arXiv subjects

Ta-Shun Wei

Publications and source records attributed to Ta-Shun Wei.

7 recordsLinked to original sources

arXiv2026

TIME Commissioning Observations: II. On-sky Characterization and the 2D Map Data Processing Pipeline

The Tomographic Ionized-carbon Mapping Experiment (TIME) is a line intensity mapping (LIM) instrument that is designed to observe the power spectrum of the [CII] $158$~$μ$m emission line during the Epoch of Reionization. TIME completed a commissioning run in 2022 at the Arizona Radio Observatory onboard the 12-M Radio Telescope at Kitt Peak, where it observed galactic sources for the first time. In this paper we report on an analysis of observations of the Orion Molecular Cloud (OMC) and G49.5 (a local HII region). The OMC observations were taken at least once a day to assess the stability of the instrument and demonstrate its on-sky performance. We describe a spectral image processing pipeline to make calibrated maps of raster scans of these sources, incorporating planet observations for gain calibration. We show with G49.5 that, when compared to the Bolocam Galactic Plane Survey, we are able to achieve a $< 3\%$ calibration difference. Based on the outcomes from this commissioning phase of TIME, we have demonstrated preliminary performance, and identified sources of improvement necessary for pursuing a LIM measurement.

astro-ph.IM↗

arXiv2026

Development of a planar cable-driven parallel robot for submillimeter and terahertz beam mapping measurements

The spatial sensitivity pattern of millimeter-wavelength receivers is an important diagnostic of performance and is affected by the alignment of coupling optics. Characterization can be challenging in the field, particularly in the decentered and tightly packed optical configurations that are employed for many astronomical millimeter-wave cameras. In this paper, we present the design and performance of a lightweight and reconfigurable beam mapper, consisting of a bank of thermal sources positioned by a planar cable-driven robot. We describe how the measurement requirements and mechanical constraints of the Tomographic Ionized-carbon Mapping Experiment (TIME) optical relay drive the design of the mapper. To quantify the positioning performance, we predict the beam patterns at each surface to derive requirements and use a non-contact computer-vision based method built on OpenCV to track the payload position with an accuracy better than 1.0 mm. We achieve an in-plane absolute payload position error of 2.7 mm (RMSE) over a $\sim$400 mm $\times$ 400 mm workspace and an in-plane repeatability of 0.81 mm, offering substantial improvements in accuracy and speed over traditional handheld techniques.

astro-ph.IM↗

arXiv2025

TIME Commissioning Observations: I. Mapping Dust and Molecular Gas in the Sgr A Molecular Cloud Complex at the Galactic Center

We present the processing of an observation of Sagittarius A (Sgr A) with the Tomographic Ionized-carbon Mapping Experiment (TIME), part of the 2021-2022 commissioning run to verify TIME's hyperspectral imaging capabilities for future line-intensity mapping. Using an observation of Jupiter to calibrate detector gains and pointing offsets, we process the Sgr A observation in a purpose-built pipeline that removes correlated noise through common-mode subtraction with correlation-weighted scaling, and uses map-domain principal component analysis to identify further systematic errors. The resulting frequency-resolved maps recover strong 12CO(2-1) and 13CO(2-1) emission, and a continuum component whose spectral index discriminates free-free emission in the circumnuclear disk (CND) versus thermal dust emission in the 20 km s$^{-1}$ and 50 km s$^{-1}$ molecular clouds. Broadband continuum flux comparisons with the Bolocam Galactic Plane Survey (BGPS) show agreement to within $\sim$5% in high-SNR molecular clouds in the Sgr A region. From the CO line detections, we estimate a molecular hydrogen mass of between $5.4 \times 10^5 M_\odot$ and $5.7 \times 10^5 M_\odot$, consistent with prior studies. These results demonstrate TIME's ability to recover both continuum and spectral-line signals in complex Galactic fields, validating its readiness for upcoming extragalactic CO and [C II] surveys.

