) Linear Accelerator (Linac) High-Power S-band Switching System

An S-band linear accelerator is the source of particles and the front end of the Advanced Photon Source injector. In addition, it supports a low-energy undulator test line (LEUTL) and drives a free-electron laser (FEL). A waveguide-switching and distribution system is now under construction. The system configuration was revised to be consistent with the recent change to electron-only operation. There are now six modulator-klystron subsystems, two of which are being configured to act as hot spares for two S-band transmitters each, so that no single failure will prevent injector operation. The two subsystems are also used to support additional LEUTL capabilities and off-line testing. Design considerations for the waveguide-switching subsystem, topology selection, control and protection provisions, high-power test results, and current status are described

physics.acc-ph