arXiv subjects

Takuya Yoshioka

Publications and source records attributed to Takuya Yoshioka.

At least 55 records · Page 3Linked to original sources

arXiv2022

ICASSP 2022 Deep Noise Suppression Challenge

The Deep Noise Suppression (DNS) challenge is designed to foster innovation in the area of noise suppression to achieve superior perceptual speech quality. This is the 4th DNS challenge, with the previous editions held at INTERSPEECH 2020, ICASSP 2021, and INTERSPEECH 2021. We open-source datasets and test sets for researchers to train their deep noise suppression models, as well as a subjective evaluation framework based on ITU-T P.835 to rate and rank-order the challenge entries. We provide access to DNSMOS P.835 and word accuracy (WAcc) APIs to challenge participants to help with iterative model improvements. In this challenge, we introduced the following changes: (i) Included mobile device scenarios in the blind test set; (ii) Included a personalized noise suppression track with baseline; (iii) Added WAcc as an objective metric; (iv) Included DNSMOS P.835; (v) Made the training datasets and test sets fullband (48 kHz). We use an average of WAcc and subjective scores P.835 SIG, BAK, and OVRL to get the final score for ranking the DNS models. We believe that as a research community, we still have a long way to go in achieving excellent speech quality in challenging noisy real-world scenarios.

eess.AS↗

arXiv2022

PickNet: Real-Time Channel Selection for Ad Hoc Microphone Arrays

This paper proposes PickNet, a neural network model for real-time channel selection for an ad hoc microphone array consisting of multiple recording devices like cell phones. Assuming at most one person to be vocally active at each time point, PickNet identifies the device that is spatially closest to the active person for each time frame by using a short spectral patch of just hundreds of milliseconds. The model is applied to every time frame, and the short time frame signals from the selected microphones are concatenated across the frames to produce an output signal. As the personal devices are usually held close to their owners, the output signal is expected to have higher signal-to-noise and direct-to-reverberation ratios on average than the input signals. Since PickNet utilizes only limited acoustic context at each time frame, the system using the proposed model works in real time and is robust to changes in acoustic conditions. Speech recognition-based evaluation was carried out by using real conversational recordings obtained with various smartphones. The proposed model yielded significant gains in word error rate with limited computational cost over systems using a block-online beamformer and a single distant microphone.

eess.AS↗

arXiv2022

Transcribe-to-Diarize: Neural Speaker Diarization for Unlimited Number of Speakers using End-to-End Speaker-Attributed ASR

This paper presents Transcribe-to-Diarize, a new approach for neural speaker diarization that uses an end-to-end (E2E) speaker-attributed automatic speech recognition (SA-ASR). The E2E SA-ASR is a joint model that was recently proposed for speaker counting, multi-talker speech recognition, and speaker identification from monaural audio that contains overlapping speech. Although the E2E SA-ASR model originally does not estimate any time-related information, we show that the start and end times of each word can be estimated with sufficient accuracy from the internal state of the E2E SA-ASR by adding a small number of learnable parameters. Similar to the target-speaker voice activity detection (TS-VAD)-based diarization method, the E2E SA-ASR model is applied to estimate speech activity of each speaker while it has the advantages of (i) handling unlimited number of speakers, (ii) leveraging linguistic information for speaker diarization, and (iii) simultaneously generating speaker-attributed transcriptions. Experimental results on the LibriCSS and AMI corpora show that the proposed method achieves significantly better diarization error rate than various existing speaker diarization methods when the number of speakers is unknown, and achieves a comparable performance to TS-VAD when the number of speakers is given in advance. The proposed method simultaneously generates speaker-attributed transcription with state-of-the-art accuracy.

eess.AS↗

arXiv2021

Effect of Element Doping and Substitution on the Electronic Structure and Macroscopic Magnetic Properties of SmFe$_{12}$-based Compounds