astro-ph.IM↗

arXiv2021

Probing Cosmic Reionization and Molecular Gas Growth with TIME

Line intensity mapping (LIM) provides a unique and powerful means to probe cosmic structures by measuring the aggregate line emission from all galaxies across redshift. The method is complementary to conventional galaxy redshift surveys that are object-based and demand exquisite point-source sensitivity. The Tomographic Ionized-carbon Mapping Experiment (TIME) will measure the star formation rate (SFR) during cosmic reionization by observing the redshifted [CII] 158$μ$m line ($6 \lesssim z \lesssim 9$) in the LIM regime. TIME will simultaneously study the abundance of molecular gas during the era of peak star formation by observing the rotational CO lines emitted by galaxies at $0.5 \lesssim z \lesssim 2$. We present the modeling framework that predicts the constraining power of TIME on a number of observables, including the line luminosity function, and the auto- and cross-correlation power spectra, including synergies with external galaxy tracers. Based on an optimized survey strategy and fiducial model parameters informed by existing observations, we forecast constraints on physical quantities relevant to reionization and galaxy evolution, such as the escape fraction of ionizing photons during reionization, the faint-end slope of the galaxy luminosity function at high redshift, and the cosmic molecular gas density at cosmic noon. We discuss how these constraints can advance our understanding of cosmological galaxy evolution at the two distinct cosmic epochs for TIME, starting in 2021, and how they could be improved in future phases of the experiment.

astro-ph.GA↗

arXiv2020

Commissioning of Namakanui on the JCMT

Namakanui is an instrument containing three inserts in an ALMA type Dewar. The three inserts are Alaihi, Uu and Aweoweo operating around 86, 230 and 345GHz. The receiver is being commissioned on the JCMT. It will be used for both Single dish and VLBI observations. We will present commissioning results and the system.

astro-ph.IM↗

arXiv2018

Electronics Instrumentation for the Greenland Telescope

The Greenland Telescope project has recently participated in an experiment to image the supermassive black hole shadow at the center of M87 using Very Long Baseline Interferometry technique in April of 2018. The antenna consists of the 12-m ALMA North American prototype antenna that was modified to support two auxiliary side containers and to withstand an extremely cold environment. The telescope is currently at Thule Air Base in Greenland with the long-term goal to move the telescope over the Greenland ice sheet to Summit Station. The GLT currently has a single cryostat which houses three dual polarization receivers that cover 84-96 GHz, 213-243 GHz and 271-377 GHz bands. A hydrogen maser frequency source in conjunction with high frequency synthesizers are used to generate the local oscillator references for the receivers. The intermediate frequency outputs of each receiver cover 4-8 GHz and are heterodyned to baseband for digitization within a set of ROACH-2 units then formatted for recording onto Mark-6 data recorders. A separate set of ROACH-2 units operating in parallel provides the function of auto-correlation for real-time spectral analysis. Due to the stringent instrumental stability requirements for interferometry a diagnostic test system was incorporated into the design. Tying all of the above equipment together is the fiber optic system designed to operate in a low temperature environment and scalable to accommodate a larger distance between the control module and telescope for Summit Station. A report on the progress of the above electronics instrumentation system will be provided.

astro-ph.IM↗

arXiv2009

The AMiBA Hexapod Telescope Mount

AMiBA is the largest hexapod astronomical telescope in current operation. We present a description of this novel hexapod mount with its main mechanical components -- the support cone, universal joints, jack screws, and platform -- and outline the control system with the pointing model and the operating modes that are supported. The AMiBA hexapod mount performance is verified based on optical pointing tests and platform photogrammetry measurements. The photogrammetry results show that the deformations in the inner part of the platform are less than 120 micron rms. This is negligible for optical pointing corrections, radio alignment and radio phase errors for the currently operational 7-element compact configuration. The optical pointing error in azimuth and elevation is successively reduced by a series of corrections to about 0.4 arcmin rms which meets our goal for the 7-element target specifications.

astro-ph.CO↗