Searcharxiv⌕ Search

arXiv subjects

T. Zhang

Publications and source records attributed to T. Zhang.

At least 37 records · Page 2Linked to original sources

Reliable Clutter Suppression for Slow-Moving Weak Target Radar Detection

Reliable slow-moving weak target detection in complicated environments is challenging due to the masking effects from the surrounding strong reflectors. The traditional Moving Target Indication (MTI) may suppress the echoes from not only the static interference objects (IOs), but also the desired slow-moving weak target. According to the low-rank and sparse properties of the range-velocity maps across different radar scans, a novel clutter suppression scheme based on the Go decomposition (Godec) framework is proposed in this paper. The simulation results show that with the existence of masking effects, the target detection scheme based on Godec clutter suppression can reliably detect the slow-moving weak target, compared to the traditional MTI-based scheme. Besides, the time consumption comparison is conducted, demonstrating that the proposed solution is one that sacrifices time complexity in exchange for enhanced reliability. Additionally, the tradeoffs among the number of false alarm cells, the detection probability and the iteration times for convergence have been revealed, guiding parameter settings of the proposed solution in practical applications. Experiment validation is also conducted to verify the proposed solution, providing further insight into the scenarios where the solution is most applicable.

eess.SP↗

Demonstrating the velocity response of a table-top EPR Speedmeter

The sensitivity of gravitational-wave interferometers is fundamentally limited by quantum noise, as dictated by the Heisenberg uncertainty principle, due to their continuous position measurement of the end mirrors. Speedmeter configurations, which measure mirror velocity rather than position, have been proposed as a means to suppress quantum back-action noise, but practical implementations remain at an early stage. In this work, we present a table-top realisation of the Einstein- Podolsky-Rosen (EPR) Speedmeter concept, employing an optical readout scheme based on two orthogonal polarisation modes that probe the interferometer with different effective bandwidths. Using a triangular cavity, we demonstrate that the differential optical response between the linear p- and s-polarised modes exhibits a speed-like frequency dependence: vanishing at DC and increasing linearly with signal frequency, up to the bandwidth of the slower mode. With this we show that an optical system equivalent to the EPR Speedmeter indeed performs a velocity readout of the end mirror.

astro-ph.IM↗

The calibration house in JUNO

As an auxiliary system within the calibration system of the Jiangmen Underground Neutrino Observatory, a calibration house is designed to provide interfaces for connecting the central detector and accommodating various calibration sub-systems. Onsite installation has demonstrated that the calibration house interfaces are capable of effectively connecting to the central detector and supporting the installation of complex and sophisticated calibration sub-systems. Additionally, controlling the levels of radon and oxygen within the calibration house is critical. Radon can increase the experimental background, while oxygen can degrade the quality of the liquid scintillator. The oxygen concentration can be maintained at levels below 10 parts per million, and the radon concentration can be kept below 15 mBq/m$^{3}$. This paper will provide detailed information on the calibration house and its methods for radon and oxygen concentration control.

physics.ins-det↗

scikit-package -- software packaging standards and roadmap for sharing reproducible scientific software

Scientific advancement relies on the ability to share and reproduce results. When data analysis or calculations are carried out using software written by scientists there are special challenges around code versions, quality and code sharing. scikit-package provides a roadmap to facilitate code reuse and sharing with minimal effort through tutorials coupled with automated and centralized reusable workflows. The goal of the project is to provide pedagogical and practical tools for scientists who are not professionally trained software engineers to write more reusable and maintainable software code. Code reuse can occur at multiple levels of complexity-from turning a code block into a function within a single script, to publishing a publicly installable, fully tested, and documented software package scikit-package provides a community maintained set of tools, and a roadmap, to help scientists bring their software higher levels of reproducibility and shareability.

cs.SE↗

Lensing Without Borders: Measurements of galaxy-galaxy lensing and projected galaxy clustering in DESI DR1

