arXiv subjects

Tadayuki Takahashi

Publications and source records attributed to Tadayuki Takahashi.

At least 55 records · Page 3Linked to original sources

arXiv2019

Probing entanglement in Compton interactions

This theoretical research aims to examine areas of the Compton cross section of entangled annihilation photons for the purpose of testing for possible break down of theory, which could have consequences for predicted optimal capabilities of Compton PET systems.We provide maps of the cross section for entangled annihilation photons for experimental verification.We introduce a strategy to derive cross sections in a relatively straight forward manner for the Compton scattering of a hypothetical separable, mixed and entangled states. To understand the effect that entanglement has on the cross section for annihilation photons, we derive the cross section so that it is expressed in terms of the cross section of a hypothetical separable state and of a hypothetical forbidden maximally entangled state.We find lobe-like structures in the cross section which are regions where entanglement has the greatest effect.We also find that mixed states do not reproduce the cross section for annihilation photons, contrary to a recent investigation which reported otherwise.We review the motivation and method of the most precise Compton scattering experiment for annihilation photons, in order to resolve conflicting reports regarding the extent to which the cross section itself has been experimentally verified.

physics.optics↗

arXiv2019

The thermal-radiative wind in low mass X-ray binary H 1743-322; Radiation hydrodynamic simulations

Blueshifted absorption lines are seen in high inclination black hole binary systems in their disc dominated states, showing these power an equatorial disc wind. While some contribution from magnetic winds remain a possibility, thermal and thermal-radiative winds are expected to be present. We show results from radiation hydrodynamic simulations which show that the additional radiation force from atomic features (bound-free and lines) are important along with electron scattering. Together, these increase the wind velocity at high inclinations, so that they quantitatively match the observations in H 1743-322, unlike purely thermal winds which are too slow. We highlight the role played by shadowing of the outer disc from the (sub grid) inner disc Compton heated layer, and show that the increase in shadow from the higher Compton temperature after the spectral transition to the hard state leads to strong suppression of the wind. Thermal-radiative winds explain all of the spectral features (and their disappearance) in this simplest wind system and magnetic winds play only a minor role. We speculate that thermal-radiative winds can explain all the spectral features seen in the more complex (larger disc size) binaries, GRO J1655-40 and GRS 1915+105, without requiring magnetic winds.

astro-ph.HE↗

arXiv2018

Suzaku X-ray observations of the mixed-morphology supernova remnant CTB 1

We present an X-ray study of the mixed-morphology supernova remnant CTB 1 (G116.9+0.2) observed with Suzaku. The 0.6-2.0 keV spectra in the northeast breakout region of CTB 1 are well represented by a collisional ionization-equilibrium plasma model with an electron temperature of ~ 0.3 keV, whereas those in the southwest inner-shell region can be reproduced by a recombining plasma model with an electron temperature of ~ 0.2 keV, an initial ionization temperature of ~ 3 keV, and an ionization parameter of ~ 9 $\times$ 10$^{11}$ cm$^{-3}$s. This is the first detection of the recombining plasma in CTB 1. The electron temperature in the inner-shell region decreases outwards, which implies that the recombining plasma is likely formed by the thermal conduction via interaction with the surrounding cold interstellar medium. The Ne abundance is almost uniform in the observed regions whereas Fe is more abundant toward the southwest of the remnant, suggesting an asymmetric ejecta distribution. We also detect a hard tail above the 2 keV band that is fitted with a power-law function with a photon index of 2-3. The flux of the hard tail in the 2-10 keV band is ~ 5 $\times$ 10$^{-13}$ erg cm$^{-2}$ s$^{-1}$ and is peaked at the center of CTB 1. Its origin is unclear but one possibility is a putative pulsar wind nebula associated with CTB 1.

astro-ph.HE↗

arXiv2018

The FORCE mission : Science aim and instrument parameter for broadband X-ray imaging spectroscopy with good angular resolution

FORCE is a 1.2 tonnes small mission dedicated for wide-band fine-imaging x-ray observation. It covers from 1 to 80 keV with a good angular resolution of $15"$ half-power-diameter. It is proposed to be launched around mid-2020s and designed to reach a limiting sensitivity as good as $F_X (10-40~{\rm keV}) = 3 \times 10^{-15}$~erg cm$^{-2}$ s$^{-1}$ keV$^{-1}$ within 1~Ms. This number is one order of magnitude better than current best one. With its high-sensitivity wide-band coverage, FORCE will probe the new science field of "missing BHs", searching for families of black holes of which populations and evolutions are not well known. Other point-source and diffuse-source sciences are also considered. FORCE will also provide the "hard x-ray coverage" to forthcoming large soft x-ray observatories.

