arXiv subjects

Takuma Shirahata

Publications and source records attributed to Takuma Shirahata.

5 recordsLinked to original sources

arXiv2024

783-MHz fundamental repetition rate all-fiber ring laser mode-locked by carbon nanotubes

We demonstrate a 783-MHz fundamental repetition rate mode-locked Er-doped all-fiber ring laser with a pulse width of 623 fs. By using carbon nanotubes (CNT) saturable absorber (SA), a relatively low self-starting pump threshold of 108 mW is achieved. The laser has a very compact footprint less than 10 cm * 10 cm, benefiting from the all-active-fiber cavity design. The robust mode-locking is confirmed by the low relative intensity noise (RIN) and a long-term stability test. We propose a new scheme for generating high repetition rate femtosecond optical pulses from a compact and stable all-active-fiber ring oscillator.

physics.optics↗

arXiv2024

Mode-Locked Fiber Laser with up to 19 kHz Wavelength Sweep Rate via External Pump LD Modulation

For the first time, we introduce a rapid wavelength-swept, passively mode-locked fiber laser in an all-polarization-maintaining and all-fiber configuration. Achieving an exceptional wavelength sweep rate of up to 19 kHz through external modulation of the LD driver pump current, this laser offers a high sweep rate, simple cavity design, cost-effectiveness, and excellent repeatability.

physics.optics↗

arXiv2024

Temperature dependent multi-pulse threshold due to SWCNT/PDMS saturable absorber

The threshold pump power for modelocking decreased by 18% when the temperature was increased from 25 to 100 degrees C, where a SWCNT/PDMS coated tapered fiber was used as the saturable absorber in a fiber laser. Further, the pump power at which multi-pulse operation began decreased by 24%, and the pump power range over which fundamental modelocking could be maintained decreased by 59% over the same temperature range. This decrease in stability is attributed to the large thermo-optic coefficient of the PDMS polymer, which results in a 40% reduction of the overlap between the evanescent field and SWCNT coating of the taper fiber over a temperature range of 75 degrees C.

physics.optics↗

arXiv2024

Rapid-scanned and self-corrected repetition rates enabled in a bidirectional polarization-multiplexed fiber laser

Repetition-rate-scanned lasers are practical in accordion frequency comb generation that serves as a variable gearbox connecting optical and radio wave domains. Rapid and wide-range scanned repetition rate can benefit versatile purposes, however scanning robustness remains unsecured that typically requires complicated feedback loops. Recently, multiplexed lasers have been demonstrated with the nature of common-noise rejection among simultaneously emitted combs. Here, we propose a bidirectional polarization-multiplexed fiber laser that delivers synchronized pulses with rapid-scanned and reference-free repetition rates. Benefiting from the all polarization-maintaining fiber configuration, the laser shows good robustness and inter-comb coherence. As rapid as 493.5 kHz/s scanning rate over 329-kHz scanning range of fundamental repetition rate is realized. The 1-hour and 1-day maximal variations of difference frequency are merely 0.52 Hz and 5.46 Hz. The capability to rebuilt steady state after mode hopping is also demonstrated. These results provide a promising solution for developing high-performance accordion-frequency laser sources.

physics.optics↗

arXiv2024

Pump-power-controlled L-band wavelength-tunable mode-locked fiber laser utilizing all polarization maintaining nonlinear polarization rotation

For the first time, we present the pump power-controlled wavelength-tunable mode-locked fiber laser in the L-band (1565 nm to 1625 nm), achieved by all-polarization maintaining (all-PM) nonlinear polarization rotation (NPR). The wavelength of the laser can be tuned over 20 nm, from 1568.2 nm to 1588.9 nm simply by controlling the pump power from 45 mW to 115 mW. In contrast to conventional wavelength tuning mechanisms such as optical bandpass filters, our tuning method is non-mechanical and electrically controllable, featuring simplicity and cost-effectiveness in a superior all-fiber design.

physics.optics↗