arXiv subjects

Tadakatsu Ohkubo

Publications and source records attributed to Tadakatsu Ohkubo.

At least 19 recordsLinked to original sources

arXiv2025

Demonstration of surface-engineered oxidation-resistant Nb-Nb thermocompression bonding toward scalable superconducting quantum computing architectures

Scalable quantum computing currently requires a large array of qubit integration, but present two-dimensional interconnects face challenges such as wiring congestion, electromagnetic interference, and limited cryogenic space. To overcome this challenge, implementing three-dimensional (3D) vertical architectures becomes crucial. Niobium (Nb), due to its excellent superconducting characteristics and strong fabrication process compatibility, stands out as a prime material choice. The main challenge in Nb-Nb bonding is the presence of an oxide layer at the interface, even after post-bonding annealing across various bonding methods. The native Nb oxide forms rapidly in air, creating a resistive barrier to supercurrent flow and introducing two-level system losses that degrade qubit coherence while increasing the overall thermal budget. These issues show the need for effective surface engineering to suppress oxidation during bonding. This study introduces an ultrathin gold (Au) capping layer as a passivation strategy to prevent oxygen incorporation at the Nb surface. This approach enables low-temperature Nb-Nb thermocompression bonding at 350 °C under a reduced bonding pressure of 0.495 MPa. Detailed microstructural and interfacial analyses confirm that Au passivation effectively suppresses oxide formation and hence enhances bonding uniformity and strength with keeping the superconductivity, establishing a robust route toward low-temperature, low-pressure Nb-Nb bonding for scalable 3D superconducting quantum computing architectures.

cond-mat.supr-con↗

arXiv2025

Non-equilibrium Magnon Engineering Enabling Significant Thermal Transport Modulation

Thermal conductivity, a fundamental parameter characterizing thermal transport in solids, is typically determined by electron and phonon transport. Although other transport properties including electrical conductivity and thermoelectric conversion coefficients have material-specific values, it is known that thermal conductivity can be modulated artificially via phonon engineering techniques. Here, we demonstrate another way of artificially modulating the heat conduction in solids: magnonic thermal transport engineering. The time-domain thermoreflectance measurements using ferromagnetic metal/insulator junction systems reveal that the thermal conductivity of the ferromagnetic metals and interfacial thermal conductance vary significantly depending on the spatial distribution of nonequilibrium spin currents. Systematic measurements of the thermal transport properties with changing the boundary conditions for spin currents show that the observed thermal transport modulation stems from magnon origin. This observation unveils that magnons significantly contribute to the heat conduction even in ferromagnetic metals at room temperature, upsetting the conventional wisdom that the thermal conductivity mediated by magnons is very small in metals except at low temperatures. The magnonic thermal transport engineering offers a new principle and method for active thermal management.

cond-mat.mtrl-sci↗

arXiv2025

Control of Covalent Bond Enables Efficient Magnetic Cooling

Magnetic cooling, harnessing the temperature change in matter when exposed to a magnetic field, presents an energy-efficient and climate-friendly alternative to traditional vapor-compression refrigeration systems, with a significantly lower global warming potential. The advancement of this technology would be accelerated if irreversible losses arising from hysteresis in magnetocaloric materials were minimized. Despite extensive efforts to manipulate crystal lattice constants at the unit-cell level, mitigating hysteresis often compromises cooling performance. Herein, we address this persistent challenge by forming Sn(Ge)3/Sn(Ge)3 bonds within the unit cell of the Gd5Ge4 compound. Our approach enables an energetically favorable phase transition, leading to the elimination of thermal hysteresis. Consequently, we achieve a synergistic improvement of two key magnetocaloric figures of merit: a larger magnetic entropy change and a twofold increase in the reversible adiabatic temperature change (from 3.8 to 8 K) in the Gd5Sn2Ge2 compound. Such synergies can be extended over a wide temperature range. This study demonstrates a paradigm shift in mastering hysteresis toward simultaneously achieving exceptional magnetocaloric metrics and opens up promising avenues for gas liquefaction applications in the longstanding pursuit of sustainable energy solutions.

cond-mat.mtrl-sci↗

arXiv2025

Light-programmable reorientation of the crystallographic c-axis of Tellurium thin films

