arXiv subjects

Taixia Shi

Publications and source records attributed to Taixia Shi.

At least 19 recordsLinked to original sources

arXiv2026

Two-step high-accuracy microwave frequency measurement and time-frequency analysis based on optical frequency combs

Broadband microwave frequency measurement and time-frequency analysis are crucial for applications such as electronic warfare. However, when it comes to ultra wideband signal analysis, traditional electronic methods have high analysis accuracy, but intrinsic electronic bottlenecks limit their real-time analysis. Here, we propose and experimentally demonstrate a two-step microwave frequency measurement and time-frequency analysis method based on optical frequency combs. The system first performs coarse frequency localization over the 0-40 GHz range using stimulated-Brillouin-scattering-assisted frequency-to-time mapping (FTTM) and dual-comb channelized reception. The dual-comb is then reapplied for downconverting the signal under test, followed by digital signal processing to achieve high-accuracy unambiguous frequency extraction. Experimental results show that the system achieves mean single-tone frequency measurement errors of less than 10 kHz over 0-40 GHz. We further experimentally measure multi-tone, linearly frequency-modulated, and V-shaped frequency-modulated signals, demonstrating the proposed method's capability for analyzing complex signals.

physics.optics↗

arXiv2026

Analog Time-Frequency Analysis and Frequency Measurement of Ultra-Wideband Microwave Signals via Dual-Comb Channelization

Frequency-to-time mapping (FTTM)-based photonics-assisted spectrum sensing enables wideband spectrum monitoring for applications such as cognitive radio and electronic warfare. However, FTTM-based photonics-assisted spectrum sensing approaches involve trade-offs among analysis bandwidth, temporal resolution, and frequency resolution. Although channelization has been introduced to alleviate these trade-offs, the limited number of available channels in previously reported systems constrains further improvements in overall performance. Here, we propose a photonics-assisted dual-comb channelization architecture for broadband frequency measurement and time-frequency analysis. The system employs a stepped-frequency pump based on stimulated Brillouin scattering (SBS) to generate an optical filter comb and adopts a single-laser design for the pump, probe, and reference paths to enhance frequency stability while reducing system complexity. Experimental results show a 48-GHz analysis bandwidth in the 16-channel configuration and 52 GHz in the 20-channel configuration, together with microsecond-scale temporal resolution and a frequency resolution better than 80 MHz. The proposed architecture therefore offers a practical and reconfigurable solution for real-time wideband spectrum sensing.

physics.optics↗

arXiv2026

Broadband microwave time-frequency analysis via stabilized period-one oscillation and recirculating frequency shifting with shared fiber loop

To address the need for time-frequency analysis (TFA) of broadband microwave signals and to overcome the reliance of existing schemes on large-bandwidth swept microwave sources, we propose a broadband microwave signal TFA approach based on stabilized period-one (P1) oscillation and recirculating frequency shifting (RFS). By employing a feedback loop, a stable swept optical signal is generated from the stabilized P1 oscillation of a semiconductor laser, and its sweep bandwidth is further extended by an RFS loop to achieve multi-fold bandwidth expansion. For system compactness, the feedback loop and RFS loop share a common long fiber. The combined operation produces a broadband swept optical signal, which, through stimulated Brillouin scattering-based frequency-to-time mapping, enables TFA and frequency measurement of broadband microwave signals. Experimental results demonstrate an instantaneous analysis bandwidth of up to 57 GHz, a frequency resolution of 60 MHz, and a maximum mean absolute frequency measurement error of 38.16 MHz.

physics.optics↗

arXiv2026

Microwave photonic radar jamming and target detection integration based on advanced waveform editing, forwarding, and self-squaring reception

