arXiv subjects

Tarek Bouazza

Publications and source records attributed to Tarek Bouazza.

9 recordsLinked to original sources

arXiv2026

Leader-Follower Formation Control with Prescribed Convergence Rates under Bearing Persistence of Excitation

This paper addresses leader-follower formation control using only relative bearing and velocity measurements. Bearing-based leader-follower control strategies commonly use fixed control gains, for which the guaranteed convergence rates explicitly depend on the persistence of excitation (PE) properties of the desired formations. We propose a time-varying matrix gain that evolves according to the bearing information available to each follower and decouples the convergence rate from the PE bound. We establish the well-posedness and uniform boundedness of the proposed gain for bearing-persistently exciting formations, and characterize the exponential convergence rate through a tunable design parameter. The proposed control design is further extended to leader-follower formations with double-integrator dynamics. Simulations illustrate the resulting convergence properties compared with fixed gain designs.

eess.SY↗

arXiv2026

Vision-Aided Relative State Estimation for Approach and Landing on a Moving Platform with Inertial Measurements

This paper tackles the problem of estimating the relative position, orientation, and velocity between a UAV and a planar platform undergoing arbitrary 3D motion during approach and landing. The estimation relies on measurements from Inertial Measurement Units (IMUs) mounted on both systems, assuming there is a suitable communication channel to exchange data, together with visual information provided by an onboard monocular camera, from which the bearing (line-of-sight direction) to the platform's center and the normal vector of its planar surface are extracted. We propose a cascade observer with a complementary filter on $\mathbf{SO}(3)$ to reconstruct the relative attitude, followed by a linear Riccati observer for relative position and velocity estimation. Convergence of both observers is established under persistently exciting conditions, and the cascade is shown to be almost globally asymptotically and locally exponentially stable. We further extend the design to the case where the platform's rotation is restricted to its normal axis and show that its measured linear acceleration can be exploited to recover the remaining unobservable rotation angle. A sufficient condition for local exponential convergence in this setting is provided. The proposed observers are validated through extensive simulations.

eess.SY↗

arXiv2026

Scalar-Measurement Attitude Estimation on $\mathbf{SO}(3)$ with Bias Compensation

Attitude estimation methods typically rely on full vector measurements from inertial sensors such as accelerometers and magnetometers. This paper shows that reliable estimation can also be achieved using only scalar measurements, which naturally arise either as components of vector readings or as independent constraints from other sensing modalities. We propose nonlinear deterministic observers on $\mathbf{SO}(3)$ that incorporate gyroscope bias compensation and guarantee uniform local exponential stability under suitable observability conditions. A key feature of the framework is its robustness to partial sensing: accurate estimation is maintained even when only a subset of vector components is available. Experimental validation on the BROAD dataset confirms consistent performance across progressively reduced measurement configurations, with estimation errors remaining small even under severe information loss. To the best of our knowledge, this is the first work to establish fundamental observability results showing that two scalar measurements under suitable excitation suffice for attitude estimation, and that three are enough in the static case. These results position scalar-measurement-based observers as a practical and reliable alternative to conventional vector-based approaches.

eess.SY↗

arXiv2026

Relative Pose-Velocity Estimation Using Dual IMU Measurements and Relative Position Sensing

This paper addresses the problem of estimating the relative pose (position and orientation) and velocity of a vehicle with respect to a moving target, where both are equipped with Inertial Measurement Units (IMUs), assuming the availability of relative position or bearing measurements. The body-target relative dynamics are formulated on $\mathbf{SE}_2(3)$ and recast into a linear time-varying (LTV) model in the ambient space $\mathbb{R}^{15}$, on which a deterministic Riccati observer is designed. We analyze the uniform observability (UO) conditions required to guarantee global exponential convergence of the estimation error in the ambient space for both measurement cases. In the case of relative position measurements, UO requires only a persistence-of-excitation condition on the target acceleration, whereas for bearing measurements, additional conditions are required. Building on this, a nonlinear complementary filter on $\mathbf{SO}(3)$ is designed to provide a smooth estimate of the orientation component of the state with almost global asymptotic stability. Finally, simulation results are provided to validate the proposed solution.