astro-ph.IM↗

arXiv2018

In-orbit performance and calibration of the Hard X-ray Imager onboard Hitomi (ASTRO-H)

The Hard X-ray Imager (HXI) onboard Hitomi (ASTRO-H) is an imaging spectrometer covering hard X-ray energies of 5-80 keV. Combined with the hard X-ray telescope, it enables imaging spectroscopy with an angular resolution of $1^\prime.7$ half-power diameter, in a field of view of $9^\prime\times9^\prime$. The main imager is composed of 4 layers of Si detectors and 1 layer of CdTe detector, stacked to cover wide energy band up to 80 keV, surrounded by an active shield made of BGO scintillator to reduce the background. The HXI started observations 12 days before the Hitomi loss, and successfully obtained data from G21.5$-$0.9, Crab and blank sky. Utilizing these data, we calibrate the detector response and study properties of in-orbit background. The observed Crab spectra agree well with a powerlaw model convolved with the detector response, within 5% accuracy. We find that albedo electrons in specified orbit strongly affect the background of Si top layer, and establish a screening method to reduce it. The background level over the full field of view after all the processing and screening is as low as the pre-flight requirement of $1$-$3\times10^{-4}$ counts s$^{-1}$ cm$^{-2}$ keV$^{-1}$.

astro-ph.IM↗

arXiv2018

Imaging and spectral performance of CdTe double-sided strip detectors for the Hard X-ray Imager onboard ASTRO-H

The imaging and spectral performance of CdTe double-sided strip detectors (CdTe-DSDs) was evaluated for the ASTRO-H mission. The charcterized CdTe-DSDs have a strip pitch of 0.25 mm, an imaging area of 3.2 cm$\times$3.2 cm and a thickness of 0.75 mm. The detector was successfully operated at a temperature of $-20^\circ$C and with an applied bias voltage of 250 V. By using two-strip events as well as one-strip events for the event reconstruction, a good energy resolution of 2.0 keV at 59.5 keV and a sub-strip spatial resolution was achieved. The hard X-ray and gamma-ray response of CdTe-DSDs is complex due to the properties of CdTe and the small pixel effect. Therefore, one of the issues to investigate is the response of the CdTe-DSD. In order to investigate the spatial dependence of the detector response, we performed fine beam scan experiments at SPring-8, a synchrotron radiation facility. From these experiments, the depth structure of the electric field was determined as well as properties of carriers in the detector and successfully reproduced the experimental data with simulated spectra.

astro-ph.IM↗

arXiv2018

Modeling of proton-induced radioactivation background in hard X-ray telescopes: Geant4-based simulation and its demonstration by Hitomi's measurement in a low Earth orbit

Hard X-ray astronomical observatories in orbit suffer from a significant amount of background due to radioactivation induced by cosmic-ray protons and/or geomagnetically trapped protons. Within the framework of a full Monte Carlo simulation, we present modeling of in-orbit instrumental background dominated by radioactivation. To reduce the computation time required by straightforward simulations of delayed emissions from activated isotopes, we insert a semi-analytical calculation that converts production probabilities of radioactive isotopes by interaction of the primary protons into decay rates at measurement time of all secondary isotopes. Therefore, our simulation method is separated into three steps: (1) simulation of isotope production, (2) semi-analytical conversion to decay rates, and (3) simulation of decays of the isotopes at measurement time. This method is verified by a simple setup that has a CdTe semiconductor detector, and shows a 100-fold improvement in efficiency over the straightforward simulation. The simulation framework was tested against data measured with a CdTe sensor in the Hard X-ray Imager onboard the Hitomi X-ray Astronomy Satellite, which was put into a low Earth orbit with an altitude of 570 km and an inclination of 31 degrees, and thus experienced a large amount of irradiation from geomagnetically trapped protons during its passages through the South Atlantic Anomaly. The simulation is able to treat full histories of the proton irradiation and multiple measurement windows. The simulation results agree very well with the measured data, showing that the measured background is well described by the combination of proton-induced radioactivation of the CdTe detector itself and thick Bi4Ge3O12 scintillator shields, leakage of cosmic X-ray background and albedo gamma-ray radiation, and emissions from naturally contaminated isotopes in the detector system.