The mechanisms underlying the enhancement of magnetic anisotropies (MAs) of Sm ions, owing to valence electrons at the Sm site and the screened nuclear charges of ligands, are clarified using a detailed analysis of crystal fields (CF). In order to investigate the finite-temperature magnetic properties, we developed an effective spin model for SmFe$_{12}X$ ($X$=H, B, C, and N) and SmFe$_{11}M$ ($M$=Ti, V, and Co), where the magnetic moments, CF parameters, and exchange fields were determined by first-principle calculations. Using this model, the MA constants and magnetization curves at finite temperatures were investigated using a recently introduced analytical method [T. Yoshioka, H. Tsuchiura, and P. Novák, Phys. Rev. B {\bf 102}, 184410 (2020)]. In SmFe$_{12}X$, the doped light elements $X$ are assumed to be at the $2b$ site, and in SmFe$_{11}M$, the substitution site of Fe is systematically investigated for all inequivalent $8f$, $8i$, and $8j$ sites. We found that the first-order MA constant $K_1$ is increased by a factor of about two when hydrogen is doped to the $2b$ site and when Fe is replaced by Ti or V at the $8j$ site, owing to the attraction of the prolate $4f$ electron cloud to the screened positive charges of the surrounding ligand ions. We found that when Fe is replaced by Co, the MA increases at all temperatures regardless of the substitution site. The substituted Co attracts electrons, which reduces the electron density in the region from the Sm site to the empty $2b$ site. This causes the $4f$ electron cloud at the Sm site to be fixed along the $c$-axis direction, which improves the MA. The calculated temperature dependence of $K_1(T)$ and $K_2(T)$ in SmFe$_{11}$Co qualitatively reproduces the experimental results in the case of Sm(Co$_x$Fe$_{1-x}$)$_{12}$ for $x$=0.1 and 0.07.

cond-mat.mtrl-sci↗

arXiv2021

Separating Long-Form Speech with Group-Wise Permutation Invariant Training

Multi-talker conversational speech processing has drawn many interests for various applications such as meeting transcription. Speech separation is often required to handle overlapped speech that is commonly observed in conversation. Although the original utterancelevel permutation invariant training-based continuous speech separation approach has proven to be effective in various conditions, it lacks the ability to leverage the long-span relationship of utterances and is computationally inefficient due to the highly overlapped sliding windows. To overcome these drawbacks, we propose a novel training scheme named Group-PIT, which allows direct training of the speech separation models on the long-form speech with a low computational cost for label assignment. Two different speech separation approaches with Group-PIT are explored, including direct long-span speech separation and short-span speech separation with long-span tracking. The experiments on the simulated meeting-style data demonstrate the effectiveness of our proposed approaches, especially in dealing with a very long speech input.

eess.AS↗

arXiv2021

Continuous Speech Separation with Recurrent Selective Attention Network

While permutation invariant training (PIT) based continuous speech separation (CSS) significantly improves the conversation transcription accuracy, it often suffers from speech leakages and failures in separation at "hot spot" regions because it has a fixed number of output channels. In this paper, we propose to apply recurrent selective attention network (RSAN) to CSS, which generates a variable number of output channels based on active speaker counting. In addition, we propose a novel block-wise dependency extension of RSAN by introducing dependencies between adjacent processing blocks in the CSS framework. It enables the network to utilize the separation results from the previous blocks to facilitate the current block processing. Experimental results on the LibriCSS dataset show that the RSAN-based CSS (RSAN-CSS) network consistently improves the speech recognition accuracy over PIT-based models. The proposed block-wise dependency modeling further boosts the performance of RSAN-CSS.

eess.AS↗

arXiv2021

Improving Noise Robustness of Contrastive Speech Representation Learning with Speech Reconstruction

