arXiv subjects

Takaaki Takenaka

Publications and source records attributed to Takaaki Takenaka.

3 recordsLinked to original sources

arXiv2026

A simple method to fabricate Josephson junctions

A minimal method to fabricate Al/AlO$_x$/Al Josephson junctions (JJs) using photolithography and argon etching, before metallization and oxidation, is demonstrated. JJs with areas ranging from 1 to 6 $μ$m$^2$ can be fabricated and, with the appropriate oxidation conditions, the junction resistance can be varied by $\sim$2 orders of magnitude. Transmission electron microscopy reveals the successful fabrication of JJs with few grain boundaries suggesting reduced energy loss from two-level-systems. Superconducting QUantum Interference Devices (SQUIDs) fabricated from this methodology exhibit reduced resistance variation over multiple chips, compared with electron beam lithography, and the devices can sustain repeated thermal cycles to 10 mK with the excellent flux response remaining unchanged. The quantum applications of this technology are demonstrated by embedding a SQUID resonator into a 3D cavity and parametrically amplifying low photon numbers with gains of $\sim$40 dB. This work establishes the simplest approach to fabricating JJs to date, and it could prove pivotal to the widespread utilization of superconducting circuit-based quantum technologies.

quant-ph↗

arXiv2025

Three-Dimensional Niobium Coaxial Cavity with $\sim0.1\,$second Lifetime

We report on the internal quality factor of a three-dimensional niobium quarter-wave coaxial cavity, with mid-temperature annealing, exhibiting $Q_{\rm int} \gtrsim 3\times10^9$ at the single-photon level below 20\,mK, which corresponds to an internal photon lifetime of $τ_{\rm int}\sim90\,\mathrm{ms}$. Moreover, $Q_{\rm int}$ of the mid-temperature annealed cavities remains almost unchanged even after several cooldown cycles and air exposure. These results suggest that stable low-loss niobium oxides might be formed by mid-temperature annealing on the surface of three-dimensional niobium cavity. This surface treatment could be applicable to the fabrication of 2D superconducting circuits and help improve the lifetime of Nb-based superconducting qubits.

quant-ph↗

arXiv2022

Effect of Decoherence for Gate Operations on a Superconducting Bosonic Qubit

High-quality-factor 3D cavities in superconducting circuits are ideal candidates for bosonic logical qubits as their fidelity is limited only by the low photon loss rate. However, the transmon qubits that are used to manipulate bosonic qubits result in the emergence of additional relaxation and dephasing channels. In this work, a numerical study is performed to elucidate the effect of the various loss channels on the performance of logical gates on a bosonic qubit. A gate error model is developed that encapsulates the loss mechanisms for arbitrary gate operations and predicts experimentally achievable gate errors for bosonic qubits. The insights gleaned from this study into loss mechanisms suggest more efficient optimization algorithms that could reduce gate errors on bosonic qubits.

quant-ph↗