arXiv subjects

Tao Jiang

Publications and source records attributed to Tao Jiang.

At least 217 records · Page 12Linked to original sources

arXiv2021

Learning to Reflect and to Beamform for Intelligent Reflecting Surface with Implicit Channel Estimation

Intelligent reflecting surface (IRS), which consists of a large number of tunable reflective elements, is capable of enhancing the wireless propagation environment in a cellular network by intelligently reflecting the electromagnetic waves from the base-station (BS) toward the users. The optimal tuning of the phase shifters at the IRS is, however, a challenging problem, because due to the passive nature of reflective elements, it is difficult to directly measure the channels between the IRS, the BS, and the users. Instead of following the traditional paradigm of first estimating the channels then optimizing the system parameters, this paper advocates a machine learning approach capable of directly optimizing both the beamformers at the BS and the reflective coefficients at the IRS based on a system objective. This is achieved by using a deep neural network to parameterize the mapping from the received pilots (plus any additional information, such as the user locations) to an optimized system configuration, and by adopting a permutation invariant/equivariant graph neural network (GNN) architecture to capture the interactions among the different users in the cellular network. Simulation results show that the proposed implicit channel estimation based approach is generalizable, can be interpreted, and can efficiently learn to maximize a sum-rate or minimum-rate objective from a much fewer number of pilots than the traditional explicit channel estimation based approaches.

eess.SP↗

arXiv2021

Securing IoT Devices by Exploiting Backscatter Propagation Signatures

The low-power radio technologies open up many opportunities to facilitate Internet-of-Things (IoT) into our daily life, while their minimalist design also makes IoT devices vulnerable to many active attacks. Recent advances use an antenna array to extract fine-grained physical-layer signatures to identify the attackers, which adds burdens in terms of energy and hardware cost to IoT devices. In this paper, we present ShieldScatter, a lightweight system that attaches low-cost tags to single-antenna devices to shield the system from active attacks. The key insight of ShieldScatter is to intentionally create multi-path propagation signatures with the careful deployment of tags. These signatures can be used to construct a sensitive profile to identify the location of the signals' arrival, and thus detect the threat. In addition, we also design a tag-random scheme and a multiple receivers combination approach to detect a powerful attacker who has the strong priori knowledge of the legitimate user. We prototype ShieldScatter with USRPs and tags to evaluate our system in various environments. The results show that even when the powerful attacker is close to the legitimate device, ShieldScatter can mitigate 95% of attack attempts while triggering false alarms on just 7% of legitimate traffic.

cs.CR↗

arXiv2021

Two-dimensional charge density wave TaX$_2$ (X=S, Se, Te) from first principles

Transition metal dichalcogenides are rich in their structural phases, e.g. 1T-TaS2 and 1T-TaSe2 form charge density wave (CDW) under low temperature with interesting and exotic properties. Here, we present a systematic study of different structures in two-dimensional TaX2 (X=S, Se, Te) using density functional theory calculations with consideration of van der Waals interaction. All the normal phases present metal characteristics with various ground state and magnetic properties. The lattice reconstruction of CDW drastically affects the electronic and structural characteristics of 1T-TaS2 and 1T-TaSe2, leading to a transition from metal to insulator and an emergence of magnetic moment within periodic atomic clusters called the Star of David. The evaluated Heisenberg couplings indicate the weak ferromagnetic coupling between the clusters in monolayer. Furthermore, in bilayer commensurate CDW cases, we find intriguing phenomenon of the varying magnetic properties with different stacking orders. The magnetic moment in each layer disappears when two layers are coupled, but may sustain in certain stackings of interlayer antiferromagnetic configurations.

cond-mat.mtrl-sci↗

arXiv2021

Non-invasive time-sorting in radio-frequency compressed ultrafast electron diffraction

We demonstrate a non-invasive time-sorting method for ultrafast electron diffraction (UED) experiments with radio-frequency (rf) compressed electron beams. We show that electron beam energy and arrival time at the sample after rf compression are strongly correlated such that the arrival time jitter may be corrected through measurement of the beam energy. The method requires minimal change to the infrastructure of most of the UED machines and is applicable to both keV and MeV UED. In our experiment with ~3 MeV beam, the timing jitter after rf compression is corrected with 35 fs root-mean-square (rms) accuracy, limited by the 3x10^-4 energy stability. For keV UED with high energy stability, sub-10 fs accuracy in time-sorting should be readily achievable. This time-sorting technique allows us to retrieve the 2.5 THz oscillation related to coherent A1g phonon in laser excited Bismuth film and extends the temporal resolution of UED to a regime far beyond the 100-200 fs rms jitter limitation.

