arXiv subjects

Teppo Häyrynen

Publications and source records attributed to Teppo Häyrynen.

14 recordsLinked to original sources

arXiv2018

Benchmarking five numerical simulation techniques for computing resonance wavelengths and quality factors in photonic crystal membrane line defect cavities

We present numerical studies of two photonic crystal membrane microcavities, a short line-defect cavity with relatively low quality ($Q$) factor and a longer cavity with high $Q$. We use five state-of-the-art numerical simulation techniques to compute the cavity $Q$ factor and the resonance wavelength $λ$ for the fundamental cavity mode in both structures. For each method, the relevant computational parameters are systematically varied to estimate the computational uncertainty. We show that some methods are more suitable than others for treating these challenging geometries.

physics.comp-ph↗

arXiv2017

Enhanced Photon Extraction from a Nanowire Quantum Dot Using a Bottom-Up Photonic Shell

Semiconductor nanowires offer the possibility to grow high-quality quantum-dot heterostructures, and, in particular, CdSe quantum dots inserted in ZnSe nanowires have demonstrated the ability to emit single photons up to room temperature. In this paper, we demonstrate a bottom-up approach to fabricate a photonic fiberlike structure around such nanowire quantum dots by depositing an oxide shell using atomic-layer deposition. Simulations suggest that the intensity collected in our NA = 0.6 microscope objective can be increased by a factor 7 with respect to the bare nanowire case. Combining microphotoluminescence, decay time measurements, and numerical simulations, we obtain a fourfold increase in the collected photoluminescence from the quantum dot. We show that this improvement is due to an increase of the quantum-dot emission rate and a redirection of the emitted light. Our ex situ fabrication technique allows a precise and reproducible fabrication on a large scale. Its improved extraction efficiency is compared to state-of-the-art top-down devices.

physics.optics↗

arXiv2017

Photon momentum and optical forces in cavities

During the past century, the electromagnetic field momentum in material media has been under debate in the Abraham-Minkowski controversy as convincing arguments have been advanced in favor of both the Abraham and Minkowski forms of photon momentum. Here we study the photon momentum and optical forces in cavity structures in the cases of dynamical and steady-state fields. In the description of the single-photon transmission process, we use a field-kinetic one-photon theory. Our model suggests that in the medium photons couple with the induced atomic dipoles forming polariton quasiparticles with the Minkowski form momentum. The Abraham momentum can be associated to the electromagnetic field part of the coupled polariton state. The polariton with the Minkowski momentum is shown to obey the uniform center of mass of energy motion that has previously been interpreted to support only the Abraham momentum. When describing the steady-state nonequilibrium field distributions we use the recently developed quantized fluctuational electrodynamics (QFED) formalism. While allowing detailed studies of light propagation and quantum field fluctuations in interfering structures, our methods also provide practical tools for modeling optical energy transfer and the formation of thermal balance in nanodevices as well as studying electromagnetic forces in optomechanical devices.

quant-ph↗

arXiv2017

Photon mass drag and the momentum of light in a medium

Conventional theories of electromagnetic waves in a medium assume that the energy propagating with the light pulse in the medium is entirely carried by the field. Thus, the possibility that the optical force field of the light pulse would drive forward an atomic mass density wave (MDW) and the related kinetic and elastic energies is neglected. In this work, we present foundations of a covariant theory of light propagation in a medium by considering a light wave simultaneously with the dynamics of the medium atoms driven by optoelastic forces between the induced dipoles and the electromagnetic field. We prove that the transfer of mass as MDW associated with the light pulse, the photon mass drag effect, gives an essential contribution to the total momentum of the light pulse, which becomes equal to the Minkowski momentum. Thus, our theory also resolves the centenary Abraham-Minkowski controversy of the momentum of light in a nondispersive medium. We derive the photon mass drag effect using two independent but complementary covariant models. In the mass-polariton (MP) quasiparticle approach, we consider the light pulse as a coupled state between the photon and matter, isolated from the rest of the medium. The momentum and the transferred mass of MP follow unambiguously from the Lorentz invariance and the fundamental conservation laws of nature. To enable the calculation of the mass and momentum distribution of a light pulse, we have also generalized the electrodynamics of continuous media to account for the optoelastic dynamics of the medium. In this optoelastic continuum dynamics (OCD) approach, we obtain a numerically accurate solution of the Newtonian continuum dynamics of the medium when the light pulse is propagating in it. We finally discuss a possibility of an optical waveguide setup for experimental measurement of the transferred mass of the light pulse.

physics.optics↗

arXiv2017

Modeling open nanophotonic systems using the Fourier modal method: Generalization to 3D Cartesian coordinates