Tellurium (Te), a two-dimensional material with pronounced structural anisotropy, exhibits exceptional electrical and optical properties that are highly sensitive to its crystallographic orientation. However, conventional synthesis techniques offer limited control over the in-plane alignment of Te's crystallographic c-axis, hindering large-scale integration. Here, we report a novel, non-contact method to dynamically manipulate the c-axis orientation of Te thin films using linearly polarized picosecond laser pulses. We show that the c-axis can be omnidirectionally reoriented perpendicular to the laser polarization, even in initially polycrystalline films. This reorientation is fully reversible, allowing for rewritable and spatially selective control of the c-axis orientation post-deposition. Our light-driven approach enables programmable anisotropy in Te, opening new avenues for reconfigurable optoelectronic and photonic devices, such as active metasurfaces and CMOS-compatible architectures.

cond-mat.mes-hall↗

arXiv2025

Evidence for single variant in altermagnetic RuO2(101) thin films

Altermagnetism presents intriguing possibilities for spintronic devices due to its unique combination of strong spin-splitting and zero net magnetization. However, realizing its full potential hinges on fabricating single-variant altermagnetic thin films. In this work, we present definitive evidence for the formation of single-variant altermagnetic RuO2(101) thin films with fully epitaxial growth on Al2O3(1-102) r-plane substrates, confirmed through rigorous structural analyses using X-ray diffraction, atomic-resolution transmission electron microscopy and X-ray magnetic linear dichroism. The mutual correspondence of the occupancy of oxygen atoms on the surfaces of RuO2(101)[010] and Al2O3(1-102)[11-20] plays a decisive role in the formation of the single-variant RuO2, which is also supported by our first-principles density functional theory calculations. We further observed spin-splitting magnetoresistance in the single-variant RuO2(101)/CoFeB bilayers, highlighting the characteristic effect of single variant on spin transport. The demonstration of single-variant RuO2(101) films marks a significant advancement in the field of altermagnetism and paves the way for exploring their potential applications.

cond-mat.mtrl-sci↗

arXiv2025

Significant electron-magnon scattering in layered ferromagnet Cr$_2$Te$_3$

A layered ferromagnet Cr$_2$Te$_3$ is attracting growing interest because of its unique electronic and magnetic properties. Studies have shown that it exhibits sizable anomalous Hall effect (AHE) that changes sign with temperature. The origin of the AHE and the sign change, however, remains elusive. Here we show experimentally that electron-magnon scattering significantly contributes to the AHE in Cr$_2$Te$_3$ through magnon induced skew scattering, and that the sign change is caused by the competition with the Berry-curvature or impurity-induced side-jump contribution. The electron-magnon skew scattering is expected to arise from the exchange interaction between the itinerant Te $p$-electrons and the localized Cr $d$-electrons modified by the strong spin-orbit coupling on Te. These results suggest that the magnon-induced skew scattering can dominate the AHE in layered ferromagnets with heavy elements.

cond-mat.mes-hall↗

arXiv2025

Reversal of Spin-torque Polarity with Inverting Current Vorticity in Composition-graded Layer at the Ti/W Interface

While compositional gradient-induced spin-current generation has been explored, its microscopic mechanisms remain poorly understood. Here, the contribution of polarity of compositional gradient on spin-current generation is explored. A nanoscale compositional gradient, formed by in-situ atomic diffusion of ultrathin Ti and W layers, is introduced between 10-nm-thick W and Ti layers. Spin-torque ferromagnetic resonance in ferromagnetic Ni95Cu5 deposited on this gradient reveals that a moderate compositional gradient suppresses negative spin torque from the spin Hall effect in W. In contrast, reversing the Ti/W stacking order, which inverts the gradient, suppresses positive spin torque from the orbital Hall effect in Ti. These findings suggest that the sign of spin torque is governed by the polarity of compositional gradient, providing a novel strategy for efficient spin-torque generation without relying on materials with strong spin or orbital Hall effect.

cond-mat.mtrl-sci↗

arXiv2024

Rapid and Robust construction of an ML-ready peak feature table from X-ray diffraction data using Bayesian peak-top fitting