physics.acc-ph↗

arXiv2021

Detecting new edge types in a temporal network model

Networks representing complex systems in nature and society usually involve multiple interaction types. These types suggest essential information on the interactions between components, but not all of the existing types are usually discovered. Therefore, detecting the undiscovered edge types is crucial for deepening our understanding of the network structure. Although previous studies have discussed the edge label detection problem, we still lack effective methods for uncovering previously-undetected edge types. Here, we develop an effective technique to detect undiscovered new edge types in networks by leveraging a novel temporal network model. Both analytical and numerical results show that the prediction accuracy of our method is perfect when the model networks' time parameter approaches infinity. Furthermore, we find that when time is finite, our method is still significantly more accurate than the baseline.

physics.soc-ph↗

arXiv2021

Skeletor: Skeletal Transformers for Robust Body-Pose Estimation

Predicting 3D human pose from a single monoscopic video can be highly challenging due to factors such as low resolution, motion blur and occlusion, in addition to the fundamental ambiguity in estimating 3D from 2D. Approaches that directly regress the 3D pose from independent images can be particularly susceptible to these factors and result in jitter, noise and/or inconsistencies in skeletal estimation. Much of which can be overcome if the temporal evolution of the scene and skeleton are taken into account. However, rather than tracking body parts and trying to temporally smooth them, we propose a novel transformer based network that can learn a distribution over both pose and motion in an unsupervised fashion. We call our approach Skeletor. Skeletor overcomes inaccuracies in detection and corrects partial or entire skeleton corruption. Skeletor uses strong priors learn from on 25 million frames to correct skeleton sequences smoothly and consistently. Skeletor can achieve this as it implicitly learns the spatio-temporal context of human motion via a transformer based neural network. Extensive experiments show that Skeletor achieves improved performance on 3D human pose estimation and further provides benefits for downstream tasks such as sign language translation.

cs.CV↗

arXiv2021

A Hierarchical Conditional Random Field-based Attention Mechanism Approach for Gastric Histopathology Image Classification

In the Gastric Histopathology Image Classification (GHIC) tasks, which are usually weakly supervised learning missions, there is inevitably redundant information in the images. Therefore, designing networks that can focus on effective distinguishing features has become a popular research topic. In this paper, to accomplish the tasks of GHIC superiorly and to assist pathologists in clinical diagnosis, an intelligent Hierarchical Conditional Random Field based Attention Mechanism (HCRF-AM) model is proposed. The HCRF-AM model consists of an Attention Mechanism (AM) module and an Image Classification (IC) module. In the AM module, an HCRF model is built to extract attention regions. In the IC module, a Convolutional Neural Network (CNN) model is trained with the attention regions selected and then an algorithm called Classification Probability-based Ensemble Learning is applied to obtain the image-level results from patch-level output of the CNN. In the experiment, a classification specificity of 96.67% is achieved on a gastric histopathology dataset with 700 images. Our HCRF-AM model demonstrates high classification performance and shows its effectiveness and future potential in the GHIC field.

cs.CV↗

arXiv2021

Evaluating the Immediate Applicability of Pose Estimation for Sign Language Recognition

Signed languages are visual languages produced by the movement of the hands, face, and body. In this paper, we evaluate representations based on skeleton poses, as these are explainable, person-independent, privacy-preserving, low-dimensional representations. Basically, skeletal representations generalize over an individual's appearance and background, allowing us to focus on the recognition of motion. But how much information is lost by the skeletal representation? We perform two independent studies using two state-of-the-art pose estimation systems. We analyze the applicability of the pose estimation systems to sign language recognition by evaluating the failure cases of the recognition models. Importantly, this allows us to characterize the current limitations of skeletal pose estimation approaches in sign language recognition.

cs.CL↗

arXiv2021

Beam-Squint Mitigating for Reconfigurable Intelligent Surface Aided Wideband MmWave Communications