Recently, an open geometry Fourier modal method based on a new combination of an open boundary condition and a non-uniform $k$-space discretization was introduced for rotationally symmetric structures providing a more efficient approach for modeling nanowires and micropillar cavities [J. Opt. Soc. Am. A 33, 1298 (2016)]. Here, we generalize the approach to three-dimensional (3D) Cartesian coordinates allowing for the modeling of rectangular geometries in open space. The open boundary condition is a consequence of having an infinite computational domain described using basis functions that expand the whole space. The strength of the method lies in discretizing the Fourier integrals using a non-uniform circular "dartboard" sampling of the Fourier $k$ space. We show that our sampling technique leads to a more accurate description of the continuum of the radiation modes that leak out from the structure. We also compare our approach to conventional discretization with direct and inverse factorization rules commonly used in established Fourier modal methods. We apply our method to a variety of optical waveguide structures and demonstrate that the method leads to a significantly improved convergence enabling more accurate and efficient modeling of open 3D nanophotonic structures.

physics.optics↗

arXiv2017

Generalized noise terms for the quantized fluctuational electrodynamics

The quantization of optical fields in vacuum has been known for decades, but extending the field quantization to lossy and dispersive media in nonequilibrium conditions has proven to be complicated due to the position-dependent electric and magnetic responses of the media. In fact, consistent position-dependent quantum models for the photon number in resonant structures have only been formulated very recently and only for dielectric media. Here we present a general position-dependent quantized fluctuational electrodynamics (QFED) formalism that extends the consistent field quantization to describe the photon number also in the presence of magnetic field-matter interactions. It is shown that the magnetic fluctuations provide an additional degree of freedom in media where the magnetic coupling to the field is prominent. Therefore, the field quantization requires an additional independent noise operator that is commuting with the conventional bosonic noise operator describing the polarization current fluctuations in dielectric media. In addition to allowing the detailed description of field fluctuations, our methods provide practical tools for modeling optical energy transfer and the formation of thermal balance in general dielectric and magnetic nanodevices. We use the QFED to investigate the magnetic properties of microcavity systems to demonstrate an example geometry in which it is possible to probe fields arising from the electric and magnetic source terms. We show that, as a consequence of the magnetic Purcell effect, the tuning of the position of an emitter layer placed inside a vacuum cavity can make the emissivity of a magnetic emitter to exceed the emissivity of a corresponding electric emitter.

quant-ph↗

arXiv2017

Quantized fluctuational electrodynamics for three-dimensional plasmonic structures

We recently introduced a quantized fluctuational electrodynamics (QFED) formalism that provides a physically insightful definition of an effective position-dependent photon-number operator and the associated ladder operators. However, this far the formalism has been applicable only for the normal incidence of the electromagnetic field in planar structures. In this work, we overcome the main limitation of the one-dimensional QFED formalism by extending the model to three dimensions, allowing us to use the QFED method to study, e.g., plasmonic structures. To demonstrate the benefits of the developed formalism, we apply it to study the local steady-state photon numbers and field temperatures in a light-emitting near-surface InGaN quantum-well structure with a metallic coating supporting surface plasmons.

quant-ph↗

arXiv2016

Open geometry Fourier modal method: Modeling nanophotonic structures in infinite domains

We present an open geometry Fourier modal method based on a new combination of open boundary conditions and an efficient $k$-space discretization. The open boundary of the computational domain is obtained using basis functions that expand the whole space, and the integrals subsequently appearing due to the continuous nature of the radiation modes are handled using a discretization based on non-uniform sampling of the $k$-space. We apply the method to a variety of photonic structures and demonstrate that our method leads to significantly improved convergence with respect to the number of degrees of freedom, which may pave the way for more accurate and efficient modeling of open nanophotonic structures.

physics.comp-ph↗

arXiv2015

Commutation-relation-preserving ladder operators for propagating optical fields in nonuniform lossy media

We have recently developed a quantized fluctuational electrodynamics (QFED) formalism to describe the quantum aspects of local thermal balance formation and to formulate the electromagnetic field ladder operators so that they no longer exhibit the anomalies reported for resonant structures. Here we show how the QFED can be used to resolve between the left and right propagating fields to bridge the QFED and the quantum optical input-output relations commonly used to describe selected quantum aspects of resonators. The generalized model introduces a density of states concept describing interference effects, which is instrumental in allowing an unambiguous separation of the fields and related quantum operators into left and right propagating parts. In addition to providing insight on the quantum treatment of interference, our results also provide the conclusive resolution of the long-standing enigma of the anomalous commutation relations of partially confined propagating fields.

quant-ph↗

arXiv2014

Position-dependent photon operators in the quantization of the electromagnetic field in dielectrics at local thermal equilibrium