astro-ph.IM↗

arXiv2018

Monte-Carlo simulations of the detailed iron absorption line profiles from thermal winds in X-ray binaries

Blue shifted absorption lines from highly ionised iron are seen in some high inclination X-ray binary systems, indicating the presence of an equatorial disc wind. This launch mechanism is under debate, but thermal driving should be ubiquitous. X-ray irradiation from the central source heats disc surface, forming a wind from the outer disc where the local escape velocity is lower than the sound speed. The mass loss rate from each part of the disc is determined by the luminosity and spectral shape of the central source. We use these together with an assumed density and velocity structure of the wind to predict the column density and ionisation state, then combine this with a Monte Carlo radiation transfer to predict the detailed shape of the absorption (and emission) line profiles. We test this on the persistent wind seen in the bright neutron star binary GX 13+1, with luminosity L/LEdd ~ 0.5. We approximately include the effect of radiation pressure because of high luminosity, and compute line features. We compare these to the highest resolution data, the Chandra third order grating spectra, which we show here for the first time. This is the first physical model for the wind in this system, and it succeeds in reproducing many of the features seen in the data, showing that the wind in GX13+1 is most likely a thermal-radiation driven wind. This approach, combined with better streamline structures derived from full radiation hydrodynamic simulations, will allow future calorimeter data to explore the detail wind structure.

astro-ph.HE↗

arXiv2017

Search For Gravitational Redshifted Absorption Lines In LMXB Serpens X-1

The equation of state for ultra-dense matter can be tested from observations of the ratio of mass to radius of neutron stars. This could be measured precisely from the redshift of a narrow line produced on the surface. X-rays bursts have been intensively searched for such features, but so far without detection. Here instead we search for redshifted lines in the persistent emission, where the accretion flow dominates over the surface emission. We discuss the requirements for narrow lines to be produced, and show that narrow absorption lines from highly ionized iron can potentially be observable in accreting low mass X-ray binaries (low B field) which have either low spin or low inclination so that Doppler broadening is small. This selects Serpens X-1 as the only potential candidate persistent LMXB due to its low inclination. Including surface models in the broad band accretion flow model predicts that the absorption line from He-like iron at 6.7 keV should be redshifted to $\sim$ 5.1 - 5.7 keV (10 - 15 km for $1.4\mathrm{M_\odot}$) and have an equivalent width of 0.8 - 8.0 eV for surface temperatures of 7 - 10 $\times$ 10$^6$ K. We use the high resolution Chandra grating data to give a firm upper limit of 2 - 3 eV for an absorption line at $\sim 5$ keV. We discuss possible reasons for this lack of detection (the surface temperature and the geometry of the boundary layer etc.). Future instruments with better sensitivity are required in order to explore the existence of such features.

astro-ph.HE↗

arXiv2017

Time Assignment System and Its Performance aboard the Hitomi Satellite

Fast timing capability in X-ray observation of astrophysical objects is one of the key properties for the ASTRO-H (Hitomi) mission. Absolute timing accuracies of 350 micro second or 35 micro second are required to achieve nominal scientific goals or to study fast variabilities of specific sources. The satellite carries a GPS receiver to obtain accurate time information, which is distributed from the central onboard computer through the large and complex SpaceWire network. The details on the time system on the hardware and software design are described. In the distribution of the time information, the propagation delays and jitters affect the timing accuracy. Six other items identified within the timing system will also contribute to absolute time error. These error items have been measured and checked on ground to ensure the time error budgets meet the mission requirements. The overall timing performance in combination with hardware performance, software algorithm, and the orbital determination accuracies, etc, under nominal conditions satisfies the mission requirements of 35 micro second. This work demonstrates key points for space-use instruments in hardware and software designs and calibration measurements for fine timing accuracy on the order of microseconds for mid-sized satellites using the SpaceWire (IEEE1355) network.

astro-ph.IM↗

arXiv2017

Development of Si-CMOS hybrid detectors towards electron tracking based Compton imaging in semiconductor detectors

Electron tracking based Compton imaging is a key technique to improve the sensitivity of Compton cameras by measuring the initial direction of recoiled electrons. To realize this technique in semiconductor Compton cameras, we propose a new detector concept, Si-CMOS hybrid detector. It is a Si detector bump-bonded to a CMOS readout integrated circuit to obtain electron trajectory images. To acquire the energy and the event timing, signals from N-side are also read out in this concept. By using an ASIC for the N-side readout, the timing resolution of few us is achieved. In this paper, we present the results of two prototypes with 20 um pitch pixels. The images of the recoiled electron trajectories are obtained with them successfully. The energy resolutions (FWHM) are 4.1 keV (CMOS) and 1.4 keV (N-side) at 59.5 keV. In addition, we confirmed that the initial direction of the electron is determined using the reconstruction algorithm based on the graph theory approach. These results show that Si-CMOS hybrid detectors can be used for electron tracking based Compton imaging.