In this paper, we focus our attention on the mitigation of beam squint for reconfigurable intelligent surface (RIS) aided wideband millimeter wave (mmWave) communications. Due to the intrinsic passive property, the phase shifts of all elements in RIS should be the same for all frequencies. However, in the wideband scenario, beam squint induced distinct path phases require designing different phase shifts for different frequencies. The above irreconcilable contradiction will dramatically affect the system performance, considering the RIS usually consists of enormous elements and the bandwidth of wideband mmWave communications may be up to several GHz. Therefore, we propose some novel phase shift design schemes for mitigating the effect of beam squint for both line-of-sight (LoS) and non-Los (NLoS) scenarios. Specifically, for the LoS scenario, we firstly derive the optimal phase shift for each frequency and obtain the common phase shift by maximizing the upper bound of achievable rate. Then, for the NLoS scenario, a mean channel covariance matrix (MCCM) based scheme is proposed by fully exploiting the correlations between both the paths and the subcarriers. Our extensive numerical experiments confirm the effectiveness of the proposed phase shift design schemes.

cs.IT↗

arXiv2021

LoRa Backscatter Assisted State Estimator for Micro Aerial Vehicles with Online Initialization

The advances in agile micro aerial vehicles (MAVs) have shown great potential in replacing humans for labor-intensive or dangerous indoor investigation, such as warehouse management and fire rescue. However, the design of a state estimation system that enables autonomous flight poses fundamental challenges in such dim or smoky environments. Current dominated computer-vision based solutions only work in well-lighted texture-rich environments. This paper addresses the challenge by proposing Marvel, an RF backscatter-based state estimation system with online initialization and calibration. Marvel is nonintrusive to commercial MAVs by attaching backscatter tags to their landing gears without internal hardware modifications, and works in a plug-and-play fashion with an automatic initialization module. Marvel is enabled by three new designs, a backscatter-based pose sensing module, an online initialization and calibration module, and a backscatter-inertial super-accuracy state estimation algorithm. We demonstrate our design by programming a commercial MAV to autonomously fly in different trajectories. The results show that Marvel supports navigation within a range of 50 m or through three concrete walls, with an accuracy of 34 cm for localization and 4.99 degrees for orientation estimation. We further demonstrate our online initialization and calibration by comparing to the perfect initial parameter measurements from burdensome manual operations.

cs.RO↗

arXiv2021

A New Pairwise Deep Learning Feature For Environmental Microorganism Image Analysis

Environmental microorganism (EM) offers a high-efficient, harmless, and low-cost solution to environmental pollution. They are used in sanitation, monitoring, and decomposition of environmental pollutants. However, this depends on the proper identification of suitable microorganisms. In order to fasten, low the cost, increase consistency and accuracy of identification, we propose the novel pairwise deep learning features to analyze microorganisms. The pairwise deep learning features technique combines the capability of handcrafted and deep learning features. In this technique we, leverage the Shi and Tomasi interest points by extracting deep learning features from patches which are centered at interest points locations. Then, to increase the number of potential features that have intermediate spatial characteristics between nearby interest points, we use Delaunay triangulation theorem and straight-line geometric theorem to pair the nearby deep learning features. The potential of pairwise features is justified on the classification of EMs using SVMs, k-NN, and Random Forest classifier. The pairwise features obtain outstanding results of 99.17%, 91.34%, 91.32%, 91.48%, and 99.56%, which are the increase of about 5.95%, 62.40%, 62.37%, 61.84%, and 3.23% in accuracy, F1-score, recall, precision, and specificity respectively, compared to non-paired deep learning features.