The integrated radar and jamming (IRAJ) system provides a promising solution that meets the demands for miniaturization, integration, and multifunctionality in complex warfare environments. However, traditional electronic-domain IRAJ systems face limitations in operating frequency and bandwidth. In this paper, we propose and experimentally demonstrate a microwave photonic IRAJ system based on pseudo-random binary phase modulation and segmented frequency shifting. By modulating pseudo-random binary coding sequence and frequency-shifting signals onto linearly frequency-modulated (LFM) pulses, an IRAJ waveform is generated to achieve noise-like jamming against the adversary radar. To overcome the random {\pi}-phase jumps introduced by pseudo-random binary modulation in the de-chirped signal, a time-domain squaring operation is implemented during de-chirped reception, restoring the radar detection ability of our system and enabling accurate target sensing without prior knowledge of the coding sequence. Experimental results demonstrate that the system can generate IRAJ waveforms with a bandwidth of up to 4 GHz, covering both 10-28 GHz. The proposed system achieves effective jamming against adversary radars employing either de-chirped reception or pulse compression, with the generated jamming results exhibiting an irregular and random distribution of false targets. Meanwhile, the system maintains radar performance with a ranging error of around 5 cm and a radial velocity measurement error below 4 cm/s.

physics.optics↗

arXiv2026

Dynamic Dispersion Accumulation in Fiber Loops for Realizing Record-High Frequency Resolution or Ultra-Low Signal Sampling Rate in Dispersion-Based Photonics-Assisted Wideband Microwave Measurement Systems

Dispersion-based photonics-assisted microwave measurement systems provide immense potential for real-time analysis of wideband and dynamic signals. However, they face two critical challenges: a difficulty in achieving high frequency resolution over a wideband analysis bandwidth, and a reliance on large-bandwidth-and-high-sampling-rate oscilloscopes to capture the resulting ultra-narrow pulses. We introduce a dynamic dispersion accumulation technique to overcome these limitations. By circulating the optical signal in fiber loops containing a dispersion-compensating fiber, we achieve a high accumulated dispersion of -215700 ps/nm. This high dispersion relaxes the required chirp rate of the chirped optical signal, enabling two distinct advantages: When the analysis bandwidth is fixed, a lower chirp rate enables a longer temporal period, yielding a record-high frequency resolution of 27.9 MHz; When the temporal period is fixed, a lower chirp rate enables a smaller bandwidth, generating a wider pulse and thus relaxing pulse sampling requirements at the expense of analysis bandwidth. This sacrifice in analysis bandwidth can be compensated by a duty-cycle-enabling technique, which holds the potential to extend the analysis bandwidth beyond 100 GHz. This work breaks the performance and hardware limitations in dispersion-based systems, paving the way for high frequency resolution, wideband microwave measurement systems that are both real-time and cost-effective.

physics.optics↗

arXiv2025

Broadband tunable microwave photonic radar for simultaneous detection of human respiration, heartbeat, and speech with deep learning-based speech recognition

Multimodal vital sign monitoring and speech detection hold significant importance in medical health, public safety, and other fields. This study proposes a broadband tunable microwave photonic radar system that can simultaneously monitor respiration, heartbeat, and speech. The system works by generating broadband radar signals to detect subtle skin displacements caused by these physiological activities. It then utilizes phase variations in radar echo signals to extract and reconstruct the corresponding physiological signals. In order to enhance the processing capability for speech signals, a convolutional neural network with a dual-channel feature fusion model is incorporated, enabling high-precision speech recognition. In addition, the system's frequency-tunable characteristic allows it to flexibly switch frequency bands to adapt to different working environments, greatly improving its practicality and environmental adaptability. In concept-verification experiments, speech signals were reconstructed and recognized in the Ku, K, and Ka bands, achieving recognition accuracies of 97.20%, 98.07%, and 97.43%, respectively. The system's capability to detect multimodal vital signs was also thoroughly validated using a respiratory and heartbeat simulator. During a 20-second monitoring period, while accurately reconstructing speech, the maximum average error counts for respiratory and heartbeat monitoring were 0.39 and 0.87, respectively, proving its reliability and effectiveness in multimodal vital sign monitoring.

physics.optics↗

arXiv2025

Advanced microwave photonic waveform editing: enabling the evolution of radar systems into joint radar and spectrum sensing systems