To advance the development of materials through data-driven scientific methods, appropriate methods for building machine learning (ML)-ready feature tables from measured and computed data must be established. In materials development, X-ray diffraction (XRD) is an effective technique for analysing crystal structures and other microstructural features that have information that can explain material properties. Therefore, the fully automated extraction of peak features from XRD data without the bias of an analyst is a significant challenge. This study aimed to establish an efficient and robust approach for constructing peak feature tables that follow ML standards (ML-ready) from XRD data. We challenge peak feature extraction in the situation where only the peak function profile is known a priori, without knowledge of the measurement material or crystal structure factor. We utilized Bayesian estimation to extract peak features from XRD data and subsequently performed Bayesian regression analysis with feature selection to predict the material property. The proposed method focused only on the tops of peaks within localized regions of interest (ROIs) and extracted peak features quickly and accurately. This process facilitated the rapid extracting of major peak features from the XRD data and the construction of an ML-ready feature table. We then applied Bayesian linear regression to the maximum energy product $(BH)_{max}$, using the extracted peak features as the explanatory variable. The outcomes yielded reasonable and robust regression results. Thus, the findings of this study indicated that \textit{004} peak height and area were important features for predicting $(BH)_{max}$.

cond-mat.mtrl-sci↗

arXiv2023

Creation of flexible spin-caloritronic material with giant transverse thermoelectric conversion by nanostructure engineering

Functional materials such as magnetic, thermoelectric, and battery materials have been revolutionized through nanostructure engineering. However, spin caloritronics, an advancing field based on spintronics and thermoelectrics with fundamental physics studies, has focused only on uniform materials without complex microstructures. Here, we show how nanostructure engineering enables transforming simple magnetic alloys into spin-caloritronic materials displaying significantly large transverse thermoelectric conversion properties. The anomalous Nernst effect (ANE), a promising transverse thermoelectric phenomenon for energy harvesting and heat sensing, has been challenging to utilize due to the scarcity of materials with large anomalous Nernst coefficients. We demonstrate a remarkable improvement in the anomalous Nernst coefficients in flexible Fe-based amorphous materials through nanostructural engineering, without altering their composition. This surpasses all reported amorphous alloys and is comparable to single crystals showing large ANE. The enhancement is attributed to Cu nano-clustering, facilitating efficient transverse thermoelectric conversion. This discovery advances the materials science of spin caloritronics, opening new avenues for designing high-performance transverse thermoelectric devices for practical applications.

cond-mat.mtrl-sci↗

arXiv2023

Fully epitaxial fcc(111) magnetic tunnel junctions with a Co90Fe10/MgAlO/Co90Fe10 structure

Magnetic tunnel junctions (MTJs) with bcc(001)-type structures such as Fe(001)/MgO(001)/Fe(001), have been widely used as the core of various spintronic devices such as magnetoresistive memories; however, the limited material selection of (001)-type MTJs hinders the further development of spintronic devices. Here, as an alternative to the (001)-type MTJs, an fcc(111)-type MTJ using a fully epitaxial CoFe/rock-salt MgAlO (MAO)/CoFe is explored to introduce close-packed lattice systems into MTJs. Using an atomically flat Ru(0001) epitaxial buffer layer, fcc(111) epitaxial growth of the CoFe/MAO/CoFe trilayer is achieved. Sharp CoFe(111)/MAO(111) interfaces are confirmed due to the introduction of periodic dislocations by forming a 5:6 in-plane lattice matching structure. The fabricated (111) MTJ exhibits a tunnel magnetoresistance ratio of 37% at room temperature (47% at 10 K). Symmetric differential conductance curves with respect to bias polarity are observed, indicating the achievement of nearly identical upper and lower MAO interface qualities. Despite the charge-uncompensated (111) orientation for a rock-salt-like MAO barrier, the achievement of flat, stable, and spin-polarized barrier interfaces opens a promising avenue for expanding the design of MTJ structures.

cond-mat.mtrl-sci↗

arXiv2023

Oxide layer dependent orbital torque efficiency in ferromagnet/Cu/Oxide heterostructures

The utilization of orbital transport provides a versatile and efficient spin manipulation mechanism. As interest in orbital-mediated spin manipulation grows, we face a new issue to identify the underlying physics that determines the efficiency of orbital torque (OT). In this study, we systematically investigate the variation of OT governed by orbital Rashba-Edelstein effect at the Cu/Oxide interface, as we change the Oxide material. We find that OT varies by a factor of ~2, depending on the Oxide. Our results suggest that the active electronic interatomic interaction (hopping) between Cu and oxygen atom is critical in determining OT. This also gives us an idea of what type of material factors is critical in forming a chiral orbital Rashba texture at the Cu/Oxide interface.