cs.CV↗

arXiv2021

Policy-Aware Mobility Model Explains the Growth of COVID-19 in Cities

With the continued spread of coronavirus, the task of forecasting distinctive COVID-19 growth curves in different cities, which remain inadequately explained by standard epidemiological models, is critical for medical supply and treatment. Predictions must take into account non-pharmaceutical interventions to slow the spread of coronavirus, including stay-at-home orders, social distancing, quarantine and compulsory mask-wearing, leading to reductions in intra-city mobility and viral transmission. Moreover, recent work associating coronavirus with human mobility and detailed movement data suggest the need to consider urban mobility in disease forecasts. Here we show that by incorporating intra-city mobility and policy adoption into a novel metapopulation SEIR model, we can accurately predict complex COVID-19 growth patterns in U.S. cities ($R^2$ = 0.990). Estimated mobility change due to policy interventions is consistent with empirical observation from Apple Mobility Trends Reports (Pearson's R = 0.872), suggesting the utility of model-based predictions where data are limited. Our model also reproduces urban "superspreading", where a few neighborhoods account for most secondary infections across urban space, arising from uneven neighborhood populations and heightened intra-city churn in popular neighborhoods. Therefore, our model can facilitate location-aware mobility reduction policy that more effectively mitigates disease transmission at similar social cost. Finally, we demonstrate our model can serve as a fine-grained analytic and simulation framework that informs the design of rational non-pharmaceutical interventions policies.

q-bio.PE↗

arXiv2021

EMDS-5: Environmental Microorganism Image Dataset Fifth Version for Multiple Image Analysis Tasks

Environmental Microorganism Data Set Fifth Version (EMDS-5) is a microscopic image dataset including original Environmental Microorganism (EM) images and two sets of Ground Truth (GT) images. The GT image sets include a single-object GT image set and a multi-object GT image set. The EMDS-5 dataset has 21 types of EMs, each of which contains 20 original EM images, 20 single-object GT images and 20 multi-object GT images. EMDS-5 can realize to evaluate image preprocessing, image segmentation, feature extraction, image classification and image retrieval functions. In order to prove the effectiveness of EMDS-5, for each function, we select the most representative algorithms and price indicators for testing and evaluation. The image preprocessing functions contain two parts: image denoising and image edge detection. Image denoising uses nine kinds of filters to denoise 13 kinds of noises, respectively. In the aspect of edge detection, six edge detection operators are used to detect the edges of the images, and two evaluation indicators, peak-signal to noise ratio and mean structural similarity, are used for evaluation. Image segmentation includes single-object image segmentation and multi-object image segmentation. Six methods are used for single-object image segmentation, while k-means and U-net are used for multi-object segmentation.We extract nine features from the images in EMDS-5 and use the Support Vector Machine classifier for testing. In terms of image classification, we select the VGG16 feature to test different classifiers. We test two types of retrieval approaches: texture feature retrieval and deep learning feature retrieval. We select the last layer of features of these two deep learning networks as feature vectors. We use mean average precision as the evaluation index for retrieval.

cs.CV↗

arXiv2021

Towards Cross-Modal Forgery Detection and Localization on Live Surveillance Videos

The cybersecurity breaches render surveillance systems vulnerable to video forgery attacks, under which authentic live video streams are tampered to conceal illegal human activities under surveillance cameras. Traditional video forensics approaches can detect and localize forgery traces in each video frame using computationally-expensive spatial-temporal analysis, while falling short in real-time verification of live video feeds. The recent work correlates time-series camera and wireless signals to recognize replayed surveillance videos using event-level timing information but it cannot realize fine-grained forgery detection and localization on each frame. To fill this gap, this paper proposes Secure-Pose, a novel cross-modal forgery detection and localization system for live surveillance videos using WiFi signals near the camera spot. We observe that coexisting camera and WiFi signals convey common human semantic information and the presence of forgery attacks on video frames will decouple such information correspondence. Secure-Pose extracts effective human pose features from synchronized multi-modal signals and detects and localizes forgery traces under both inter-frame and intra-frame attacks in each frame. We implement Secure-Pose using a commercial camera and two Intel 5300 NICs and evaluate it in real-world environments. Secure-Pose achieves a high detection accuracy of 95.1% and can effectively localize tampered objects under different forgery attacks.

