arXiv subjects

T. Zac Ward

Publications and source records attributed to T. Zac Ward.

At least 19 recordsLinked to original sources

arXiv2026

Intrinsic Even-Odd Thickness-Driven Anomalous Hall in Epitaxial MnBi2Te4 Thin Films

We demonstrate precise control of magnetism in MnBi2Te4 thin films through careful synthesis by molecular beam epitaxy, achieving minimal defects and accurate layer thickness control. By optimizing Mn-Bi-Te ratios and growth temperatures, we minimize detrimental self-doping effects and accurately target integer-layer films. X-ray diffraction and reflectivity provide quantitative measures of film quality and thickness. When these macroscale probes of structure and thickness are integrated with magnetotransport measurements, a striking even-odd layer dependence of the anomalous Hall effect is revealed. Odd-layer films exhibit a large hysteresis up to the Néel temperature (~25K), consistent with non-compensated antiferromagnetism, while even-layer films show minimal response, as expected for an antiferromagnet. The sign of the anomalous Hall effect exhibits a sign reversal for intrinsic magnetism versus magnetism associated with defects. This work identifies critical factors for inducing pure, non-compensated ferromagnetism and reveals the character of the intrinsic anomalous Hall effect in MnBi2Te4, which together is a step towards realizing the zero-field quantum anomalous Hall effect in topological materials.

cond-mat.mtrl-sci↗

arXiv2026

Active Learning for Tractable and Reproducible Pulsed Laser Deposition

This paper shows how data-driven machine learning approaches can improve growth control, reproducibility, and physical insight in the pulsed laser deposition (PLD) growth of correlated oxides. Despite well-known relationships between growth conditions and material properties, consistently producing high-quality films of complex materials like LaVO$_3$ remains difficult due to the highly non-equilibrium nature of PLD and the defects and competing phases that accumulate during growth. Here, we use an active learning framework based on Gaussian process Bayesian optimization that incorporates measured bulk and surface lattice properties along with impurity phase information to efficiently map the multidimensional growth space of LaVO$_3$ by PLD. By tuning the relative weighting of these properties, the model identifies an optimized region where phase-pure films of LaVO$_3$ exhibit two-dimensional surfaces, near-ideal lattice parameters, and minimal sub-band gap optical absorption. The trained model reveals clear competition among different defect formation mechanisms that are connected to unseen parameters like supersaturation and surface mobility, thus giving insight into the highly non-equilibrium process of PLD growth. Together, this demonstrates that property-guided machine learning can accelerate materials optimization while providing a new way to address fundamental growth mechanisms in PLD that enable understanding and utilization of quantum phenomena found in complex oxides.

cond-mat.mtrl-sci↗

arXiv2026

Strain patterning of flexomagnetism

Flexomagnetism, the coupling of magnetic ordering to strain gradients, provides access to novel symmetry-broken magnetic phases that cannot be accessed via uniform strain. However, flexomagnetism is hard to understand because it is extremely difficult to control a spatially varying strain. Here, we develop a top-down strategy to pattern transverse strain gradients using helium ion implantation through a lithographically defined mask. Using epitaxial films of the antiferromagnetic nodal line semimetal GdAuGe, we demonstrate that transverse strain gradients $\partial \varepsilon_{zz}/\partial x$ induce near-room-temperature ferromagnetic response, compared to the retained para or antiferromagnetism for homogeneously strained GdAuGe. We spatially correlate the magnetic response with the regions of largest strain gradient, via magnetic force microscopy and nanobeam x-ray diffraction, respectively, to confirm the flexomagnetic response. Our approach opens new avenues for the precise control of magnetic phases in thin films of quantum materials via a patterned strain gradient.

cond-mat.mtrl-sci↗

arXiv2026

Nucleation and Antiphase Twin Control in Bi$_2$Se$_3$ via Step-Terminated Al$_2$O$_3$ Substrates

