arXiv subjects

Taku Takeuchi

Publications and source records attributed to Taku Takeuchi.

At least 19 recordsLinked to original sources

arXiv2021

Photoevaporative Dispersal of Protoplanetary Disks around Evolving Intermediate-mass Stars

We aim to understand the effect of stellar evolution on the evolution of protoplanetary disks. We focus in particular on the disk evolution around intermediate-mass (IM) stars, which evolve more rapidly than low-mass ones. We numerically solve the long-term evolution of disks around 0.5-5 solar-mass stars considering viscous accretion and photoevaporation (PE) driven by stellar far-ultraviolet (FUV), extreme-ultraviolet (EUV), and X-ray emission. We also take stellar evolution into account and consider the time evolution of the PE rate. We find that the FUV, EUV, and X-ray luminosities of IM stars evolve by orders of magnitude within a few Myr along with the time evolution of stellar structure, stellar effective temperature, or accretion rate. Therefore, the PE rate also evolves with time by orders of magnitude, and we conclude that stellar evolution is crucial for the disk evolution around IM stars.

astro-ph.EP↗

arXiv2018

Revisiting the pre-main-sequence evolution of stars II. Consequences of planet formation on stellar surface composition

We want to investigate how planet formation is imprinted on stellar surface composition using up-to-date stellar evolution models. We simulate the evolution of pre-main-sequence stars as a function of the efficiency of heat injection during accretion, the deuterium mass fraction, and the stellar mass. For simplicity, we assume that planet formation leads to the late accretion of zero-metallicity gas, diluting the surface stellar composition as a function of the mass of the stellar outer convective zone. We adopt $150\,{\mathrm{M}_\oplus}(M_\star/\mathrm{M}_\odot)(Z/\mathrm{Z}_\odot)$ as an uncertain but plausible estimate of the mass of heavy elements that is not accreted by stars with giant planets, including our Sun. By combining our stellar evolution models to these estimates, we evaluate the consequences of planet formation on stellar surface composition. We show that after the first $\sim0.1$ Myr, the evolution of the convective zone follows classical evolutionary tracks within a factor of two in age. We find that planet formation should lead to a scatter in stellar surface composition that is larger for high-mass stars than for low-mass stars. We predict a spread in [Fe/H] of approximately $0.02$ dex for stars with $T_\mathrm{eff}\sim 5500\,$K, marginally compatible with differences in metallicities observed in some binary stars with planets. Stars with $T_\mathrm{eff}\geq 7000\,$K may show much larger [Fe/H] deficits, by 0.6 dex or more, compatible with the existence of refractory-poor $λ$ Boo stars. We also find that planet formation may explain the lack of refractory elements seen in the Sun as compared to solar twins, but only if the ice-to-rock ratio in the solar-system planets is less than $\approx0.4$ and planet formation began less than $\approx1.3$ Myr after the beginning of the formation of the Sun. (abbreviated)

astro-ph.SR↗

arXiv2017

Revisiting the pre-main-sequence evolution of stars I. Importance of accretion efficiency and deuterium abundance

Recent theoretical work has shown that the pre-main-sequence (PMS) evolution of stars is much more complex than previously envisioned. Instead of the traditional steady, one-dimensional solution, accretion may be episodic and not necessarily symmetrical, thereby affecting the energy deposited inside the star and its interior structure. Given this new framework, we want to understand what controls the evolution of accreting stars. We use the MESA stellar evolution code with various sets of conditions. In particular, we account for the (unknown) efficiency of accretion in burying gravitational energy into the protostar through a parameter, $ξ$, and we vary the amount of deuterium present. We confirm the findings of previous works that the evolution changes significantly with the amount of energy that is lost during accretion. We find that deuterium burning also regulates the PMS evolution. In the low-entropy accretion scenario, the evolutionary tracks in the H-R diagram are significantly different from the classical tracks and are sensitive to the deuterium content. A comparison of theoretical evolutionary tracks and observations allows us to exclude some cold accretion models ($ξ\sim 0$) with low deuterium abundances. We confirm that the luminosity spread seen in clusters can be explained by models with a somewhat inefficient injection of accretion heat. The resulting evolutionary tracks then become sensitive to the accretion heat efficiency, initial core entropy, and deuterium content. In this context, we predict that clusters with a higher D/H ratio should have less scatter in luminosity than clusters with a smaller D/H. Future work on this issue should include radiation-hydrodynamic simulations to determine the efficiency of accretion heating and further observations to investigate the deuterium content in star-forming regions. (abbrev.)