astro-ph.IM↗

arXiv2017

A compact imaging system with a CdTe double-sided strip detector for non-destructive analysis using negative muonic X-rays

A CdTe double-sided strip detector (CdTe-DSD) is an ideal device for imaging and spectroscopic measure- ments in the hard X-ray range above 10 keV. Recent development enables us to realize an imager with a detection area of ~10 cm${^2}$. An energy resolution of 1-2 keV (FWHM) and a position resolution of a few hundred μm are available from the detector. This type of imager has been long awaited for non-destructive elemental analysis, especially by using negative muons, because energies of characteristic X-rays from muonic atoms are about 200 time higher than those from normal atoms. With the method that uses negative muons, hard X-ray information gives the spatial distribution of elements in samples at a certain depth defined by the initial momentum of the muon beam. In order to study three-dimensional imaging capability of the method, we have developed a compact imaging system based on CdTe-DSD and a ϕ3 mm pinhole collimator as the first prototype. We conducted experiments with samples which consist of layers of Al, BN and LiF irradiated by negative muon beams in MUSE/J-PARC and successfully reconstruct hard X-ray images of muonic X-rays from B, N and F at various depths.

physics.ins-det↗

arXiv2017

High-speed X-ray imaging spectroscopy system with Zynq SoC for solar observations

We have developed a system combining a back-illuminated Complementary-Metal-Oxide-Semiconductor (CMOS) imaging sensor and Xilinx Zynq System-on-Chip (SoC) device for a soft X-ray (0.5-10 keV) imaging spectroscopy observation of the Sun to investigate the dynamics of the solar corona. Because typical timescales of energy release phenomena in the corona span a few minutes at most, we aim to obtain the corresponding energy spectra and derive the physical parameters, i.e., temperature and emission measure, every few tens of seconds or less for future solar X-ray observations. An X-ray photon-counting technique, with a frame rate of a few hundred frames per second or more, can achieve such results. We used the Zynq SoC device to achieve the requirements. Zynq contains an ARM processor core, which is also known as the Processing System (PS) part, and a Programmable Logic (PL) part in a single chip. We use the PL and PS to control the sensor and seamless recording of data to a storage system, respectively. We aim to use the system for the third flight of the Focusing Optics Solar X-ray Imager (FOXSI-3) sounding rocket experiment for the first photon-counting X-ray imaging and spectroscopy of the Sun.

astro-ph.IM↗

arXiv2017

Revisiting the extremely fast disc wind in a gravitationally lensed quasar APM 08279+5255

The gravitationally lensed quasar APM 08279+5255 has the fastest claimed wind from any AGN, with velocities of 0.6-0.7c, requiring magnetic acceleration as special relativisitic effects limit all radiatively driven winds to v<0.3-0.5c. However, this extreme velocity derives from interpreting both the narrow and broad absorption features in the X-ray spectrum as iron absorption lines. The classic ultrafast outflow source PDS 456 also shows similar absorption systems, but here the higher energy, broader feature is generally interpreted as an absorption edge. We reanalyse all the spectra from APM 08279+5255 using a full 3-dimensional Monte Carlo radiative transfer disc wind model for the ionised wind at 0.1-0.2c, together with complex absorption from lower ionisation material, and find that this is a better description of the data. Thus there is no strong requirement for outflow velocities beyond 0.2c, which can be powered by radiation driving. We show that UV line driving is especially likely given the spectral energy distribution of this source which is intrinsically UV bright and X-ray weak. While the peak of this emission is unobservable, it must be luminous enough to power the observed hot dust, favouring at least moderate black hole spin.