In response to the urgent demand for the development of future radar application platforms from single radar functionality towards integrated multi-functional systems, we show an advanced microwave photonic waveform editing method that enables the editing of arbitrary radar waveforms, equipping them with the capability to perform spectrum sensing. This, in turn, expands single-function radar systems into joint radar and spectrum sensing systems. We theoretically define and calculate the accumulation function of an arbitrary waveform after passing through a specific dispersive medium, and utilize this accumulation function to further design a corresponding binary sequence for editing the waveform. After editing, the accumulation function of the edited waveform approximates that of a linearly frequency-modulated signal matching the specific dispersive medium. Thus, the edited waveform can be compressed into a narrow pulse after passing through the dispersive medium, realizing the frequency-to-time mapping for achieving frequency measurement or time-frequency analysis. The concept is verified by a simulation and an experiment. Using a dispersion compensating fiber with a total dispersion of -6817 ps/nm, arbitrary waveforms, including a 7-bit Barker phase-coded waveform, a linearly frequency-modulated waveform, a nonlinearly frequency-modulated waveform, and a waveform with an "E" time-frequency diagram, are edited and further used for microwave frequency measurement and time-frequency analysis in an ultra-wide bandwidth of 36.8 GHz. The temporal resolution and frequency resolution are 2 ns and 0.86 GHz, respectively.

physics.optics↗

arXiv2024

Dual-functional microwave photonic system for concurrent radar and secure communication via radar signal masking

Integrating functions such as radar and communication into a single system is of great significance for the miniaturization and functional integration of future electronic warfare and 6G systems. Here, we show a dual-functional microwave photonic system for concurrent radar and secure communication. The scheme utilizes microwave photonic frequency multiplying and frequency conversion techniques to shift both the intermediate frequency radar and communication signals to the same frequency band, enabling radar and communication operations at the same time and frequency. The high-power radar signal is also used to mask the communication signal, increasing the difficulty of signal interception and thus enhancing security. By employing de-chirping at the radar receiver and self-interference cancelation at the communication receiver, the radar function can be implemented and the communication signal can also be correctly demodulated after removing the radar masking. An experiment is performed. A 0.3-GHz bandwidth linearly frequency-modulated signal is quadrupled and superimposed with two up-converted 0.5-Gbaud orthogonal frequency-division multiplexing signals. A communication data rate of 2 Gbit/s, a radar ranging measurement error of less than $\pm$ 0.3 cm, and a radar inverse synthetic aperture radar imaging resolution of 12.5$\times$10.2 cm are achieved.

physics.optics↗

arXiv2024

Microwave photonic frequency measurement and time-frequency analysis: Unlocking bandwidths over hundreds of GHz with a 10-nanosecond temporal resolution

Fast and broadband spectrum sensing is an essential component in cognitive radio systems, intelligent transportation systems, electronic warfare systems, etc. However, traditional electronic-based solutions have a trade-off among the analysis bandwidth, temporal resolution, and real-time performance. In comparison, microwave photonic solutions can overcome the trade-off at the cost of frequency accuracy and resolution. Nevertheless, the reported microwave photonic solutions suffer from a very poor frequency resolution and impose extremely high requirements on hardware when the analysis bandwidth is close to or greater than 100 GHz. Here, we show a microwave photonic frequency measurement and time-frequency analysis method, which is implemented by dispersion-based frequency-to-time mapping and assisted by a specially designed V-shape linearly frequency-modulated signal and a duty-cycle-enabling technique. Compared with the reported microwave photonic solutions, the hardware requirements are greatly reduced when achieving similar performance conditions. Using a total dispersion of -6817 ps/nm and a V-shape linearly frequency-modulated signal with a bandwidth of 31.6 GHz and a duty cycle of 1/4, we achieve an ambiguity-free analysis bandwidth of 252.8 GHz, a corresponding temporal resolution of 13.75 ns and a frequency resolution of 1.1 GHz. The temporal resolution can be improved to 6.875 ns when the duty cycle is changed to 1/2, while the analysis bandwidth in this case is 126.4 GHz.