We present Galaxy-Galaxy Lensing measurements obtained by cross-correlating spectroscopically observed galaxies from the first data release of the Dark Energy Spectroscopic Instrument (DESI) with source galaxies from the Hyper Suprime-Cam Subaru Strategic Survey, the Kilo-Degree Survey, the Sloan Digital Sky Survey, and the Dark Energy Survey. Specifically, we measure the excess surface mass density $ΔΣ$ and tangential shear $γ_\mathrm{t}$ for the Bright Galaxy Sample and Luminous Red Galaxies measured within the first year of observations with DESI. To ensure robustness, we test the measurements for systematic biases, finding no significant trends related to the properties of the \acrshort{desi} lens galaxies. We identify a significant trend with the average redshift of source galaxies, however, this trend vanishes once we apply shifts to the Hyper Suprime-Cam Subaru Strategic Survey redshift distributions that are also favored by their fiducial cosmology analysis. Additionally, we compare the observed scatter in the measurements with the theoretical covariance and find excess scatter, driven primarily by small-scale measurements of $r\leq 1 \, \mathrm{Mpc}/h$; measurements on larger scales are consistent at the $2\,σ$ level. We further present the projected clustering measurements $w_p$ of the galaxy samples in the the first data release of DESI. These measurements, which will be made publicly available, serve as a foundation for forthcoming cosmological analyses.

astro-ph.CO↗

HydroX, a light dark matter search with hydrogen-doped liquid xenon time projection chambers

Experimental efforts searching for dark matter particles over the last few decades have ruled out many candidates led by the new generation of tonne-scale liquid xenon. For light dark matter, hydrogen could be a better target than xenon as it would offer a better kinematic match to the low mass particles. This article describes the HydroX concept, an idea to expand the dark matter sensitivity reach of large liquid xenon detectors by adding hydrogen to the liquid xenon. We discuss the nature of signal generation in liquid xenon to argue that the signal produced at the interaction site by a dark matter-hydrogen interaction could be significantly enhanced over the same interaction on xenon, increasing the sensitivity to the lightest particles. We discuss the technical implications of adding hydrogen to a xenon detector, as well as some background considerations. Finally, we make projections as to the potential sensitivity of a HydroX implementation and discuss next steps.

hep-ex↗

ALMAGAL IV. Morphological comparison of molecular and thermal dust emission using the histogram of oriented gradients (HOG) method

The study of molecular line emission is crucial to unveil the kinematics and the physical conditions of gas in star-forming regions. Our aim is to quantify the reliability of using individual molecular transitions to derive physical properties of the bulk of the H2 gas, looking at morphological correlations in their overall integrated molecular line emission with the cold dust. For this study we selected transitions of H2CO, CH$_3$OH, DCN, HC$_3$N, CH$_3$CN, CH$_3$OCHO, SO, and SiO and compared them with the 1.38 mm dust continuum emission at different spatial scales in the ALMAGAL sample, that observed a total of 1013 targets covering all evolutionary stages of the high-mass star-formation process and different conditions of clump fragmentation. We used the method of the histogram of oriented gradients (HOG) implemented in the tool astroHOG to compare the morphology of integrated line emission with maps of the 1.38 mm dust continuum emission. Moreover, we calculated the Spearman's correlation coefficient, and compared it with our astroHOG results. Only H$_2$CO, CH$_3$OH, and SO show emission on spatial scales comparable with the diffuse continuum emission. However, from the HOG method, the median correlation of the emission of each of these species with the continuum is only $\sim$24-29%. In comparison with the dense fragments these molecular species still have low values of correlation. On the other hand DCN, HC$_3$N, CH$_3$CN, and CH$_3$OCHO show a good correlation with the dense dust fragments, above 60%. The worst correlation is seen with SiO, both with the extended continuum emission and with compact sources. From the comparison of the results of the HOG method and the Spearman's correlation coefficient, the HOG method gives much more reliable results than the intensity-based coefficient in estimating the level of similarity of the emission morphology.

astro-ph.GA↗

ALMAGAL I. The ALMA evolutionary study of high-mass protocluster formation in the Galaxy. Presentation of the survey and early results

Fundamental questions about the physics responsible for fragmenting molecular parsec-scale clumps into cores of ~1000 au are still open, that only a statistically significant investigation with ALMA is able to address: what are the dominant agents that determine the core demographics, mass, and spatial distribution as a function of the physical properties of the hosting clumps, their evolutionary stage and the different Galactic environments in which they reside? To what extent extent is fragmentation driven by clumps dynamics or mass transport in filaments? With ALMAGAL we observed the 1.38 mm continuum and lines toward more than 1000 dense clumps in our Galaxy, with M>500M_sun, surface density > 0.1 g/cm2 and d<7.5 kpc. The ACA and two 12-m array setups were used to deliver a minimum resolution of ~1000 au over the entire sample distance range. The sample covers all evolutionary stages from infrared dark clouds (IRDCs) to HII regions from the tip of the Galactic bar to the outskirts of the Galaxy. The spectral setup includes several molecular lines to trace the multiscale physics and dynamics of gas, notably CH3CN, H2CO, SiO, CH3OH, DCN, HC3N, SO etc. We present an initial overview of the observations and the early science product and results, with a first characterization of the morphological properties of the continuum emission. We use "perimeter-versus-area" and convex hull-versus-area metrics to classify the different morphologies. More extended and morphologically complex shapes are found toward clumps that are relatively more evolved and have higher surface densities.