astro-ph.HE↗

arXiv2017

An X-ray spectral variability of fast disk winds in AGN

Recent X-ray observations of blue-shifted absorption lines revealed an existence of the extremely fast disk winds with outflow velocities of ~0.1-0.3c. Such fast outflows would have a large impact on the coevolution of black holes and host galaxies since they are expected to carry a large amount of kinetic energy. One of the common characteristics of these fast winds is a strong time variability of the absorption feature. To investigate this variability, we have developed a new X-ray spectral model of the disk winds, which is generated by 3-dimensional Monte Carlo radiation transfer simulations on the assumption of the realistic wind geometry. By applying our wind model to the multi-epoch X-ray data of an archetypal wind source PDS 456, we find the variability in the absorption line is explained by a change of the wind outflowing angle without any large variability in the mass outflow rate of the wind. This result indicates that the fast disk winds are stable and that local hydrodynamic instabilities produce a large time variability of the absorption line. Moreover, we also apply our wind model to the disk-line source 1H 0707-495. The characteristic Fe-K feature in this source is successfully reproduced our disk wind model for all the observations.

astro-ph.HE↗

arXiv2016

Study of the Polarimetric Performance of a Si/CdTe Semiconductor Compton Camera for the Hitomi Satellite

Gamma-ray polarization offers a unique probes into the geometry of the gamma-ray emission process in celestial objects. The Soft Gamma-ray Detector (SGD) onboard the X-ray observatory Hitomi is a Si/CdTe Compton camera and is expected to be an excellent polarimeter, as well as a highly sensitive spectrometer due to its good angular coverage and resolution for Compton scattering. A beam test of the final-prototype for the SGD Compton camera was conducted to demonstrate its polarimetric capability and to verify and calibrate the Monte Carlo simulation of the instrument. The modulation factor of the SGD prototype camera, evaluated for the inner and outer parts of the CdTe sensors as absorbers, was measured to be 0.649--0.701 (inner part) and 0.637--0.653 (outer part) at 122.2 keV and 0.610--0.651 (inner part) and 0.564--0.592 (outer part) at 194.5 keV at varying polarization angles with respect to the detector. This indicates that the relative systematic uncertainty of the modulation factor is as small as ~3%.

astro-ph.IM↗

arXiv2016

Sensitivity of the Fe K-alpha Compton shoulder to the geometry and variability of the X-ray illumination of cosmic objects

In an X-ray reflection spectrum, a tail-like spectral feature generated via Compton down-scattering, known as a Compton shoulder (CS), appears at the low-energy side of the iron K$α$ line. Despite its great diagnostic potential, its use as a spectral probe of the reflector has been seriously limited due to observational difficulties and modelling complexities. We revisit the basic nature of the CS by systematic investigation into its dependence on spatial and temporal parameters. The calculations are performed by Monte-Carlo simulations for sphere and slab geometries. The dependence is obtained in a two-dimensional space of column density and metal abundance, demonstrating that the CS solves parameter degeneration between them which was seen in conventional spectral analysis using photoelectric absorption and fluorescence lines. Unlike the iron line, the CS does not suffer from any observational dependence on the spectral hardness. The CS profile is highly dependent on the inclination angle of the slab geometry unless the slab is Compton-thick, and the time evolution of the CS is shown to be useful to constrain temporal information on the source if the intrinsic radiation is variable. We also discuss how atomic binding of the scattering electrons in cold matter blurs the CS profile, finding that the effect is practically similar to thermal broadening in a plasma with a moderate temperature of $\sim$5 eV. Spectral diagnostics using the CS is demonstrated with grating data of X-ray binary GX 301$-$2, and will be available in future with high-resolution spectra of active galactic nuclei obtained by microcalorimeters.

astro-ph.HE↗

arXiv2016

A disk wind interpretation of the strong Fe Kα features in 1H 0707-495

1H 0707-495 is the most convincing example of a supermassive black hole with an X-ray spectrum being dominated by extremely smeared, relativistic reflection, with the additional requirement of strongly supersoler iron abundance. However, here we show that the iron features in its 2--10 keV spectrum are rather similar to the archetypal wind dominated source, PDS 456. We fit all the 2--10 keV spectra from 1H 0707-495 using the same wind model as used for PDS 456, but viewed at higher inclination so that the iron absorption line is broader but not so blueshifted. This gives a good overall fit to the data from 1H 0707-495, and an extrapolation of this model to higher energies also gives a good match to the NuSTAR data. Small remaining residuals indicate that the iron line emission is stronger than in PDS 456. This is consistent with the wider angle wind expected from a continuum driven wind from the super-Eddington mass accretion rate in 1H 0707-495, and/or the presence of residual reflection from the underlying disk though the presence of the absorption line in the model removes the requirement for highly relativistic smearing, and highly supersoler iron abundance. We suggest that the spectrum of 1H 0707-495 is sculpted more by absorption in a wind than by extreme relativistic effects in strong gravity.

astro-ph.HE↗