astro-ph.SR↗

arXiv2017

Size Dependence of Dust Distribution around the Earth Orbit

In the Solar System, interplanetary dust particles (IDPs) originating mainly from asteroid collisions and cometary activities drift to the Earth orbit due to the Poynting-Robertson drag. We analyzed the thermal emission from IDPs that was observed by the first Japanese infrared astronomical satellite, AKARI. The observed surface brightness in the trailing direction of the Earth orbit is 3.7% greater than that in the leading direction in the $9{\rm μm}$ band and 3.0% in the $18{\rm μm}$ band. In order to reveal dust properties causing the leading-trailing surface brightness asymmetry, we numerically integrated orbits of the Sun, the Earth, and a dust particle as a restricted three-body problem including radiation from the Sun. The initial orbits of particles are determined according to the orbits of main-belt asteroids or Jupiter-family comets. The orbital trapping in mean motion resonances results in a significant leading-trailing asymmetry so that intermediate sized dust (~10-100${\rm μm}$) produces a greater asymmetry than the zodiacal light has. The leading-trailing surface brightness difference integrated over the size distribution of the asteroidal dust is obtained to be the values of 27.7% and 25.3% in the $9{\rm μm}$ and $18{\rm μm}$ bands, respectively. In contrast, the brightness difference for cometary dust is calculated as the values of 3.6% and 3.1% in the $9{\rm μm}$ and $18{\rm μm}$ bands, respectively, if the maximum dust radius is set to be $s_{\rm max} = 3000{\rm μm}$. Taking into account these values and their errors, we conclude that the contribution of asteroidal dust to the zodiacal infrared emission is less than ~10%, while cometary dust of the order of 1 mm mainly accounts for the zodiacal light in infrared.

astro-ph.EP↗

arXiv2016

Parametric Study of the Rossby Wave Instability in a Two-Dimensional Barotropic Disk

Protoplanetary disks with non-axisymmetric structures have been observed. The Rossby wave instability (RWI) is considered as one of the origins of the non-axisymmetric structures. We perform linear stability analyses of the RWI in barotropic flow using four representative types of the background flow on a wide parameter space. We find that the co-rotation radius is located at the background vortensity minimum with large concavity if the system is marginally stable to the RWI, and this allows us to check the stability against the RWI easily. We newly derive the necessary and sufficient condition for the onset of the RWI in semi-analytic form. We discuss the applicability of the new condition in realistic systems and the physical nature of the RWI.

astro-ph.EP↗

arXiv2016

Mass constraint for a planet in a protoplanetary disk from the gap width

A giant planet creates a gap in a protoplanetary disk, which might explain the observed gaps in protoplanetary disks. The width and depth of the gaps depend on the planet mass and disk properties. We have performed two--dimensional hydrodynamic simulations for various planet masses, disk aspect ratios and viscosities, to obtain an empirical formula for the gap width. The gap width is proportional to the square root of the planet mass, -3/4 power of the disk aspect ratio and -1/4 power of the viscosity. This empirical formula enables us to estimate the mass of a planet embedded in the disk from the width of an observed gap. We have applied the empirical formula for the gap width to the disk around HL~Tau, assuming that each gap observed by ALMA observations is produced by planets, and discussed the planet masses within the gaps. The estimate of planet masses from the gap widths is less affected by the observational resolution and dust filtration than that from the gap depth.

astro-ph.EP↗

arXiv2015

Viscous Instability Triggered by Layered Accretion in Protoplanetary Disks

Layered accretion is one of the inevitable ingredients in protoplanetary disks when disk turbulence is excited by magnetorotational instabilities (MRIs). In the accretion, disk surfaces where MRIs fully operate have a high value of disk accretion rate ($\dot{M}$), while the disk midplane where MRIs are generally quenched ends up with a low value of $\dot{M}$. Significant progress on understanding MRIs has recently been made by a number of dedicated MHD simulations, which requires improvement of the classical treatment of $α$ in 1D disk models. To this end, we obtain a new expression of $α$ by utilizing an empirical formula that is derived from recent MHD simulations of stratified disks with Ohmic diffusion. It is interesting that this new formulation can be regarded as a general extension of the classical $α$. Armed with the new $α$, we perform a linear stability analysis of protoplanetary disks that undergo layered accretion, and find that a viscous instability can occur around the outer edge of dead zones. Disks become stable in using the classical $α$. We identify that the difference arises from $Σ-$dependence of $\dot{M}$; whereas $Σ$ is uniquely determined for a given value of $\dot{M}$ in the classical approach, the new approach leads to $\dot{M}$ that is a multi-valued function of $Σ$. We confirm our finding both by exploring a parameter space as well as by performing the 1D, viscous evolution of disks. We finally discuss other non-ideal MHD effects that are not included in our analysis, but may affect our results.