eess.SY↗

arXiv2026

Equivariant Observer Design on SL(3) for Image Intensity-Based Homography Estimation

This paper addresses the problem of homography estimation using a nonlinear observer designed on the Lie group $\mathbf{SL}(3)$ that exploits the full image information through direct image registration. Unlike traditional feature-based methods, which rely on extensive feature extraction and matching, the proposed approach formulates an observer that minimises a cost function defined directly in terms of image pixel intensities. Explicit conditions ensuring the non-degeneracy of the cost function are derived, and a comprehensive analysis is conducted to characterise and generate degenerate (unobservable) image configurations. Theoretical results demonstrate local exponential convergence of the observer. To improve local convergence properties, a second-order observer variant is introduced by incorporating the Hessian of the cost function into the correction term. Simulation results demonstrate the performance of the proposed solutions on real images.

eess.SY↗

arXiv2025

Observer Design for Optical Flow-Based Visual-Inertial Odometry with Almost-Global Convergence

This paper presents a novel cascaded observer architecture that combines optical flow and IMU measurements to perform continuous monocular visual-inertial odometry (VIO). The proposed solution estimates body-frame velocity and gravity direction simultaneously by fusing velocity direction information from optical flow measurements with gyro and accelerometer data. This fusion is achieved using a globally exponentially stable Riccati observer, which operates under persistently exciting translational motion conditions. The estimated gravity direction in the body frame is then employed, along with an optional magnetometer measurement, to design a complementary observer on $\mathbf{SO}(3)$ for attitude estimation. The resulting interconnected observer architecture is shown to be almost globally asymptotically stable. To extract the velocity direction from sparse optical flow data, a gradient descent algorithm is developed to solve a constrained minimization problem on the unit sphere. The effectiveness of the proposed algorithms is validated through simulation results.

cs.RO↗

arXiv2025

A Simple Algebraic Solution for Estimating the Pose of a Camera from Planar Point Features

This paper presents a simple algebraic method to estimate the pose of a camera relative to a planar target from $n \geq 4$ reference points with known coordinates in the target frame and their corresponding bearing measurements in the camera frame. The proposed approach follows a hierarchical structure; first, the unit vector normal to the target plane is determined, followed by the camera's position vector, its distance to the target plane, and finally, the full orientation. To improve the method's robustness to measurement noise, an averaging methodology is introduced to refine the estimation of the target's normal direction. The accuracy and robustness of the approach are validated through extensive experiments.

cs.CV↗

arXiv2024

Exploiting polar symmetry in designing equivariant observers for vision-based motion estimation

Accurately estimating camera motion from image sequences poses a significant challenge in computer vision and robotics. Many computer vision methods first compute the essential matrix associated with a motion and then extract orientation and normalized translation as inputs to pose estimation, reconstructing the scene scale (that is unobservable in the epipolar construction) from separate information. In this paper, we design a continuous-time filter that exploits the same perspective by using the epipolar constraint to define pseudo-measurements. We propose a novel polar symmetry on the pose of the camera that makes these measurements equivariant. This allows us to apply recent results from equivariant systems theory to estimating pose. We provide a novel explicit persistence of excitation condition to characterize observability of the full pose, ensuring reconstruction of the scale parameter that is not directly observable in the epipolar construction.

eess.SY↗

arXiv2023

Nonlinear constructive observer design for direct homography estimation

Feature-based homography estimation approaches rely on extensive image processing for feature extraction and matching, and do not adequately account for the information provided by the image. Therefore, developing efficient direct techniques to extract the homography from images is essential. This paper presents a novel nonlinear direct homography observer that exploits the Lie group structure of $\mathbf{SL}(3)$ and its action on the space of image maps. Theoretical analysis demonstrates local asymptotic convergence of the observer. The observer design is also extended for partial measurements of velocity under the assumption that the unknown component is constant or slowly time-varying. Finally, simulation results demonstrate the performance of the proposed solutions on real images.

eess.SY↗