physics.optics↗

arXiv2024

Physical encryption and decryption for secure data transmission in optical networks leveraging the temporal Talbot effect and microwave photonics

A novel microwave photonic scheme for secure data transmission in optical networks is proposed. The security of the scheme is guaranteed by physical encryption and decryption via the temporal Talbot effect in dispersive mediums. First, the original data is randomized in the digital domain by performing an exclusive OR operation using a random matrix. Subsequently, a time-varying multi-tone electrical signal, which represents the randomized data matrix, is modulated onto an optical carrier. The optical signal after modulation is then phase-modulated by a temporal Talbot array illuminator (TAI) signal, and the optical signal after discrete quadratic phase modulation will lose its original appearance in the frequency domain and be further dispersed in the first dispersive medium. Due to the dispersion that does not match the TAI signal exactly, the waveform after the first dispersive medium is a noise-like signal. Hence, the physical encryption of the original data is successfully achieved. As the optical signal passes a second dispersive medium that makes the total dispersion match the TAI signal, the temporal waveform of the noise-like signal after photodetection is transformed into pulses. "1" and "0" in the randomized data matrix are represented through the presence and absence of pulses, and the physical decryption is achieved. By further processing the recovered data matrix using the random matrix, the original data can be recovered. The physical layer security of the proposed scheme and its fiber transmission capability are demonstrated. 8-Gbit/s data is transmitted, encrypted, and decrypted using two dispersive mediums and an optical fiber of 10 to 200 km, and error-free transmission is achieved. Many factors that affect the encryption, decryption, and transmission performance of the system have been analyzed.

physics.optics↗

arXiv2024

A microwave photonic prototype for concurrent radar detection and spectrum sensing over an 8 to 40 GHz bandwidth

In this work, a microwave photonic prototype for concurrent radar detection and spectrum sensing is proposed, designed, built, and investigated. A direct digital synthesizer and an analog electronic circuit are integrated to generate an intermediate frequency (IF) linearly frequency-modulated (LFM) signal with a tunable center frequency from 2.5 to 9.5 GHz and an instantaneous bandwidth of 1 GHz. The IF LFM signal is converted to the optical domain via an intensity modulator and then filtered by a fiber Bragg grating (FBG) to generate only two 2nd-order optical LFM sidebands. In radar detection, the two optical LFM sidebands beat with each other to generate a frequency-and-bandwidth-quadrupled LFM signal, which is used for ranging, radial velocity measurement, and imaging. By changing the center frequency of the IF LFM signal, the radar function can be operated within 8 to 40 GHz. In spectrum sensing, one 2nd-order optical LFM sideband is selected by another FBG, which then works in conjunction with the stimulated Brillouin scattering gain spectrum to map the frequency of the signal under test to time with an instantaneous measurement bandwidth of 2 GHz. By using a frequency shift module to adjust the pump frequency, the frequency measurement range can be adjusted from 0 to 40 GHz. The prototype is comprehensively studied and tested, which is capable of achieving a range resolution of 3.75 cm, a range error of less than $\pm$ 2 cm, a radial velocity error within $\pm$ 1 cm/s, delivering clear imaging of multiple small targets, and maintaining a frequency measurement error of less than $\pm$ 7 MHz and a frequency resolution of better than 20 MHz.

physics.optics↗

arXiv2024

Seamless Integration and Implementation of Distributed Contact and Contactless Vital Sign Monitoring

Real-time vital sign monitoring is gaining immense significance not only in the medical field but also in personal health management. Facing the needs of different application scenarios of the smart and healthy city in the future, the low-cost, large-scale, scalable, and distributed vital sign monitoring system is of great significance. In this work, a seamlessly integrated contact and contactless vital sign monitoring system, which can simultaneously implement respiration and heartbeat monitoring, is proposed. In contact vital sign monitoring, the chest wall movement due to respiration and heartbeat is translated into changes in the optical output intensity of a fiber Bragg grating (FBG). The FBG is also an important part of radar signal generation for contactless vital sign monitoring, in which the chest wall movement is translated into phase changes of the radar de-chirped signal. By analyzing the intensity of the FBG output and phase of the radar de-chirped signal, real-time respiration and heartbeat monitoring are realized. In addition, due to the distributed structure of the system and its good integration with the wavelength-division multiplexing optical network, it can be massively scaled by employing more wavelengths. A proof-of-concept experiment is carried out. Contact and contactless respiration and heartbeat monitoring of three people are simultaneously realized. During a monitoring time of 60 s, the maximum absolute measurement errors of respiration and heartbeat rates are 1.6 respirations per minute and 2.3 beats per minute, respectively. The measurement error does not have an obvious change even when the monitoring time is decreased to 5 s.