Noise robustness is essential for deploying automatic speech recognition (ASR) systems in real-world environments. One way to reduce the effect of noise interference is to employ a preprocessing module that conducts speech enhancement, and then feed the enhanced speech to an ASR backend. In this work, instead of suppressing background noise with a conventional cascaded pipeline, we employ a noise-robust representation learned by a refined self-supervised framework for noisy speech recognition. We propose to combine a reconstruction module with contrastive learning and perform multi-task continual pre-training on noisy data. The reconstruction module is used for auxiliary learning to improve the noise robustness of the learned representation and thus is not required during inference. Experiments demonstrate the effectiveness of our proposed method. Our model substantially reduces the word error rate (WER) for the synthesized noisy LibriSpeech test sets, and yields around 4.1/7.5% WER reduction on noisy clean/other test sets compared to data augmentation. For the real-world noisy speech from the CHiME-4 challenge (1-channel track), we have obtained the state of the art ASR performance without any denoising front-end. Moreover, we achieve comparable performance to the best supervised approach reported with only 16% of labeled data.

cs.SD↗

arXiv2021

VarArray: Array-Geometry-Agnostic Continuous Speech Separation

Continuous speech separation using a microphone array was shown to be promising in dealing with the speech overlap problem in natural conversation transcription. This paper proposes VarArray, an array-geometry-agnostic speech separation neural network model. The proposed model is applicable to any number of microphones without retraining while leveraging the nonlinear correlation between the input channels. The proposed method adapts different elements that were proposed before separately, including transform-average-concatenate, conformer speech separation, and inter-channel phase differences, and combines them in an efficient and cohesive way. Large-scale evaluation was performed with two real meeting transcription tasks by using a fully developed transcription system requiring no prior knowledge such as reference segmentations, which allowed us to measure the impact that the continuous speech separation system could have in realistic settings. The proposed model outperformed a previous approach to array-geometry-agnostic modeling for all of the geometry configurations considered, achieving asclite-based speaker-agnostic word error rates of 17.5% and 20.4% for the AMI development and evaluation sets, respectively, in the end-to-end setting using no ground-truth segmentations.

eess.AS↗

arXiv2021

One model to enhance them all: array geometry agnostic multi-channel personalized speech enhancement

With the recent surge of video conferencing tools usage, providing high-quality speech signals and accurate captions have become essential to conduct day-to-day business or connect with friends and families. Single-channel personalized speech enhancement (PSE) methods show promising results compared with the unconditional speech enhancement (SE) methods in these scenarios due to their ability to remove interfering speech in addition to the environmental noise. In this work, we leverage spatial information afforded by microphone arrays to improve such systems' performance further. We investigate the relative importance of speaker embeddings and spatial features. Moreover, we propose a new causal array-geometry-agnostic multi-channel PSE model, which can generate a high-quality enhanced signal from arbitrary microphone geometry. Experimental results show that the proposed geometry agnostic model outperforms the model trained on a specific microphone array geometry in both speech quality and automatic speech recognition accuracy. We also demonstrate the effectiveness of the proposed approach for unseen array geometries.

eess.AS↗

arXiv2021

Personalized Speech Enhancement: New Models and Comprehensive Evaluation

Personalized speech enhancement (PSE) models utilize additional cues, such as speaker embeddings like d-vectors, to remove background noise and interfering speech in real-time and thus improve the speech quality of online video conferencing systems for various acoustic scenarios. In this work, we propose two neural networks for PSE that achieve superior performance to the previously proposed VoiceFilter. In addition, we create test sets that capture a variety of scenarios that users can encounter during video conferencing. Furthermore, we propose a new metric to measure the target speaker over-suppression (TSOS) problem, which was not sufficiently investigated before despite its critical importance in deployment. Besides, we propose multi-task training with a speech recognition back-end. Our results show that the proposed models can yield better speech recognition accuracy, speech intelligibility, and perceptual quality than the baseline models, and the multi-task training can alleviate the TSOS issue in addition to improving the speech recognition accuracy.