The epitaxial synthesis of high-quality 2D layered materials is an essential driver of both fundamental physics studies and technological applications. Bi$_2$Se$_3$, a prototypical 2D layered topological insulator, is sensitive to defects imparted during the growth, either thermodynamically or due to the film-substrate interaction. In this study, it is shown that step-terminated Al$_2$O$_3$ substrates with a high miscut angle (3°) can effectively suppress a particular hard-to-mitigate defect, the antiphase twin. Systematic investigations across a range of growth temperatures and substrate miscut angles confirm that atomic step edges act as preferential nucleation sites, stabilizing a single twin domain. First-principles calculations suggest that there is a significant energy barrier for twin boundary formation at step edges, supporting the experimental observations. Detailed structural characterization indicates that this twin-selectivity is lost through the mechanism of the 2D layers overgrowing the step edges, leading to higher twin density as the thickness increases. These findings highlight the complex energy landscape unique to 2D materials that is driven by the interplay between substrate properties, nucleation dynamics, and defect formation, and overcoming and controlling these are critical to improve material quality for quantum and electronic applications.

cond-mat.mtrl-sci↗

arXiv2025

Programmable phase selection between altermagnetic and non-centrosymmetric polymorphs of MnTe on InP via molecular beam epitaxy

Phase selecting nearly degenerate crystalline polymorphs during epitaxial growth can be challenging yet is critical to targeting physical properties for specific applications. Here, we establish how phase selectivity of altermagnetic and non-centrosymmetric polymorphs of MnTe with high structural quality and phase purity can be programmed by subtle changes to the surface of lattice-matched InP substrates in molecular beam epitaxial (MBE) growth. Bulk altermagnetic MnTe is thermodynamically stable in the hexagonal NiAs-structure and is synthesized here on the (111)A surface (In-terminated) of InP, while the non-centrosymmetric, cubic ZnS-structure with wide band gap (> 3eV) is stabilized on the (111)B surface (P-terminated). Here we use electron microscopy, photoemission spectroscopy, and reflection high-energy electron diffraction, which together indicate that the phase selection is triggered at the interface and proceeds along the growing surface. First principles calculations suggest that interfacial termination and strain have a significant effect on the interfacial energy; stabilizing the NiAs polymorph on the In-terminated surface and the ZnS structure on the P-terminated surface. Selectively grown, high-quality films of MnTe polymorphs are key platforms that will enable our understanding of the novel properties of these materials, thereby facilitating their use in new applications ranging from spintronics to microelectronic devices.

cond-mat.mtrl-sci↗

arXiv2024

Stoichiometry-induced ferromagnetism in altermagnetic candidate MnTe

The field of spintronics has seen a surge of interest in altermagnetism due to novel predictions and many possible applications. MnTe is a leading altermagnetic candidate that is of significant interest across spintronics due to its layered antiferromagnetic structure, high Neel temperature (TN ~ 310 K) and semiconducting properties. We present results on molecular beam epitaxy (MBE) grown MnTe/InP(111) films. Here, it is found that the electronic and magnetic properties are driven by the natural stoichiometry of MnTe. Electronic transport and in situ angle-resolved photoemission spectroscopy show the films are natively metallic with the Fermi level in the valence band and the band structure is in good agreement with first principles calculations for altermagnetic spin-splitting. Neutron diffraction confirms that the film is antiferromagnetic with planar anisotropy and polarized neutron reflectometry indicates weak ferromagnetism, which is linked to a slight Mn-richness that is intrinsic to the MBE grown samples. When combined with the anomalous Hall effect, this work shows that the electronic response is strongly affected by the ferromagnetic moment. Altogether, this highlights potential mechanisms for controlling altermagnetic ordering for diverse spintronic applications.

cond-mat.mtrl-sci↗

arXiv2024

Interfacially enhanced superconductivity in Fe(Te,Se)/Bi4Te3 heterostructures

Realizing topological superconductivity by integrating high-transition-temperature ($T_C$) superconductors with topological insulators can open new paths for quantum computing applications. Here, we report a new approach for increasing the superconducting transition temperature ($T_{C}^{onset}$) by interfacing the unconventional superconductor Fe(Te,Se) with the topological insulator Bi-Te system in the low-Se doping regime, near where superconductivity vanishes in the bulk. The critical finding is that the $T_{C}^{onset}$ of Fe(Te,Se) increases from nominally non-superconducting to as high as 12.5 K when $Bi_2Te_3$ is replaced with the topological phase $Bi_4Te_3$. Interfacing Fe(Te,Se) with $Bi_4Te_3$ is also found to be critical for stabilizing superconductivity in monolayer films where $T_{C}^{onset}$ can be as high as 6 K. Measurements of the electronic and crystalline structure of the $Bi_4Te_3$ layer reveal that a large electron transfer, epitaxial strain, and novel chemical reduction processes are critical factors for the enhancement of superconductivity. This novel route for enhancing $T_C$ in an important epitaxial system provides new insight on the nature of interfacial superconductivity and a platform to identify and utilize new electronic phases.