eess.SY↗

arXiv2024

Microwave photonic short-time Fourier transform based on stabilized period-one nonlinear laser dynamics and stimulated Brillouin scattering

A microwave photonic short-time Fourier transform (STFT) system based on stabilized period-one (P1) nonlinear laser dynamics and stimulated Brillouin scattering (SBS) is proposed. By using an optoelectronic feedback loop, the frequency-sweep optical signal generated by the P1 nonlinear laser dynamics is stabilized, which is further used in conjunction with an optical bandpass filter implemented by stimulated Brillouin scattering (SBS) to achieve the frequency-to-time mapping of microwave signals and the final STFT. By comparing the experimental results with and without optoelectronic feedback, it is found that the time-frequency diagram of the signal under test (SUT) obtained by STFT is clearer and more regular, and the frequency of the SUT measured in each frequency-sweep period is more accurate. The mean absolute error is reduced by 50% under the optimal filter bandwidth.

physics.optics↗

arXiv2024

Seamlessly merging radar ranging/imaging, wireless communications, and spectrum sensing, for 6G empowered by microwave photonics

Integration of radar, wireless communications, and spectrum sensing is being investigated for 6G with an increased spectral efficiency. Microwave photonics (MWP), a technique that combines microwave engineering and photonic technology to take advantage of the wide bandwidth offered by photonics for microwave signal generation and processing is considered an effective solution for the implementation of the integration. In this paper, an MWP-assisted joint radar, wireless communications, and spectrum sensing (JRCSS) system that enables precise perception of the surrounding physical and electromagnetic environments while maintaining high-speed data communication is proposed and demonstrated. Communication signals and frequency-sweep signals are merged in the optical domain to achieve high-speed radar ranging and imaging, high-data-rate wireless communications, and wideband spectrum sensing. In an experimental demonstration, a JRCSS system supporting radar ranging with a measurement error within $\pm$ 4 cm, two-dimensional imaging with a resolution of 25 $\times$ 24.7 mm, wireless communications with a data rate of 2 Gbaud, and spectrum sensing with a frequency measurement error within $\pm$ 10 MHz in a 6-GHz bandwidth, is demonstrated.

eess.SP↗

arXiv2023

Channelized analog microwave short-time Fourier transform in the optical domain with improved measurement performance

In this article, analog microwave short-time Fourier transform (STFT) with improved measurement performance is implemented in the optical domain by employing stimulated Brillouin scattering (SBS) and channelization. By jointly using three optical frequency combs and filter- and SBS-based frequency-to-time mapping (FTTM), the time-frequency information of the signal under test (SUT) in different frequency intervals is measured in different channels. Then, by using the channel label introduced through subcarriers after photodetection, the obtained low-speed electrical pulses in different channels mixed in the time domain are distinguished and the time-frequency information of the SUT in different channels is respectively obtained and spliced to implement the STFT. For the first time, channelization measurement technology is introduced in the STFT system based on frequency sweeping and FTTM, greatly reducing the frequency-sweep range of the required frequency-sweep signal to the analysis bandwidth divided by the number of channels. In addition, channelization can also be used to improve the time and frequency resolution of the STFT system. A proof-of-concept experiment is performed. 12-GHz and 10-GHz analysis bandwidth is implemented by using a 4-GHz frequency-sweep signal and 3 channels and a 2-GHz frequency-sweep signal and 5 channels. Measurement performance improvement is also demonstrated.