eess.AS↗

arXiv2021

All-neural beamformer for continuous speech separation

Continuous speech separation (CSS) aims to separate overlapping voices from a continuous influx of conversational audio containing an unknown number of utterances spoken by an unknown number of speakers. A common application scenario is transcribing a meeting conversation recorded by a microphone array. Prior studies explored various deep learning models for time-frequency mask estimation, followed by a minimum variance distortionless response (MVDR) filter to improve the automatic speech recognition (ASR) accuracy. The performance of these methods is fundamentally upper-bounded by MVDR's spatial selectivity. Recently, the all deep learning MVDR (ADL-MVDR) model was proposed for neural beamforming and demonstrated superior performance in a target speech extraction task using pre-segmented input. In this paper, we further adapt ADL-MVDR to the CSS task with several enhancements to enable end-to-end neural beamforming. The proposed system achieves significant word error rate reduction over a baseline spectral masking system on the LibriCSS dataset. Moreover, the proposed neural beamformer is shown to be comparable to a state-of-the-art MVDR-based system in real meeting transcription tasks, including AMI, while showing potentials to further simplify the runtime implementation and reduce the system latency with frame-wise processing.

eess.AS↗

arXiv2021

A Comparative Study of Modular and Joint Approaches for Speaker-Attributed ASR on Monaural Long-Form Audio

Speaker-attributed automatic speech recognition (SA-ASR) is a task to recognize "who spoke what" from multi-talker recordings. An SA-ASR system usually consists of multiple modules such as speech separation, speaker diarization and ASR. On the other hand, considering the joint optimization, an end-to-end (E2E) SA-ASR model has recently been proposed with promising results on simulation data. In this paper, we present our recent study on the comparison of such modular and joint approaches towards SA-ASR on real monaural recordings. We develop state-of-the-art SA-ASR systems for both modular and joint approaches by leveraging large-scale training data, including 75 thousand hours of ASR training data and the VoxCeleb corpus for speaker representation learning. We also propose a new pipeline that performs the E2E SA-ASR model after speaker clustering. Our evaluation on the AMI meeting corpus reveals that after fine-tuning with a small real data, the joint system performs 8.9--29.9% better in accuracy compared to the best modular system while the modular system performs better before such fine-tuning. We also conduct various error analyses to show the remaining issues for the monaural SA-ASR.

eess.AS↗

arXiv2021

Investigation of Practical Aspects of Single Channel Speech Separation for ASR

Speech separation has been successfully applied as a frontend processing module of conversation transcription systems thanks to its ability to handle overlapped speech and its flexibility to combine with downstream tasks such as automatic speech recognition (ASR). However, a speech separation model often introduces target speech distortion, resulting in a sub-optimum word error rate (WER). In this paper, we describe our efforts to improve the performance of a single channel speech separation system. Specifically, we investigate a two-stage training scheme that firstly applies a feature level optimization criterion for pretraining, followed by an ASR-oriented optimization criterion using an end-to-end (E2E) speech recognition model. Meanwhile, to keep the model light-weight, we introduce a modified teacher-student learning technique for model compression. By combining those approaches, we achieve a absolute average WER improvement of 2.70% and 0.77% using models with less than 10M parameters compared with the previous state-of-the-art results on the LibriCSS dataset for utterance-wise evaluation and continuous evaluation, respectively

eess.AS↗

arXiv2021

Human Listening and Live Captioning: Multi-Task Training for Speech Enhancement

With the surge of online meetings, it has become more critical than ever to provide high-quality speech audio and live captioning under various noise conditions. However, most monaural speech enhancement (SE) models introduce processing artifacts and thus degrade the performance of downstream tasks, including automatic speech recognition (ASR). This paper proposes a multi-task training framework to make the SE models unharmful to ASR. Because most ASR training samples do not have corresponding clean signal references, we alternately perform two model update steps called SE-step and ASR-step. The SE-step uses clean and noisy signal pairs and a signal-based loss function. The ASR-step applies a pre-trained ASR model to training signals enhanced with the SE model. A cross-entropy loss between the ASR output and reference transcriptions is calculated to update the SE model parameters. Experimental results with realistic large-scale settings using ASR models trained on 75,000-hour data show that the proposed framework improves the word error rate for the SE output by 11.82% with little compromise in the SE quality. Performance analysis is also carried out by changing the ASR model, the data used for the ASR-step, and the schedule of the two update steps.

