arXiv subjects

Taihao Zhang

Publications and source records attributed to Taihao Zhang.

7 recordsLinked to original sources

arXiv2026

A Hybrid Near-field Indoor Channel Model for THz Bands Based on Surface Scattering Characteristics

Terahertz (THz) communication and extremely large-scale MIMO (XL-MIMO) are essential for achieving ultra-high data rates in future 6G systems. However, at sub-millimeter wavelengths, typical indoor materials exhibit significant roughness that invalidates conventional ideal smooth surface assumptions, while massive array apertures introduce pronounced near-field effects and spatial non-stationarity. To address these challenges, this paper proposes a hybrid near-field channel model utilizing surface scattering characteristics based on distinct measurement campaigns. First, based on typical indoor materials scattering measurements across the 260-400 GHz band, an improved Beckmann-Kirchhoff (B-K) model is developed to accurately characterize surface roughness and diffuse scattering behavior. The model independently analyzes single-bounce (SB) and multi-bounce (MB) clusters by applying deterministic rough surface scattering theory and geometry-statistical approach, respectively. Then, using near-field spatial non-stationarity measurements from a 630-element virtual array in the 330-360 GHz band, a Dual-Gaussian Mixture Model (DMM) and a Negative Binomial (NB) distribution are adopted to describe the lengths and the number of spatial visibility regions (VRs), respectively. Additionally, a Weibull distribution is employed to model the intra-region power fluctuations. Finally, comprehensive XL-MIMO channel evaluations within the same band demonstrate that the proposed model aligns closely with measured results in terms of the spatial cross-correlation function (SCCF), frequency cross-correlation function (FCF), and channel capacity. By reproducing the spatial sparsity of THz band, the proposed model overcomes the limitation of conventional standard models, such as 3GPP 38.901 and WINNER II, in significantly overestimating channel capacity.

eess.SP↗

arXiv2026

Channel Measurements and Characterization with Phase Drift Compensation for Outdoor 330-360 GHz MIMO Communications

In this paper, an outdoor channel measurement campaign at 330-360 GHz employing a 128 * 4 virtual antenna array (VAA)-based multiple-input multiple-output (MIMO) configuration is conducted. The transmitter (Tx) and receiver (Rx) location pairs are classified into line-of-sight (LoS) and obstructed-LoS (OLoS) scenarios to enable a detailed investigation of outdoor terahertz (THz) band channel characteristics. During the measurement process, the stationarity of the outdoor environment is carefully verified, and a linear phase drift (PD) effect is identified. Then, we propose a PD-aware Space-Alternating Generalized Expectation-Maximization (SAGE) algorithm, which significantly improves both delay resolution and channel parameter estimation accuracy. Based on the processed measurement data, we characterize key channel properties, including the power delay profile, path loss, shadow fading, delay spread, angular spread, Rician K-factor, as well as their cumulative distribution functions and correlation characteristics. In addition, near-field effects and MIMO-specific properties, including the spatial non-stationarity and the cluster birth-death property, are analyzed.

eess.SP↗

arXiv2026

A Measurement-Based Parameterization of Physics Reflection Models for Terahertz Communication

The accurate modeling of reflection coefficients is pivotal for developing reliable channel models in emerging terahertz (THz) communications. This study establishes a 300$\sim$400 GHz channel measurement platform to measure the reflection coefficients of various materials. Based on the analysis of measured data, we propose the single-layer interference with an extended-parameterized Lorentz/Drude (SLI-EPLD) reflection coefficient model. In this model, a sub-band modeling strategy is adopted to characterize the variation of reflection coefficients with frequency, while a parameterized mapping approach is employed to ensure the stability of model parameters. Furthermore, the weighted sub-band fitting for trend regression (WF-TREND) algorithm is introduced to achieve precise sub-band parameter fitting. Validation results demonstrate superior performance to existing models across multiple materials. The reflection coefficient model established in this work serves as a critical foundation for channel modeling in 300$\sim$400 GHz for high-THz communication.

