arXiv subjects

Taekwan Yoon

Publications and source records attributed to Taekwan Yoon.

6 recordsLinked to original sources

arXiv2025

Frequency-modulated enhancement of microwave resonator sensing

We use the Pound-Drever-Hall (PDH) technique to characterize the frequency stability of a microwave-frequency surface acoustic wave (SAW) resonator-based sensor. The multi-mode acoustic resonator is integrated in a notch geometry with a transmission line, all fabricated on Y-cut lithium niobate. We measure the amplitude and phase of the resonator transfer function and the PDH signal across the resonator full spectral range. We use these measurements to emphasize the differences between the PDH measurement and a standard Phase-Locked Loop (PLL) technique. As compared to a PLL, we demonstrate that PDH is insensitive to phase error and exhibits a reduced Allan deviation of the center frequency measurement, in each case by up to an order of magnitude. The method rejects spurious effects and background frequency drift, demonstrating the enhancements possible with PDH-based measurements, which can be realized in a wide range of microwave-frequency resonator-based sensors and devices.

physics.app-ph↗

arXiv2025

Lifetime-limited Gigahertz-frequency Mechanical Oscillators with Millisecond Coherence Times

High-frequency mechanical oscillators with long coherence times are essential to realizing a variety of high-fidelity quantum sensors, transducers, and memories. However, the unprecedented coherence times needed for quantum applications require exquisitely sensitive new techniques to probe the material origins of phonon decoherence and new strategies to mitigate decoherence in mechanical oscillators. Here, we combine non-invasive laser spectroscopy techniques with materials analysis to identify key sources of phonon decoherence in crystalline media. Using micro-fabricated high-overtone bulk acoustic-wave resonators ($\mu$HBARs) as an experimental testbed, we identify phonon-surface interactions as the dominant source of phonon decoherence in crystalline quartz; lattice distortion, subsurface damage, and high concentration of elemental impurities near the crystal surface are identified as the likely causes. Removal of this compromised surface layer using an optimized polishing process is seen to greatly enhance coherence times, enabling $\mu$HBARs with Q-factors of > 240 million at 12 GHz frequencies, corresponding to > 6 ms phonon coherence times and record-level f-Q products. Complementary phonon linewidth and time-domain ringdown measurements, performed using a new Brillouin-based pump-probe spectroscopy technique, reveal negligible dephasing within these oscillators. Building on these results, we identify a path to > 100 ms coherence times as the basis for high-frequency quantum memories. These findings clearly demonstrate that, with enhanced control over surfaces, dissipation and noise can be significantly reduced in a wide range of quantum systems.

quant-ph↗

arXiv2024

Quantum optomechanical control of long-lived bulk acoustic phonons

High-fidelity quantum optomechanical control of a mechanical oscillator requires the ability to perform efficient, low-noise operations on long-lived phononic excitations. Microfabricated high-overtone bulk acoustic wave resonators ($\mathrm{\mu}$HBARs) have been shown to support high-frequency (> 10 GHz) mechanical modes with exceptionally long coherence times (> 1.5 ms), making them a compelling resource for quantum optomechanical experiments. In this paper, we demonstrate a new optomechanical system that permits quantum optomechanical control of individual high-coherence phonon modes supported by such $\mathrm{\mu}$HBARs for the first time. We use this system to perform laser cooling of such ultra-massive (7.5 $\mathrm{\mu}$g) high frequency (12.6 GHz) phonon modes from an occupation of ${\sim}$22 to fewer than 0.4 phonons, corresponding to laser-based ground-state cooling of the most massive mechanical object to date. Through these laser cooling experiments, no absorption-induced heating is observed, demonstrating the resilience of the $\mathrm{\mu}$HBAR against parasitic heating. The unique features of such $\mathrm{\mu}$HBARs make them promising as the basis for a new class of quantum optomechanical systems that offer enhanced robustness to decoherence, necessary for efficient, low-noise photon-phonon conversion.

quant-ph↗

arXiv2023

Simultaneous Brillouin and piezoelectric coupling to a high-frequency bulk acoustic resonator

Bulk acoustic resonators support robust, long-lived mechanical modes, capable of coupling to various quantum systems. In separate works, such devices have achieved strong coupling to both superconducting qubits, via piezoelectricity, and optical cavities, via Brillouin interactions. In this work, we present a novel hybrid microwave/optical platform capable of coupling to bulk acoustic waves through cavity-enhanced piezoelectric and photoelastic interactions. The modular, tunable system achieves fully resonant and well-mode-matched interactions between a 3D microwave cavity, a high-frequency bulk acoustic resonator, and a Fabry Perot cavity. We realize this piezo-Brillouin interaction in x-cut quartz, demonstrating the potential for strong optomechanical interactions and high cooperativity using optical cavity enhancement. We further show how this device functions as a bidirectional electro-opto-mechanical transducer, with quantum efficiency exceeding $10^{-8}$, and a feasible path towards unity conversion efficiency. The high optical sensitivity and ability to apply large resonant microwave field in this system also offers a new tool for probing anomalous electromechanical couplings, which we demonstrate by investigating (nominally-centrosymmetric) CaF$_2$ and revealing a parasitic piezoelectricity of 83 am/V. Such studies are an important topic for emerging quantum technologies, and highlight the versatility of this new hybrid platform.

quant-ph↗

arXiv2022

Acoustic radiation from a superconducting qubit: From spontaneous emission to Rabi oscillations

Acoustic spontaneous emission into bulk dielectrics can be a strong source of decoherence in quantum devices, especially when a qubit is in the presence of piezoelectric materials. We study the dynamics of a qubit coupled to an acoustic resonator by a piezoelectric film. By varying the surface topography of the resonator from rough to polished to shaped, we explore the crossover from fast decay of an excited qubit to quantum-coherent coupling between the qubit and an isolated phonon mode. Our experimental approach may be used for precision measurements of crystalline vibrations, the design of quantum memories, and the study of electro-mechanical contributions to dielectric loss.

quant-ph↗

arXiv2018

Creation and control of multi-phonon Fock states in a bulk acoustic wave resonator

Quantum states of mechanical motion can be important resources for quantum information, metrology, and studies of fundamental physics. Recent demonstrations of superconducting qubits coupled to acoustic resonators have opened up the possibility of performing quantum operations on macroscopic motional modes, which can act as long-lived quantum memories or transducers. In addition, they can potentially be used to test for novel decoherence mechanisms in macroscopic objects and other modifications to standard quantum theory. Many of these applications call for the ability to create and characterize complex quantum states, putting demanding requirements on the speed of quantum operations and the coherence of the mechanical mode. In this work, we demonstrate the controlled generation of multi-phonon Fock states in a macroscopic bulk-acoustic wave resonator. We also perform Wigner tomography and state reconstruction to highlight the quantum nature of the prepared states. These demonstrations are made possible by the long coherence times of our acoustic resonator and our ability to selectively couple to individual phonon modes. Our work shows that circuit quantum acousto-dynamics (circuit QAD) enables sophisticated quantum control of macroscopic mechanical objects and opens the door to using acoustic modes as novel quantum resources.

quant-ph↗