eess.AS↗

arXiv2021

Large-Scale Pre-Training of End-to-End Multi-Talker ASR for Meeting Transcription with Single Distant Microphone

Transcribing meetings containing overlapped speech with only a single distant microphone (SDM) has been one of the most challenging problems for automatic speech recognition (ASR). While various approaches have been proposed, all previous studies on the monaural overlapped speech recognition problem were based on either simulation data or small-scale real data. In this paper, we extensively investigate a two-step approach where we first pre-train a serialized output training (SOT)-based multi-talker ASR by using large-scale simulation data and then fine-tune the model with a small amount of real meeting data. Experiments are conducted by utilizing 75 thousand (K) hours of our internal single-talker recording to simulate a total of 900K hours of multi-talker audio segments for supervised pre-training. With fine-tuning on the 70 hours of the AMI-SDM training data, our SOT ASR model achieves a word error rate (WER) of 21.2% for the AMI-SDM evaluation set while automatically counting speakers in each test segment. This result is not only significantly better than the previous state-of-the-art WER of 36.4% with oracle utterance boundary information but also better than a result by a similarly fine-tuned single-talker ASR model applied to beamformed audio.

eess.AS↗

arXiv2021

End-to-End Speaker-Attributed ASR with Transformer

This paper presents our recent effort on end-to-end speaker-attributed automatic speech recognition, which jointly performs speaker counting, speech recognition and speaker identification for monaural multi-talker audio. Firstly, we thoroughly update the model architecture that was previously designed based on a long short-term memory (LSTM)-based attention encoder decoder by applying transformer architectures. Secondly, we propose a speaker deduplication mechanism to reduce speaker identification errors in highly overlapped regions. Experimental results on the LibriSpeechMix dataset shows that the transformer-based architecture is especially good at counting the speakers and that the proposed model reduces the speaker-attributed word error rate by 47% over the LSTM-based baseline. Furthermore, for the LibriCSS dataset, which consists of real recordings of overlapped speech, the proposed model achieves concatenated minimum-permutation word error rates of 11.9% and 16.3% with and without target speaker profiles, respectively, both of which are the state-of-the-art results for LibriCSS with the monaural setting.

eess.AS↗

arXiv2021

Finite-temperature magnetic properties of Sm2Fe17Nx using an ab-initio effective spin model

In this study, we investigate the finite-temperature magnetic properties of Sm2Fe17Nx (x = 0,3) using an effective spin model constructed based on the information obtained by first-principles calculations. We find that assuming the plausible trivalent Sm3+ configuration results in a model that can satisfactorily describe the magnetization curves of Sm2Fe17N3. By contrast, the model based on the divalent Sm2+ configuration is suitable to reproduce the magnetization curves of Sm2Fe17. These results expand the understanding of how electronic structure affects the magnetic properties of these compounds.

cond-mat.mtrl-sci↗

arXiv2021

Continuous Speech Separation with Ad Hoc Microphone Arrays

Speech separation has been shown effective for multi-talker speech recognition. Under the ad hoc microphone array setup where the array consists of spatially distributed asynchronous microphones, additional challenges must be overcome as the geometry and number of microphones are unknown beforehand. Prior studies show, with a spatial-temporalinterleaving structure, neural networks can efficiently utilize the multi-channel signals of the ad hoc array. In this paper, we further extend this approach to continuous speech separation. Several techniques are introduced to enable speech separation for real continuous recordings. First, we apply a transformer-based network for spatio-temporal modeling of the ad hoc array signals. In addition, two methods are proposed to mitigate a speech duplication problem during single talker segments, which seems more severe in the ad hoc array scenarios. One method is device distortion simulation for reducing the acoustic mismatch between simulated training data and real recordings. The other is speaker counting to detect the single speaker segments and merge the output signal channels. Experimental results for AdHoc-LibiCSS, a new dataset consisting of continuous recordings of concatenated LibriSpeech utterances obtained by multiple different devices, show the proposed separation method can significantly improve the ASR accuracy for overlapped speech with little performance degradation for single talker segments.

cs.SD↗