arXiv subjects

Takefumi Miyoshi

Publications and source records attributed to Takefumi Miyoshi.

9 recordsLinked to original sources

arXiv2026

Qu-Trefoil: Large-Scale Quantum Circuit Simulator Working on FPGA With SATA Storages

Quantum circuits are fundamental components of quantum computing, and state-vector-based quantum circuit simulation is a widely used technique for tracking qubit behavior throughout circuit evolution. However, simulating a circuit with $n$ qubits requires $2^{n+4}$ bytes of memory, making simulations of more than 40 qubits feasible only on supercomputers. To address this limitation, we propose the Qu-Trefoil, a system designed for large-scale quantum circuit simulations on an FPGA-based platform called Trefoil. Trefoil is a multi-FPGA system connected to eight storage subsystems, each equipped with 32 SATA disks. Qu-Trefoil integrates a suite of HLS-based universal quantum gates, including Clifford gates (Hadamard (H), Pauli-Z (Z), Phase (S), Controlled-NOT (CNOT)), the T gate, and unitary matrix computation, along with HDL-designed modules for system-wide integration. Our extensive evaluation demonstrates the system's robustness and flexibility, covering quantum gate performance, chunk size, disk extensibility, and efficiency across different SATA generations. We successfully simulated quantum circuits with over 43 qubits, which required more than 128 TB of memory, in approximately 3.72 to 13.06 hours on a single storage subsystem equipped with one FPGA. This achievement represents a significant milestone in the advancement of quantum computing simulations. Furthermore, thanks to its unique architecture, Qu-Trefoil is more accessible, flexible, and cost-efficient than other existing simulators for large-scale quantum circuit simulations, making it a viable option for researchers with limited access to supercomputers.

quant-ph↗

arXiv2026

QuBE/Qubex: an integrated hardware-software system for superconducting qubit experiments with broadband control

Achieving high-fidelity operation in large-scale superconducting qubit systems requires not only control hardware with broad frequency coverage, low crosstalk, and tight synchronization but also software that coordinates system configuration, experiment execution, and data analysis. Here we present an integrated qubit-control system that combines broadband microwave hardware with a pulse-level software stack for scalable superconducting qubit experiments. The hardware provides broadband microwave coverage, including an instantaneous span of up to 1.6 GHz from a control output, while the software reduces setup and calibration overhead through automated configuration and built-in experiment workflows. We validate the system on a 64-qubit fixed-frequency transmon chip through full-chip frequency identification and representative demonstrations, including multi-unit far-detuned cross-resonance calibration and benchmarking that yields a measured two-qubit gate fidelity of 98.34%, and multilevel readout beyond the computational subspace. By disclosing the hardware architecture and releasing the software stack as open source, this work provides an inspectable hardware-software foundation for scalable superconducting qubit control experiments.

quant-ph↗

arXiv2026

Cryogenic Time-Division-Multiplexed Voltage Control for Scalable Trapped-Ion Quantum Processors

Trapped-ion quantum computers based on the quantum charge-coupled device architecture require on the order of ten trap electrodes per qubit, making the number of vacuum feedthroughs a bottleneck at the system scale. Time-division multiplexed (TDM)-based voltage control for trap electrodes provides a natural route to alleviate this constraint. However, previous studies have been limited to architectural proposals for static trap-potential compensation and room-temperature demonstrations of dynamic-electrode control, leaving cryogenic operation of TDM-based voltage control for static and dynamic electrodes experimentally unexplored. In this study, we develop and cryogenically validate TDM-based voltage control schemes for two distinct electrode classes. For static electrodes used in trap-potential compensation, we implement a 32-channel demultiplexed system operating at approximately 27~K, achieving an effective voltage update rate of 37.5~kHz with an output range of $\pm10~\mathrm{V}$ per channel. For dynamic electrodes used in ion operations, such as shuttling, we implement a four-channel demultiplexed system operating at approximately 14~K, achieving an effective voltage update rate of 1~MHz with a comparable output range. These results establish TDM-based voltage control as a practical approach for both electrode classes, providing a path for mitigating the vacuum feedthrough bottleneck in scalable trapped-ion quantum processors.

quant-ph↗

arXiv2026

Microwave Output Stabilization of a Qubit Controller via Device-Level Temperature Control

We present the design and performance of QuEL-1 SE, which is a multichannel qubit controller developed for superconducting qubits. The system incorporates the active thermal stabilization of critical analog integrated circuits, such as phase-locked loops, amplifiers, and mixers, to suppress the long-term amplitude and phase drift. To evaluate the amplitude and phase stability, we simultaneously monitor 15 microwave output channels over 24 h using a common analog-to-digital converter. Across the channels, the normalized amplitude exhibits standard deviations of 0.09\%--0.22\% (mean: 0.15\%), and the phase deviations are 0.35$^\circ$--0.44$^\circ$ (mean: 0.39$^\circ$). We further assess the impact of these deviations on quantum gate operations by estimating the average fidelity of an $X_{π/2}$ gate under the coherent errors corresponding to the deviations. The resulting gate infidelities are $2\times 10^{-6}$ for amplitude errors and $2\times 10^{-5}$ for phase errors, which are significantly lower than typical fault-tolerance thresholds such as those of the surface code. These results demonstrate that the amplitude and phase stability of QuEL-1 SE enables reliable long-duration quantum operations, thus highlighting its utility as a scalable control platform for superconducting and other qubit modalities.

quant-ph↗

arXiv2025

Trapping an Atomic Ion using Time-Division Multiplexed Digital-to-Analog Converters