cs.CR↗

arXiv2020

Detecting Colluding Sybil Attackers in Robotic Networks using Backscatters

Due to the openness of wireless medium, robotic networks that consist of many miniaturized robots are susceptible to Sybil attackers, who can fabricate myriads of fictitious robots. Such detrimental attacks can overturn the fundamental trust assumption in robotic collaboration and thus impede widespread deployments of robotic networks in many collaborative tasks. Existing solutions rely on bulky multi-antenna systems to passively obtain fine-grained physical layer signatures, making them unaffordable to miniaturized robots. To overcome this limitation, we present ScatterID, a lightweight system that attaches featherlight and batteryless backscatter tags to single-antenna robots for Sybil attack mitigation. Instead of passively "observing" signatures, ScatterID actively "manipulates" multipath propagation by exploiting backscatter tags to intentionally create rich multipath signatures obtainable to single-antenna robots. Particularly, these signatures are used to carefully construct similarity vectors to thwart advanced Sybil attackers, who further trigger power-scaling and colluding attacks to generate dissimilar signatures. Then, a customized random forest model is developed to accurately infer the identity legitimacy of each robot. We implement ScatterID on the iRobot Create platform and evaluate it under various Sybil attacks in real-world environments. The experimental results show that ScatterID achieves a high AUROC of 0.987 and obtains an overall accuracy of 95.4% under basic and advanced Sybil attacks. Specifically, it can successfully detect 96.1% of fake robots while mistakenly rejecting just 5.7% of legitimate ones.

cs.CR↗

arXiv2020

Peer-to-Peer Localization for Single-Antenna Devices

Some important indoor localization applications, such as localizing a lost kid in a shopping mall, call for a new peer-to-peer localization technique that can localize an individual's smartphone or wearables by directly using another's on-body devices in unknown indoor environments. However, current localization solutions either require pre-deployed infrastructures or multiple antennas in both transceivers, impending their wide-scale application. In this paper, we present P2PLocate, a peer-to-peer localization system that enables a single-antenna device co-located with a batteryless backscatter tag to localize another single-antenna device with decimeter-level accuracy. P2PLocate leverages the multipath variations intentionally created by an on-body backscatter tag, coupled with spatial information offered by user movements, to accomplish this objective without relying on any pre-deployed infrastructures or pre-training. P2PLocate incorporates novel algorithms to address two major challenges: (i) interference with strong direct-path signal while extracting multipath variations, and (ii) lack of direction information while using single-antenna transceivers. We implement P2PLocate on commercial off-the-shelf Google Nexus 6p, Intel 5300 WiFi card, and Raspberry Pi B4. Real-world experiments reveal that P2PLocate can localize both static and mobile targets with a median accuracy of 0.88 m.

eess.SP↗

arXiv2020

Reinforced Molecular Optimization with Neighborhood-Controlled Grammars

A major challenge in the pharmaceutical industry is to design novel molecules with specific desired properties, especially when the property evaluation is costly. Here, we propose MNCE-RL, a graph convolutional policy network for molecular optimization with molecular neighborhood-controlled embedding grammars through reinforcement learning. We extend the original neighborhood-controlled embedding grammars to make them applicable to molecular graph generation and design an efficient algorithm to infer grammatical production rules from given molecules. The use of grammars guarantees the validity of the generated molecular structures. By transforming molecular graphs to parse trees with the inferred grammars, the molecular structure generation task is modeled as a Markov decision process where a policy gradient strategy is utilized. In a series of experiments, we demonstrate that our approach achieves state-of-the-art performance in a diverse range of molecular optimization tasks and exhibits significant superiority in optimizing molecular properties with a limited number of property evaluations.

cs.LG↗

arXiv2020

Joint Energy Harvest and Information Transfer for Energy Beamforming in Backscatter Multiuser Networks

Wirelessly powered backscatter communication (WPBC) has been identified as a promising technology for low-power communication systems, which can reap the benefits of energy beamforming to improve energy transfer efficiency. However, existing studies on energy beamforming fail to simultaneously take energy supply and information transfer in WPBC into account. This paper takes the first step to fill this gap, by considering the restrictive relationship between the energy harvesting rate and achievable rate with estimated backscatter channel state information (BS-CSI). To ensure reliable communication and user fairness, we formulate the energy beamforming design as a max-min optimization problem by maximizing the minimum achievable rate for all backscatter tags subject to the energy constraint. We derive the closed-form expression of the energy harvesting rate, as well as the lower bound of the achievable rate for maximum-ratio combining (MRC) and zero-forcing (ZF) receivers. Our numerical results indicate that our scheme significantly outperforms state-of-the-art energy beamforming schemes. Additionally, the achievable rate of our scheme approaches more than $90\%$ of the rate limit achieved via beamforming with perfect CSI for both receivers.

cs.IT↗