cond-mat.mtrl-sci↗

arXiv2022

Sm-Co-based amorphous alloy films for zero-field operation of transverse thermoelectric generation

Transverse thermoelectric generation using magnetic materials is essential to develop active thermal engineering technologies, for which the improvements of not only the thermoelectric output but also applicability and versatility are required. In this study, using combinatorial material science and lock-in thermography technique, we have systematically investigated the transverse thermoelectric performance of Sm-Co-based alloy films. The high-throughput material investigation revealed the best Sm-Co-based alloys with the large anomalous Nernst effect (ANE) as well as the anomalous Ettingshausen effect (AEE). In addition to ANE/AEE, we discovered unique and superior material properties in these alloys: the amorphous structure, low thermal conductivity, and large in-plane coercivity and remanent magnetization. These properties make it advantageous over conventional materials to realize heat flux sensing applications based on ANE, as our Sm-Co-based films can generate thermoelectric output without an external magnetic field. Importantly, the amorphous nature enables the fabrication of these films on various substrates including flexible sheets, making the large-scale and low-cost manufacturing easier. Our demonstration will provide a pathway to develop flexible transverse thermoelectric devices for smart thermal management.

cond-mat.mtrl-sci↗

arXiv2021

Deterministic influence of substrate-induced oxygen vacancy diffusion on $Bi_{2}WO_{6}$ thin film growth

In oxide epitaxy, the growth temperature and background oxygen partial pressure are considered as the most critical factors that control the phase stability of an oxide thin film. Here, we report an unusual case wherein diffusion of oxygen vacancies from the substrate overpowers the growth temperature and oxygen partial pressure to deterministically influence the phase stability of $Bi_{2}WO_{6}$ thin film grown by the pulsed laser deposition technique. We show that when grown on an oxygen-deficient $SrTiO_{3}$ substrate, the $Bi_{2}WO_{6}$ film exhibits a mixture of (001) and (100)/(010)-oriented domains alongside (001)-oriented impurity $WO_{3}$ phases. The (100)/(010)-oriented $Bi_{2}WO_{6}$ phases form a self-organized 3D nanopillar-structure, yielding a very rough film surface morphology. Oxygen annealing of the substrate or using a few monolayer-thick $SrRuO_{3}$ as the blocking layer for oxygen vacancy diffusion enables growing high-quality single-crystalline $Bi_{2}WO_{6}$ (001) thin film exhibiting an atomically smooth film surface with step-terrace structure. We propose that the large oxide-ion conductivity of $Bi_{2}WO_{6}$ facilitates diffusion of oxygen vacancies from the substrate during the film growth, accelerating the evaporation of volatile Bismuth (Bi), which hinders the epitaxial growth. Our work provides a general guideline for high-quality thin film growth of Aurivillius compounds and other oxide-ion conductors containing volatile elements.

cond-mat.mtrl-sci↗

arXiv2020

Exceeding 400% tunnel magnetoresistance at room temperature in epitaxial Fe/MgO/Fe(001) spin-valve-type magnetic tunnel junctions

Giant tunnel magnetoresistance (TMR) ratios of 417% at room temperature (RT) and 914% at 3 K were demonstrated in epitaxial Fe/MgO/Fe(001) exchanged-biased spin-valve magnetic tunnel junctions (MTJs) by tuning growth conditions for each layer, combining sputter deposition for the Fe layers, electron-beam evaporation of the MgO barrier, and barrier interface tuning. Clear TMR oscillation as a function of the MgO thickness with a large peak-to-valley difference of ~80% was observed when the layers were grown on a highly (001)-oriented Cr buffer layer. Specific features of the observed MTJs are symmetric differential conductance (dI/dV) spectra for the bias polarity and plateau-like deep local minima in dI/dV (parallel configuration) at |V| = 0.2~0.5 V. At 3K, fine structures with two dips emerge in the plateau-like dI/dV, reflecting highly coherent tunneling through the Fe/MgO/Fe. We also observed a 496% TMR ratio at RT by a 2.24-nm-thick-CoFe insertion at the bottom-Fe/MgO interface.