cond-mat.supr-con↗

arXiv2023

Emergent magnetism with continuous control in the ultrahigh conductivity layered oxide PdCoO2

The current challenge to realizing continuously tunable magnetism lies in our inability to systematically change properties such as valence, spin, and orbital degrees of freedom as well as crystallographic geometry. Here, we demonstrate that ferromagnetism can be externally turned on with the application of low-energy helium implantation and subsequently erased and returned to the pristine state via annealing. This high level of continuous control is made possible by targeting magnetic metastability in the ultra-high conductivity, non-magnetic layered oxide PdCoO2 where local lattice distortions generated by helium implantation induce emergence of a net moment on the surrounding transition metal octahedral sites. These highly-localized moments communicate through the itinerant metal states which triggers the onset of percolated long-range ferromagnetism. The ability to continuously tune competing interactions enables tailoring precise magnetic and magnetotransport responses in an ultra-high conductivity film and will be critical to applications across spintronics.

cond-mat.mtrl-sci↗

arXiv2022

Surface-Driven Evolution of the Anomalous Hall Effect in Magnetic Topological Insulator MnBi2Te4 Thin Films

Understanding the effects of interfacial modification to the functional properties of magnetic topological insulator thin films is crucial for developing novel technological applications from spintronics to quantum computing. Here, we report that a large electronic and magnetic response is induced in the intrinsic magnetic topological insulator MnBi2Te4 by controlling the propagation of surface oxidation. We show that the formation of the surface oxide layer is confined to the top 1-2 unit cells but drives large changes in the overall magnetic response. Specifically, we observe a dramatic reversal of the sign of the anomalous Hall effect driven by finite thickness magnetism, which indicates that the film splits into distinct magnetic layers each with a unique electronic signature. These data reveal a delicate dependence of the overall magnetic and electronic response of MnBi2Te4 on the stoichiometry of the top layers. Our study suggests that perturbations resulting from surface oxidation may play a non-trivial role in the stabilization of the quantum anomalous Hall effect in this system and that understanding targeted modifications to the surface may open new routes for engineering novel topological and magnetic responses in this fascinating material.

cond-mat.mtrl-sci↗

arXiv2021

Self-regulated growth of candidate topological superconducting parkerite by molecular beam epitaxy

Ternary chalcogenides such as the parkerites and shandites are a broad class of materials exhibiting rich diversity of transport and magnetic behavior as well as an array of topological phases including Weyl and Dirac nodes. However, they remain largely unexplored as high-quality epitaxial thin films. Here, we report the self-regulated growth of thin films of the strong spin-orbit coupled superconductor Pd3Bi2Se2 on SrTiO3 by molecular beam epitaxy. Films are found to grow in a self-regulated fashion, where, in excess Se, the temperature and relative flux ratio of Pd to Bi controls the formation of Pd3Bi2Se2 due to the combined volatility of Bi, Se, and Bi-Se bonded phases. The resulting films are shown to be of high structural quality, the stoichiometry is independent of the Pd:Bi and Se flux ratio and exhibit a superconducting transition temperature of 800 mK and critical field of 17.7 +/- 0.5 mT, as probed by transport as well as magnetometry. Understanding and navigating the growth of the chemically and structurally diverse classes of ternary chalcogenides opens a vast space for discovering new phenomena as well as enabling new applications.

cond-mat.mtrl-sci↗

arXiv2021

Design and realization of Ohmic and Schottky interfaces for oxide electronics

Understanding band alignment and charge transfer at complex oxide interfaces is critical to tailoring and utilizing their diverse functionality. Towards this goal, we design and experimentally validate both Ohmic- and Schottky-like charge transfers at oxide/oxide semiconductor/metal interfaces. We utilize a method for predicting band alignment and charge transfer in ABO3 perovskites, where previously established rules for simple semiconductors fail. The prototypical systems chosen are the rare class of oxide metals, SrBO3 with B=V-Ta, when interfaced with the multifaceted semiconducting oxide, SrTiO3. For B=Nb and Ta, we confirm that a large accumulation of charge occurs in SrTiO3 due to higher energy Nb and Ta d-states relative to Ti; this gives rise to a high mobility metallic interface, which is an ideal epitaxial oxide/oxide Ohmic contact. On the other hand, for B=V, there is no charge transfer into the SrTiO3 interface, which serves as a highly conductive epitaxial gate metal. Going beyond these specific cases, this work opens the door to integrating the vast phenomena of ABO3 perovskites into a wide range of practical devices.