astro-ph.GA↗

ALMAGAL II. The ALMA evolutionary study of high-mass protocluster formation in the Galaxy. ALMA data processing and pipeline

The ALMAGAL Large Program has observed 1017 high-mass star-forming regions distributed throughout the Galaxy, sampling different evolutionary stages and environmental conditions. In this work, we present the acquisition and processing of the ALMAGAL data. The main goal is to set up a robust pipeline that generates science-ready products, with a good and uniform quality across the whole sample. ALMAGAL observations were performed with the Atacama Large Millimeter/submillimeter Array (ALMA). Each field was observed in three different telescope arrays, being sensitive to spatial scales ranging from 1000 au up to 0.1 pc. The spectral setup allows sensitive imaging of the continuum emission at 219 GHz, and it covers multiple molecular spectral lines observed in four different spectral windows that span about 4 GHz in frequency coverage. We have designed a Python-based processing workflow to calibrate and image these observational data. This ALMAGAL pipeline includes an improved continuum determination, suited for line-rich sources; an automatic self-calibration process that improves the dynamical range of the final images; and the combination of data from different telescope arrays to produce science-ready, fully combined images. The fully combined products have spatial resolutions in the range 800-2000 au, and mass sensitivities in the range 0.02-0.07 Mo. We also present a first analysis of the spectral line information included in the ALMAGAL setup, and its potential for future scientific studies. As an example, specific spectral lines at 1000 au scales resolve the presence of multiple outflows in clusters and will help us to search for disk candidates around massive protostars. Moreover, the broad frequency bands provide information on the chemical richness of the different cluster members, which can be used to study the chemical evolution during the formation process of star clusters.

astro-ph.GA↗

OpenUniverse2024: A shared, simulated view of the sky for the next generation of cosmological surveys

The OpenUniverse2024 simulation suite is a cross-collaboration effort to produce matched simulated imaging for multiple surveys as they would observe a common simulated sky. Both the simulated data and associated tools used to produce it are intended to uniquely enable a wide range of studies to maximize the science potential of the next generation of cosmological surveys. We have produced simulated imaging for approximately 70 deg$^2$ of the Vera C. Rubin Observatory Legacy Survey of Space and Time (LSST) Wide-Fast-Deep survey and the Nancy Grace Roman Space Telescope High-Latitude Wide-Area Survey, as well as overlapping versions of the ELAIS-S1 Deep-Drilling Field for LSST and the High-Latitude Time-Domain Survey for Roman. OpenUniverse2024 includes i) an early version of the updated extragalactic model called Diffsky, which substantially improves the realism of optical and infrared photometry of objects, compared to previous versions of these models; ii) updated transient models that extend through the wavelength range probed by Roman and Rubin; and iii) improved survey, telescope, and instrument realism based on up-to-date survey plans and known properties of the instruments. It is built on a new and updated suite of simulation tools that improves the ease of consistently simulating multiple observatories viewing the same sky. The approximately 400 TB of synthetic survey imaging and simulated universe catalogs are publicly available, and we preview some scientific uses of the simulations.

astro-ph.CO↗

Revealing the Microscopic Mechanism of Elementary Vortex Pinning in Superconductors

Vortex pinning is a crucial factor that determines the critical current of practical superconductors and enables their diverse applications. However, the underlying mechanism of vortex pinning has long been elusive, lacking a clear microscopic explanation. Here using high-resolution scanning tunneling microscopy, we studied single vortex pinning induced by point defect in layered FeSe-based superconductors. We found the defect-vortex interaction drives low-energy vortex bound states away from EF, creating a "mini" gap that effectively lowers the system energy and enhances pinning. By measuring the local density-of-states, we directly obtained the elementary pinning energy and estimated the pinning force via the spatial gradient of pinning energy. The results are consistent with bulk critical current measurement. Furthermore, we show that a general microscopic quantum model incorporating defect-vortex interaction can naturally capture our observation. It suggests that the local pairing near pinned vortex core is actually enhanced compared to unpinned vortex, which is beyond the traditional understanding that non-superconducting regions pin vortices. Our study thus unveils a general microscopic mechanism of vortex pinning in superconductors, and provides insights for enhancing the critical current of practical superconductors.