cond-mat.mtrl-sci↗

arXiv2020

Transient response of spin Peltier effect revealed by lock-in thermoreflectance measurement

Transient response of the spin Peltier effect (SPE) in a Pt/yttrium iron garnet junction system has been investigated by means of a lock-in thermoreflectance method. We applied an alternating charge current to the Pt layer to drive SPE through the spin Hall effect, and measured the AC response of the resultant SPE-induced temperature modulation at frequencies ranging from 10 Hz to 1 MHz. We found that the SPE-induced temperature modulation decreases with increasing the frequency when the frequency is >1 kHz. This is a characteristic feature of SPE revealed by the high frequency measurements based on the lock-in thermoreflectance, while previous low frequency measurements showed that the SPE signal is independent of the frequency. We attribute the decrease of the temperature modulation to the length scale of the SPE-induced heat current; by comparing the experimental results with one-dimensional heat conduction calculations, the length scale of SPE is estimated to be 0.94 μm.

cond-mat.mtrl-sci↗

arXiv2019

The spin Hall effect of Bi-Sb alloys driven by thermally excited Dirac-like electrons

We have studied the charge to spin conversion in Bi$_{1-x}$Sb$_x$/CoFeB heterostructures. The spin Hall conductivity (SHC) of the sputter deposited heterostructures exhibits a high plateau at Bi-rich compositions, corresponding to the topological insulator phase, followed by a decrease of SHC for Sb-richer alloys, in agreement with the calculated intrinsic spin Hall effect of Bi$_{1-x}$Sb$_x$ alloy. The SHC increases with increasing thickness of the Bi$_{1-x}$Sb$_x$ alloy before it saturates, indicating that it is the bulk of the alloy that predominantly contributes to the generation of spin current; the topological surface states, if present in the films, play little role. Surprisingly, the SHC is found to increase with increasing temperature, following the trend of carrier density. These results suggest that the large SHC at room temperature, with a spin Hall efficiency exceeding 1 and an extremely large spin current mobility, is due to increased number of Dirac-like, thermally-excited electrons in the $L$ valley of the narrow gap Bi$_{1-x}$Sb$_x$ alloy.

cond-mat.mes-hall↗

arXiv2016

MgGa2O4 spinel barrier for magnetic tunnel junctions: coherent tunneling and low barrier height

Epitaxial Fe/magnesium gallium spinel oxide (MgGa2O4)/Fe(001) magnetic tunnel junctions (MTJs) were fabricated by magnetron sputtering. Tunnel magnetoresistance (TMR) ratio up to 121% at room temperature (196% at 4 K) was observed, suggesting a TMR enhancement by the coherent tunneling effect in the MgGa2O4 barrier. The MgGa2O4 layer had a spinel structure and it showed good lattice matching with the Fe layers owing to slight tetragonal lattice distortion of MgGa2O4. Barrier thickness dependence of the tunneling resistance and current-voltage characteristics revealed that the barrier height of the MgGa2O4 barrier is much lower than that in an MgAl2O4 barrier. This study demonstrates the potential of Ga-based spinel oxides for MTJ barriers having a large TMR ratio at a low resistance area product.

cond-mat.mtrl-sci↗

arXiv2016

Effect of Mg-Al insertion on magnetotransport properties in epitaxial Fe/sputter-deposited $MgAl_{2}O_{4}$/Fe(001) magnetic tunnel junctions

We investigated the effect of a Mg-Al layer insertion at the bottom interface of epitaxial Fe/$MgAl_{2}O_{4}$/Fe(001) magnetic tunnel junctions (MTJs) on their spin-dependent transport properties. The tunnel magnetoresistance (TMR) ratio and differential conductance spectra for the parallel magnetic configuration exhibited clear dependence on the inserted Mg-Al thickness. A slight Mg-Al insertion (thickness < 0.1 nm) was effective for obtaining a large TMR ratio above 200% at room temperature and observing a distinct local minimum structure in conductance spectra. In contrast, thicker Mg-Al (> 0.2 nm) induced a reduction of TMR ratios and featureless conductance spectra, indicating a degradation of the bottom-Fe/$MgAl_{2}O_{4}$ interface. Therefore, a minimal Mg-Al insertion was found to be effective to maximize the TMR ratio for a sputtered $MgAl_{2}O_{4}$-based MTJ.

cond-mat.mtrl-sci↗