cond-mat.mtrl-sci↗

arXiv2021

High Entropy Oxide Relaxor Ferroelectrics

Relaxor ferrolectrics are important in technological applications due to a strong electromechanical response, energy storage capacity, electrocaloric effect, and pyroelectric energy conversion properties. Current efforts to discover and design new materials in this class generally rely on substitutional doping of known ferroelectrics, as slight changes to local compositional order can significantly affect the Curie temperature, morphotropic phase boundary, and electromechanical responses. In this work, we demonstrate that moving to the strong limit of compositional complexity in an ABO3 perovskite allows stabilization of novel relaxor responses that do not rely on a single narrow phase transition region. Entropy-assisted synthesis approaches are used to create single crystal Ba(Ti0.2Sn0.2Zr0.2Hf0.2Nb0.2)O3 [Ba(5B)O] films. The high levels of configurational disorder present in this system is found to influence dielectric relaxation, phase transitions, nano-polar domain formation, and Curie temperature. Temperature-dependent dielectric, Raman spectroscopy and second-harmonic generation measurements reveal multiple phase transitions, a high Curie temperature of 570 K, and the relaxor ferroelectric nature of Ba(5B)O films. The first principles theory calculations are used to predict possible combinations of cations to quantify the relative feasibility of formation of highly disordered single-phase perovskite systems. The ability to stabilize single-phase perovskites with such a large number of different cations on the B-sites offers new possibilities for designing high-performance materials for piezoelectric, pyroelectric and tunable dielectric applications.

cond-mat.mtrl-sci↗

arXiv2020

Adsorption-controlled growth of MnTe(Bi2Te3)n by molecular beam epitaxy exhibiting stoichiometry-controlled magnetism

We report the growth of the intrinsic magnetic topological system MnTe(Bi2Te3)n by molecular beam epitaxy. By mapping the temperature and the Bi:Mn flux ratio, it is shown that there is a narrow growth window for the n=1 phase MnBi2Te4 with 2.0 4.5) it is found that the n = 2 MnBi4Te7 phase is stabilized. Transport measurements indicate that the MnBi2Te4 and MnBi4Te7 undergo magnetic transitions around 25 K, and 10 K, respectively, consistent with antiferromagnetic phases found in the bulk. Further, for Mn-rich conditions (Bi:Mn<2), ferromagnetism emerges that exhibits a clear hysteretic state in the Hall effect, which likely indicates Mn-doped MnBi2Te4. Understanding how to grow ternary chalcogenide phases is the key to synthesizing new materials and to interface magnetism and topology, which together are routes to realize and control exotic quantum phenomena.

cond-mat.mtrl-sci↗

arXiv2020

Unexpected crystalline homogeneity from the disordered bond network in La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 films

Designing and understanding functional electronic and magnetic properties in perovskite oxides requires controlling and tuning the underlying crystal lattice. Here we report the structure, including oxygen and cation positions, of a single-crystal, entropy stabilized perovskite oxide film of La(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3 grown on SrTiO3 (001). The parent materials range from orthorhombic (LaCrO3, LaMnO3 and LaFeO3) to rhombohedral (LaCoO3 and LaNiO3), and first principles calculations indicate that these structural motifs are nearly degenerate in energy and should be highly distorted site-to-site. Despite this extraordinary local configurational disorder on the B-site sublattice, we find a structure with unexpected macroscopic crystalline homogeneity with a clear orthorhombic unit cell, whose orientation is demonstrated to be controlled by the strain and crystal structure of the substrate for films grown on (La0.3Sr0.7)(Al0.65Ta0.35)O3 (LSAT) and NdGaO3 (110). Furthermore, quantification of the atom positions within the unit cell reveal that the orthorhombic distortions are small, close to LaCrO3, which may be driven by a combination of disorder averaging and the average ionic radii. This is the first step towards understanding the rules for designing new crystal motifs and tuning functional properties through controlled configurational complexity.