astro-ph.EP↗

arXiv2015

Significant Gas-to-Dust Ratio Asymmetry and Variation in the Disk of HD 142527 and the Indication of Gas Depletion

We investigate the dust and gas distribution in the disk around HD 142527 based on ALMA observations of dust continuum, 13CO(3-2), and C18O(3-2) emission. The disk shows strong azimuthal asymmetry in the dust continuum emission, while gas emission is more symmetric. In this paper, we investigate how gas and dust are distributed in the dust-bright northern part of the disk and in the dust-faint southern part. We construct two axisymmetric disk models. One reproduces the radial profiles of the continuum and the velocity moments 0 and 1 of CO lines in the north and the other reproduces those in the south. We have found that the dust is concentrated in a narrow ring having ~50AU width (in FWHM; w_d=30AU in our parameter definition) located at ~170-200AU from the central star. The dust particles are strongly concentrated in the north. We have found that the dust surface density contrast between the north and south amounts to ~70. Compared to the dust, the gas distribution is more extended in the radial direction. We find that the gas component extends at least from ~100AU to ~250AU from the central star, and there should also be tenuous gas remaining inside and outside of these radii. The azimuthal asymmetry of gas distribution is much smaller than dust. The gas surface density differs only by a factor of ~3-10 between the north and south. Hence, gas-to-dust ratio strongly depends on the location of the disk: ~30 at the location of the peak of dust distribution in the south and ~3 at the location of the peak of dust distribution in the north. Despite large uncertainties, the overall gas-to-dust ratio is inferred to be ~10-30, indicating that the gas depletion may have already been under way.

astro-ph.EP↗

arXiv2015

Detailed structure of the outer disk around HD 169142 with polarized light in H-band

Coronagraphic imagery of the circumstellar disk around HD 169142 in H-band polarized intensity (PI) with Subaru/HiCIAO is presented. The emission scattered by dust particles at the disk surface in 0.2" <= r <= 1.2", or 29 <= r <= 174 AU, is successfully detected. The azimuthally-averaged radial profile of the PI shows a double power-law distribution, in which the PIs in r=29-52 AU and r=81.2-145 AU respectively show r^{-3}-dependence. These two power-law regions are connected smoothly with a transition zone (TZ), exhibiting an apparent gap in r=40-70 AU. The PI in the inner power-law region shows a deep minimum whose location seems to coincide with the point source at λ= 7 mm. This can be regarded as another sign of a protoplanet in TZ. The observed radial profile of the PI is reproduced by a minimally flaring disk with an irregular surface density distribution or with an irregular temperature distribution or with the combination of both. The depletion factor of surface density in the inner power-law region (r< 50 AU) is derived to be <= 0.16 from a simple model calculation. The obtained PI image also shows small scale asymmetries in the outer power-law region. Possible origins for these asymmetries include corrugation of the scattering surface in the outer region, and shadowing effect by a puffed up structure in the inner power-law region.

astro-ph.SR↗

arXiv2015

Mass Estimates of a Giant Planet in a Protoplanetary Disk from the Gap Structures

A giant planet embedded in a protoplanetary disk forms a gap. An analytic relationship among the gap depth, planet mass $M_{p}$, disk aspect ratio $h_p$, and viscosity $α$ has been found recently, and the gap depth can be written in terms of a single parameter $K= (M_{p}/M_{\ast})^2 h_p^{-5} α^{-1}$. We discuss how observed gap features can be used to constrain the disk and/or planet parameters based on the analytic formula for the gap depth. The constraint on the disk aspect ratio is critical in determining the planet mass so the combination of the observations of the temperature and the image can provide a constraint on the planet mass. We apply the formula for the gap depth to observations of HL~Tau and HD~169142. In the case of HL~Tau, we propose that a planet with $\gtrsim 0.3$ is responsible for the observed gap at $30$~AU from the central star based on the estimate that the gap depth is $\lesssim 1/3$. In the case of HD~169142, the planet mass that causes the gap structure recently found by VLA is $\gtrsim 0.4 M_J$. We also argue that the spiral structure, if observed, can be used to estimate the lower limit of the disk aspect ratio and the planet mass.