Independent control of numerous electrodes in quantum charge-coupled device architectures presents a significant challenge for wiring and hardware scalability. To address this issue, we demonstrate a voltage control method based on time-division multiplexing (TDM). This approach utilizes a single high-update-rate digital-to-analog converter (DAC) to sequentially generate control signals for multiple electrodes, thereby reducing both the number of required DACs and associated wiring. We experimentally validate this concept by developing a 10-channel system that operates with only two DACs. The developed TDM-based voltage control system is applied to a surface-electrode trap, where we successfully trap a single $^{40}\mathrm{Ca}^+$ ion and demonstrate a simple ion transport primitive. This approach offers a resource-efficient and scalable solution for advanced quantum computing systems based on trapped ions.

quant-ph↗

arXiv2025

Selective Excitation of Superconducting Qubits with a Shared Control Line through Pulse Shaping

In conventional architectures of superconducting quantum computers, each qubit is connected to its own control line, leading to a commensurate increase in the number of microwave lines as the system scales. Frequency-multiplexed qubit control addresses this problem by enabling multiple qubits to share a single microwave line. However, it can cause unwanted excitation of non-target qubits, especially when the detuning between qubits is smaller than the pulse bandwidth. Here, we propose a selective-excitation-pulse (SEP) technique that suppresses unwanted excitations by shaping a drive pulse to create null points at non-target qubit frequencies. In a proof-of-concept experiment with three fixed-frequency transmon qubits, we demonstrate that the SEP technique achieves single-qubit gate fidelities comparable to those obtained with conventional Gaussian pulses while effectively suppressing unwanted excitations in non-target qubits. These results highlight the SEP technique as a promising tool for enhancing frequency-multiplexed qubit control.

quant-ph↗

arXiv2025

High fidelity flopping-mode single spin operation with tuning inter-dot orbital levels

Fast spin manipulation and long spin coherence time in quantum dots are essential features for high fidelity semiconductor spin qubits. However, generally it has not been well established how to optimize these two properties simultaneously, because these two properties are usually not independent from each other. Therefore, the scheme for high fidelity operation by simultaneous tuning Rabi frequency and coherence time, which does not rely on the material-dependent strong spin-orbit interaction and the local magnetic field gradient limiting their scalability, are strongly demanded. Here, we demonstrate an approach to achieve high-fidelity spin control by tuning inter-dot spin-orbit coupling in a GaAs triple quantum dot (TQD), where the third dot provides precise control over orbital energy levels. In an electrically stable charge state with optimized tunnel coupling, we achieve Rabi frequencies exceeding 100 MHz while maintaining coherence through proper tuning of the inter-dot orbital levels of the TQD. By implementing a machine learning-based feedback control that efficiently estimates qubit frequency using past measurement data, we characterize and mitigate the impact of low frequency noise on qubit coherence with minimal measurement overhead. Finally, we demonstrate a $π$/2 gate fidelity of 99.7\% with a gate time of 4 ns through randomized benchmarking, even in a GaAs quantum dot device where electron spin coherence is typically limited by strong hyperfine interaction with nuclear spins. Our approach provides a scalable strategy for high-fidelity spin control in semiconductor quantum dot arrays by utilizing device-specific parameters rather than relying on material properties or external field gradients.

cond-mat.mes-hall↗

arXiv2025

Multiplexed Control at Scale for Electrode Arrays in Trapped-Ion Quantum Processors

The scaling up of trapped-ion quantum processors based on the quantum charge-coupled device (QCCD) architecture is difficult owing to the extensive electronics and high-density wiring required to control numerous trap electrodes. In conventional QCCD architectures, each trap electrode is controlled via a dedicated digital-to-analog converter (DAC). The conventional approach places an overwhelming demand on electronic resources and wiring complexity. This is because the number of trap electrodes typically exceeds the number of trapped-ion qubits. This study proposes a method that leverages a high-speed DAC to generate time-division multiplexed signals to control a large-scale QCCD trapped-ion quantum processor. The proposed method replaces conventional DACs with a single high-speed DAC that generates the complete voltage waveforms required to control the trap electrodes, thereby significantly reducing the wiring complexity and overall resource requirements. Based on realistic parameters and commercially available electronics, our analysis demonstrates that a QCCD trapped-ion quantum computer with 10,000 trap electrodes can be controlled using only 13 field-programmable gate arrays and 104 high-speed DACs. This is in stark contrast to the 10,000 dedicated DACs required by conventional control methods. Consequently, employing this approach, we developed a proof-of-concept electronic system and evaluated its analog output performance.

quant-ph↗

arXiv2024

SPulseGen: Succinct pulse generator architecture maximizing gate fidelity for superconducting quantum computers

This paper proposes a cost-effective architecture for an RF pulse generator for superconducting qubits. Most existing works use arbitrary waveform generators (AWGs) that require both a large amount of high-bandwidth memories and high-performance analog circuits to achieve the highest gate fidelity with an optimized RF pulse waveform. The proposed pulse generator architecture significantly simplifies both the generator circuit and the waveform of the RF pulse to a cost-aware square pulses. This architecture eliminates the requirement for power- and cost-intensive AWG, a major obstacle in realizing scalable quantum computers. Additionally, this paper proposes a process to optimize pulse waveforms to maximize fidelity of gate operations for single and multiple qubits. Quantum dynamics simulation of transmon qubits, wherein the state of system evolves with time, demonstrates that our pulse generator can achieve practically the same gate fidelity as ideal RF pulses, while substantially reducing the performance requirements of memory and analog circuits.

quant-ph↗