cond-mat.supr-con↗

Suppression of Edge Localized Modes in ITER Baseline Scenario in EAST using Edge Localized Magnetic Perturbations

We report the suppression of Type-I Edge Localized Modes (ELMs) in the EAST tokamak under ITER baseline conditions using $n = 4$ Resonant Magnetic Perturbations (RMPs), while maintaining energy confinement. Achieving RMP-ELM suppression requires a normalized plasma beta ($β_N$) exceeding 1.8 in a target plasma with $q_{95}\approx 3.1$ and tungsten divertors. Quasi-linear modeling shows high plasma beta enhances RMP-driven neoclassical toroidal viscosity torque, reducing field penetration thresholds. These findings demonstrate the feasibility and efficiency of high $n$ RMPs for ELM suppression in ITER.

physics.plasm-ph↗

A multi-cubic-kilometre neutrino telescope in the western Pacific Ocean

Next-generation neutrino telescopes with significantly improved sensitivity are required to pinpoint the sources of the diffuse astrophysical neutrino flux detected by IceCube and uncover the century-old puzzle of cosmic ray origins. A detector near the equator will provide a unique viewpoint of the neutrino sky, complementing IceCube and other neutrino telescopes in the Northern Hemisphere. Here we present results from an expedition to the north-eastern region of the South China Sea, in the western Pacific Ocean. A favorable neutrino telescope site was found on an abyssal plain at a depth of $\sim$ 3.5km. At depths below 3km, the sea current speed, water absorption and scattering lengths for Cherenkov light, were measured to be $v_{\mathrm{c}}<$10cm/s, $λ_{\mathrm{abs} }\simeq$ 27m and $λ_{\mathrm{sca} }\simeq$ 63m, respectively. Accounting for these measurements, we present the design and expected performance of a next-generation neutrino telescope, TRopIcal DEep-sea Neutrino Telescope (TRIDENT). With its advanced photon-detection technology and large dimensions, TRIDENT expects to observe the IceCube steady source candidate NGC 1068 with 5$σ$ significance within 1 year of operation. This level of sensitivity will open a new arena for diagnosing the origin of cosmic rays and probing fundamental physics over astronomical baselines.

astro-ph.HE↗

Deployment of Water-based Liquid Scintillator in the Accelerator Neutrino Neutron Interaction Experiment

The Accelerator Neutrino Neutron Interaction Experiment (ANNIE) is a 26-ton water Cherenkov neutrino detector installed on the Booster Neutrino Beam (BNB) at Fermilab. Its main physics goals are to perform a measurement of the neutron yield from neutrino-nucleus interactions, as well as a measurement of the charged-current cross section of muon neutrinos. An equally important focus is placed on the research and development of new detector technologies and target media. Specifically water-based liquid scintillator (WbLS) is of interest as a novel detector medium, as it allows for the simultaneous detection of scintillation and Cherenkov light. This paper presents the deployment of a 366L WbLS vessel in ANNIE in March 2023 and the subsequent detection of both Cherenkov light and scintillation from the WbLS. This proof-of-concept allows for the future development of reconstruction and particle identification algorithms in ANNIE, as well as dedicated analyses, such as the search for neutral current events and the hadronic scintillation component within the WbLS volume.

hep-ex↗

Statistical Analyses of Solar Prominences and Active Region Features in 304 Å Filtergrams detected via Deep Learning

Solar active regions (ARs) are areas on the Sun with very strong magnetic fields where various activities take place. Prominences are one of the typical solar features in the solar atmosphere, whose eruptions often lead to solar flares and coronal mass ejections (CMEs). Therefore, studying their morphological features and their relationship with solar activity is useful in predicting eruptive events and in understanding the long-term evolution of solar activities. A huge amount of data have been collected from various ground-based telescopes and satellites. The massive data make human inspection difficult. For this purpose, we developed an automated detection method for prominences and ARs above the solar limb based on deep learning techniques. We applied it to process the 304 Ådata obtained by SDO/AIA from 2010 May 13 to 2020 December 31. Besides the butterfly diagrams and latitudinal migrations of the prominences and ARs during solar cycle 24, the variations of their morphological features (such as the locations, areas, heights, and widths) with the calendar years and the latitude bands were analyzed. Most of these statistical results based on our new method are in agreement with previous studies, which also guarantees the validity of our method. The N-S asymmetry indices of the prominences and ARs show that the northern hemisphere dominates in solar cycle 24, except for 2012--2015, and 2020 for ARs. The high-latitude prominences show much stronger N-S asymmetry that the northern hemisphere is dominant in $\sim$2011 and $\sim$2015 and the southern hemisphere is dominant during 2016--2019.