astro-ph.EP↗

arXiv2015

Formation of a disc gap induced by a planet: Effect of the deviation from Keplerian disc rotation

The gap formation induced by a giant planet is important in the evolution of the planet and the protoplanetary disc. We examine the gap formation by a planet with a new formulation of one-dimensional viscous discs which takes into account the deviation from Keplerian disc rotation due to the steep gradient of the surface density. This formulation enables us to naturally include the Rayleigh stable condition for the disc rotation. It is found that the derivation from Keplerian disc rotation promotes the radial angular momentum transfer and makes the gap shallower than in the Keplerian case. For deep gaps, this shallowing effect becomes significant due to the Rayleigh condition. In our model, we also take into account the propagation of the density waves excited by the planet, which widens the range of the angular momentum deposition to the disc. The effect of the wave propagation makes the gap wider and shallower than the case with instantaneous wave damping. With these shallowing effects, our one-dimensional gap model is consistent with the recent hydrodynamic simulations.

astro-ph.EP↗

arXiv2014

Radial Transport of Large-Scale Magnetic Fields in Accretion Disks. II. Relaxation to Steady States

We study the time evolution of a large-scale magnetic flux threading an accretion disk. Induction equation of the mean poloidal field is solved under the standard viscous disk model. Magnetic flux evolution is controlled by the two timescales: One is the timescale of the inward advection of the magnetic flux, tau_{adv}. This is induced by the dragging of the flux by the accreting gas. The other is the outward diffusion timescale of the magnetic flux tau_{dif}. We consider diffusion due to the Ohmic resistivity. These timescales can be significantly different from the disk viscous timescale tau_{disk}. The behaviors of the magnetic flux evolution is quite different depending on the magnitude relationship of the timescales tau_{adv}, τ_{dif}, and tau_{disk}. The most interesting phenomena occurs when tau_{adv} << tau_{dif}, tau_{disk}. In such a case, the magnetic flux distribution approaches a quasi-steady profile much faster than the viscous evolution of the gas disk, and also the magnetic flux has been tightly bundled to the inner part of the disk. In the inner part, although the poloidal magnetic field becomes much stronger than the interstellar magnetic field, the field strength is limited to the maximum value that is analytically given by our previous work (Okuzumi et al. 2014, ApJ, 785, 127). We also find a condition for that the initial large magnetic flux, which is a fossil of the magnetic field dragging during the early phase of star formation, survives for a duration in which significant gas disk evolution proceeds.

astro-ph.EP↗

arXiv2014

Rotational Instability in the Outer Region of Protoplanetary Disks

We analytically calculate the marginally stable surface density profile for rotational instability of protoplanetary disks. The derived profile can be utilized for considering the region in a rotating disk where radial pressure gradient force is comparable to the gravitational force, such as an inner edge, steep gaps or bumps and an outer region of the disk. In this paper we especially focus on the rotational instability in the outer region of disks. We find an protoplanetary disk with a surface density profile of similarity solution becomes rotationally unstable at a certain radius, depending on its temperature profile and a mass of the central star. If the temperature is relatively low and the mass of the central star is high, disks have rotationally stable similarity profiles. Otherwise, deviation from the similarity profiles of surface density could be observable, using facilities with high sensitivity, such as ALMA.

astro-ph.EP↗

arXiv2014

Radial Transport of Large-Scale Magnetic Fields in Accretion Disks. I. Steady Solutions and an Upper Limit on the Vertical Field Strength

Large-scale magnetic fields are key ingredients of magnetically driven disk accretion. We study how large-scale poloidal fields evolve in accretion disks, with the primary aim of quantifying the viability of magnetic accretion mechanisms in protoplanetary disks. We employ a kinematic mean-field model for poloidal field transport and focus on steady states where inward advection of a field balances with outward diffusion due to effective resistivities. We analytically derive the steady-state radial distribution of poloidal fields in highly conducting accretion disks. The analytic solution reveals an upper limit on the strength of large-scale vertical fields attainable in steady states. Any excess poloidal field will be diffused away within a finite time, and we demonstrate this with time-dependent numerical calculations of the mean-field equations. We apply this upper limit to large-scale vertical fields threading protoplanetary disks. We find that the maximum attainable strength is about 0.1 G at 1 AU, and about 1 mG at 10 AU from the central star. When combined with recent magnetic accretion models, the maximum field strength translates into the maximum steady-state accretion rate of $\sim 10^{-7} M_\odot {\rm yr}^{-1}$, in agreement with observations. We also find that the maximum field strength is ~ 1 kG at the surface of the central star provided that the disk extends down to the stellar surface. This implies that any excess stellar poloidal field of strength >~ kG can be transported to the surrounding disk. This might in part resolve the magnetic flux problem in star formation.