cond-mat.mtrl-sci↗

arXiv2019

Growth of metallic delafossite PdCoO2 by molecular beam epitaxy

The Pd, and Pt based ABO2 delafossites are a unique class of layered, triangular oxides with 2D electronic structure and a large conductivity that rivals the noble metals. Here, we report successful growth of the metallic delafossite PdCoO2 by molecular beam epitaxy (MBE). The key challenge is controlling the oxidation of Pd in the MBE environment where phase-segregation is driven by the reduction of PdCoO2 to cobalt oxide and metallic palladium. This is overcome by combining low temperature (300 °C) atomic layer-by-layer MBE growth in the presence of reactive atomic oxygen with a post-growth high-temperature anneal. Thickness dependence (5-265 nm) reveals that in the thin regime (<75 nm), the resistivity scales inversely with thickness, likely dominated by surface scattering; for thicker films the resistivity approaches the values reported for the best bulk-crystals at room temperature, but the low temperature resistivity is limited by structural twins. This work shows that the combination of MBE growth and a post-growth anneal provides a route to creating high quality films in this interesting family of layered, triangular oxides.

cond-mat.mtrl-sci↗

arXiv2019

Exploiting symmetry-mismatch to control magnetism in a ferroelastic heterostructure

In the bulk, LaCoO3 (LCO) is a paramagnet, yet in tensile strained thin films at low temperature ferromagnetism (FM) is observed, and its origin remains unresolved. Polarized neutron reflectometry (PNR) is a powerful tool to determine the depth profiles of the structure and magnetization simultaneously and thus the evolution of the interfacial FM with strain can be accurately revealed. Here we quantitatively measured the distribution of atomic density and magnetization in LCO films by PNR and found that the LCO layers near the heterointerfaces exhibit a reduced magnetization but an enhanced atomic density, whereas the interior shows the opposite trend. We attribute the nonuniformity to the symmetry mismatch at the interface, which induces a structural distortion related to the ferroelasticity of LCO. This assertion is tested by systematic application of hydrostatic pressure during the PNR experiments. These results provide unique insights into mechanisms driving FM in strained LCO films while offering a tantalizing observation that tunable deformation of the CoO6 octahedra in combination with the ferroelastic order parameter.

cond-mat.mtrl-sci↗

arXiv2019

Nanoscale ferroelastic twins formed in strained LaCoO3 films

The coexistence and coupling of ferroelasticity and magnetic ordering in a single material offers a great opportunity to realize novel devices with multiple tuning knobs. Complex oxides are a particularly promising class of materials to find multiferroic interactions as they often possess rich phase diagrams and the interactions are very sensitive to external perturbations. Still, there are very few examples of these systems. Here we report the observation of twinning domains in ferroelastic LaCoO3 epitaxial thin films and their geometric control of structural symmetry that are intimately linked to the material electronic and magnetic states. A unidirectional structural modulation is achieved by selective choice of substrates possessing two-fold rotational symmetry. This modulation perturbs the crystal field splitting energy, leading to unexpected in plane anisotropy of orbital configuration and magnetization. These findings demonstrate the utilization of structural modulation to control multiferroic interactions and may enable a great potential for stimulation of exotic phenomena through artificial domain engineering.

cond-mat.mtrl-sci↗

arXiv2018

Single Crystal High Entropy Perovskite Oxide Epitaxial Films

The first examples of single crystal epitaxial thin films of a high entropy perovskite oxide are synthesized. Pulsed laser deposition is used to grow the configurationally disordered ABO3 perovskite, Ba(Zr0.2Sn0.2Ti0.2Hf0.2Nb0.2)O3, epitaxially on SrTiO3 and MgO substrates. X-ray diffraction and scanning transmission electron microscopy demonstrate that the films are single phase with excellent crystallinity and atomically abrupt interfaces to the underlying substrates. Atomically-resolved electron energy loss spectroscopy mapping shows a uniform and random distribution of all B-site cations. The ability to stabilize perovskites with this level of configurational disorder offers new possibilities for designing materials from a much broader combinatorial cation pallet while providing a fresh avenue for fundamental studies in strongly correlated quantum materials where local disorder can play a critical role in determining macroscopic properties.

cond-mat.mtrl-sci↗