It has very recently been suggested that asymmetric coupling of electromagnetic fields to thermal reservoirs under nonequilibrium conditions can produce unexpected oscillatory behavior in the local photon statistics in layered structures. Better understanding of the predicted phenomena could enable useful applications related to thermometry, noise filtering, and enhancing optical interactions. In this work we briefly review the field quantization and study the local steady state temperature distributions in optical cavities formed of lossless and lossy media to show that also local field temperatures exhibit oscillations that depend on position as well as the photon energy.

quant-ph↗

arXiv2014

Unified position-dependent photon-number quantization in layered structures

We have recently developed a position-dependent quantization scheme for describing the ladder and effective photon-number operators associated with the electric field to analyze quantum optical energy transfer in lossy and dispersive dielectrics [Phys. Rev. A, 89, 033831 (2014)]. While having a simple connection to the thermal balance of the system, these operators only described the electric field and its coupling to lossy dielectric bodies. Here we extend this field quantization scheme to include the magnetic field and thus to enable description of the total electromagnetic field and discuss conceptual measurement schemes to verify the predictions. In addition to conveniently describing the formation of thermal balance, the generalized approach allows modeling of the electromagnetic pressure and Casimir forces. We apply the formalism to study the local steady state field temperature distributions and electromagnetic force density in cavities with cavity walls at different temperatures. The calculated local electric and magnetic field temperatures exhibit oscillations that depend on the position as well as the photon energy. However, the effective photon number and field temperature associated with the total electromagnetic field is always position-independent in lossless media. Furthermore, we show that the direction of the electromagnetic force varies as a function of frequency, position, and material thickness.

quant-ph↗

arXiv2014

Thermal balance and photon-number quantization in layered structures

The quantization of the electromagnetic field in lossy and dispersive dielectric media has been widely studied during the last few decades. However, several aspects of energy transfer and its relation to consistently defining position-dependent ladder operators for the electromagnetic field in nonequilibrium conditions have partly escaped the attention. In this work we define the position-dependent ladder operators and an effective local photon-number operator that are consistent with the canonical commutation relations and use these concepts to describe the energy transfer and thermal balance in layered geometries. This approach results in a position-dependent photon-number concept that is simple and consistent with classical energy conservation arguments. The operators are formed by first calculating the vector potential operator using Green's function formalism and Langevin noise source operators related to the medium and its temperature, and then defining the corresponding position-dependent annihilation operator that is required to satisfy the canonical commutation relations in arbitrary geometry. Our results suggest that the effective photon number associated with the electric field is generally position dependent and enables a straightforward method to calculate the energy transfer rate between the field and the local medium. In particular, our results predict that the effective photon number in a vacuum cavity formed between two lossy material layers can oscillate as a function of the position suggesting that also the local field temperature oscillates. These oscillations are expected to be directly observable using relatively straightforward experimental setups in which the field-matter interaction is dominated by the coupling to the electric field.

quant-ph↗

arXiv2013

Noiseless amplification of weak coherent fields exploiting energy fluctuations of the field

Quantum optics dictates that amplification of a pure state by any linear deterministic amplifier always introduces noise in the signal and results in a mixed output state. However, it has recently been shown that noiseless amplification becomes possible if the requirement of a deterministic operation is relaxed. Here we propose and analyze a noiseless amplification scheme where the energy required to amplify the signal originates from the stochastic fluctuations in the field itself. In contrast to previous amplification setups, our setup shows that a signal can be amplified even if no energy is added to the signal from external sources. We investigate the relation between the amplification and its success rate as well as the statistics of the output states after successful and failed amplification processes. Furthermore, we also optimize the setup to find the maximum success rates in terms of the reflectivities of the beam splitters used in the setup and discuss the relation of our setup with the previous setups.

quant-ph↗

arXiv2013

Noiseless amplification of weak coherent fields without external energy

According to the fundamental laws of quantum optics, noise is necessarily added to the system when one tries to clone or amplify a quantum state. However, it has recently been shown that the quantum noise related to the operation of a linear phase-insensitive amplifier can be avoided when the requirement of a deterministic operation is relaxed. Nondeterministic noiseless linear amplifiers are therefore realizable. Usually nondeterministic amplifiers rely on using single photon sources. We have, in contrast, recently proposed an amplification scheme in which no external energy is added to the signal, but the energy required to amplify the signal originates from the stochastic fluctuations in the field itself. Applying our amplification scheme, we examine the amplifier gain and the success rate as well as the properties of the output states after successful and failed amplification processes. We also optimize the setup to find the maximum success rates in terms of the reflectivities of the beam splitters used in the setup. In addition, we discuss the nonidealities related to the operation of our setup and the relation of our setup with the previous setups.

quant-ph↗