eess.SP↗

arXiv2022

Photonics-assisted analog wideband self-interference cancellation for in-band full-duplex MIMO systems with adaptive digital amplitude and delay pre-matching

A photonics-assisted analog wideband RF self-interference (SI) cancellation and frequency downconversion approach for in-band full-duplex (IBFD) multiple-input multiple-output (MIMO) systems with adaptive digital amplitude and delay pre-matching is proposed based on a dual-parallel Mach-Zehnder modulator (DP-MZM). In each MIMO receiving antenna, the received signal, including different SI signals from different transmitting antennas and the signal of interest, is applied to one arm of the upper dual-drive Mach-ehnder modulator (DD-MZM) of the DP-MZM, the reference signal is applied to the other arm of the upper DD-MZM, and the local oscillator signal is applied to the lower DD-MZM. The SI signals are canceled in the optical domain in the upper DD-MZM and the frequency downconversion is achieved after photodetection. To cancel the SI signals, the reference signal is constructed in the digital domain, while the amplitude and delay of the constructed reference are adjusted digitally by upsampling with high accuracy. Experiments are performed when two different SI signals are employed. The genetic algorithm and least-squares algorithm are combined with segmented searching respectively for the SI signal reconstruction and amplitude and delay pre-matching. A cancellation depth of around 20 dB is achieved for the 1-Gbaud 16 quadrature-amplitude modulation orthogonal frequency-division multiplexing signal.

eess.SP↗

arXiv2021

Digital-assisted photonic analog wideband multipath self-interference cancellation

A digital-assisted photonic analog wideband radio-frequency multipath self-interference cancellation (SIC) and frequency downconversion method based on a dual-drive Mach-Zehnder modulator and the recursive least square (RLS) algorithm is proposed and demonstrated for in-band full-duplex systems. Besides the reference for the direct-path self-interference (SI) signal, the RLS algorithm is used to construct another reference for the residual SI signal from the direct path and the SI signals from the reflection paths. The proposed method can solve the performance limitation in the previously reported SIC methods of constructing the multipath SI signal using a single reference caused by the limited dynamic range of the digital-to-analog converter when the direct-path SI signal is much stronger than the sub-weak reflection-path SI signals. An experiment is performed. When the carrier frequency of the multipath SI signal is 10 GHz and the direct-path SI signal is much stronger than the sub-weak multipath SI signal, the cancellation depths of about 26.7 and 26.1 dB are realized with SI baud rates of 0.5 and 1 Gbaud. When the direct-path SI signal and sub-weak multipath SI signal own closer power, the corresponding cancellation depths are 24.7 and 20.8 dB, respectively.

eess.SP↗

arXiv2021

Photonics-based de-chirping and leakage cancellation for frequency-modulated continuous-wave radar system

A photonics-based leakage cancellation and echo signal de-chirping approach for frequency-modulated continuous-wave radar systems is proposed based on a dual-drive Mach-Zehnder modulator (DD-MZM), with its performance evaluated by the radar measurement and imaging. The de-chirp reference signal and the leakage cancellation reference signal are combined and applied to the upper arm of the DD-MZM, while the received signal including the leakage signal and echo signals is applied to the lower arm of the DD-MZM. When the amplitudes and delays of the leakage cancellation reference signal and the leakage signal are precisely matched and the DD-MZM is biased at the minimum transmission point, the leakage signal is canceled in the optical domain. The de-chirped signals are obtained after the leakage-free optical signal is detected in a photodetector. An experiment is performed. The cancellation depth of the de-chirped leakage signal is around 23 dB when the center frequency and bandwidth of the linearly frequency-modulated signal are 11.5 and 2 GHz. The leakage cancellation scheme is used in a radar system. When the leakage cancellation is not employed, the leakage signal will seriously affect the imaging results and distance measurement accuracy of the radar system. When the leakage cancellation is applied, the imaging results of multiple targets can be clearly distinguished, and the error of the distance measurement results is significantly reduced to 10 cm.

eess.SP↗