astro-ph.SR↗

SEDAC: A CVAE-Based Data Augmentation Method for Security Bug Report Identification

Bug tracking systems store many bug reports, some of which are related to security. Identifying those security bug reports (SBRs) may help us predict some security-related bugs and solve security issues promptly so that the project can avoid threats and attacks. However, in the real world, the ratio of security bug reports is severely low; thus, directly training a prediction model with raw data may result in inaccurate results. Faced with the massive challenge of data imbalance, many researchers in the past have attempted to use text filtering or clustering methods to minimize the proportion of non-security bug reports (NSBRs) or apply oversampling methods to synthesize SBRs to make the dataset as balanced as possible. Nevertheless, there are still two challenges to those methods: 1) They ignore long-distance contextual information. 2) They fail to generate an utterly balanced dataset. To tackle these two challenges, we propose SEDAC, a new SBR identification method that generates similar bug report vectors to solve data imbalance problems and accurately detect security bug reports. Unlike previous studies, it first converts bug reports into individual bug report vectors with distilBERT, which are based on word2vec. Then, it trains a generative model through conditional variational auto-encoder (CVAE) to generate similar vectors with security labels, which makes the number of SBRs equal to NSBRs'. Finally, balanced data are used to train a security bug report classifier. To evaluate the effectiveness of our framework, we conduct it on 45,940 bug reports from Chromium and four Apache projects. The experimental results show that SEDAC outperforms all the baselines in g-measure with improvements of around 14.24%-50.10%.

cs.CR↗

Extension of ELM suppression window using n=4 RMPs in EAST

The q95 window for Type-I Edge Localized Modes (ELMs) suppression using n=4 even parity Resonant Magnetic Perturbations (RMPs) has been significantly expanded to a range from 3.9 to 4.8, which is demonstrated to be reliable and repeatable in EAST over the last two years. This window is significantly wider than the previous one, which is around q95=3.7pm0.1, and is achieved using n=4 odd parity RMPs. Here, n represents the toroidal mode number of the applied RMPs and q95 is the safety factor at the 95% normalized poloidal magnetic flux. During ELM suppression, there is only a slight drop in the stored energy (<=10%). The comparison of pedestal density profiles suggests that ELM suppression is achieved when the pedestal gradient is kept lower than a threshold. This wide q95 window for ELM suppression is consistent with the prediction made by MARS-F modeling prior to the experiment, in which it is located at one of the resonant q95 windows for plasma response. The Chirikov parameter taking into account plasma response near the pedestal top, which measures the plasma edge stochasticity, significantly increases when q95 exceeds 4, mainly due to denser neighboring rational surfaces. Modeling of plasma response by the MARS-F code shows a strong coupling between resonant and non-resonant components across the pedestal region, which is characteristic of the kink-peeling like response observed during RMP-ELM suppression in previous studies on EAST. These promising results show the reliability of ELM suppression using the n=4 RMPs and expand the physical understanding on ELM suppression mechanism.

physics.plasm-ph↗

Lagrangian-based methods in convex optimization: prediction-correction frameworks with ergodic convergence rates

We study the convergence rates of the classical Lagrangian-based methods and their variants for solving convex optimization problems with equality constraints. We present a generalized prediction-correction framework to establish $O(1/K^2)$ ergodic convergence rates. Under the strongly convex assumption, based on the presented prediction-correction framework, some Lagrangian-based methods with $O(1/K^2)$ ergodic convergence rates are presented, such as the augmented Lagrangian method with the indefinite proximal term, the alternating direction method of multipliers (ADMM) with a larger step size up to $(1+\sqrt{5})/2$, the linearized ADMM with the indefinite proximal term, and the multi-block ADMM type method (under an alternative assumption that the gradient of one block is Lipschitz continuous).

math.OC↗