astro-ph.EP↗

arXiv2013

Local Enhancement of Surface Density in the Protoplanetary Ring Surrounding HD 142527

We report ALMA observations of dust continuum, 13CO J=3--2, and C18O J=3--2 line emission toward a gapped protoplanetary disk around HD 142527. The outer horseshoe-shaped disk shows the strong azimuthal asymmetry in dust continuum with the contrast of about 30 at 336 GHz between the northern peak and the southwestern minimum. In addition, the maximum brightness temperature of 24 K at its northern area is exceptionally high at 160 AU from a star. To evaluate the surface density in this region, the grain temperature needs to be constrained and was estimated from the optically thick 13CO J=3--2 emission. The lower limit of the peak surface density was then calculated to be 28 g cm-2 by assuming a canonical gas-to-dust mass ratio of 100. This finding implies that the region is locally too massive to withstand self-gravity since Toomre's Q <~1--2, and thus, it may collapse into a gaseous protoplanet. Another possibility is that the gas mass is low enough to be gravitationally stable and only dust grains are accumulated. In this case, lower gas-to-dust ratio by at least 1 order of magnitude is required, implying possible formation of a rocky planetary core.

astro-ph.SR↗

arXiv2012

Minimum Dust Abundances for Planetesimal Formation via Secular Gravitational Instabilities

We estimate minimum dust abundances required for secular gravitational instability (SGI) to operate at the midplane dust layer of protoplanetary disks. For SGI to be a viable process, the growth time of the instability T_grow must be shorter than the radial drift time of the dust T_drift. The growth time depends on the turbulent diffusion parameter alpha, because the modes with short wavelengths are stabilized by turbulent diffusion. Assuming that turbulence is excited via the Kelvin-Helmholtz or streaming instabilities in the dust layer, and that its strength is controlled by the energy supply rate from dust accretion, we estimate the diffusion parameter and the growth time of the instability. The condition T_grow < T_drift requires that the dust abundance must be greater than a critical abundance Z_min, which is a function of the Toomre parameter Q_g and aspect ratio h_g / r of the gas disk. For a wide range of parameter space, the required dust abundance is less than 0.1. A slight increase in dust abundance opens a possible route for the dust to directly collapse to planetesimals.

astro-ph.EP↗

arXiv2011

Induced Turbulence and the Density Structure of the Dust Layer in a Protoplanetary Disk

We study the turbulence induced in the dust layer of a protoplanetary disk based on the energetics of dust accretion due to gas drag. We estimate turbulence strength from the energy supplied by dust accretion, using the radial drift velocity of the dust particles in a laminar disk. Our estimate of the turbulence strength agrees with previous analytical and numerical research on the turbulence induced by Kelvin-Helmholtz and/or streaming instabilities for particles whose stopping time is less than the Keplerian time. For such small particles, the strongest turbulence is expected to occur when the dust-to-gas ratio of the disk is ~C_eff^(1/2) (h_g / r) ~ 10^(-2), where C_eff ~ 0.2 represents the energy supply efficiency to turbulence and h_g / r ~ 5 x 10^(-2) is the aspect ratio of the gas disk. The maximum viscosity parameter is alpha_max ~ C_eff T_s (h_g / r)^2 ~ 10^(-4) T_s, where T_s (<1) is the non-dimensional stopping time of the dust particles. Modification in the dust-to-gas ratio from the standard value, 10^(-2), by any process, results in weaker turbulence and a thinner dust layer, and consequently may accelerate the growth process of the dust particles.

astro-ph.EP↗

arXiv2011

On the Interaction between a Protoplanetary Disk and a Planet in an Eccentric Orbit: Application of Dynamical Friction

We present a new analytic approach to the disk-planet interaction that is especially useful for planets with eccentricity larger than the disk aspect ratio. We make use of the dynamical friction formula to calculate the force exerted on the planet by the disk, and the force is averaged over the period of the planet. The resulting migration and eccentricity damping timescale agrees very well with the previous works in which the planet eccentricity is moderately larger than the disk aspect ratio. The advantage of this approach is that it is possible to apply this formulation to arbitrary large eccentricity. We have found that the timescale of the orbital evolution depends largely on the adopted disk model in the case of highly eccentric planets. We discuss the possible implication of our results to the theory of planet formation.

astro-ph.EP↗