eess.SP↗

arXiv2026

Channel Estimation for Beyond Diagonal RIS-Aided Multi-User mmWave Systems

Beyond diagonal reconfigurable intelligent surface (BD-RIS) represents a promising architecture for advancing millimeter-wave (mmWave) communications. However, its intricate inter-element connections invalidate the conventional decoupled mathematical structure, thereby severely complicating cascaded channel estimation. In this paper, we formulate a novel block-Kronecker-structured cascaded channel model for a \textit{group-connected} BD-RIS-aided multi-user (MU) mmWave system equipped with uniform planar arrays (UPAs). By exploiting the cascaded channel sparsity, an efficient three-stage estimation protocol is proposed. Specifically, Stage I acquires the common angles of arrival (AoAs) at the base station (BS) via a discrete Fourier transform (DFT)-based approach. Stage II leverages the block-Kronecker structure alongside orthogonal matching pursuit (OMP) and correlation-based least squares (LS) to extract the complete cascaded channel for a designated typical user. Finally, Stage III utilizes a Hierarchical Block OMP (HBOMP) algorithm to estimate the other users' channels. This structurally reconstructs the common and user-specific components, which fundamentally reduces the computational complexity and substantially reduces the pilot overhead. Numerical simulations verify that the proposed protocol yields improved channel estimation accuracy while maintaining a relatively low pilot overhead.

eess.SP↗

arXiv2026

Near-field Channel Estimation for XL-RIS-aided mmWave MIMO Systems

Extremely large-scale reconfigurable intelligent surfaces (XL-RISs) have emerged as a promising technology for millimeter-wave (mmWave) communications. However, the exceedingly large aperture of XL-RISs renders the RIS-user links likely to operate in the near-field region, where the conventional planar-wave assumption and angular-domain sparse representation become invalid, thus making channel estimation significantly more challenging. In this paper, we investigate cascaded channel estimation for an XL-RIS-aided multi-user multiple-input multiple-output (MU-MIMO) system, in which the BS-RIS channel is modeled in the far field, while the RIS-user channels exhibit near-field spherical-wave characteristics. To tackle the resulting hybrid-field estimation problem, we propose a low-overhead two-stage channel estimation scheme by jointly exploiting the common BS-RIS link shared by all users and the polar-domain sparsity of the RIS-user channels. Specifically, the multi-antenna users are firstly decomposed into multiple virtual single-antenna users, based on which the common BS-RIS parameters are extracted from a typical virtual user and the RIS-user channels are initialized via compensated polar-domain sparse recovery. Then, an alternating least-squares refinement procedure is developed to jointly improve the common BS-RIS operator and the user-specific RIS-side channels. Simulation results show that the proposed scheme achieves competitive channel estimation performance with substantially reduced pilot overhead compared with the existing near-field benchmarks.

cs.IT↗

arXiv2025

Channel Estimation for RIS-Aided MU-MIMO mmWave Systems with Direct Channel Links

In this paper, we propose a three-stage unified channel estimation strategy for reconfigurable intelligent surface (RIS)-aided multi-user (MU) multiple-input multiple-output (MIMO) millimeter wave (mmWave) systems with the existence of the direct channels, where the base station (BS), the users and the RIS are equipped with uniform planar array (UPA). The effectiveness of the developed three-stage strategy stems from the careful design of both the pilot signal sequence of the users and the vectors of RIS. Specifically, in Stage I, the cascaded channel components are eliminated by configuring the RIS phase shift vectors with a {\pi} difference to estimate the direct channels for all users. The orthogonal subspace projection is employed in Stage II to obtain equivalent signal matrices, enabling the estimation of angles of departure (AoDs) of the user-RIS channel for all users. In Stage III, we combine the signals of the time slots with the same pilots and project obtained measurement matrix to the orthogonal complement space of the component consisting of the portion of the direct channel, which removes the direct components and thus prevents error propagation from the direct channels to the cascaded channels. Then, we estimate the angles of arrival (AoAs) of the RIS-BS channel and remaining parameters of the cascaded channel for all users by exploiting the sparsity and correlation in the obtained equivalent matrices. Simulation results demonstrate that the proposed method yields better estimation performance than the existing methods.

eess.SP↗

arXiv2025

Theoretical and Empirical Study of Spatial Power Focusing Effect for Sparse Arrays at Terahertz Band

This work investigates the spatial power focusing effect for large-scale sparse arrays at terahertz (THz) band, combining theoretical analysis with experimental validation. Specifically, based on a Green's function channel model, we analyze the power distribution along the $z$-axis, deriving a closed-form expression to characterize the focusing effect. Furthermore, the factors influencing the focusing effect, including phase noise and positional deviations, are theoretically analyzed and numerically simulated. Finally, a 300 GHz measurement platform based on a vector network analyzer (VNA) is constructed for experimental validation. The measurement results demonstrate close consistence with theoretical simulation results, confirming the spatial power focusing effect for sparse arrays.

eess.SP↗